| /* |
| * Copyright (c) 2013 Andreas Sandberg |
| * All rights reserved |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "cpu/kvm/x86_cpu.hh" |
| |
| #include <linux/kvm.h> |
| |
| #include <algorithm> |
| #include <cerrno> |
| #include <memory> |
| |
| #include "arch/registers.hh" |
| #include "arch/x86/cpuid.hh" |
| #include "arch/x86/faults.hh" |
| #include "arch/x86/interrupts.hh" |
| #include "arch/x86/regs/msr.hh" |
| #include "arch/x86/utility.hh" |
| #include "cpu/kvm/base.hh" |
| #include "debug/Drain.hh" |
| #include "debug/Kvm.hh" |
| #include "debug/KvmContext.hh" |
| #include "debug/KvmIO.hh" |
| #include "debug/KvmInt.hh" |
| |
| using namespace X86ISA; |
| |
| #define MSR_TSC 0x10 |
| |
| #define IO_PCI_CONF_ADDR 0xCF8 |
| #define IO_PCI_CONF_DATA_BASE 0xCFC |
| |
| // Task segment type of an inactive 32-bit or 64-bit task |
| #define SEG_SYS_TYPE_TSS_AVAILABLE 9 |
| // Task segment type of an active 32-bit or 64-bit task |
| #define SEG_SYS_TYPE_TSS_BUSY 11 |
| |
| // Non-conforming accessed code segment |
| #define SEG_CS_TYPE_ACCESSED 9 |
| // Non-conforming accessed code segment that can be read |
| #define SEG_CS_TYPE_READ_ACCESSED 11 |
| |
| // The lowest bit of the type field for normal segments (code and |
| // data) is used to indicate that a segment has been accessed. |
| #define SEG_TYPE_BIT_ACCESSED 1 |
| |
| struct M5_ATTR_PACKED FXSave |
| { |
| uint16_t fcw; |
| uint16_t fsw; |
| uint8_t ftwx; |
| uint8_t pad0; |
| uint16_t last_opcode; |
| union { |
| struct { |
| uint32_t fpu_ip; |
| uint16_t fpu_cs; |
| uint16_t pad1; |
| uint32_t fpu_dp; |
| uint16_t fpu_ds; |
| uint16_t pad2; |
| } ctrl32; |
| |
| struct { |
| uint64_t fpu_ip; |
| uint64_t fpu_dp; |
| } ctrl64; |
| }; |
| uint32_t mxcsr; |
| uint32_t mxcsr_mask; |
| |
| uint8_t fpr[8][16]; |
| uint8_t xmm[16][16]; |
| |
| uint64_t reserved[12]; |
| }; |
| |
| static_assert(sizeof(FXSave) == 512, "Unexpected size of FXSave"); |
| |
| #define FOREACH_IREG() \ |
| do { \ |
| APPLY_IREG(rax, INTREG_RAX); \ |
| APPLY_IREG(rbx, INTREG_RBX); \ |
| APPLY_IREG(rcx, INTREG_RCX); \ |
| APPLY_IREG(rdx, INTREG_RDX); \ |
| APPLY_IREG(rsi, INTREG_RSI); \ |
| APPLY_IREG(rdi, INTREG_RDI); \ |
| APPLY_IREG(rsp, INTREG_RSP); \ |
| APPLY_IREG(rbp, INTREG_RBP); \ |
| APPLY_IREG(r8, INTREG_R8); \ |
| APPLY_IREG(r9, INTREG_R9); \ |
| APPLY_IREG(r10, INTREG_R10); \ |
| APPLY_IREG(r11, INTREG_R11); \ |
| APPLY_IREG(r12, INTREG_R12); \ |
| APPLY_IREG(r13, INTREG_R13); \ |
| APPLY_IREG(r14, INTREG_R14); \ |
| APPLY_IREG(r15, INTREG_R15); \ |
| } while (0) |
| |
| #define FOREACH_SREG() \ |
| do { \ |
| APPLY_SREG(cr0, MISCREG_CR0); \ |
| APPLY_SREG(cr2, MISCREG_CR2); \ |
| APPLY_SREG(cr3, MISCREG_CR3); \ |
| APPLY_SREG(cr4, MISCREG_CR4); \ |
| APPLY_SREG(cr8, MISCREG_CR8); \ |
| APPLY_SREG(efer, MISCREG_EFER); \ |
| APPLY_SREG(apic_base, MISCREG_APIC_BASE); \ |
| } while (0) |
| |
| #define FOREACH_DREG() \ |
| do { \ |
| APPLY_DREG(db[0], MISCREG_DR0); \ |
| APPLY_DREG(db[1], MISCREG_DR1); \ |
| APPLY_DREG(db[2], MISCREG_DR2); \ |
| APPLY_DREG(db[3], MISCREG_DR3); \ |
| APPLY_DREG(dr6, MISCREG_DR6); \ |
| APPLY_DREG(dr7, MISCREG_DR7); \ |
| } while (0) |
| |
| #define FOREACH_SEGMENT() \ |
| do { \ |
| APPLY_SEGMENT(cs, MISCREG_CS - MISCREG_SEG_SEL_BASE); \ |
| APPLY_SEGMENT(ds, MISCREG_DS - MISCREG_SEG_SEL_BASE); \ |
| APPLY_SEGMENT(es, MISCREG_ES - MISCREG_SEG_SEL_BASE); \ |
| APPLY_SEGMENT(fs, MISCREG_FS - MISCREG_SEG_SEL_BASE); \ |
| APPLY_SEGMENT(gs, MISCREG_GS - MISCREG_SEG_SEL_BASE); \ |
| APPLY_SEGMENT(ss, MISCREG_SS - MISCREG_SEG_SEL_BASE); \ |
| APPLY_SEGMENT(tr, MISCREG_TR - MISCREG_SEG_SEL_BASE); \ |
| APPLY_SEGMENT(ldt, MISCREG_TSL - MISCREG_SEG_SEL_BASE); \ |
| } while (0) |
| |
| #define FOREACH_DTABLE() \ |
| do { \ |
| APPLY_DTABLE(gdt, MISCREG_TSG - MISCREG_SEG_SEL_BASE); \ |
| APPLY_DTABLE(idt, MISCREG_IDTR - MISCREG_SEG_SEL_BASE); \ |
| } while (0) |
| |
| template<typename STRUCT, typename ENTRY> |
| static STRUCT *newVarStruct(size_t entries) |
| { |
| return (STRUCT *)operator new(sizeof(STRUCT) + entries * sizeof(ENTRY)); |
| } |
| |
| static void |
| dumpKvm(const struct kvm_regs ®s) |
| { |
| inform("KVM register state:\n"); |
| |
| #define APPLY_IREG(kreg, mreg) \ |
| inform("\t" # kreg ": 0x%llx\n", regs.kreg) |
| |
| FOREACH_IREG(); |
| |
| #undef APPLY_IREG |
| |
| inform("\trip: 0x%llx\n", regs.rip); |
| inform("\trflags: 0x%llx\n", regs.rflags); |
| } |
| |
| static void |
| dumpKvm(const char *reg_name, const struct kvm_segment &seg) |
| { |
| inform("\t%s: @0x%llx+%x [sel: 0x%x, type: 0x%x]\n" |
| "\t\tpres.: %u, dpl: %u, db: %u, s: %u, l: %u, g: %u, avl: %u, unus.: %u\n", |
| reg_name, |
| seg.base, seg.limit, seg.selector, seg.type, |
| seg.present, seg.dpl, seg.db, seg.s, seg.l, seg.g, seg.avl, seg.unusable); |
| } |
| |
| static void |
| dumpKvm(const char *reg_name, const struct kvm_dtable &dtable) |
| { |
| inform("\t%s: @0x%llx+%x\n", |
| reg_name, dtable.base, dtable.limit); |
| } |
| |
| static void |
| dumpKvm(const struct kvm_sregs &sregs) |
| { |
| #define APPLY_SREG(kreg, mreg) \ |
| inform("\t" # kreg ": 0x%llx\n", sregs.kreg); |
| #define APPLY_SEGMENT(kreg, idx) \ |
| dumpKvm(# kreg, sregs.kreg); |
| #define APPLY_DTABLE(kreg, idx) \ |
| dumpKvm(# kreg, sregs.kreg); |
| |
| inform("Special registers:\n"); |
| FOREACH_SEGMENT(); |
| FOREACH_SREG(); |
| FOREACH_DTABLE(); |
| |
| inform("Interrupt Bitmap:"); |
| for (int i = 0; i < KVM_NR_INTERRUPTS; i += 64) |
| inform(" 0x%.8x", sregs.interrupt_bitmap[i / 64]); |
| |
| #undef APPLY_SREG |
| #undef APPLY_SEGMENT |
| #undef APPLY_DTABLE |
| } |
| |
