| /* |
| * Copyright (c) 2010-2013, 2015, 2017 ARM Limited |
| * All rights reserved |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| |
| /** @file |
| * Implementiation of the ARM HDLcd controller. |
| * |
| * This implementation aims to have sufficient detail such that underrun |
| * conditions are reasonable / behave similar to reality. There are two |
| * 'engines' going at once. First, the DMA engine running at LCD clock |
| * frequency is responsible for filling the controller's internal buffer. |
| * The second engine runs at the pixel clock frequency and reads the pixels |
| * out of the internal buffer. The pixel rendering engine uses front / back |
| * porch and sync delays between lines and frames. |
| * |
| * If the pixel rendering engine does not have a pixel to display, it will |
| * cause an underrun event. The HDLcd controller, per spec, will stop |
| * issuing DMA requests for the rest of the frame and resume normal behavior |
| * on the subsequent frame. What pixels are rendered upon an underrun |
| * condition is different than the real hardware; while the user will see |
| * artifacts (previous frame mixed with current frame), it is not the same |
| * behavior as real hardware which repeats the last pixel value for the rest |
| * of the current frame. This compromise was made to save on memory and |
| * complexity and assumes that it is not important to accurately model the |
| * content of an underrun frame. |
| * |
| * KNOWN ISSUES |
| * <ul> |
| * <li>The HDLcd is implemented here as an AmbaDmaDevice, but it |
| * doesn't have an AMBA ID as far as I know. That is the only |
| * bit of the AmbaDmaDevice interface that is irrelevant to it, |
| * so a fake AMBA ID is used for now. I didn't think inserting |
| * an extra layer of hierachy between AmbaDmaDevice and |
| * DmaDevice would be helpful to anyone else, but that may be |
| * the right answer. |
| * </ul> |
| */ |
| |
| #ifndef __DEV_ARM_HDLCD_HH__ |
| #define __DEV_ARM_HDLCD_HH__ |
| |
| #include <fstream> |
| #include <memory> |
| |
| #include "base/framebuffer.hh" |
| #include "base/imgwriter.hh" |
| #include "base/output.hh" |
| #include "dev/arm/amba_device.hh" |
| #include "dev/pixelpump.hh" |
| #include "sim/serialize.hh" |
| |
| class VncInput; |
| struct HDLcdParams; |
| class HDLcdPixelPump; |
| |
| class HDLcd: public AmbaDmaDevice |
| { |
| public: |
| HDLcd(const HDLcdParams *p); |
| ~HDLcd(); |
| |
| void regStats() override; |
| |
| void serialize(CheckpointOut &cp) const override; |
| void unserialize(CheckpointIn &cp) override; |
| |
| void drainResume() override; |
| |
| public: // IO device interface |
| Tick read(PacketPtr pkt) override; |
| Tick write(PacketPtr pkt) override; |
| |
| AddrRangeList getAddrRanges() const override { return addrRanges; } |
| |
| protected: // Parameters |
| VncInput *vnc; |
| const bool workaroundSwapRB; |
| const bool workaroundDmaLineCount; |
| const AddrRangeList addrRanges; |
| const bool enableCapture; |
| const Addr pixelBufferSize; |
| const Tick virtRefreshRate; |
| |
| protected: // Register handling |
| /** ARM HDLcd register offsets */ |
| enum RegisterOffset { |
| Version = 0x0000, |
| Int_RawStat = 0x0010, |
| Int_Clear = 0x0014, |
| Int_Mask = 0x0018, |
| Int_Status = 0x001C, |
| Fb_Base = 0x0100, |
| Fb_Line_Length = 0x0104, |
| Fb_Line_Count = 0x0108, |
| Fb_Line_Pitch = 0x010C, |
| Bus_Options = 0x0110, |
| V_Sync = 0x0200, |
| V_Back_Porch = 0x0204, |
| V_Data = 0x0208, |
| V_Front_Porch = 0x020C, |
| H_Sync = 0x0210, |
| H_Back_Porch = 0x0214, |
| H_Data = 0x0218, |
| H_Front_Porch = 0x021C, |
| Polarities = 0x0220, |
| Command = 0x0230, |
| Pixel_Format = 0x0240, |
| Red_Select = 0x0244, |
| Green_Select = 0x0248, |
| Blue_Select = 0x024C, |
| }; |
| |
