| /* Copyright (c) 2012 Massachusetts Institute of Technology |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
| * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "model/std_cells/CellMacros.h" |
| |
| #include <cmath> |
| #include <vector> |
| |
| #include "model/std_cells/StdCell.h" |
| #include "model/timing_graph/ElectricalNet.h" |
| #include "model/timing_graph/ElectricalDriver.h" |
| #include "model/timing_graph/ElectricalLoad.h" |
| |
| namespace DSENT |
| { |
| //------------------------------------------------------------------------- |
| // NOR2 Macro (TODO: Generalize to N-input macro once leakage calc is done) |
| //------------------------------------------------------------------------- |
| void CellMacros::addNor2(StdCell* cell_, const String& name_, |
| bool sizable_, bool a1_to_zn_path_, bool a2_to_zn_path_, |
| const String& a1_net_, const String& a2_net_, const String& zn_net_) |
| { |
| //Create electrical timing model for the nand |
| // Construct loads and drivers |
| cell_->createLoad(name_ + "_CgA1"); |
| cell_->createLoad(name_ + "_CgA2"); |
| cell_->createLoad(name_ + "_CdZN"); |
| cell_->createDriver(name_ + "_RonZN", sizable_); |
| |
| //Get references to loads and drivers |
| ElectricalLoad* gate_a1_load = cell_->getLoad(name_ + "_CgA1"); |
| ElectricalLoad* gate_a2_load = cell_->getLoad(name_ + "_CgA2"); |
| ElectricalLoad* drain_load = cell_->getLoad(name_ + "_CdZN"); |
| ElectricalDriver* zn_drive = cell_->getDriver(name_ + "_RonZN"); |
| ElectricalNet* a1_net = cell_->getNet(a1_net_); |
| ElectricalNet* a2_net = cell_->getNet(a2_net_); |
| ElectricalNet* zn_net = cell_->getNet(zn_net_); |
| |
| //Add loads and drivers to the specified nets |
| a1_net->addDownstreamNode(gate_a1_load); |
| a2_net->addDownstreamNode(gate_a2_load); |
| zn_net->addDownstreamNode(drain_load); |
| if (a1_to_zn_path_) gate_a1_load->addDownstreamNode(zn_drive); |
| if (a2_to_zn_path_) gate_a2_load->addDownstreamNode(zn_drive); |
| zn_drive->addDownstreamNode(zn_net); |
| |
| return; |
| } |
| |
| void CellMacros::updateNor2(StdCell* cell_, const String& name_, double normalized_size_) |
| { |
| ASSERT(normalized_size_ >= 0.0, "[Error] " + cell_->getInstanceName() + |
| " -> Cannot update a macro with a negative normalized size!"); |
| |
| //Grab pointer to tech model |
| const TechModel* tech = cell_->getTechModel(); |
| |
| // Get technology parameters |
| double vdd = tech->get("Vdd"); |
| double gate_cap = tech->get("Gate->CapPerWidth"); |
| double drain_cap = tech->get("Drain->CapPerWidth"); |
| double nmos_eff_res = tech->get("Nmos->EffResWidth"); |
| double pmos_eff_res = tech->get("Pmos->EffResWidth"); |
| double pmos_eff_res_stack_ratio = tech->get("Pmos->EffResStackRatio"); |
| double gate_pitch_contacted = tech->get("Gate->PitchContacted"); |
| double metal1_wire_min_width = tech->get("Wire->Metal1->MinWidth"); |
| |
| //Calculate number of folds and gate pitches needed |
| unsigned int folds = (normalized_size_ < 1.0) ? 1 : (unsigned int)ceil(normalized_size_); |
| cell_->getGenProperties()->set(name_ + "_GatePitches", 2 * folds); |
| |
| //Calculate widths, making sure they are above the minimum width |
| double nmos_width = std::max(calculateNmosWidth(cell_, 1, 2, 1) * normalized_size_ / folds, (double) tech->get("Gate->MinWidth")); |
| double pmos_width = std::max(calculatePmosWidth(cell_, 1, 2, 2) * normalized_size_ / folds, (double) tech->get("Gate->MinWidth")); |
| |
| //Calculate leakage power for each given input state |