| #ifdef KVM_GET_DEBUGREGS |
| static void |
| dumpKvm(const struct kvm_debugregs ®s) |
| { |
| inform("KVM debug state:\n"); |
| |
| #define APPLY_DREG(kreg, mreg) \ |
| inform("\t" # kreg ": 0x%llx\n", regs.kreg) |
| |
| FOREACH_DREG(); |
| |
| #undef APPLY_DREG |
| |
| inform("\tflags: 0x%llx\n", regs.flags); |
| } |
| #endif |
| |
| static void |
| dumpFpuSpec(const struct FXSave &xs) |
| { |
| inform("\tlast_ip: 0x%x\n", xs.ctrl64.fpu_ip); |
| inform("\tlast_dp: 0x%x\n", xs.ctrl64.fpu_dp); |
| inform("\tmxcsr_mask: 0x%x\n", xs.mxcsr_mask); |
| } |
| |
| static void |
| dumpFpuSpec(const struct kvm_fpu &fpu) |
| { |
| inform("\tlast_ip: 0x%x\n", fpu.last_ip); |
| inform("\tlast_dp: 0x%x\n", fpu.last_dp); |
| } |
| |
| template<typename T> |
| static void |
| dumpFpuCommon(const T &fpu) |
| { |
| const unsigned top((fpu.fsw >> 11) & 0x7); |
| inform("\tfcw: 0x%x\n", fpu.fcw); |
| |
| inform("\tfsw: 0x%x (top: %i, " |
| "conditions: %s%s%s%s, exceptions: %s%s%s%s%s%s %s%s%s)\n", |
| fpu.fsw, top, |
| |
| (fpu.fsw & CC0Bit) ? "C0" : "", |
| (fpu.fsw & CC1Bit) ? "C1" : "", |
| (fpu.fsw & CC2Bit) ? "C2" : "", |
| (fpu.fsw & CC3Bit) ? "C3" : "", |
| |
| (fpu.fsw & IEBit) ? "I" : "", |
| (fpu.fsw & DEBit) ? "D" : "", |
| (fpu.fsw & ZEBit) ? "Z" : "", |
| (fpu.fsw & OEBit) ? "O" : "", |
| (fpu.fsw & UEBit) ? "U" : "", |
| (fpu.fsw & PEBit) ? "P" : "", |
| |
| (fpu.fsw & StackFaultBit) ? "SF " : "", |
| (fpu.fsw & ErrSummaryBit) ? "ES " : "", |
| (fpu.fsw & BusyBit) ? "BUSY " : "" |
| ); |
| inform("\tftwx: 0x%x\n", fpu.ftwx); |
| inform("\tlast_opcode: 0x%x\n", fpu.last_opcode); |
| dumpFpuSpec(fpu); |
| inform("\tmxcsr: 0x%x\n", fpu.mxcsr); |
| inform("\tFP Stack:\n"); |
| for (int i = 0; i < 8; ++i) { |
| const unsigned reg_idx((i + top) & 0x7); |
| const bool empty(!((fpu.ftwx >> reg_idx) & 0x1)); |
| const double value(X86ISA::loadFloat80(fpu.fpr[i])); |
| char hex[33]; |
| for (int j = 0; j < 10; ++j) |
| snprintf(&hex[j*2], 3, "%.2x", fpu.fpr[i][j]); |
| inform("\t\tST%i/%i: 0x%s (%f)%s\n", i, reg_idx, |
| hex, value, empty ? " (e)" : ""); |
| } |
| inform("\tXMM registers:\n"); |
| for (int i = 0; i < 16; ++i) { |
| char hex[33]; |
| for (int j = 0; j < 16; ++j) |
| snprintf(&hex[j*2], 3, "%.2x", fpu.xmm[i][j]); |
| inform("\t\t%i: 0x%s\n", i, hex); |
| } |
| } |
| |
| static void |
| dumpKvm(const struct kvm_fpu &fpu) |
| { |
| inform("FPU registers:\n"); |
| dumpFpuCommon(fpu); |
| } |
| |
| static void |
| dumpKvm(const struct kvm_xsave &xsave) |
| { |
| inform("FPU registers (XSave):\n"); |
| dumpFpuCommon(*(FXSave *)xsave.region); |
| } |
| |
| static void |
| dumpKvm(const struct kvm_msrs &msrs) |
| { |
| inform("MSRs:\n"); |
| |
| for (int i = 0; i < msrs.nmsrs; ++i) { |
| const struct kvm_msr_entry &e(msrs.entries[i]); |
| |
| inform("\t0x%x: 0x%x\n", e.index, e.data); |
| } |
| } |
| |
| static void |
| dumpKvm(const struct kvm_xcrs ®s) |
| { |
| inform("KVM XCR registers:\n"); |
| |
| inform("\tFlags: 0x%x\n", regs.flags); |
| for (int i = 0; i < regs.nr_xcrs; ++i) { |
| inform("\tXCR[0x%x]: 0x%x\n", |
| regs.xcrs[i].xcr, |
| regs.xcrs[i].value); |
| } |
| } |
| |
| static void |
| dumpKvm(const struct kvm_vcpu_events &events) |
| { |
| inform("vCPU events:\n"); |
| |
| inform("\tException: [inj: %i, nr: %i, has_ec: %i, ec: %i]\n", |
| events.exception.injected, events.exception.nr, |
| events.exception.has_error_code, events.exception.error_code); |
| |
| inform("\tInterrupt: [inj: %i, nr: %i, soft: %i]\n", |
| events.interrupt.injected, events.interrupt.nr, |
| events.interrupt.soft); |
| |
| inform("\tNMI: [inj: %i, pending: %i, masked: %i]\n", |
| events.nmi.injected, events.nmi.pending, |
| events.nmi.masked); |
| |
| inform("\tSIPI vector: 0x%x\n", events.sipi_vector); |
| inform("\tFlags: 0x%x\n", events.flags); |
| } |
| |
| static bool |
| isCanonicalAddress(uint64_t addr) |
| { |
| // x86-64 doesn't currently use the full 64-bit virtual address |
| // space, instead it uses signed 48 bit addresses that are |
| // sign-extended to 64 bits. Such addresses are known as |
| // "canonical". |
| uint64_t upper_half(addr & 0xffff800000000000ULL); |
| return upper_half == 0 || upper_half == 0xffff800000000000; |
| } |
| |
| static void |
| checkSeg(const char *name, const int idx, const struct kvm_segment &seg, |
| struct kvm_sregs sregs) |
| { |
| // Check the register base |
| switch (idx) { |
| case MISCREG_TSL: |
| case MISCREG_TR: |
| case MISCREG_FS: |
| case MISCREG_GS: |
| if (!isCanonicalAddress(seg.base)) |
| warn("Illegal %s base: 0x%x\n", name, seg.base); |
| break; |
| |
| case MISCREG_SS: |
| case MISCREG_DS: |
| case MISCREG_ES: |
| if (seg.unusable) |
| break; |
| M5_FALLTHROUGH; |
| case MISCREG_CS: |
| if (seg.base & 0xffffffff00000000ULL) |
| warn("Illegal %s base: 0x%x\n", name, seg.base); |
| break; |
| } |
| |
| // Check the type |
| switch (idx) { |
| case MISCREG_CS: |
| switch (seg.type) { |
| case 3: |
| if (seg.dpl != 0) |
| warn("CS type is 3 but dpl != 0.\n"); |
| break; |
| case 9: |
| case 11: |
| if (seg.dpl != sregs.ss.dpl) |
| warn("CS type is %i but CS DPL != SS DPL\n", seg.type); |
| break; |
| case 13: |
| case 15: |
| if (seg.dpl > sregs.ss.dpl) |
| warn("CS type is %i but CS DPL > SS DPL\n", seg.type); |
| break; |
| default: |
| warn("Illegal CS type: %i\n", seg.type); |
| break; |
| } |
| break; |
| |
| case MISCREG_SS: |
| if (seg.unusable) |
| break; |
| switch (seg.type) { |
| case 3: |
| if (sregs.cs.type == 3 && seg.dpl != 0) |
| warn("CS type is 3, but SS DPL is != 0.\n"); |
| M5_FALLTHROUGH; |
| case 7: |
| if (!(sregs.cr0 & 1) && seg.dpl != 0) |
