configs/example/memcheck.py - public/gem5 - Git at Google

 # Copyright (c) 2015-2016 ARM Limited
 # All rights reserved.
 #
 # The license below extends only to copyright in the software and shall
 # not be construed as granting a license to any other intellectual
 # property including but not limited to intellectual property relating
 # to a hardware implementation of the functionality of the software
 # licensed hereunder.  You may use the software subject to the license
 # terms below provided that you ensure that this notice is replicated
 # unmodified and in its entirety in all distributions of the software,
 # modified or unmodified, in source code or in binary form.
 #
 # Copyright (c) 2006-2007 The Regents of The University of Michigan
 # All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are
 # met: redistributions of source code must retain the above copyright
 # notice, this list of conditions and the following disclaimer;
 # redistributions in binary form must reproduce the above copyright
 # notice, this list of conditions and the following disclaimer in the
 # documentation and/or other materials provided with the distribution;
 # neither the name of the copyright holders nor the names of its
 # contributors may be used to endorse or promote products derived from
 # this software without specific prior written permission.
 #
 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 from __future__ import print_function
 from __future__ import absolute_import

 import optparse
 import random
 import sys

 import m5
 from m5.objects import *

 parser = optparse.OptionParser()

 parser.add_option("-a", "--atomic", action="store_true",
                   help="Use atomic (non-timing) mode")
 parser.add_option("-b", "--blocking", action="store_true",
                   help="Use blocking caches")
 parser.add_option("-m", "--maxtick", type="int", default=m5.MaxTick,
                   metavar="T",
                   help="Stop after T ticks")
 parser.add_option("-p", "--prefetchers", action="store_true",
                   help="Use prefetchers")
 parser.add_option("-s", "--stridepref", action="store_true",
                   help="Use strided prefetchers")

 # This example script has a lot in common with the memtest.py in that
 # it is designed to stress tests the memory system. However, this
 # script uses oblivious traffic generators to create the stimuli, and
 # couples them with memcheckers to verify that the data read matches
 # the allowed outcomes. Just like memtest.py, the traffic generators
 # and checkers are placed in a tree topology. At the bottom of the
 # tree is a shared memory, and then at each level a number of
 # generators and checkers are attached, along with a number of caches
 # that them selves fan out to subtrees of generators and caches. Thus,
 # it is possible to create a system with arbitrarily deep cache
 # hierarchies, sharing or no sharing of caches, and generators not
 # only at the L1s, but also at the L2s, L3s etc.
 #
 # The tree specification consists of two colon-separated lists of one
 # or more integers, one for the caches, and one for the
 # testers/generators. The first integer is the number of
 # caches/testers closest to main memory. Each cache then fans out to a
 # subtree. The last integer in the list is the number of
 # caches/testers associated with the uppermost level of memory. The
 # other integers (if any) specify the number of caches/testers
 # connected at each level of the crossbar hierarchy. The tester string
 # should have one element more than the cache string as there should
 # always be testers attached to the uppermost caches.
 #
 # Since this script tests actual sharing, there is also a possibility
 # to stress prefetching and the interaction between prefetchers and
 # caches. The traffic generators switch between random address streams
 # and linear address streams to ensure that the prefetchers will
 # trigger. By default prefetchers are off.

 parser.add_option("-c", "--caches", type="string", default="3:2",
                   help="Colon-separated cache hierarchy specification, "
                   "see script comments for details "
                   "[default: %default]")
 parser.add_option("-t", "--testers", type="string", default="1:0:2",
                   help="Colon-separated tester hierarchy specification, "
                   "see script comments for details "
                   "[default: %default]")
 parser.add_option("-r", "--random", action="store_true",
                   help="Generate a random tree topology")
 parser.add_option("--sys-clock", action="store", type="string",
                   default='1GHz',
                   help = """Top-level clock for blocks running at system
                   speed""")

 (options, args) = parser.parse_args()

 if args:
      print("Error: script doesn't take any positional arguments")
      sys.exit(1)

 # Start by parsing the command line options and do some basic sanity
 # checking
 if options.random:
      # Generate a tree with a valid number of testers
      tree_depth = random.randint(1, 4)
      cachespec = [random.randint(1, 3) for i in range(tree_depth)]
      testerspec = [random.randint(1, 3) for i in range(tree_depth + 1)]
      print("Generated random tree -c", ':'.join(map(str, cachespec)),
          "-t", ':'.join(map(str, testerspec)))
 else:
      try:
           cachespec = [int(x) for x in options.caches.split(':')]
           testerspec = [int(x) for x in options.testers.split(':')]
      except:
           print("Error: Unable to parse caches or testers option")
           sys.exit(1)

      if len(cachespec) < 1:
           print("Error: Must have at least one level of caches")
           sys.exit(1)

      if len(cachespec) != len(testerspec) - 1:
           print("Error: Testers must have one element more than caches")
           sys.exit(1)

      if testerspec[-1] == 0:
           print("Error: Must have testers at the uppermost level")
           sys.exit(1)

      for t in testerspec:
           if t < 0:
                print("Error: Cannot have a negative number of testers")
                sys.exit(1)

      for c in cachespec:
           if c < 1:
                print("Error: Must have 1 or more caches at each level")
                sys.exit(1)