| double leakage_power_00 = vdd * folds * 2 * tech->calculateNmosLeakageCurrent(1, nmos_width, 0x0); |
| double leakage_power_01 = vdd * folds * tech->calculatePmosLeakageCurrent(2, pmos_width, ~0x1); |
| double leakage_power_10 = vdd * folds * tech->calculatePmosLeakageCurrent(2, pmos_width, ~0x2); |
| double leakage_power_11 = vdd * folds * tech->calculatePmosLeakageCurrent(2, pmos_width, ~0x3); |
| cell_->getGenProperties()->set(name_ + "_LeakagePower_00", leakage_power_00); |
| cell_->getGenProperties()->set(name_ + "_LeakagePower_01", leakage_power_01); |
| cell_->getGenProperties()->set(name_ + "_LeakagePower_10", leakage_power_10); |
| cell_->getGenProperties()->set(name_ + "_LeakagePower_11", leakage_power_11); |
| |
| //Calculate R_on and capacitances |
| double pmos_stack2_balance = 1.0 + pmos_eff_res_stack_ratio; |
| double c_g = (nmos_width + pmos_width) * gate_cap * folds; |
| double c_d = (2 * pmos_width + 2 * nmos_width) * drain_cap * folds; |
| double r_on = (nmos_eff_res / nmos_width + pmos_stack2_balance * pmos_eff_res / pmos_width) / (folds * 2.0); |
| |
| // Estimate the wire cap and add them all at the output |
| double cell_height = cell_->getTotalHeight(); |
| double wire_width = metal1_wire_min_width; |
| double wire_spacing = gate_pitch_contacted - metal1_wire_min_width; |
| double wire_length = 2.0 * folds * cell_height; |
| double wire_cap = tech->calculateWireCapacitance("Metal1", wire_width, wire_spacing, wire_length); |
| |
| // Construct equivalent load and drive strength |
| cell_->getLoad(name_ + "_CgA1")->setLoadCap(c_g); |
| cell_->getLoad(name_ + "_CgA2")->setLoadCap(c_g); |
| cell_->getLoad(name_ + "_CdZN")->setLoadCap(c_d + wire_cap); |
| cell_->getDriver(name_ + "_RonZN")->setOutputRes(r_on); |
| |
| // Calculate flip energies |
| double zn_flip_energy = 0.5 * (c_d + wire_cap) * vdd * vdd; |
| double a1_flip_energy = 0.5 * c_g * vdd * vdd; |
| double a2_flip_energy = 0.5 * c_g * vdd * vdd; |
| cell_->getGenProperties()->set(name_ + "_ZN_Flip", zn_flip_energy); |
| cell_->getGenProperties()->set(name_ + "_A1_Flip", a1_flip_energy); |
| cell_->getGenProperties()->set(name_ + "_A2_Flip", a2_flip_energy); |
| } |
| //------------------------------------------------------------------------- |
| |
| //------------------------------------------------------------------------- |
| // NAND2 Macro (TODO: Generalize to N-input macro once leakage calc is done) |
| //------------------------------------------------------------------------- |
| //Adds a NAND2 to the standard cell, normalized to some size |
| void CellMacros::addNand2(StdCell* cell_, const String& name_, |
| bool sizable_, bool a1_to_zn_path_, bool a2_to_zn_path_, |
| const String& a1_net_, const String& a2_net_, const String& zn_net_) |
| { |
| //Create electrical timing model for the nor |
| // Construct loads and drivers |
| cell_->createLoad(name_ + "_CgA1"); |
| cell_->createLoad(name_ + "_CgA2"); |
| cell_->createLoad(name_ + "_CdZN"); |
| cell_->createDriver(name_ + "_RonZN", sizable_); |
| |
| //Get references to loads and drivers |
| ElectricalLoad* gate_a1_load = cell_->getLoad(name_ + "_CgA1"); |
| ElectricalLoad* gate_a2_load = cell_->getLoad(name_ + "_CgA2"); |
| ElectricalLoad* drain_load = cell_->getLoad(name_ + "_CdZN"); |
| ElectricalDriver* zn_drive = cell_->getDriver(name_ + "_RonZN"); |
| ElectricalNet* a1_net = cell_->getNet(a1_net_); |
| ElectricalNet* a2_net = cell_->getNet(a2_net_); |
| ElectricalNet* zn_net = cell_->getNet(zn_net_); |
| |
| a1_net->addDownstreamNode(gate_a1_load); |