| warn("SS DPL is %i, but CR0 PE is 0\n", seg.dpl); |
| break; |
| default: |
| warn("Illegal SS type: %i\n", seg.type); |
| break; |
| } |
| break; |
| |
| case MISCREG_DS: |
| case MISCREG_ES: |
| case MISCREG_FS: |
| case MISCREG_GS: |
| if (seg.unusable) |
| break; |
| if (!(seg.type & 0x1) || |
| ((seg.type & 0x8) && !(seg.type & 0x2))) |
| warn("%s has an illegal type field: %i\n", name, seg.type); |
| break; |
| |
| case MISCREG_TR: |
| // TODO: We should check the CPU mode |
| if (seg.type != 3 && seg.type != 11) |
| warn("%s: Illegal segment type (%i)\n", name, seg.type); |
| break; |
| |
| case MISCREG_TSL: |
| if (seg.unusable) |
| break; |
| if (seg.type != 2) |
| warn("%s: Illegal segment type (%i)\n", name, seg.type); |
| break; |
| } |
| |
| switch (idx) { |
| case MISCREG_SS: |
| case MISCREG_DS: |
| case MISCREG_ES: |
| case MISCREG_FS: |
| case MISCREG_GS: |
| if (seg.unusable) |
| break; |
| M5_FALLTHROUGH; |
| case MISCREG_CS: |
| if (!seg.s) |
| warn("%s: S flag not set\n", name); |
| break; |
| |
| case MISCREG_TSL: |
| if (seg.unusable) |
| break; |
| M5_FALLTHROUGH; |
| case MISCREG_TR: |
| if (seg.s) |
| warn("%s: S flag is set\n", name); |
| break; |
| } |
| |
| switch (idx) { |
| case MISCREG_SS: |
| case MISCREG_DS: |
| case MISCREG_ES: |
| case MISCREG_FS: |
| case MISCREG_GS: |
| case MISCREG_TSL: |
| if (seg.unusable) |
| break; |
| M5_FALLTHROUGH; |
| case MISCREG_TR: |
| case MISCREG_CS: |
| if (!seg.present) |
| warn("%s: P flag not set\n", name); |
| |
| if (((seg.limit & 0xFFF) == 0 && seg.g) || |
| ((seg.limit & 0xFFF00000) != 0 && !seg.g)) { |
| warn("%s limit (0x%x) and g (%i) combination is illegal.\n", |
| name, seg.limit, seg.g); |
| } |
| break; |
| } |
| |
| // TODO: Check CS DB |
| } |
| |
| X86KvmCPU::X86KvmCPU(const X86KvmCPUParams ¶ms) |
| : BaseKvmCPU(params), |
| useXSave(params.useXSave) |
| { |
| Kvm &kvm(*vm.kvm); |
| |
| if (!kvm.capSetTSSAddress()) |
| panic("KVM: Missing capability (KVM_CAP_SET_TSS_ADDR)\n"); |
| if (!kvm.capExtendedCPUID()) |
| panic("KVM: Missing capability (KVM_CAP_EXT_CPUID)\n"); |
| if (!kvm.capUserNMI()) |
| warn("KVM: Missing capability (KVM_CAP_USER_NMI)\n"); |
| if (!kvm.capVCPUEvents()) |
| warn("KVM: Missing capability (KVM_CAP_VCPU_EVENTS)\n"); |
| |
| haveDebugRegs = kvm.capDebugRegs(); |
| haveXSave = kvm.capXSave(); |
| haveXCRs = kvm.capXCRs(); |
| |
| if (useXSave && !haveXSave) { |
| warn("KVM: XSAVE not supported by host. MXCSR synchronization might be " |
| "unreliable due to kernel bugs.\n"); |
| useXSave = false; |
| } else if (!useXSave) { |
| warn("KVM: XSave FPU/SIMD synchronization disabled by user.\n"); |
| } |
| } |
| |
| X86KvmCPU::~X86KvmCPU() |
| { |
| } |
| |
| void |
| X86KvmCPU::startup() |
| { |
| BaseKvmCPU::startup(); |
| |
| updateCPUID(); |
| |
| // TODO: Do we need to create an identity mapped TSS area? We |
| // should call kvm.vm.setTSSAddress() here in that case. It should |
| // only be needed for old versions of the virtualization |
| // extensions. We should make sure that the identity range is |
| // reserved in the e820 memory map in that case. |
| } |
| |
| void |
| X86KvmCPU::dump() const |
| { |
| dumpIntRegs(); |
| if (useXSave) |
| dumpXSave(); |
| else |
| dumpFpuRegs(); |
| dumpSpecRegs(); |
| dumpDebugRegs(); |
| dumpXCRs(); |
| dumpVCpuEvents(); |
| dumpMSRs(); |
| } |
| |
| void |
| X86KvmCPU::dumpFpuRegs() const |
| { |
| struct kvm_fpu fpu; |
| getFPUState(fpu); |
| dumpKvm(fpu); |
| } |
| |
| void |
| X86KvmCPU::dumpIntRegs() const |
| { |
| struct kvm_regs regs; |
| getRegisters(regs); |
| dumpKvm(regs); |
| } |
| |
| void |
| X86KvmCPU::dumpSpecRegs() const |
| { |
| struct kvm_sregs sregs; |
| getSpecialRegisters(sregs); |
| dumpKvm(sregs); |
| } |
| |
| void |
| X86KvmCPU::dumpDebugRegs() const |
| { |
| if (haveDebugRegs) { |
| #ifdef KVM_GET_DEBUGREGS |
| struct kvm_debugregs dregs; |
| getDebugRegisters(dregs); |
| dumpKvm(dregs); |
| #endif |
| } else { |
| inform("Debug registers not supported by kernel.\n"); |
| } |
| } |
| |
| void |
| X86KvmCPU::dumpXCRs() const |
| { |
| if (haveXCRs) { |
| struct kvm_xcrs xcrs; |
| getXCRs(xcrs); |
| dumpKvm(xcrs); |
| } else { |
| inform("XCRs not supported by kernel.\n"); |
| } |
| } |
| |
| void |
| X86KvmCPU::dumpXSave() const |
| { |
| if (haveXSave) { |
| struct kvm_xsave xsave; |
| getXSave(xsave); |
| dumpKvm(xsave); |
| } else { |
| inform("XSave not supported by kernel.\n"); |
| } |
| } |
| |
| void |
| X86KvmCPU::dumpVCpuEvents() const |
| { |
| struct kvm_vcpu_events events; |
| getVCpuEvents(events); |
| dumpKvm(events); |
| } |
| |
| void |
| X86KvmCPU::dumpMSRs() const |
| { |
| const Kvm::MSRIndexVector &supported_msrs(vm.kvm->getSupportedMSRs()); |
| std::unique_ptr<struct kvm_msrs> msrs( |
| newVarStruct<struct kvm_msrs, struct kvm_msr_entry>( |
| supported_msrs.size())); |
| |
| msrs->nmsrs = supported_msrs.size(); |
| for (int i = 0; i < supported_msrs.size(); ++i) { |
| struct kvm_msr_entry &e(msrs->entries[i]); |
| e.index = supported_msrs[i]; |
| e.reserved = 0; |
| e.data = 0; |
| } |
| getMSRs(*msrs.get()); |
| |
| dumpKvm(*msrs.get()); |
| } |
| |
| void |
| X86KvmCPU::updateKvmState() |
| { |
| updateKvmStateRegs(); |
| updateKvmStateSRegs(); |
| updateKvmStateFPU(); |
| updateKvmStateMSRs(); |
| |
| DPRINTF(KvmContext, "X86KvmCPU::updateKvmState():\n"); |
| if (DTRACE(KvmContext)) |
| dump(); |
| } |
| |
| void |
| X86KvmCPU::updateKvmStateRegs() |
| { |
| struct kvm_regs regs; |
| |
| #define APPLY_IREG(kreg, mreg) regs.kreg = tc->readIntReg(mreg) |
| FOREACH_IREG(); |
| #undef APPLY_IREG |
| |