 # Determine the tester multiplier for each level as the string
 # elements are per subsystem and it fans out
 multiplier = [1]
 for c in cachespec:
      if c < 1:
           print("Error: Must have at least one cache per level")
      multiplier.append(multiplier[-1] * c)

 numtesters = 0
 for t, m in zip(testerspec, multiplier):
      numtesters += t * m

 # Define a prototype L1 cache that we scale for all successive levels
 proto_l1 = Cache(size = '32kB', assoc = 4,
                  tag_latency = 1, data_latency = 1, response_latency = 1,
                  tgts_per_mshr = 8)

 if options.blocking:
      proto_l1.mshrs = 1
 else:
      proto_l1.mshrs = 4

 if options.prefetchers:
      proto_l1.prefetcher = TaggedPrefetcher()
 elif options.stridepref:
      proto_l1.prefetcher = StridePrefetcher()

 cache_proto = [proto_l1]

 # Now add additional cache levels (if any) by scaling L1 params, the
 # first element is Ln, and the last element L1
 for scale in cachespec[:-1]:
      # Clone previous level and update params
      prev = cache_proto[0]
      next = prev()
      next.size = prev.size * scale
      next.tag_latency = prev.tag_latency * 10
      next.data_latency = prev.data_latency * 10
      next.response_latency = prev.response_latency * 10
      next.assoc = prev.assoc * scale
      next.mshrs = prev.mshrs * scale
      cache_proto.insert(0, next)

 # Create a config to be used by all the traffic generators
 cfg_file_name = "memcheck.cfg"
 cfg_file_path = os.path.dirname(__file__) + "/" +cfg_file_name
 cfg_file = open(cfg_file_path, 'w')

 # Three states, with random, linear and idle behaviours. The random
 # and linear states access memory in the range [0 : 16 Mbyte] with 8
 # byte and 64 byte accesses respectively.
 cfg_file.write("STATE 0 10000000 RANDOM 65 0 16777216 8 50000 150000 0\n")
 cfg_file.write("STATE 1 10000000 LINEAR 65 0 16777216 64 50000 150000 0\n")
 cfg_file.write("STATE 2 10000000 IDLE\n")
 cfg_file.write("INIT 0\n")
 cfg_file.write("TRANSITION 0 1 0.5\n")
 cfg_file.write("TRANSITION 0 2 0.5\n")
 cfg_file.write("TRANSITION 1 0 0.5\n")
 cfg_file.write("TRANSITION 1 2 0.5\n")
 cfg_file.write("TRANSITION 2 0 0.5\n")
 cfg_file.write("TRANSITION 2 1 0.5\n")
 cfg_file.close()

 # Make a prototype for the tester to be used throughout
 proto_tester = TrafficGen(config_file = cfg_file_path)

 # Set up the system along with a DRAM controller
 system = System(physmem = DDR3_1600_8x8())

 system.voltage_domain = VoltageDomain(voltage = '1V')

 system.clk_domain = SrcClockDomain(clock =  options.sys_clock,
                         voltage_domain = system.voltage_domain)

 system.memchecker = MemChecker()

 # For each level, track the next subsys index to use
 next_subsys_index = [0] * (len(cachespec) + 1)

 # Recursive function to create a sub-tree of the cache and tester
 # hierarchy
 def make_cache_level(ncaches, prototypes, level, next_cache):
      global next_subsys_index, proto_l1, testerspec, proto_tester

      index = next_subsys_index[level]
      next_subsys_index[level] += 1

      # Create a subsystem to contain the crossbar and caches, and
      # any testers
      subsys = SubSystem()
      setattr(system, 'l%dsubsys%d' % (level, index), subsys)

      # The levels are indexing backwards through the list
      ntesters = testerspec[len(cachespec) - level]

      testers = [proto_tester() for i in range(ntesters)]
      checkers = [MemCheckerMonitor(memchecker = system.memchecker) \
                       for i in range(ntesters)]
      if ntesters:
           subsys.tester = testers
           subsys.checkers = checkers

      if level != 0:
           # Create a crossbar and add it to the subsystem, note that
           # we do this even with a single element on this level
           xbar = L2XBar(width = 32)
           subsys.xbar = xbar
           if next_cache:
                xbar.master = next_cache.cpu_side