| a2_net->addDownstreamNode(gate_a2_load); |
| zn_net->addDownstreamNode(drain_load); |
| if (a1_to_zn_path_) gate_a1_load->addDownstreamNode(zn_drive); |
| if (a2_to_zn_path_) gate_a2_load->addDownstreamNode(zn_drive); |
| zn_drive->addDownstreamNode(zn_net); |
| |
| return; |
| } |
| |
| //Updates a NAND2 to to the standard cell, normalized to some size |
| void CellMacros::updateNand2(StdCell* cell_, const String& name_, double normalized_size_) |
| { |
| ASSERT(normalized_size_ >= 0.0, "[Error] " + cell_->getInstanceName() + |
| " -> Cannot update a macro with a negative normalized size!"); |
| |
| //Grab pointer to tech model |
| const TechModel* tech = cell_->getTechModel(); |
| |
| // Get technology parameters |
| double vdd = tech->get("Vdd"); |
| double gate_cap = tech->get("Gate->CapPerWidth"); |
| double drain_cap = tech->get("Drain->CapPerWidth"); |
| double nmos_eff_res = tech->get("Nmos->EffResWidth"); |
| double pmos_eff_res = tech->get("Pmos->EffResWidth"); |
| double nmos_eff_res_stack_ratio = tech->get("Nmos->EffResStackRatio"); |
| double gate_pitch_contacted = tech->get("Gate->PitchContacted"); |
| double metal1_wire_min_width = tech->get("Wire->Metal1->MinWidth"); |
| |
| //Calculate number of folds needed |
| unsigned int folds = (normalized_size_ < 1.0) ? 1 : (unsigned int)ceil(normalized_size_); |
| cell_->getGenProperties()->set(name_ + "_GatePitches", 2 * folds); |
| |
| //Calculate widths, making sure they are above the minimum width |
| double nmos_width = std::max(calculateNmosWidth(cell_, 2, 1, 2) * normalized_size_ / folds, (double) tech->get("Gate->MinWidth")); |
| double pmos_width = std::max(calculatePmosWidth(cell_, 2, 1, 1) * normalized_size_ / folds, (double) tech->get("Gate->MinWidth")); |
| |
| // Leakage power calculation |
| double leakage_power_00 = vdd * folds * tech->calculateNmosLeakageCurrent(2, nmos_width, 0x0); |
| double leakage_power_01 = vdd * folds * tech->calculateNmosLeakageCurrent(2, nmos_width, 0x1); |
| double leakage_power_10 = vdd * folds * tech->calculateNmosLeakageCurrent(2, nmos_width, 0x2); |
| double leakage_power_11 = vdd * folds * 2 * tech->calculatePmosLeakageCurrent(1, pmos_width, ~0x3); |
| cell_->getGenProperties()->set(name_ + "_LeakagePower_00", leakage_power_00); |
| cell_->getGenProperties()->set(name_ + "_LeakagePower_01", leakage_power_01); |
| cell_->getGenProperties()->set(name_ + "_LeakagePower_10", leakage_power_10); |
| cell_->getGenProperties()->set(name_ + "_LeakagePower_11", leakage_power_11); |
| |
| // Get input parameters |
| double nmos_stack2_balance = 1.0 + nmos_eff_res_stack_ratio; |
| |
| //Calculate caps |
| double c_g = (nmos_width + pmos_width) * gate_cap * folds; |
| double c_d = (2 * pmos_width + 2 * nmos_width) * drain_cap * folds; |
| double r_on = (nmos_stack2_balance * nmos_eff_res / nmos_width + pmos_eff_res / pmos_width) / (folds * 2.0); |
| |
| // Estimate the wire cap and add them all at the output |
| double cell_height = cell_->getTotalHeight(); |
| double wire_width = metal1_wire_min_width; |
| double wire_spacing = gate_pitch_contacted - metal1_wire_min_width; |
| double wire_length = 2.0 * folds * cell_height; |
| double wire_cap = tech->calculateWireCapacitance("Metal1", wire_width, wire_spacing, wire_length); |
| |
| // Construct equivalent load and drive strength |
| cell_->getLoad(name_ + "_CgA1")->setLoadCap(c_g); |
| cell_->getLoad(name_ + "_CgA2")->setLoadCap(c_g); |
| cell_->getLoad(name_ + "_CdZN")->setLoadCap(c_d + wire_cap); |
| cell_->getDriver(name_ + "_RonZN")->setOutputRes(r_on); |