| regs.rip = tc->instAddr() - tc->readMiscReg(MISCREG_CS_BASE); |
| |
| /* You might think that setting regs.rflags to the contents |
| * MISCREG_RFLAGS here would suffice. In that case you're |
| * mistaken. We need to reconstruct it from a bunch of ucode |
| * registers and wave a dead chicken over it (aka mask out and set |
| * reserved bits) to get it to work. |
| */ |
| regs.rflags = X86ISA::getRFlags(tc); |
| |
| setRegisters(regs); |
| } |
| |
| static inline void |
| setKvmSegmentReg(ThreadContext *tc, struct kvm_segment &kvm_seg, |
| const int index) |
| { |
| SegAttr attr(tc->readMiscRegNoEffect(MISCREG_SEG_ATTR(index))); |
| |
| kvm_seg.base = tc->readMiscRegNoEffect(MISCREG_SEG_BASE(index)); |
| kvm_seg.limit = tc->readMiscRegNoEffect(MISCREG_SEG_LIMIT(index)); |
| kvm_seg.selector = tc->readMiscRegNoEffect(MISCREG_SEG_SEL(index)); |
| kvm_seg.type = attr.type; |
| kvm_seg.present = attr.present; |
| kvm_seg.dpl = attr.dpl; |
| kvm_seg.db = attr.defaultSize; |
| kvm_seg.s = attr.system; |
| kvm_seg.l = attr.longMode; |
| kvm_seg.g = attr.granularity; |
| kvm_seg.avl = attr.avl; |
| |
| // A segment is normally unusable when the selector is zero. There |
| // is a attr.unusable flag in gem5, but it seems unused. qemu |
| // seems to set this to 0 all the time, so we just do the same and |
| // hope for the best. |
| kvm_seg.unusable = 0; |
| } |
| |
| static inline void |
| setKvmDTableReg(ThreadContext *tc, struct kvm_dtable &kvm_dtable, |
| const int index) |
| { |
| kvm_dtable.base = tc->readMiscRegNoEffect(MISCREG_SEG_BASE(index)); |
| kvm_dtable.limit = tc->readMiscRegNoEffect(MISCREG_SEG_LIMIT(index)); |
| } |
| |
| static void |
| forceSegAccessed(struct kvm_segment &seg) |
| { |
| // Intel's VMX requires that (some) usable segments are flagged as |
| // 'accessed' (i.e., the lowest bit in the segment type is set) |
| // when entering VMX. This wouldn't necessary be the case even if |
| // gem5 did set the access bits correctly, so we force it to one |
| // in that case. |
| if (!seg.unusable) |
| seg.type |= SEG_TYPE_BIT_ACCESSED; |
| } |
| |
| void |
| X86KvmCPU::updateKvmStateSRegs() |
| { |
| struct kvm_sregs sregs; |
| |
| #define APPLY_SREG(kreg, mreg) sregs.kreg = tc->readMiscRegNoEffect(mreg) |
| #define APPLY_SEGMENT(kreg, idx) setKvmSegmentReg(tc, sregs.kreg, idx) |
| #define APPLY_DTABLE(kreg, idx) setKvmDTableReg(tc, sregs.kreg, idx) |
| |
| FOREACH_SREG(); |
| FOREACH_SEGMENT(); |
| FOREACH_DTABLE(); |
| |
| #undef APPLY_SREG |
| #undef APPLY_SEGMENT |
| #undef APPLY_DTABLE |
| |
| // Clear the interrupt bitmap |
| memset(&sregs.interrupt_bitmap, 0, sizeof(sregs.interrupt_bitmap)); |
| |
| // VMX requires CS, SS, DS, ES, FS, and GS to have the accessed |
| // bit in the type field set. |
| forceSegAccessed(sregs.cs); |
| forceSegAccessed(sregs.ss); |
| forceSegAccessed(sregs.ds); |
| forceSegAccessed(sregs.es); |
| forceSegAccessed(sregs.fs); |
| forceSegAccessed(sregs.gs); |
| |
| // There are currently some cases where the active task isn't |
| // marked as busy. This is illegal in VMX, so we force it to busy. |
| if (sregs.tr.type == SEG_SYS_TYPE_TSS_AVAILABLE) { |
| hack("tr.type (%i) is not busy. Forcing the busy bit.\n", |
| sregs.tr.type); |
| sregs.tr.type = SEG_SYS_TYPE_TSS_BUSY; |
| } |
| |
| // VMX requires the DPL of SS and CS to be the same for |
| // non-conforming code segments. It seems like m5 doesn't set the |
| // DPL of SS correctly when taking interrupts, so we need to fix |
| // that here. |
| if ((sregs.cs.type == SEG_CS_TYPE_ACCESSED || |
| sregs.cs.type == SEG_CS_TYPE_READ_ACCESSED) && |
| sregs.cs.dpl != sregs.ss.dpl) { |
| |
| hack("CS.DPL (%i) != SS.DPL (%i): Forcing SS.DPL to %i\n", |
| sregs.cs.dpl, sregs.ss.dpl, sregs.cs.dpl); |
| sregs.ss.dpl = sregs.cs.dpl; |
| } |
| |
| // Do checks after fixing up the state to avoid getting excessive |
| // amounts of warnings. |
| RFLAGS rflags_nocc(tc->readMiscReg(MISCREG_RFLAGS)); |
| if (!rflags_nocc.vm) { |
| // Do segment verification if the CPU isn't entering virtual |
| // 8086 mode. We currently assume that unrestricted guest |
| // mode is available. |
| |
| #define APPLY_SEGMENT(kreg, idx) \ |
| checkSeg(# kreg, idx + MISCREG_SEG_SEL_BASE, sregs.kreg, sregs) |
| |
| FOREACH_SEGMENT(); |
| #undef APPLY_SEGMENT |
| } |
| |
| setSpecialRegisters(sregs); |
| } |
| |
| template <typename T> |
| static void |
| updateKvmStateFPUCommon(ThreadContext *tc, T &fpu) |
| { |
| fpu.mxcsr = tc->readMiscRegNoEffect(MISCREG_MXCSR); |
| fpu.fcw = tc->readMiscRegNoEffect(MISCREG_FCW); |
| // No need to rebuild from MISCREG_FSW and MISCREG_TOP if we read |
| // with effects. |
| fpu.fsw = tc->readMiscReg(MISCREG_FSW); |
| |
| uint64_t ftw(tc->readMiscRegNoEffect(MISCREG_FTW)); |
| fpu.ftwx = X86ISA::convX87TagsToXTags(ftw); |
| |
| fpu.last_opcode = tc->readMiscRegNoEffect(MISCREG_FOP); |
| |
| const unsigned top((fpu.fsw >> 11) & 0x7); |
| for (int i = 0; i < 8; ++i) { |
| const unsigned reg_idx((i + top) & 0x7); |
| const double value(bitsToFloat64( |
| tc->readFloatReg(FLOATREG_FPR(reg_idx)))); |
| DPRINTF(KvmContext, "Setting KVM FP reg %i (st[%i]) := %f\n", |
| reg_idx, i, value); |
| X86ISA::storeFloat80(fpu.fpr[i], value); |
| } |
| |
| // TODO: We should update the MMX state |
| |
| for (int i = 0; i < 16; ++i) { |
| *(uint64_t *)&fpu.xmm[i][0] = |
| tc->readFloatReg(FLOATREG_XMM_LOW(i)); |
| *(uint64_t *)&fpu.xmm[i][8] = |
| tc->readFloatReg(FLOATREG_XMM_HIGH(i)); |
| } |
| } |
| |
| void |
| X86KvmCPU::updateKvmStateFPULegacy() |
| { |
| struct kvm_fpu fpu; |
| |
| // There is some padding in the FP registers, so we'd better zero |
| // the whole struct. |