           # Create and connect the caches, both the ones fanning out
           # to create the tree, and the ones used to connect testers
           # on this level
           tree_caches = [prototypes[0]() for i in range(ncaches[0])]
           tester_caches = [proto_l1() for i in range(ntesters)]

           subsys.cache = tester_caches + tree_caches
           for cache in tree_caches:
                cache.mem_side = xbar.slave
                make_cache_level(ncaches[1:], prototypes[1:], level - 1, cache)
           for tester, checker, cache in zip(testers, checkers, tester_caches):
                tester.port = checker.slave
                checker.master = cache.cpu_side
                cache.mem_side = xbar.slave
      else:
           if not next_cache:
                print("Error: No next-level cache at top level")
                sys.exit(1)

           if ntesters > 1:
                # Create a crossbar and add it to the subsystem
                xbar = L2XBar(width = 32)
                subsys.xbar = xbar
                xbar.master = next_cache.cpu_side
                for tester, checker in zip(testers, checkers):
                     tester.port = checker.slave
                     checker.master = xbar.slave
           else:
                # Single tester
                testers[0].port = checkers[0].slave
                checkers[0].master = next_cache.cpu_side

 # Top level call to create the cache hierarchy, bottom up
 make_cache_level(cachespec, cache_proto, len(cachespec), None)

 # Connect the lowest level crossbar to the memory
 last_subsys = getattr(system, 'l%dsubsys0' % len(cachespec))
 last_subsys.xbar.master = system.physmem.port
 last_subsys.xbar.point_of_coherency = True

 root = Root(full_system = False, system = system)
 if options.atomic:
     root.system.mem_mode = 'atomic'
 else:
     root.system.mem_mode = 'timing'

 # The system port is never used in the tester so merely connect it
 # to avoid problems
 root.system.system_port = last_subsys.xbar.slave

 # Instantiate configuration
 m5.instantiate()

 # Simulate until program terminates
 exit_event = m5.simulate(options.maxtick)

 print('Exiting @ tick', m5.curTick(), 'because', exit_event.getCause())
	# Copyright (c) 2015-2016 ARM Limited
	# All rights reserved.
	#
	# The license below extends only to copyright in the software and shall
	# not be construed as granting a license to any other intellectual
	# property including but not limited to intellectual property relating
	# to a hardware implementation of the functionality of the software
	# licensed hereunder. You may use the software subject to the license
	# terms below provided that you ensure that this notice is replicated
	# unmodified and in its entirety in all distributions of the software,
	# modified or unmodified, in source code or in binary form.
	#
	# Copyright (c) 2006-2007 The Regents of The University of Michigan
	# All rights reserved.
	#
	# Redistribution and use in source and binary forms, with or without
	# modification, are permitted provided that the following conditions are
	# met: redistributions of source code must retain the above copyright
	# notice, this list of conditions and the following disclaimer;
	# redistributions in binary form must reproduce the above copyright
	# notice, this list of conditions and the following disclaimer in the
	# documentation and/or other materials provided with the distribution;
	# neither the name of the copyright holders nor the names of its
	# contributors may be used to endorse or promote products derived from
	# this software without specific prior written permission.
	#
	# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

	from __future__ import print_function
	from __future__ import absolute_import

	import optparse
	import random
	import sys

	import m5
	from m5.objects import *

	parser = optparse.OptionParser()

	parser.add_option("-a", "--atomic", action="store_true",
	help="Use atomic (non-timing) mode")
	parser.add_option("-b", "--blocking", action="store_true",
	help="Use blocking caches")
	parser.add_option("-m", "--maxtick", type="int", default=m5.MaxTick,
	metavar="T",
	help="Stop after T ticks")
	parser.add_option("-p", "--prefetchers", action="store_true",
	help="Use prefetchers")
	parser.add_option("-s", "--stridepref", action="store_true",
	help="Use strided prefetchers")