| |
| // Calculate flip energies |
| double zn_flip_energy = 0.5 * (c_d + wire_cap) * vdd * vdd; |
| double a1_flip_energy = 0.5 * c_g * vdd * vdd; |
| double a2_flip_energy = 0.5 * c_g * vdd * vdd; |
| cell_->getGenProperties()->set(name_ + "_ZN_Flip", zn_flip_energy); |
| cell_->getGenProperties()->set(name_ + "_A1_Flip", a1_flip_energy); |
| cell_->getGenProperties()->set(name_ + "_A2_Flip", a2_flip_energy); |
| } |
| //------------------------------------------------------------------------- |
| |
| //------------------------------------------------------------------------- |
| // INV Macro |
| //------------------------------------------------------------------------- |
| //Adds an inverter to the model, normalized to some size |
| void CellMacros::addInverter(StdCell* cell_, const String& name_, |
| bool sizable_, bool a_to_zn_path_, |
| const String& a_net_, const String& zn_net_) |
| { |
| //Create electrical timing model for the inverter |
| // Construct loads and drivers |
| cell_->createLoad(name_ + "_CgA"); |
| cell_->createLoad(name_ + "_CdZN"); |
| cell_->createDriver(name_ + "_RonZN", sizable_); |
| |
| //Get references to loads and drivers |
| ElectricalLoad* gate_load = cell_->getLoad(name_ + "_CgA"); |
| ElectricalLoad* drain_load = cell_->getLoad(name_ + "_CdZN"); |
| ElectricalDriver* out_drive = cell_->getDriver(name_ + "_RonZN"); |
| ElectricalNet* a_net = cell_->getNet(a_net_); |
| ElectricalNet* zn_net = cell_->getNet(zn_net_); |
| |
| // Setup connectivity of loads and drivers |
| a_net->addDownstreamNode(gate_load); |
| if (a_to_zn_path_) gate_load->addDownstreamNode(out_drive); |
| zn_net->addDownstreamNode(drain_load); |
| out_drive->addDownstreamNode(zn_net); |
| |
| return; |
| } |
| |
| //Updates the numbers of an inverter for some normalized size |
| void CellMacros::updateInverter(StdCell* cell_, const String& name_, double normalized_size_) |
| { |
| ASSERT(normalized_size_ >= 0.0, "[Error] " + cell_->getInstanceName() + |
| " -> Cannot update a macro with a negative normalized size!"); |
| |
| //Grab pointer to tech model |
| const TechModel* tech = cell_->getTechModel(); |
| |
| //Get values from technology library |
| double vdd = tech->get("Vdd"); |
| double gate_cap = tech->get("Gate->CapPerWidth"); |
| double drain_cap = tech->get("Drain->CapPerWidth"); |
| double nmos_eff_res = tech->get("Nmos->EffResWidth"); |
| double pmos_eff_res = tech->get("Pmos->EffResWidth"); |
| double gate_pitch_contacted = tech->get("Gate->PitchContacted"); |
| double metal1_wire_min_width = tech->get("Wire->Metal1->MinWidth"); |
| |
| //Calculate number of folds needed |
| unsigned int folds = (normalized_size_ < 1.0) ? 1 : (unsigned int)ceil(normalized_size_); |
| cell_->getGenProperties()->set(name_ + "_GatePitches", folds); |
| |
| //Calculate widths, making sure they are above the minimum width |
| double nmos_width = std::max(calculateNmosWidth(cell_, 1, 1, 1) * normalized_size_ / folds, (double) tech->get("Gate->MinWidth")); |
| double pmos_width = std::max(calculatePmosWidth(cell_, 1, 1, 1) * normalized_size_ / folds, (double) tech->get("Gate->MinWidth")); |
| |
| //Calculate leakage power for each given input state |
| double leakage_power_0 = vdd * folds * tech->calculateNmosLeakageCurrent(1, nmos_width, 0x0); |
| double leakage_power_1 = vdd * folds * tech->calculatePmosLeakageCurrent(1, pmos_width, ~0x1); |
| cell_->getGenProperties()->set(name_ + "_LeakagePower_0", leakage_power_0); |