| memset(&fpu, 0, sizeof(fpu)); |
| |
| updateKvmStateFPUCommon(tc, fpu); |
| |
| if (tc->readMiscRegNoEffect(MISCREG_FISEG)) |
| warn_once("MISCREG_FISEG is non-zero.\n"); |
| |
| fpu.last_ip = tc->readMiscRegNoEffect(MISCREG_FIOFF); |
| |
| if (tc->readMiscRegNoEffect(MISCREG_FOSEG)) |
| warn_once("MISCREG_FOSEG is non-zero.\n"); |
| |
| fpu.last_dp = tc->readMiscRegNoEffect(MISCREG_FOOFF); |
| |
| setFPUState(fpu); |
| } |
| |
| void |
| X86KvmCPU::updateKvmStateFPUXSave() |
| { |
| struct kvm_xsave kxsave; |
| FXSave &xsave(*(FXSave *)kxsave.region); |
| |
| // There is some padding and reserved fields in the structure, so |
| // we'd better zero the whole thing. |
| memset(&kxsave, 0, sizeof(kxsave)); |
| |
| updateKvmStateFPUCommon(tc, xsave); |
| |
| if (tc->readMiscRegNoEffect(MISCREG_FISEG)) |
| warn_once("MISCREG_FISEG is non-zero.\n"); |
| |
| xsave.ctrl64.fpu_ip = tc->readMiscRegNoEffect(MISCREG_FIOFF); |
| |
| if (tc->readMiscRegNoEffect(MISCREG_FOSEG)) |
| warn_once("MISCREG_FOSEG is non-zero.\n"); |
| |
| xsave.ctrl64.fpu_dp = tc->readMiscRegNoEffect(MISCREG_FOOFF); |
| |
| setXSave(kxsave); |
| } |
| |
| void |
| X86KvmCPU::updateKvmStateFPU() |
| { |
| if (useXSave) |
| updateKvmStateFPUXSave(); |
| else |
| updateKvmStateFPULegacy(); |
| } |
| |
| void |
| X86KvmCPU::updateKvmStateMSRs() |
| { |
| KvmMSRVector msrs; |
| |
| const Kvm::MSRIndexVector &indices(getMsrIntersection()); |
| |
| for (auto it = indices.cbegin(); it != indices.cend(); ++it) { |
| struct kvm_msr_entry e; |
| |
| e.index = *it; |
| e.reserved = 0; |
| e.data = tc->readMiscReg(msrMap.at(*it)); |
| DPRINTF(KvmContext, "Adding MSR: idx: 0x%x, data: 0x%x\n", |
| e.index, e.data); |
| |
| msrs.push_back(e); |
| } |
| |
| setMSRs(msrs); |
| } |
| |
| void |
| X86KvmCPU::updateThreadContext() |
| { |
| struct kvm_regs regs; |
| struct kvm_sregs sregs; |
| |
| getRegisters(regs); |
| getSpecialRegisters(sregs); |
| |
| DPRINTF(KvmContext, "X86KvmCPU::updateThreadContext():\n"); |
| if (DTRACE(KvmContext)) |
| dump(); |
| |
| updateThreadContextRegs(regs, sregs); |
| updateThreadContextSRegs(sregs); |
| if (useXSave) { |
| struct kvm_xsave xsave; |
| getXSave(xsave); |
| |
| updateThreadContextXSave(xsave); |
| } else { |
| struct kvm_fpu fpu; |
| getFPUState(fpu); |
| |
| updateThreadContextFPU(fpu); |
| } |
| updateThreadContextMSRs(); |
| |
| // The M5 misc reg caches some values from other |
| // registers. Writing to it with side effects causes it to be |
| // updated from its source registers. |
| tc->setMiscReg(MISCREG_M5_REG, 0); |
| } |
| |
| void |
| X86KvmCPU::updateThreadContextRegs(const struct kvm_regs ®s, |
| const struct kvm_sregs &sregs) |
| { |
| #define APPLY_IREG(kreg, mreg) tc->setIntReg(mreg, regs.kreg) |
| |
| FOREACH_IREG(); |
| |
| #undef APPLY_IREG |
| |
| tc->pcState(PCState(regs.rip + sregs.cs.base)); |
| |
| // Flags are spread out across multiple semi-magic registers so we |
| // need some special care when updating them. |
| X86ISA::setRFlags(tc, regs.rflags); |
| } |
| |
| |
| inline void |
| setContextSegment(ThreadContext *tc, const struct kvm_segment &kvm_seg, |
| const int index) |
| { |
| SegAttr attr(0); |
| |
| attr.type = kvm_seg.type; |
| attr.present = kvm_seg.present; |
| attr.dpl = kvm_seg.dpl; |
| attr.defaultSize = kvm_seg.db; |
| attr.system = kvm_seg.s; |
| attr.longMode = kvm_seg.l; |
| attr.granularity = kvm_seg.g; |
| attr.avl = kvm_seg.avl; |
| attr.unusable = kvm_seg.unusable; |
| |
| // We need some setMiscReg magic here to keep the effective base |
| // addresses in sync. We need an up-to-date version of EFER, so |
| // make sure this is called after the sregs have been synced. |
| tc->setMiscReg(MISCREG_SEG_BASE(index), kvm_seg.base); |
| tc->setMiscReg(MISCREG_SEG_LIMIT(index), kvm_seg.limit); |
| tc->setMiscReg(MISCREG_SEG_SEL(index), kvm_seg.selector); |
| tc->setMiscReg(MISCREG_SEG_ATTR(index), attr); |
| } |
| |
| inline void |
| setContextSegment(ThreadContext *tc, const struct kvm_dtable &kvm_dtable, |
| const int index) |
| { |
| // We need some setMiscReg magic here to keep the effective base |
| // addresses in sync. We need an up-to-date version of EFER, so |
| // make sure this is called after the sregs have been synced. |
| tc->setMiscReg(MISCREG_SEG_BASE(index), kvm_dtable.base); |
| tc->setMiscReg(MISCREG_SEG_LIMIT(index), kvm_dtable.limit); |
| } |
| |
| void |
| X86KvmCPU::updateThreadContextSRegs(const struct kvm_sregs &sregs) |
| { |
| assert(getKvmRunState()->apic_base == sregs.apic_base); |
| assert(getKvmRunState()->cr8 == sregs.cr8); |
| |
| #define APPLY_SREG(kreg, mreg) tc->setMiscRegNoEffect(mreg, sregs.kreg) |
| #define APPLY_SEGMENT(kreg, idx) setContextSegment(tc, sregs.kreg, idx) |
| #define APPLY_DTABLE(kreg, idx) setContextSegment(tc, sregs.kreg, idx) |
| FOREACH_SREG(); |
| FOREACH_SEGMENT(); |
| FOREACH_DTABLE(); |
| #undef APPLY_SREG |
| #undef APPLY_SEGMENT |
| #undef APPLY_DTABLE |
| } |
| |
| template<typename T> |
| static void |
| updateThreadContextFPUCommon(ThreadContext *tc, const T &fpu) |
| { |
| const unsigned top((fpu.fsw >> 11) & 0x7); |
| |
| for (int i = 0; i < 8; ++i) { |
| const unsigned reg_idx((i + top) & 0x7); |
| const double value(X86ISA::loadFloat80(fpu.fpr[i])); |
| DPRINTF(KvmContext, "Setting gem5 FP reg %i (st[%i]) := %f\n", |
| reg_idx, i, value); |
| tc->setFloatReg(FLOATREG_FPR(reg_idx), floatToBits64(value)); |
| } |
| |
| // TODO: We should update the MMX state |
| |
| tc->setMiscRegNoEffect(MISCREG_X87_TOP, top); |
| tc->setMiscRegNoEffect(MISCREG_MXCSR, fpu.mxcsr); |
| tc->setMiscRegNoEffect(MISCREG_FCW, fpu.fcw); |
