| /* |
| * Copyright (c) 2012 ARM Limited |
| * All rights reserved |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Authors: Andreas Sandberg |
| */ |
| |
| #ifndef __CPU_KVM_BASE_HH__ |
| #define __CPU_KVM_BASE_HH__ |
| |
| #include <pthread.h> |
| |
| #include <csignal> |
| #include <memory> |
| #include <queue> |
| |
| #include "base/statistics.hh" |
| #include "cpu/kvm/perfevent.hh" |
| #include "cpu/kvm/timer.hh" |
| #include "cpu/kvm/vm.hh" |
| #include "cpu/base.hh" |
| #include "cpu/simple_thread.hh" |
| #include "sim/faults.hh" |
| |
| /** Signal to use to trigger exits from KVM */ |
| #define KVM_KICK_SIGNAL SIGRTMIN |
| |
| // forward declarations |
| class ThreadContext; |
| struct BaseKvmCPUParams; |
| |
| /** |
| * Base class for KVM based CPU models |
| * |
| * All architecture specific KVM implementation should inherit from |
| * this class. The most basic CPU models only need to override the |
| * updateKvmState() and updateThreadContext() methods to implement |
| * state synchronization between gem5 and KVM. |
| * |
| * The architecture specific implementation is also responsible for |
| * delivering interrupts into the VM. This is typically done by |
| * overriding tick() and checking the thread context before entering |
| * into the VM. In order to deliver an interrupt, the implementation |
| * then calls KvmVM::setIRQLine() or BaseKvmCPU::kvmInterrupt() |
| * depending on the specifics of the underlying hardware/drivers. |
| */ |
| class BaseKvmCPU : public BaseCPU |
| { |
| public: |
| BaseKvmCPU(BaseKvmCPUParams *params); |
| virtual ~BaseKvmCPU(); |
| |
| void init() override; |
| void startup() override; |
| void regStats() override; |
| |
| void serializeThread(CheckpointOut &cp, ThreadID tid) const override; |
| void unserializeThread(CheckpointIn &cp, ThreadID tid) override; |
| |
| DrainState drain() override; |
| void drainResume() override; |
| void notifyFork() override; |
| |
| void switchOut() override; |
| void takeOverFrom(BaseCPU *cpu) override; |
| |
| void verifyMemoryMode() const override; |
| |
| Port &getDataPort() override { return dataPort; } |
| Port &getInstPort() override { return instPort; } |
| |
| void wakeup(ThreadID tid = 0) override; |
| void activateContext(ThreadID thread_num) override; |
| void suspendContext(ThreadID thread_num) override; |
| void deallocateContext(ThreadID thread_num); |
| void haltContext(ThreadID thread_num) override; |
| |
| long getVCpuID() const { return vcpuID; } |
| ThreadContext *getContext(int tn) override; |
| |
| Counter totalInsts() const override; |
| Counter totalOps() const override; |
| |
| /** |
| * Callback from KvmCPUPort to transition the CPU out of RunningMMIOPending |
| * when all timing requests have completed. |
| */ |
| void finishMMIOPending(); |
| |
| /** Dump the internal state to the terminal. */ |
| virtual void dump() const; |
| |
| /** |
| * Force an exit from KVM. |
| * |
| * Send a signal to the thread owning this vCPU to get it to exit |
| * from KVM. Ignored if the vCPU is not executing. |
| */ |
| void kick() const { pthread_kill(vcpuThread, KVM_KICK_SIGNAL); } |
| |
| /** |
| * A cached copy of a thread's state in the form of a SimpleThread |
| * object. |
| * |
| * Normally the actual thread state is stored in the KVM vCPU. If KVM has |
| * been running this copy is will be out of date. If we recently handled |
| * some events within gem5 that required state to be updated this could be |
| * the most up-to-date copy. When getContext() or updateThreadContext() is |
| * called this copy gets updated. The method syncThreadContext can |
| * be used within a KVM CPU to update the thread context if the |
| * KVM state is dirty (i.e., the vCPU has been run since the last |
| * update). |
| */ |
| SimpleThread *thread; |
| |
| /** ThreadContext object, provides an interface for external |
| * objects to modify this thread's state. |
| */ |
| ThreadContext *tc; |
| |
| KvmVM &vm; |
| |
| protected: |
| /** |
| * |
| * @dot |
| * digraph { |
| * Idle; |
| * Running; |
| * RunningService; |