| cell_->getGenProperties()->set(name_ + "_LeakagePower_1", leakage_power_1); |
| |
| //Calculate caps |
| double c_g = (nmos_width + pmos_width) * gate_cap * folds; |
| double c_d = (pmos_width + nmos_width) * drain_cap * folds; |
| double r_on = (nmos_eff_res / nmos_width + pmos_eff_res / pmos_width) / (folds * 2.0); |
| |
| // Estimate the wire cap and add them all at the output |
| double cell_height = cell_->getTotalHeight(); |
| double wire_width = metal1_wire_min_width; |
| double wire_spacing = gate_pitch_contacted - metal1_wire_min_width; |
| double wire_length = folds * cell_height; |
| double wire_cap = tech->calculateWireCapacitance("Metal1", wire_width, wire_spacing, wire_length); |
| |
| // Construct equivalent load and drive strength |
| cell_->getLoad(name_ + "_CgA")->setLoadCap(c_g); |
| cell_->getLoad(name_ + "_CdZN")->setLoadCap(c_d + wire_cap); |
| cell_->getDriver(name_ + "_RonZN")->setOutputRes(r_on); |
| |
| // Calculate flip energy (output flip) |
| // Calculate flip energies |
| double zn_flip_energy = 0.5 * (c_d + wire_cap) * vdd * vdd; |
| double a_flip_energy = 0.5 * c_g * vdd * vdd; |
| cell_->getGenProperties()->set(name_ + "_ZN_Flip", zn_flip_energy); |
| cell_->getGenProperties()->set(name_ + "_A_Flip", a_flip_energy); |
| |
| return; |
| } |
| //------------------------------------------------------------------------- |
| |
| //------------------------------------------------------------------------- |
| // INVZ Macro |
| //------------------------------------------------------------------------- |
| //Adds a tristated inverter to the model, normalized to some size |
| void CellMacros::addTristate(StdCell* cell_, const String& name_, |
| bool sizable_, bool a_to_zn_path_, bool oe_to_zn_path_, bool oen_to_zn_path_, |
| const String& a_net_, const String& oe_net_, const String& oen_net_, const String& zn_net_) |
| { |
| // Construct loads and drivers |
| cell_->createLoad(name_ + "_CgA"); |
| cell_->createLoad(name_ + "_CgOE"); |
| cell_->createLoad(name_ + "_CgOEN"); |
| cell_->createLoad(name_ + "_CdZN"); |
| cell_->createDriver(name_ + "_RonZN", sizable_); |
| |
| // Get references to loads, nets and drivers |
| ElectricalLoad* gate_a_load = cell_->getLoad(name_ + "_CgA"); |
| ElectricalLoad* gate_oe_load = cell_->getLoad(name_ + "_CgOE"); |
| ElectricalLoad* gate_oen_load = cell_->getLoad(name_ + "_CgOEN"); |
| ElectricalLoad* drain_load = cell_->getLoad(name_ + "_CdZN"); |
| ElectricalDriver* out_drive = cell_->getDriver(name_ + "_RonZN"); |
| ElectricalNet* a_net = cell_->getNet(a_net_); |
| ElectricalNet* oe_net = cell_->getNet(oe_net_); |
| ElectricalNet* oen_net = cell_->getNet(oen_net_); |
| ElectricalNet* zn_net = cell_->getNet(zn_net_); |
| |
| // Setup connectivity of loads and drivers |
| a_net->addDownstreamNode(gate_a_load); |
| oe_net->addDownstreamNode(gate_oe_load); |
| oen_net->addDownstreamNode(gate_oen_load); |
| if (a_to_zn_path_) gate_a_load->addDownstreamNode(out_drive); |
| if (oe_to_zn_path_) gate_oe_load->addDownstreamNode(out_drive); |
| if (oen_to_zn_path_) gate_oen_load->addDownstreamNode(out_drive); |
| zn_net->addDownstreamNode(drain_load); |
| out_drive->addDownstreamNode(zn_net); |
| |
| return; |
| } |
| |
| //Updates the numbers of an inverter for some normalized size |
| void CellMacros::updateTristate(StdCell* cell_, const String& name_, double normalized_size_) |
| { |
| ASSERT(normalized_size_ >= 0.0, "[Error] " + cell_->getInstanceName() + |
| " -> Cannot update a macro with a negative normalized size!"); |
| |
| //Grab pointer to tech model |