| /** Reset value for Bus_Options register */ |
| static constexpr size_t BUS_OPTIONS_RESETV = 0x408; |
| |
| /** Reset value for Version register */ |
| static constexpr size_t VERSION_RESETV = 0x1CDC0000; |
| |
| /** AXI port width in bytes */ |
| static constexpr size_t AXI_PORT_WIDTH = 8; |
| |
| /** max number of beats delivered in one dma burst */ |
| static constexpr size_t MAX_BURST_LEN = 16; |
| |
| /** Maximum number of bytes per pixel */ |
| static constexpr size_t MAX_PIXEL_SIZE = 4; |
| |
| /** |
| * @name RegisterFieldLayouts |
| * Bit layout declarations for multi-field registers. |
| */ |
| /**@{*/ |
| BitUnion32(VersionReg) |
| Bitfield<7,0> version_minor; |
| Bitfield<15,8> version_major; |
| Bitfield<31,16> product_id; |
| EndBitUnion(VersionReg) |
| |
| static constexpr uint32_t INT_DMA_END = (1UL << 0); |
| static constexpr uint32_t INT_BUS_ERROR = (1UL << 1); |
| static constexpr uint32_t INT_VSYNC = (1UL << 2); |
| static constexpr uint32_t INT_UNDERRUN = (1UL << 3); |
| |
| BitUnion32(FbLineCountReg) |
| Bitfield<11,0> fb_line_count; |
| Bitfield<31,12> reserved_31_12; |
| EndBitUnion(FbLineCountReg) |
| |
| BitUnion32(BusOptsReg) |
| Bitfield<4,0> burst_len; |
| Bitfield<7,5> reserved_7_5; |
| Bitfield<11,8> max_outstanding; |
| Bitfield<31,12> reserved_31_12; |
| EndBitUnion(BusOptsReg) |
| |
| BitUnion32(TimingReg) |
| Bitfield<11,0> val; |
| Bitfield<31,12> reserved_31_12; |
| EndBitUnion(TimingReg) |
| |
| BitUnion32(PolaritiesReg) |
| Bitfield<0> vsync_polarity; |
| Bitfield<1> hsync_polarity; |
| Bitfield<2> dataen_polarity; |
| Bitfield<3> data_polarity; |
| Bitfield<4> pxlclk_polarity; |
| Bitfield<31,5> reserved_31_5; |
| EndBitUnion(PolaritiesReg) |
| |
| BitUnion32(CommandReg) |
| Bitfield<0> enable; |
| Bitfield<31,1> reserved_31_1; |
| EndBitUnion(CommandReg) |
| |
| BitUnion32(PixelFormatReg) |
| Bitfield<2,0> reserved_2_0; |
| Bitfield<4,3> bytes_per_pixel; |
| Bitfield<30,5> reserved_30_5; |
| Bitfield<31> big_endian; |
| EndBitUnion(PixelFormatReg) |
| |
| BitUnion32(ColorSelectReg) |
| Bitfield<4,0> offset; |
| Bitfield<7,5> reserved_7_5; |
| Bitfield<11,8> size; |
| Bitfield<15,12> reserved_15_12; |
| Bitfield<23,16> default_color; |
| Bitfield<31,24> reserved_31_24; |
| EndBitUnion(ColorSelectReg) |
| /**@}*/ |
| |
| /** |
| * @name HDLCDRegisters |
| * HDLCD register contents. |
| */ |
| /**@{*/ |
| const VersionReg version; /**< Version register */ |
| uint32_t int_rawstat; /**< Interrupt raw status register */ |
| uint32_t int_mask; /**< Interrupt mask register */ |
| uint32_t fb_base; /**< Frame buffer base address register */ |
| uint32_t fb_line_length; /**< Frame buffer Line length register */ |
| FbLineCountReg fb_line_count; /**< Frame buffer Line count register */ |
| int32_t fb_line_pitch; /**< Frame buffer Line pitch register */ |
| BusOptsReg bus_options; /**< Bus options register */ |
| TimingReg v_sync; /**< Vertical sync width register */ |
| TimingReg v_back_porch; /**< Vertical back porch width register */ |
| TimingReg v_data; /**< Vertical data width register */ |
| TimingReg v_front_porch; /**< Vertical front porch width register */ |
| TimingReg h_sync; /**< Horizontal sync width register */ |
| TimingReg h_back_porch; /**< Horizontal back porch width register */ |
| TimingReg h_data; /**< Horizontal data width register */ |
| TimingReg h_front_porch; /**< Horizontal front porch width reg */ |
| PolaritiesReg polarities; /**< Polarities register */ |
| CommandReg command; /**< Command register */ |
| PixelFormatReg pixel_format; /**< Pixel format register */ |
| ColorSelectReg red_select; /**< Red color select register */ |
| ColorSelectReg green_select; /**< Green color select register */ |
| ColorSelectReg blue_select; /**< Blue color select register */ |
| /** @} */ |