| * RunningServiceCompletion; |
| * RunningMMIOPending; |
| * |
| * Idle -> Idle; |
| * Idle -> Running [label="activateContext()", URL="\ref activateContext"]; |
| * Running -> Running [label="tick()", URL="\ref tick"]; |
| * Running -> RunningService [label="tick()", URL="\ref tick"]; |
| * Running -> Idle [label="suspendContext()", URL="\ref suspendContext"]; |
| * Running -> Idle [label="drain()", URL="\ref drain"]; |
| * Idle -> Running [label="drainResume()", URL="\ref drainResume"]; |
| * RunningService -> RunningServiceCompletion [label="handleKvmExit()", URL="\ref handleKvmExit"]; |
| * RunningService -> RunningMMIOPending [label="handleKvmExit()", URL="\ref handleKvmExit"]; |
| * RunningMMIOPending -> RunningServiceCompletion [label="finishMMIOPending()", URL="\ref finishMMIOPending"]; |
| * RunningServiceCompletion -> Running [label="tick()", URL="\ref tick"]; |
| * RunningServiceCompletion -> RunningService [label="tick()", URL="\ref tick"]; |
| * } |
| * @enddot |
| */ |
| enum Status { |
| /** Context not scheduled in KVM. |
| * |
| * The CPU generally enters this state when the guest execute |
| * an instruction that halts the CPU (e.g., WFI on ARM or HLT |
| * on X86) if KVM traps this instruction. Ticks are not |
| * scheduled in this state. |
| * |
| * @see suspendContext() |
| */ |
| Idle, |
| /** Running normally. |
| * |
| * This is the normal run state of the CPU. KVM will be |
| * entered next time tick() is called. |
| */ |
| Running, |
| /** Requiring service at the beginning of the next cycle. |
| * |
| * The virtual machine has exited and requires service, tick() |
| * will call handleKvmExit() on the next cycle. The next state |
| * after running service is determined in handleKvmExit() and |
| * depends on what kind of service the guest requested: |
| * <ul> |
| * <li>IO/MMIO (Atomic): RunningServiceCompletion |
| * <li>IO/MMIO (Timing): RunningMMIOPending |
| * <li>Halt: Idle |
| * <li>Others: Running |
| * </ul> |
| */ |
| RunningService, |
| /** Timing MMIO request in flight or stalled. |
| * |
| * The VM has requested IO/MMIO and we are in timing mode. A timing |
| * request is either stalled (and will be retried with recvReqRetry()) |
| * or it is in flight. After the timing request is complete, the CPU |
| * will transition to the RunningServiceCompletion state. |
| */ |
| RunningMMIOPending, |
| /** Service completion in progress. |
| * |
| * The VM has requested service that requires KVM to be |
| * entered once in order to get to a consistent state. This |
| * happens in handleKvmExit() or one of its friends after IO |
| * exits. After executing tick(), the CPU will transition into |
| * the Running or RunningService state. |
| */ |
| RunningServiceCompletion, |
| }; |
| |
| /** CPU run state */ |
| Status _status; |
| |
| /** |
| * Execute the CPU until the next event in the main event queue or |
| * until the guest needs service from gem5. |
| */ |
| void tick(); |
| |
| /** |
| * Get the value of the hardware cycle counter in the guest. |
| * |
| * This method is supposed to return the total number of cycles |
| * executed in hardware mode relative to some arbitrary point in |
| * the past. It's mainly used when estimating the number of cycles |
| * actually executed by the CPU in kvmRun(). The default behavior |
| * of this method is to use the cycles performance counter, but |
| * some architectures may want to use internal registers instead. |
| * |
| * @return Number of host cycles executed relative to an undefined |
| * point in the past. |
| */ |
| virtual uint64_t getHostCycles() const; |
| |
| /** |
| * Request KVM to run the guest for a given number of ticks. The |
| * method returns the approximate number of ticks executed. |
| * |
| * @note The returned number of ticks can be both larger or |
| * smaller than the requested number of ticks. A smaller number |
| * can, for example, occur when the guest executes MMIO. A larger |
| * number is typically due to performance counter inaccuracies. |
| * |
| * @note This method is virtual in order to allow implementations |