| const TechModel* tech = cell_->getTechModel(); |
| |
| //Get values from technology library |
| double vdd = tech->get("Vdd"); |
| double gate_cap = tech->get("Gate->CapPerWidth"); |
| double drain_cap = tech->get("Drain->CapPerWidth"); |
| double nmos_eff_res = tech->get("Nmos->EffResWidth"); |
| double pmos_eff_res = tech->get("Pmos->EffResWidth"); |
| double pmos_eff_res_stack_ratio = tech->get("Pmos->EffResStackRatio"); |
| double nmos_eff_res_stack_ratio = tech->get("Nmos->EffResStackRatio"); |
| double gate_pitch_contacted = tech->get("Gate->PitchContacted"); |
| double metal1_wire_min_width = tech->get("Wire->Metal1->MinWidth"); |
| |
| //Calculate number of folds and gate pitches needed |
| unsigned int folds = (normalized_size_ < 1.0) ? 1 : (unsigned int)ceil(normalized_size_); |
| cell_->getGenProperties()->set(name_ + "_GatePitches", 2 * folds); |
| |
| //Calculate widths, making sure they are above the minimum width |
| double nmos_width = std::max(calculateNmosWidth(cell_, 2, 2, 2) * normalized_size_ / folds, (double) tech->get("Gate->MinWidth")); |
| double pmos_width = std::max(calculatePmosWidth(cell_, 2, 2, 2) * normalized_size_ / folds, (double) tech->get("Gate->MinWidth")); |
| |
| //Calculate leakage power for each given input state |
| //if output_enable = 0, then it is possible that the PMOS may leak (if output = 0), |
| //or the NMOS will leak (if output = 1) |
| |
| //OE OEN A _ ZN |
| double leakage_power_010_0 = vdd * folds * tech->calculatePmosLeakageCurrent(2, pmos_width, ~0x2); |
| double leakage_power_010_1 = vdd * folds * tech->calculateNmosLeakageCurrent(2, nmos_width, 0x0); |
| double leakage_power_011_0 = vdd * folds * tech->calculatePmosLeakageCurrent(2, pmos_width, ~0x3); |
| double leakage_power_011_1 = vdd * folds * tech->calculateNmosLeakageCurrent(2, nmos_width, 0x1); |
| double leakage_power_100_1 = vdd * folds * tech->calculateNmosLeakageCurrent(2, nmos_width, 0x2); |
| double leakage_power_101_0 = vdd * folds * tech->calculatePmosLeakageCurrent(2, pmos_width, ~0x1); |
| cell_->getGenProperties()->set(name_ + "_LeakagePower_010_0", leakage_power_010_0); |
| cell_->getGenProperties()->set(name_ + "_LeakagePower_010_1", leakage_power_010_1); |
| cell_->getGenProperties()->set(name_ + "_LeakagePower_011_0", leakage_power_011_0); |
| cell_->getGenProperties()->set(name_ + "_LeakagePower_011_1", leakage_power_011_1); |
| cell_->getGenProperties()->set(name_ + "_LeakagePower_100_1", leakage_power_100_1); |
| cell_->getGenProperties()->set(name_ + "_LeakagePower_101_0", leakage_power_101_0); |
| |
| //Caculate stack balance |
| double pmos_stack2_balance = 1.0 + pmos_eff_res_stack_ratio; |
| double nmos_stack2_balance = 1.0 + nmos_eff_res_stack_ratio; |
| |
| //Calculate caps |
| double c_g_a = (nmos_width + pmos_width) * gate_cap * folds; |
| double c_g_oe = nmos_width * gate_cap * folds; |
| double c_g_oen = pmos_width * gate_cap * folds; |
| double c_d = (2 * pmos_width + 2 * nmos_width) * drain_cap * folds; |
| double r_on = (nmos_stack2_balance * nmos_eff_res / nmos_width + pmos_stack2_balance * pmos_eff_res / pmos_width) / (folds * 2.0); |
| |
| // Estimate the wire cap and add them all at the output |
| double cell_height = cell_->getTotalHeight(); |
| double wire_width = metal1_wire_min_width; |
| double wire_spacing = gate_pitch_contacted - metal1_wire_min_width; |
| double wire_length = 2.0 * folds * cell_height; |
| double wire_cap = tech->calculateWireCapacitance("Metal1", wire_width, wire_spacing, wire_length); |
| |