	# This example script has a lot in common with the memtest.py in that
	# it is designed to stress tests the memory system. However, this
	# script uses oblivious traffic generators to create the stimuli, and
	# couples them with memcheckers to verify that the data read matches
	# the allowed outcomes. Just like memtest.py, the traffic generators
	# and checkers are placed in a tree topology. At the bottom of the
	# tree is a shared memory, and then at each level a number of
	# generators and checkers are attached, along with a number of caches
	# that them selves fan out to subtrees of generators and caches. Thus,
	# it is possible to create a system with arbitrarily deep cache
	# hierarchies, sharing or no sharing of caches, and generators not
	# only at the L1s, but also at the L2s, L3s etc.
	#
	# The tree specification consists of two colon-separated lists of one
	# or more integers, one for the caches, and one for the
	# testers/generators. The first integer is the number of
	# caches/testers closest to main memory. Each cache then fans out to a
	# subtree. The last integer in the list is the number of
	# caches/testers associated with the uppermost level of memory. The
	# other integers (if any) specify the number of caches/testers
	# connected at each level of the crossbar hierarchy. The tester string
	# should have one element more than the cache string as there should
	# always be testers attached to the uppermost caches.
	#
	# Since this script tests actual sharing, there is also a possibility
	# to stress prefetching and the interaction between prefetchers and
	# caches. The traffic generators switch between random address streams
	# and linear address streams to ensure that the prefetchers will
	# trigger. By default prefetchers are off.

	parser.add_option("-c", "--caches", type="string", default="3:2",
	help="Colon-separated cache hierarchy specification, "
	"see script comments for details "
	"[default: %default]")
	parser.add_option("-t", "--testers", type="string", default="1:0:2",
	help="Colon-separated tester hierarchy specification, "
	"see script comments for details "
	"[default: %default]")
	parser.add_option("-r", "--random", action="store_true",
	help="Generate a random tree topology")
	parser.add_option("--sys-clock", action="store", type="string",
	default='1GHz',
	help = """Top-level clock for blocks running at system
	speed""")

	(options, args) = parser.parse_args()

	if args:
	print("Error: script doesn't take any positional arguments")
	sys.exit(1)

	# Start by parsing the command line options and do some basic sanity
	# checking
	if options.random:
	# Generate a tree with a valid number of testers
	tree_depth = random.randint(1, 4)
	cachespec = [random.randint(1, 3) for i in range(tree_depth)]
	testerspec = [random.randint(1, 3) for i in range(tree_depth + 1)]
	print("Generated random tree -c", ':'.join(map(str, cachespec)),
	"-t", ':'.join(map(str, testerspec)))
	else:
	try:
	cachespec = [int(x) for x in options.caches.split(':')]
	testerspec = [int(x) for x in options.testers.split(':')]
	except:
	print("Error: Unable to parse caches or testers option")
	sys.exit(1)

	if len(cachespec) < 1:
	print("Error: Must have at least one level of caches")
	sys.exit(1)

	if len(cachespec) != len(testerspec) - 1:
	print("Error: Testers must have one element more than caches")
	sys.exit(1)

	if testerspec[-1] == 0:
	print("Error: Must have testers at the uppermost level")
	sys.exit(1)

	for t in testerspec:
	if t < 0:
	print("Error: Cannot have a negative number of testers")
	sys.exit(1)

	for c in cachespec:
	if c < 1:
	print("Error: Must have 1 or more caches at each level")
	sys.exit(1)

	# Determine the tester multiplier for each level as the string
	# elements are per subsystem and it fans out
	multiplier = [1]
	for c in cachespec:
	if c < 1:
	print("Error: Must have at least one cache per level")
	multiplier.append(multiplier[-1] * c)

	numtesters = 0
	for t, m in zip(testerspec, multiplier):
	numtesters += t * m

	# Define a prototype L1 cache that we scale for all successive levels
	proto_l1 = Cache(size = '32kB', assoc = 4,
	tag_latency = 1, data_latency = 1, response_latency = 1,
	tgts_per_mshr = 8)

	if options.blocking:
	proto_l1.mshrs = 1
	else:
	proto_l1.mshrs = 4

	if options.prefetchers:
	proto_l1.prefetcher = TaggedPrefetcher()
	elif options.stridepref:
	proto_l1.prefetcher = StridePrefetcher()

	cache_proto = [proto_l1]

	# Now add additional cache levels (if any) by scaling L1 params, the
	# first element is Ln, and the last element L1
	for scale in cachespec[:-1]:
	# Clone previous level and update params
	prev = cache_proto[0]
	next = prev()
	next.size = prev.size * scale
	next.tag_latency = prev.tag_latency * 10
	next.data_latency = prev.data_latency * 10
	next.response_latency = prev.response_latency * 10
	next.assoc = prev.assoc * scale
	next.mshrs = prev.mshrs * scale
	cache_proto.insert(0, next)

	# Create a config to be used by all the traffic generators
	cfg_file_name = "memcheck.cfg"
	cfg_file_path = os.path.dirname(__file__) + "/" +cfg_file_name
	cfg_file = open(cfg_file_path, 'w')