| tc->setMiscRegNoEffect(MISCREG_FSW, fpu.fsw); |
| |
| uint64_t ftw(convX87XTagsToTags(fpu.ftwx)); |
| // TODO: Are these registers really the same? |
| tc->setMiscRegNoEffect(MISCREG_FTW, ftw); |
| tc->setMiscRegNoEffect(MISCREG_FTAG, ftw); |
| |
| tc->setMiscRegNoEffect(MISCREG_FOP, fpu.last_opcode); |
| |
| for (int i = 0; i < 16; ++i) { |
| tc->setFloatReg(FLOATREG_XMM_LOW(i), *(uint64_t *)&fpu.xmm[i][0]); |
| tc->setFloatReg(FLOATREG_XMM_HIGH(i), *(uint64_t *)&fpu.xmm[i][8]); |
| } |
| } |
| |
| void |
| X86KvmCPU::updateThreadContextFPU(const struct kvm_fpu &fpu) |
| { |
| updateThreadContextFPUCommon(tc, fpu); |
| |
| tc->setMiscRegNoEffect(MISCREG_FISEG, 0); |
| tc->setMiscRegNoEffect(MISCREG_FIOFF, fpu.last_ip); |
| tc->setMiscRegNoEffect(MISCREG_FOSEG, 0); |
| tc->setMiscRegNoEffect(MISCREG_FOOFF, fpu.last_dp); |
| } |
| |
| void |
| X86KvmCPU::updateThreadContextXSave(const struct kvm_xsave &kxsave) |
| { |
| const FXSave &xsave(*(const FXSave *)kxsave.region); |
| |
| updateThreadContextFPUCommon(tc, xsave); |
| |
| tc->setMiscRegNoEffect(MISCREG_FISEG, 0); |
| tc->setMiscRegNoEffect(MISCREG_FIOFF, xsave.ctrl64.fpu_ip); |
| tc->setMiscRegNoEffect(MISCREG_FOSEG, 0); |
| tc->setMiscRegNoEffect(MISCREG_FOOFF, xsave.ctrl64.fpu_dp); |
| } |
| |
| void |
| X86KvmCPU::updateThreadContextMSRs() |
| { |
| const Kvm::MSRIndexVector &msrs(getMsrIntersection()); |
| |
| std::unique_ptr<struct kvm_msrs> kvm_msrs( |
| newVarStruct<struct kvm_msrs, struct kvm_msr_entry>(msrs.size())); |
| struct kvm_msr_entry *entry; |
| |
| // Create a list of MSRs to read |
| kvm_msrs->nmsrs = msrs.size(); |
| entry = &kvm_msrs->entries[0]; |
| for (auto it = msrs.cbegin(); it != msrs.cend(); ++it, ++entry) { |
| entry->index = *it; |
| entry->reserved = 0; |
| entry->data = 0; |
| } |
| |
| getMSRs(*kvm_msrs.get()); |
| |
| // Update M5's state |
| entry = &kvm_msrs->entries[0]; |
| for (int i = 0; i < kvm_msrs->nmsrs; ++i, ++entry) { |
| DPRINTF(KvmContext, "Setting M5 MSR: idx: 0x%x, data: 0x%x\n", |
| entry->index, entry->data); |
| |
| tc->setMiscReg(X86ISA::msrMap.at(entry->index), entry->data); |
| } |
| } |
| |
| void |
| X86KvmCPU::deliverInterrupts() |
| { |
| Fault fault; |
| |
| syncThreadContext(); |
| |
| { |
| // Migrate to the interrupt controller's thread to get the |
| // interrupt. Even though the individual methods are safe to |
| // call across threads, we might still lose interrupts unless |
| // they are getInterrupt() and updateIntrInfo() are called |
| // atomically. |
| EventQueue::ScopedMigration migrate(interrupts[0]->eventQueue()); |
| fault = interrupts[0]->getInterrupt(); |
| interrupts[0]->updateIntrInfo(); |
| } |
| |
| X86Interrupt *x86int(dynamic_cast<X86Interrupt *>(fault.get())); |
| if (dynamic_cast<NonMaskableInterrupt *>(fault.get())) { |
| DPRINTF(KvmInt, "Delivering NMI\n"); |
| kvmNonMaskableInterrupt(); |
| } else if (dynamic_cast<InitInterrupt *>(fault.get())) { |
| DPRINTF(KvmInt, "INIT interrupt\n"); |
| fault.get()->invoke(tc); |
| // Delay the kvm state update since we won't enter KVM on this |
| // tick. |
| threadContextDirty = true; |
| // HACK: gem5 doesn't actually have any BIOS code, which means |
| // that we need to halt the thread and wait for a startup |
| // interrupt before restarting the thread. The simulated CPUs |
| // use the same kind of hack using a microcode routine. |
| thread->suspend(); |
| } else if (dynamic_cast<StartupInterrupt *>(fault.get())) { |
| DPRINTF(KvmInt, "STARTUP interrupt\n"); |
| fault.get()->invoke(tc); |
| // The kvm state is assumed to have been updated when entering |
| // kvmRun(), so we need to update manually it here. |
| updateKvmState(); |
| } else if (x86int) { |
| struct kvm_interrupt kvm_int; |
| kvm_int.irq = x86int->getVector(); |
| |
| DPRINTF(KvmInt, "Delivering interrupt: %s (%u)\n", |
| fault->name(), kvm_int.irq); |
| |
| kvmInterrupt(kvm_int); |
| } else { |
| panic("KVM: Unknown interrupt type\n"); |
| } |
| |
| } |
| |
| Tick |
| X86KvmCPU::kvmRun(Tick ticks) |
| { |
| struct kvm_run &kvm_run(*getKvmRunState()); |
| |
| auto *lapic = dynamic_cast<X86ISA::Interrupts *>(interrupts[0]); |
| |
| if (lapic->checkInterruptsRaw()) { |
| if (lapic->hasPendingUnmaskable()) { |
| DPRINTF(KvmInt, |
| "Delivering unmaskable interrupt.\n"); |
| syncThreadContext(); |
| deliverInterrupts(); |
| } else if (kvm_run.ready_for_interrupt_injection) { |
| // KVM claims that it is ready for an interrupt. It might |
| // be lying if we just updated rflags and disabled |
| // interrupts (e.g., by doing a CPU handover). Let's sync |
| // the thread context and check if there are /really/ |
| // interrupts that should be delivered now. |
| syncThreadContext(); |
| if (lapic->checkInterrupts()) { |
| DPRINTF(KvmInt, |
| "M5 has pending interrupts, delivering interrupt.\n"); |
| |
| deliverInterrupts(); |
| } else { |
| DPRINTF(KvmInt, |
| "Interrupt delivery delayed due to KVM confusion.\n"); |
| kvm_run.request_interrupt_window = 1; |
| } |
| } else if (!kvm_run.request_interrupt_window) { |
| DPRINTF(KvmInt, |
| "M5 has pending interrupts, requesting interrupt " |
| "window.\n"); |
| kvm_run.request_interrupt_window = 1; |
| } |
| } else { |
| kvm_run.request_interrupt_window = 0; |
| } |
| |
| // The CPU might have been suspended as a result of the INIT |
| // interrupt delivery hack. In that case, don't enter into KVM. |
| if (_status == Idle) |
| return 0; |
| else |
| return kvmRunWrapper(ticks); |
| } |
| |
| Tick |
| X86KvmCPU::kvmRunDrain() |
| { |
| struct kvm_run &kvm_run(*getKvmRunState()); |
| |
| if (!archIsDrained()) { |