| |
| uint32_t readReg(Addr offset); |
| void writeReg(Addr offset, uint32_t value); |
| |
| PixelConverter pixelConverter() const; |
| DisplayTimings displayTimings() const; |
| |
| void createDmaEngine(); |
| |
| void cmdEnable(); |
| void cmdDisable(); |
| |
| bool enabled() const { return command.enable; } |
| |
| public: // Pixel pump callbacks |
| bool pxlNext(Pixel &p); |
| void pxlVSyncBegin(); |
| void pxlVSyncEnd(); |
| void pxlUnderrun(); |
| void pxlFrameDone(); |
| |
| protected: // Interrupt handling |
| /** |
| * Assign new interrupt values and update interrupt signals |
| * |
| * A new interrupt is scheduled signalled if the set of unmasked |
| * interrupts goes empty to non-empty. Conversely, if the set of |
| * unmasked interrupts goes from non-empty to empty, the interrupt |
| * signal is cleared. |
| * |
| * @param ints New <i>raw</i> interrupt status |
| * @param mask New interrupt mask |
| */ |
| void setInterrupts(uint32_t ints, uint32_t mask); |
| |
| /** |
| * Convenience function to update the interrupt mask |
| * |
| * @see setInterrupts |
| * @param mask New interrupt mask |
| */ |
| void intMask(uint32_t mask) { setInterrupts(int_rawstat, mask); } |
| |
| /** |
| * Convenience function to raise a new interrupt |
| * |
| * @see setInterrupts |
| * @param ints Set of interrupts to raise |
| */ |
| void intRaise(uint32_t ints) { |
| setInterrupts(int_rawstat | ints, int_mask); |
| } |
| |
| /** |
| * Convenience function to clear interrupts |
| * |
| * @see setInterrupts |
| * @param ints Set of interrupts to clear |
| */ |
| void intClear(uint32_t ints) { |
| setInterrupts(int_rawstat & ~ints, int_mask); |
| } |
| |
| /** Masked interrupt status register */ |
| uint32_t intStatus() const { return int_rawstat & int_mask; } |
| |
| protected: // Pixel output |
| class PixelPump : public BasePixelPump |
| { |
| public: |
| PixelPump(HDLcd &p, ClockDomain &pxl_clk, unsigned pixel_chunk) |
| : BasePixelPump(p, pxl_clk, pixel_chunk), parent(p) {} |
| |
| void dumpSettings(); |
| |
| protected: |
| bool nextPixel(Pixel &p) override { return parent.pxlNext(p); } |
| |
| void onVSyncBegin() override { return parent.pxlVSyncBegin(); } |
| void onVSyncEnd() override { return parent.pxlVSyncEnd(); } |
| |
| void onUnderrun(unsigned x, unsigned y) override { |
| parent.pxlUnderrun(); |
| } |
| |
| void onFrameDone() override { parent.pxlFrameDone(); } |
| |
| protected: |
| HDLcd &parent; |
| }; |
| |
| /** Handler for fast frame refresh in KVM-mode */ |
| void virtRefresh(); |
| EventFunctionWrapper virtRefreshEvent; |
| |
| /** Helper to write out bitmaps */ |
| std::unique_ptr<ImgWriter> imgWriter; |
| |
| /** Image Format */ |
| Enums::ImageFormat imgFormat; |
| |
| /** Picture of what the current frame buffer looks like */ |
| OutputStream *pic; |
| |
| /** Cached pixel converter, set when the converter is enabled. */ |
| PixelConverter conv; |
| |
| PixelPump pixelPump; |
| |
| protected: // DMA handling |
| class DmaEngine : public DmaReadFifo |
| { |
| public: |
| DmaEngine(HDLcd &_parent, size_t size, |
| unsigned request_size, unsigned max_pending, |
| size_t line_size, ssize_t line_pitch, unsigned num_lines); |
| |
| void startFrame(Addr fb_base); |
| void abortFrame(); |
| void dumpSettings(); |
| |
| void serialize(CheckpointOut &cp) const override; |
| void unserialize(CheckpointIn &cp) override; |
| |
| protected: |
| void onEndOfBlock() override; |
| void onIdle() override; |
| |
| HDLcd &parent; |
| const size_t lineSize; |
| const ssize_t linePitch; |
| const unsigned numLines; |
| |
| Addr nextLineAddr; |
| Addr frameEnd; |
| }; |
| |
| std::unique_ptr<DmaEngine> dmaEngine; |
| |
| protected: // Statistics |
| struct { |
| Stats::Scalar underruns; |
| } stats; |
| }; |
| |
| #endif |