| * to check for architecture specific events (e.g., interrupts) |
| * before entering the VM. |
| * |
| * @note It is the response of the caller (normally tick()) to |
| * make sure that the KVM state is synchronized and that the TC is |
| * invalidated after entering KVM. |
| * |
| * @note This method does not normally cause any state |
| * transitions. However, if it may suspend the CPU by suspending |
| * the thread, which leads to a transition to the Idle state. In |
| * such a case, kvm <i>must not</i> be entered. |
| * |
| * @param ticks Number of ticks to execute, set to 0 to exit |
| * immediately after finishing pending operations. |
| * @return Number of ticks executed (see note) |
| */ |
| virtual Tick kvmRun(Tick ticks); |
| |
| /** |
| * Request the CPU to run until draining completes. |
| * |
| * This function normally calls kvmRun(0) to make KVM finish |
| * pending MMIO operations. Architecures implementing |
| * archIsDrained() must override this method. |
| * |
| * @see BaseKvmCPU::archIsDrained() |
| * |
| * @return Number of ticks executed |
| */ |
| virtual Tick kvmRunDrain(); |
| |
| /** |
| * Get a pointer to the kvm_run structure containing all the input |
| * and output parameters from kvmRun(). |
| */ |
| struct kvm_run *getKvmRunState() { return _kvmRun; }; |
| |
| /** |
| * Retrieve a pointer to guest data stored at the end of the |
| * kvm_run structure. This is mainly used for PIO operations |
| * (KVM_EXIT_IO). |
| * |
| * @param offset Offset as specified by the kvm_run structure |
| * @return Pointer to guest data |
| */ |
| uint8_t *getGuestData(uint64_t offset) const { |
| return (uint8_t *)_kvmRun + offset; |
| }; |
| |
| /** |
| * @addtogroup KvmInterrupts |
| * @{ |
| */ |
| /** |
| * Send a non-maskable interrupt to the guest |
| * |
| * @note The presence of this call depends on Kvm::capUserNMI(). |
| */ |
| void kvmNonMaskableInterrupt(); |
| |
| /** |
| * Send a normal interrupt to the guest |
| * |
| * @note Make sure that ready_for_interrupt_injection in kvm_run |
| * is set prior to calling this function. If not, an interrupt |
| * window must be requested by setting request_interrupt_window in |
| * kvm_run to 1 and restarting the guest. |
| * |
| * @param interrupt Structure describing the interrupt to send |
| */ |
| void kvmInterrupt(const struct kvm_interrupt &interrupt); |
| |
| /** @} */ |
| |
| /** @{ */ |
| /** |
| * Get/Set the register state of the guest vCPU |
| * |
| * KVM has two different interfaces for accessing the state of the |
| * guest CPU. One interface updates 'normal' registers and one |
| * updates 'special' registers. The distinction between special |
| * and normal registers isn't very clear and is architecture |
| * dependent. |
| */ |
| void getRegisters(struct kvm_regs ®s) const; |
| void setRegisters(const struct kvm_regs ®s); |
| void getSpecialRegisters(struct kvm_sregs ®s) const; |
| void setSpecialRegisters(const struct kvm_sregs ®s); |
| /** @} */ |
| |
| /** @{ */ |
| /** |
| * Get/Set the guest FPU/vector state |
| */ |
| void getFPUState(struct kvm_fpu &state) const; |
| void setFPUState(const struct kvm_fpu &state); |
| /** @} */ |
| |
| /** @{ */ |
| /** |
| * Get/Set single register using the KVM_(SET|GET)_ONE_REG API. |
| * |
| * @note The presence of this call depends on Kvm::capOneReg(). |
| */ |
| void setOneReg(uint64_t id, const void *addr); |
| void setOneReg(uint64_t id, uint64_t value) { setOneReg(id, &value); } |
| void setOneReg(uint64_t id, uint32_t value) { setOneReg(id, &value); } |
| void getOneReg(uint64_t id, void *addr) const; |
| uint64_t getOneRegU64(uint64_t id) const { |
| uint64_t value; |
| getOneReg(id, &value); |
| return value; |
| } |
| uint32_t getOneRegU32(uint64_t id) const { |
| uint32_t value; |
| getOneReg(id, &value); |
| return value; |
| } |
| /** @} */ |
| |
| /** |
| * Get and format one register for printout. |
| * |
| * This function call getOneReg() to retrieve the contents of one |
| * register and automatically formats it for printing. |
| * |