| DPRINTF(Drain, "kvmRunDrain: Architecture code isn't drained\n"); |
| |
| // Tell KVM to find a suitable place to deliver interrupts. This |
| // should ensure that pending interrupts have been delivered and |
| // things are reasonably consistent (i.e., no interrupts pending |
| // in the guest). |
| kvm_run.request_interrupt_window = 1; |
| |
| // Limit the run to 1 millisecond. That is hopefully enough to |
| // reach an interrupt window. Otherwise, we'll just try again |
| // later. |
| return kvmRunWrapper(1 * SimClock::Float::ms); |
| } else { |
| DPRINTF(Drain, "kvmRunDrain: Delivering pending IO\n"); |
| |
| return kvmRunWrapper(0); |
| } |
| } |
| |
| Tick |
| X86KvmCPU::kvmRunWrapper(Tick ticks) |
| { |
| struct kvm_run &kvm_run(*getKvmRunState()); |
| |
| // Synchronize the APIC base and CR8 here since they are present |
| // in the kvm_run struct, which makes the synchronization really |
| // cheap. |
| kvm_run.apic_base = tc->readMiscReg(MISCREG_APIC_BASE); |
| kvm_run.cr8 = tc->readMiscReg(MISCREG_CR8); |
| |
| const Tick run_ticks(BaseKvmCPU::kvmRun(ticks)); |
| |
| tc->setMiscReg(MISCREG_APIC_BASE, kvm_run.apic_base); |
| kvm_run.cr8 = tc->readMiscReg(MISCREG_CR8); |
| |
| return run_ticks; |
| } |
| |
| uint64_t |
| X86KvmCPU::getHostCycles() const |
| { |
| return getMSR(MSR_TSC); |
| } |
| |
| void |
| X86KvmCPU::handleIOMiscReg32(int miscreg) |
| { |
| struct kvm_run &kvm_run(*getKvmRunState()); |
| const uint16_t port(kvm_run.io.port); |
| |
| assert(kvm_run.exit_reason == KVM_EXIT_IO); |
| |
| if (kvm_run.io.size != 4) { |
| panic("Unexpected IO size (%u) for address 0x%x.\n", |
| kvm_run.io.size, port); |
| } |
| |
| if (kvm_run.io.count != 1) { |
| panic("Unexpected IO count (%u) for address 0x%x.\n", |
| kvm_run.io.count, port); |
| } |
| |
| uint32_t *data((uint32_t *)getGuestData(kvm_run.io.data_offset)); |
| if (kvm_run.io.direction == KVM_EXIT_IO_OUT) |
| tc->setMiscReg(miscreg, *data); |
| else |
| *data = tc->readMiscRegNoEffect(miscreg); |
| } |
| |
| Tick |
| X86KvmCPU::handleKvmExitIO() |
| { |
| struct kvm_run &kvm_run(*getKvmRunState()); |
| bool isWrite(kvm_run.io.direction == KVM_EXIT_IO_OUT); |
| unsigned char *guestData(getGuestData(kvm_run.io.data_offset)); |
| Tick delay(0); |
| uint16_t port(kvm_run.io.port); |
| Addr pAddr; |
| const int count(kvm_run.io.count); |
| |
| assert(kvm_run.io.direction == KVM_EXIT_IO_IN || |
| kvm_run.io.direction == KVM_EXIT_IO_OUT); |
| |
| DPRINTF(KvmIO, "KVM-x86: Handling IO instruction (%s) (port: 0x%x)\n", |
| (isWrite ? "out" : "in"), kvm_run.io.port); |
| |
| /* Vanilla gem5 handles PCI discovery in the TLB(!). Since we |
| * don't use the TLB component, we need to intercept and handle |
| * the PCI configuration space IO ports here. |
| * |
| * The IO port PCI discovery mechanism uses one address register |
| * and one data register. We map the address register to a misc |
| * reg and use that to re-route data register accesses to the |
| * right location in the PCI configuration space. |
| */ |
| if (port == IO_PCI_CONF_ADDR) { |
| handleIOMiscReg32(MISCREG_PCI_CONFIG_ADDRESS); |
| return 0; |
| } else if ((port & ~0x3) == IO_PCI_CONF_DATA_BASE) { |
| Addr pciConfigAddr(tc->readMiscRegNoEffect(MISCREG_PCI_CONFIG_ADDRESS)); |
| if (pciConfigAddr & 0x80000000) { |
| pAddr = X86ISA::x86PciConfigAddress((pciConfigAddr & 0x7ffffffc) | |
| (port & 0x3)); |
| } else { |
| pAddr = X86ISA::x86IOAddress(port); |
| } |
| } else { |
| pAddr = X86ISA::x86IOAddress(port); |
| } |
| |
| const MemCmd cmd(isWrite ? MemCmd::WriteReq : MemCmd::ReadReq); |
| // Temporarily lock and migrate to the device event queue to |
| // prevent races in multi-core mode. |
| EventQueue::ScopedMigration migrate(deviceEventQueue()); |
| for (int i = 0; i < count; ++i) { |
| RequestPtr io_req = std::make_shared<Request>( |
| pAddr, kvm_run.io.size, |
| Request::UNCACHEABLE, dataRequestorId()); |
| |
| io_req->setContext(tc->contextId()); |
| |
| PacketPtr pkt = new Packet(io_req, cmd); |
| |
| pkt->dataStatic(guestData); |
| delay += dataPort.submitIO(pkt); |
| |
| guestData += kvm_run.io.size; |
| } |
| |
| return delay; |
| } |
| |
| Tick |
| X86KvmCPU::handleKvmExitIRQWindowOpen() |
| { |
| // We don't need to do anything here since this is caught the next |
| // time we execute kvmRun(). We still overload the exit event to |
| // silence the warning about an unhandled exit event. |
| return 0; |
| } |
| |
| bool |
| X86KvmCPU::archIsDrained() const |
| { |
| struct kvm_vcpu_events events; |
| |
| getVCpuEvents(events); |
| |
| // We could probably handle this in a by re-inserting interrupts |
| // that are pending into gem5 on a drain. However, that would |
| // probably be tricky to do reliably, so we'll just prevent a |
| // drain if there is anything pending in the |
| // guest. X86KvmCPU::kvmRunDrain() minimizes the amount of code |
| // executed in the guest by requesting an interrupt window if |
| // there are pending interrupts. |
| const bool pending_events(events.exception.injected || |
| events.interrupt.injected || |
| events.nmi.injected || events.nmi.pending); |
| |
| if (pending_events) { |
| DPRINTF(Drain, "archIsDrained: Pending events: %s %s %s %s\n", |
| events.exception.injected ? "exception" : "", |
| events.interrupt.injected ? "interrupt" : "", |
| events.nmi.injected ? "nmi[i]" : "", |
| events.nmi.pending ? "nmi[p]" : ""); |
| } |
| |
| return !pending_events; |
| } |
| |
| static struct kvm_cpuid_entry2 |
| makeKvmCpuid(uint32_t function, uint32_t index, |
| CpuidResult &result) |
| { |
| struct kvm_cpuid_entry2 e; |
| e.function = function; |