| // Construct equivalent load and drive strength |
| cell_->getLoad(name_ + "_CgA")->setLoadCap(c_g_a); |
| cell_->getLoad(name_ + "_CgOE")->setLoadCap(c_g_oe); |
| cell_->getLoad(name_ + "_CgOEN")->setLoadCap(c_g_oen); |
| cell_->getLoad(name_ + "_CdZN")->setLoadCap(c_d + wire_cap); |
| cell_->getDriver(name_ + "_RonZN")->setOutputRes(r_on); |
| |
| // Calculate flip energy (output flip) |
| double zn_flip_energy = 0.5 * (c_d + wire_cap) * vdd * vdd; |
| double a_flip_energy = 0.5 * c_g_a * vdd * vdd; |
| double oe_flip_energy = 0.5 * c_g_oe * vdd * vdd; |
| double oen_flip_energy = 0.5 * c_g_oen * vdd * vdd; |
| cell_->getGenProperties()->set(name_ + "_ZN_Flip", zn_flip_energy); |
| cell_->getGenProperties()->set(name_ + "_A_Flip", a_flip_energy); |
| cell_->getGenProperties()->set(name_ + "_OE_Flip", oe_flip_energy); |
| cell_->getGenProperties()->set(name_ + "_OEN_Flip", oen_flip_energy); |
| return; |
| } |
| //------------------------------------------------------------------------- |
| |
| |
| //------------------------------------------------------------------------- |
| // Helper Functions |
| //------------------------------------------------------------------------- |
| //Returns the width of NMOS transistors, given the NMOS and PMOS stacking |
| double CellMacros::calculateNmosWidth(const StdCell* cell_, unsigned int max_stacked_nmos_, unsigned int max_stacked_pmos_, unsigned int current_stacked_nmos_) |
| { |
| //Grab pointer to tech model |
| const TechModel* tech = cell_->getTechModel(); |
| |
| double nmos_eff_res_stack_ratio = tech->get("Nmos->EffResStackRatio"); |
| double pmos_eff_res_stack_ratio = tech->get("Pmos->EffResStackRatio"); |
| |
| double nmos_stack_balance = 1.0 + nmos_eff_res_stack_ratio * (double) (max_stacked_nmos_ - 1); |
| double pmos_stack_balance = 1.0 + pmos_eff_res_stack_ratio * (double) (max_stacked_pmos_ - 1); |
| double current_nmos_stack_balance = 1.0 + nmos_eff_res_stack_ratio * (double) (current_stacked_nmos_ - 1); |
| |
| double pn_ratio = cell_->getPToNRatio(); |
| double active_height = cell_->getActiveHeight(); |
| |
| //Calculate the width of the current device |
| double nmos_width = active_height * current_nmos_stack_balance / (nmos_stack_balance + pn_ratio * pmos_stack_balance); |
| |
| return nmos_width; |
| } |
| |
| //Returns the width of PMOS transistors, given the NMOS and PMOS stacking |
| double CellMacros::calculatePmosWidth(const StdCell* cell_, unsigned int max_stacked_nmos_, unsigned int max_stacked_pmos_, unsigned int current_stacked_pmos_) |
| { |
| //Grab pointer to tech model |
| const TechModel* tech = cell_->getTechModel(); |
| |
| double nmos_eff_res_stack_ratio = tech->get("Nmos->EffResStackRatio"); |
| double pmos_eff_res_stack_ratio = tech->get("Pmos->EffResStackRatio"); |
| |
| double nmos_stack_balance = 1.0 + nmos_eff_res_stack_ratio * (double) (max_stacked_nmos_ - 1); |
| double pmos_stack_balance = 1.0 + pmos_eff_res_stack_ratio * (double) (max_stacked_pmos_ - 1); |
| double current_pmos_stack_balance = 1.0 + pmos_eff_res_stack_ratio * (double) (current_stacked_pmos_ - 1); |
| |
| double pn_ratio = cell_->getPToNRatio(); |
| double active_height = cell_->getActiveHeight(); |
| |
| //Calculate the width of the current device |
| double pmos_width = active_height * current_pmos_stack_balance * pn_ratio / (nmos_stack_balance + pn_ratio * pmos_stack_balance); |
| |
| return pmos_width; |
| } |
| //------------------------------------------------------------------------- |
| |
| } // namespace DSENT |
| |