| * @note The presence of this call depends on Kvm::capOneReg(). |
| */ |
| std::string getAndFormatOneReg(uint64_t id) const; |
| |
| /** @{ */ |
| /** |
| * Update the KVM state from the current thread context |
| * |
| * The base CPU calls this method before starting the guest CPU |
| * when the contextDirty flag is set. The architecture dependent |
| * CPU implementation is expected to update all guest state |
| * (registers, special registers, and FPU state). |
| */ |
| virtual void updateKvmState() = 0; |
| |
| /** |
| * Update the current thread context with the KVM state |
| * |
| * The base CPU after the guest updates any of the KVM state. In |
| * practice, this happens after kvmRun is called. The architecture |
| * dependent code is expected to read the state of the guest CPU |
| * and update gem5's thread state. |
| */ |
| virtual void updateThreadContext() = 0; |
| |
| /** |
| * Update a thread context if the KVM state is dirty with respect |
| * to the cached thread context. |
| */ |
| void syncThreadContext(); |
| |
| /** |
| * Get a pointer to the event queue owning devices. |
| * |
| * Devices always live in a separate device event queue when |
| * running in multi-core mode. We need to temporarily migrate to |
| * this queue when accessing devices. By convention, devices and |
| * the VM use the same event queue. |
| */ |
| EventQueue *deviceEventQueue() { return vm.eventQueue(); } |
| |
| /** |
| * Update the KVM if the thread context is dirty. |
| */ |
| void syncKvmState(); |
| /** @} */ |
| |
| /** @{ */ |
| /** |
| * Main kvmRun exit handler, calls the relevant handleKvmExit* |
| * depending on exit type. |
| * |
| * @return Number of ticks spent servicing the exit request |
| */ |
| virtual Tick handleKvmExit(); |
| |
| /** |
| * The guest performed a legacy IO request (out/inp on x86) |
| * |
| * @return Number of ticks spent servicing the IO request |
| */ |
| virtual Tick handleKvmExitIO(); |
| |
| /** |
| * The guest requested a monitor service using a hypercall |
| * |
| * @return Number of ticks spent servicing the hypercall |
| */ |
| virtual Tick handleKvmExitHypercall(); |
| |
| /** |
| * The guest exited because an interrupt window was requested |
| * |
| * The guest exited because an interrupt window was requested |
| * (request_interrupt_window in the kvm_run structure was set to 1 |
| * before calling kvmRun) and it is now ready to receive |
| * |
| * @return Number of ticks spent servicing the IRQ |
| */ |
| virtual Tick handleKvmExitIRQWindowOpen(); |
| |
| /** |
| * An unknown architecture dependent error occurred when starting |
| * the vCPU |
| * |
| * The kvm_run data structure contains the hardware error |
| * code. The defaults behavior of this method just prints the HW |
| * error code and panics. Architecture dependent implementations |
| * may want to override this method to provide better, |
| * hardware-aware, error messages. |
| * |
| * @return Number of ticks delay the next CPU tick |
| */ |
| virtual Tick handleKvmExitUnknown(); |
| |
| /** |
| * An unhandled virtualization exception occured |
| * |
| * Some KVM virtualization drivers return unhandled exceptions to |
| * the user-space monitor. This interface is currently only used |
| * by the Intel VMX KVM driver. |
| * |
| * @return Number of ticks delay the next CPU tick |
| */ |
| virtual Tick handleKvmExitException(); |
| |
| /** |
| * KVM failed to start the virtualized CPU |
| * |
| * The kvm_run data structure contains the hardware-specific error |
| * code. |
| * |
| * @return Number of ticks delay the next CPU tick |
| */ |
| virtual Tick handleKvmExitFailEntry(); |
| /** @} */ |
| |
| /** |
| * Is the architecture specific code in a state that prevents |
| * draining? |
| * |
| * This method should return false if there are any pending events |
| * in the guest vCPU that won't be carried over to the gem5 state |
| * and thus will prevent correct checkpointing or CPU handover. It |
| * might, for example, check for pending interrupts that have been |
| * passed to the vCPU but not acknowledged by the OS. Architecures |