| e.index = index; |
| e.flags = 0; |
| e.eax = (uint32_t)result.rax; |
| e.ebx = (uint32_t)result.rbx; |
| e.ecx = (uint32_t)result.rcx; |
| e.edx = (uint32_t)result.rdx; |
| |
| return e; |
| } |
| |
| void |
| X86KvmCPU::updateCPUID() |
| { |
| Kvm::CPUIDVector m5_supported; |
| |
| /* TODO: We currently don't support any of the functions that |
| * iterate through data structures in the CPU using an index. It's |
| * currently not a problem since M5 doesn't expose any of them at |
| * the moment. |
| */ |
| |
| /* Basic features */ |
| CpuidResult func0; |
| X86ISA::doCpuid(tc, 0x0, 0, func0); |
| for (uint32_t function = 0; function <= func0.rax; ++function) { |
| CpuidResult cpuid; |
| uint32_t idx(0); |
| |
| X86ISA::doCpuid(tc, function, idx, cpuid); |
| m5_supported.push_back(makeKvmCpuid(function, idx, cpuid)); |
| } |
| |
| /* Extended features */ |
| CpuidResult efunc0; |
| X86ISA::doCpuid(tc, 0x80000000, 0, efunc0); |
| for (uint32_t function = 0x80000000; function <= efunc0.rax; ++function) { |
| CpuidResult cpuid; |
| uint32_t idx(0); |
| |
| X86ISA::doCpuid(tc, function, idx, cpuid); |
| m5_supported.push_back(makeKvmCpuid(function, idx, cpuid)); |
| } |
| |
| setCPUID(m5_supported); |
| } |
| |
| void |
| X86KvmCPU::setCPUID(const struct kvm_cpuid2 &cpuid) |
| { |
| if (ioctl(KVM_SET_CPUID2, (void *)&cpuid) == -1) |
| panic("KVM: Failed to set guest CPUID2 (errno: %i)\n", |
| errno); |
| } |
| |
| void |
| X86KvmCPU::setCPUID(const Kvm::CPUIDVector &cpuid) |
| { |
| std::unique_ptr<struct kvm_cpuid2> kvm_cpuid( |
| newVarStruct<struct kvm_cpuid2, struct kvm_cpuid_entry2>(cpuid.size())); |
| |
| kvm_cpuid->nent = cpuid.size(); |
| std::copy(cpuid.begin(), cpuid.end(), kvm_cpuid->entries); |
| |
| setCPUID(*kvm_cpuid); |
| } |
| |
| void |
| X86KvmCPU::setMSRs(const struct kvm_msrs &msrs) |
| { |
| if (ioctl(KVM_SET_MSRS, (void *)&msrs) == -1) |
| panic("KVM: Failed to set guest MSRs (errno: %i)\n", |
| errno); |
| } |
| |
| void |
| X86KvmCPU::setMSRs(const KvmMSRVector &msrs) |
| { |
| std::unique_ptr<struct kvm_msrs> kvm_msrs( |
| newVarStruct<struct kvm_msrs, struct kvm_msr_entry>(msrs.size())); |
| |
| kvm_msrs->nmsrs = msrs.size(); |
| std::copy(msrs.begin(), msrs.end(), kvm_msrs->entries); |
| |
| setMSRs(*kvm_msrs); |
| } |
| |
| void |
| X86KvmCPU::getMSRs(struct kvm_msrs &msrs) const |
| { |
| if (ioctl(KVM_GET_MSRS, (void *)&msrs) == -1) |
| panic("KVM: Failed to get guest MSRs (errno: %i)\n", |
| errno); |
| } |
| |
| |
| void |
| X86KvmCPU::setMSR(uint32_t index, uint64_t value) |
| { |
| std::unique_ptr<struct kvm_msrs> kvm_msrs( |
| newVarStruct<struct kvm_msrs, struct kvm_msr_entry>(1)); |
| struct kvm_msr_entry &entry(kvm_msrs->entries[0]); |
| |
| kvm_msrs->nmsrs = 1; |
| entry.index = index; |
| entry.reserved = 0; |
| entry.data = value; |
| |
| setMSRs(*kvm_msrs.get()); |
| } |
| |
| uint64_t |
| X86KvmCPU::getMSR(uint32_t index) const |
| { |
| std::unique_ptr<struct kvm_msrs> kvm_msrs( |
| newVarStruct<struct kvm_msrs, struct kvm_msr_entry>(1)); |
| struct kvm_msr_entry &entry(kvm_msrs->entries[0]); |
| |
| kvm_msrs->nmsrs = 1; |
| entry.index = index; |
| entry.reserved = 0; |
| entry.data = 0; |
| |
| getMSRs(*kvm_msrs.get()); |
| return entry.data; |
| } |
| |
| const Kvm::MSRIndexVector & |
| X86KvmCPU::getMsrIntersection() const |
| { |
| if (cachedMsrIntersection.empty()) { |
| const Kvm::MSRIndexVector &kvm_msrs(vm.kvm->getSupportedMSRs()); |
| |
| DPRINTF(Kvm, "kvm-x86: Updating MSR intersection\n"); |
| for (auto it = kvm_msrs.cbegin(); it != kvm_msrs.cend(); ++it) { |
| if (X86ISA::msrMap.find(*it) != X86ISA::msrMap.end()) { |
| cachedMsrIntersection.push_back(*it); |
| DPRINTF(Kvm, "kvm-x86: Adding MSR 0x%x\n", *it); |
| } else { |
| warn("kvm-x86: MSR (0x%x) unsupported by gem5. Skipping.\n", |
| *it); |
| } |
| } |
| } |
| |
| return cachedMsrIntersection; |
| } |
| |
| void |
| X86KvmCPU::getDebugRegisters(struct kvm_debugregs ®s) const |
| { |
| #ifdef KVM_GET_DEBUGREGS |
| if (ioctl(KVM_GET_DEBUGREGS, ®s) == -1) |
| panic("KVM: Failed to get guest debug registers\n"); |
| #else |
| panic("KVM: Unsupported getDebugRegisters call.\n"); |
| #endif |
| } |
| |
| void |
| X86KvmCPU::setDebugRegisters(const struct kvm_debugregs ®s) |
| { |
| #ifdef KVM_SET_DEBUGREGS |
| if (ioctl(KVM_SET_DEBUGREGS, (void *)®s) == -1) |
| panic("KVM: Failed to set guest debug registers\n"); |
| #else |
| panic("KVM: Unsupported setDebugRegisters call.\n"); |
| #endif |
| } |
| |
| void |
| X86KvmCPU::getXCRs(struct kvm_xcrs ®s) const |
| { |
| if (ioctl(KVM_GET_XCRS, ®s) == -1) |
| panic("KVM: Failed to get guest debug registers\n"); |
| } |
| |
| void |
| X86KvmCPU::setXCRs(const struct kvm_xcrs ®s) |
| { |
| if (ioctl(KVM_SET_XCRS, (void *)®s) == -1) |
| panic("KVM: Failed to set guest debug registers\n"); |
| } |
| |
| void |
| X86KvmCPU::getXSave(struct kvm_xsave &xsave) const |
| { |
| if (ioctl(KVM_GET_XSAVE, &xsave) == -1) |
| panic("KVM: Failed to get guest debug registers\n"); |
| } |
| |
| void |
| X86KvmCPU::setXSave(const struct kvm_xsave &xsave) |
| { |
| if (ioctl(KVM_SET_XSAVE, (void *)&xsave) == -1) |
| panic("KVM: Failed to set guest debug registers\n"); |
| } |
| |
| |
| void |
| X86KvmCPU::getVCpuEvents(struct kvm_vcpu_events &events) const |
| { |
| if (ioctl(KVM_GET_VCPU_EVENTS, &events) == -1) |
| panic("KVM: Failed to get guest debug registers\n"); |
| } |
| |
| void |
| X86KvmCPU::setVCpuEvents(const struct kvm_vcpu_events &events) |
| { |
| if (ioctl(KVM_SET_VCPU_EVENTS, (void *)&events) == -1) |
| panic("KVM: Failed to set guest debug registers\n"); |
| } |