	# Three states, with random, linear and idle behaviours. The random
	# and linear states access memory in the range [0 : 16 Mbyte] with 8
	# byte and 64 byte accesses respectively.
	cfg_file.write("STATE 0 10000000 RANDOM 65 0 16777216 8 50000 150000 0\n")
	cfg_file.write("STATE 1 10000000 LINEAR 65 0 16777216 64 50000 150000 0\n")
	cfg_file.write("STATE 2 10000000 IDLE\n")
	cfg_file.write("INIT 0\n")
	cfg_file.write("TRANSITION 0 1 0.5\n")
	cfg_file.write("TRANSITION 0 2 0.5\n")
	cfg_file.write("TRANSITION 1 0 0.5\n")
	cfg_file.write("TRANSITION 1 2 0.5\n")
	cfg_file.write("TRANSITION 2 0 0.5\n")
	cfg_file.write("TRANSITION 2 1 0.5\n")
	cfg_file.close()

	# Make a prototype for the tester to be used throughout
	proto_tester = TrafficGen(config_file = cfg_file_path)

	# Set up the system along with a DRAM controller
	system = System(physmem = DDR3_1600_8x8())

	system.voltage_domain = VoltageDomain(voltage = '1V')

	system.clk_domain = SrcClockDomain(clock = options.sys_clock,
	voltage_domain = system.voltage_domain)

	system.memchecker = MemChecker()

	# For each level, track the next subsys index to use
	next_subsys_index = [0] * (len(cachespec) + 1)

	# Recursive function to create a sub-tree of the cache and tester
	# hierarchy
	def make_cache_level(ncaches, prototypes, level, next_cache):
	global next_subsys_index, proto_l1, testerspec, proto_tester

	index = next_subsys_index[level]
	next_subsys_index[level] += 1

	# Create a subsystem to contain the crossbar and caches, and
	# any testers
	subsys = SubSystem()
	setattr(system, 'l%dsubsys%d' % (level, index), subsys)

	# The levels are indexing backwards through the list
	ntesters = testerspec[len(cachespec) - level]

	testers = [proto_tester() for i in range(ntesters)]
	checkers = [MemCheckerMonitor(memchecker = system.memchecker) \
	for i in range(ntesters)]
	if ntesters:
	subsys.tester = testers
	subsys.checkers = checkers

	if level != 0:
	# Create a crossbar and add it to the subsystem, note that
	# we do this even with a single element on this level
	xbar = L2XBar(width = 32)
	subsys.xbar = xbar
	if next_cache:
	xbar.master = next_cache.cpu_side

	# Create and connect the caches, both the ones fanning out
	# to create the tree, and the ones used to connect testers
	# on this level
	tree_caches = [prototypes[0]() for i in range(ncaches[0])]
	tester_caches = [proto_l1() for i in range(ntesters)]

	subsys.cache = tester_caches + tree_caches
	for cache in tree_caches:
	cache.mem_side = xbar.slave
	make_cache_level(ncaches[1:], prototypes[1:], level - 1, cache)
	for tester, checker, cache in zip(testers, checkers, tester_caches):
	tester.port = checker.slave
	checker.master = cache.cpu_side
	cache.mem_side = xbar.slave
	else:
	if not next_cache:
	print("Error: No next-level cache at top level")
	sys.exit(1)

	if ntesters > 1:
	# Create a crossbar and add it to the subsystem
	xbar = L2XBar(width = 32)
	subsys.xbar = xbar
	xbar.master = next_cache.cpu_side
	for tester, checker in zip(testers, checkers):
	tester.port = checker.slave
	checker.master = xbar.slave
	else:
	# Single tester
	testers[0].port = checkers[0].slave
	checkers[0].master = next_cache.cpu_side

	# Top level call to create the cache hierarchy, bottom up
	make_cache_level(cachespec, cache_proto, len(cachespec), None)

	# Connect the lowest level crossbar to the memory
	last_subsys = getattr(system, 'l%dsubsys0' % len(cachespec))
	last_subsys.xbar.master = system.physmem.port
	last_subsys.xbar.point_of_coherency = True

	root = Root(full_system = False, system = system)
	if options.atomic:
	root.system.mem_mode = 'atomic'
	else:
	root.system.mem_mode = 'timing'

	# The system port is never used in the tester so merely connect it
	# to avoid problems
	root.system.system_port = last_subsys.xbar.slave

	# Instantiate configuration
	m5.instantiate()

	# Simulate until program terminates
	exit_event = m5.simulate(options.maxtick)

	print('Exiting @ tick', m5.curTick(), 'because', exit_event.getCause())