| * implementing this method <i>must</i> override |
| * kvmRunDrain(). |
| * |
| * @see BaseKvmCPU::kvmRunDrain() |
| * |
| * @return true if the vCPU is drained, false otherwise. |
| */ |
| virtual bool archIsDrained() const { return true; } |
| |
| /** |
| * Inject a memory mapped IO request into gem5 |
| * |
| * @param paddr Physical address |
| * @param data Pointer to the source/destination buffer |
| * @param size Memory access size |
| * @param write True if write, False if read |
| * @return Number of ticks spent servicing the memory access |
| */ |
| Tick doMMIOAccess(Addr paddr, void *data, int size, bool write); |
| |
| /** @{ */ |
| /** |
| * Set the signal mask used in kvmRun() |
| * |
| * This method allows the signal mask of the thread executing |
| * kvmRun() to be overridden inside the actual system call. This |
| * allows us to mask timer signals used to force KVM exits while |
| * in gem5. |
| * |
| * The signal mask can be disabled by setting it to NULL. |
| * |
| * @param mask Signals to mask |
| */ |
| void setSignalMask(const sigset_t *mask); |
| /** @} */ |
| |
| /** |
| * @addtogroup KvmIoctl |
| * @{ |
| */ |
| /** |
| * vCPU ioctl interface. |
| * |
| * @param request KVM vCPU request |
| * @param p1 Optional request parameter |
| * |
| * @return -1 on error (error number in errno), ioctl dependent |
| * value otherwise. |
| */ |
| int ioctl(int request, long p1) const; |
| int ioctl(int request, void *p1) const { |
| return ioctl(request, (long)p1); |
| } |
| int ioctl(int request) const { |
| return ioctl(request, 0L); |
| } |
| /** @} */ |
| |
| |
| /** |
| * KVM memory port. Uses default MasterPort behavior and provides an |
| * interface for KVM to transparently submit atomic or timing requests. |
| */ |
| class KVMCpuPort : public MasterPort |
| { |
| |
| public: |
| KVMCpuPort(const std::string &_name, BaseKvmCPU *_cpu) |
| : MasterPort(_name, _cpu), cpu(_cpu), activeMMIOReqs(0) |
| { } |
| /** |
| * Interface to send Atomic or Timing IO request. Assumes that the pkt |
| * and corresponding req have been dynamically allocated and deletes |
| * them both if the system is in atomic mode. |
| */ |
| Tick submitIO(PacketPtr pkt); |
| |
| /** Returns next valid state after one or more IO accesses */ |
| Status nextIOState() const; |
| |
| protected: |
| /** KVM cpu pointer for finishMMIOPending() callback */ |
| BaseKvmCPU *cpu; |
| |
| /** Pending MMIO packets */ |
| std::queue<PacketPtr> pendingMMIOPkts; |
| |
| /** Number of MMIO requests in flight */ |
| unsigned int activeMMIOReqs; |
| |
| bool recvTimingResp(PacketPtr pkt) override; |
| |
| void recvReqRetry() override; |
| |
| }; |
| |
| /** Port for data requests */ |
| KVMCpuPort dataPort; |
| |
| /** Unused dummy port for the instruction interface */ |
| KVMCpuPort instPort; |
| |
| /** |
| * Be conservative and always synchronize the thread context on |
| * KVM entry/exit. |
| */ |
| const bool alwaysSyncTC; |
| |
| /** |
| * Is the gem5 context dirty? Set to true to force an update of |
| * the KVM vCPU state upon the next call to kvmRun(). |
| */ |
| bool threadContextDirty; |
| |
| /** |
| * Is the KVM state dirty? Set to true to force an update of |
| * the KVM vCPU state upon the next call to kvmRun(). |
| */ |
| bool kvmStateDirty; |
| |
| /** KVM internal ID of the vCPU */ |
| const long vcpuID; |
| |
| /** ID of the vCPU thread */ |
| pthread_t vcpuThread; |
| |
| private: |
| /** |
| * Service MMIO requests in the mmioRing. |
| * |
| * |
| * @return Number of ticks spent servicing the MMIO requests in |
| * the MMIO ring buffer |
| */ |
| Tick flushCoalescedMMIO(); |
| |
| /** |
| * Setup a signal handler to catch the timer signal used to |
| * switch back to the monitor. |
| */ |
| void setupSignalHandler(); |
| |
| /** |
| * Discard a (potentially) pending signal. |
| * |
| * @param signum Signal to discard |
| * @return true if the signal was pending, false otherwise. |
| */ |
| bool discardPendingSignal(int signum) const; |
| |
| /** |
| * Thread-specific initialization. |
| * |
| * Some KVM-related initialization requires us to know the TID of |
| * the thread that is going to execute our event queue. For |
| * example, when setting up timers, we need to know the TID of the |
| * thread executing in KVM in order to deliver the timer signal to |
| * that thread. This method is called as the first event in this |
| * SimObject's event queue. |
| * |
| * @see startup |
| */ |
| void startupThread(); |
| |
| /** Try to drain the CPU if a drain is pending */ |
| bool tryDrain(); |
| |
| /** Execute the KVM_RUN ioctl */ |
| void ioctlRun(); |
| |
| /** KVM vCPU file descriptor */ |
| int vcpuFD; |
| /** Size of MMAPed kvm_run area */ |
| int vcpuMMapSize; |
| /** |
| * Pointer to the kvm_run structure used to communicate parameters |
| * with KVM. |
| * |
| * @note This is the base pointer of the MMAPed KVM region. The |
| * first page contains the kvm_run structure. Subsequent pages may |
| * contain other data such as the MMIO ring buffer. |
| */ |
| struct kvm_run *_kvmRun; |
| /** |
| * Coalesced MMIO ring buffer. NULL if coalesced MMIO is not |
| * supported. |
| */ |
| struct kvm_coalesced_mmio_ring *mmioRing; |
| /** Cached page size of the host */ |
| const long pageSize; |
| |
| EventFunctionWrapper tickEvent; |
| |
| /** |
| * Setup an instruction break if there is one pending. |
| * |
| * Check if there are pending instruction breaks in the CPU's |
| * instruction event queue and schedule an instruction break using |
| * PerfEvent. |
| * |
| * @note This method doesn't currently handle the main system |
| * instruction event queue. |
| */ |
| void setupInstStop(); |
| |
| /** @{ */ |
| /** Setup hardware performance counters */ |
| void setupCounters(); |
| |
| /** |
| * Setup the guest instruction counter. |
| * |
| * Setup the guest instruction counter and optionally request a |
| * signal every N instructions executed by the guest. This method |
| * will re-attach the counter if the counter has already been |
| * attached and its sampling settings have changed. |
| * |
| * @param period Signal period, set to 0 to disable signaling. |
| */ |
| void setupInstCounter(uint64_t period = 0); |
| |
| /** Currently active instruction count breakpoint */ |
| uint64_t activeInstPeriod; |
| |
| /** |
| * Guest cycle counter. |
| * |
| * This is the group leader of all performance counters measuring |
| * the guest system. It can be used in conjunction with the |
| * PerfKvmTimer (see perfControlledByTimer) to trigger exits from |
| * KVM. |
| */ |
| PerfKvmCounter hwCycles; |
| |
| /** |
| * Guest instruction counter. |
| * |
| * This counter is typically only used to measure the number of |
| * instructions executed by the guest. However, it can also be |
| * used to trigger exits from KVM if the configuration script |
| * requests an exit after a certain number of instructions. |
| * |
| * @see setupInstBreak |
| * @see scheduleInstStop |
| */ |
| PerfKvmCounter hwInstructions; |
| |
| /** |
| * Does the runTimer control the performance counters? |
| * |
| * The run timer will automatically enable and disable performance |
| * counters if a PerfEvent-based timer is used to control KVM |
| * exits. |
| */ |
| bool perfControlledByTimer; |
| /** @} */ |
| |
| /** |
| * Timer used to force execution into the monitor after a |
| * specified number of simulation tick equivalents have executed |
| * in the guest. This counter generates the signal specified by |
| * KVM_TIMER_SIGNAL. |
| */ |
| std::unique_ptr<BaseKvmTimer> runTimer; |
| |
| /** Host factor as specified in the configuration */ |
| float hostFactor; |
| |
| public: |
| /* @{ */ |
| Stats::Scalar numInsts; |
| Stats::Scalar numVMExits; |
| Stats::Scalar numVMHalfEntries; |
| Stats::Scalar numExitSignal; |
| Stats::Scalar numMMIO; |
| Stats::Scalar numCoalescedMMIO; |
| Stats::Scalar numIO; |
| Stats::Scalar numHalt; |
| Stats::Scalar numInterrupts; |
| Stats::Scalar numHypercalls; |
| /* @} */ |
| |
| /** Number of instructions executed by the CPU */ |
| Counter ctrInsts; |
| }; |
| |
| #endif |
