Google Git Google Git
Sign in
gem5/public/gem5/7185c9ea1936c0045858add1c8c116b15780debc/./src/dev/arm/ufs_device.hh
blob: ea58b853c4a377f0d6d9fbdbe458acd0f9f1bf79 [file]
/*
* Copyright (c) 2013-2015 ARM Limited
* All rights reserved
*
* The license below extends only to copyright in the software and shall
* not be construed as granting a license to any other intellectual
* property including but not limited to intellectual property relating
* to a hardware implementation of the functionality of the software
* licensed hereunder. You may use the software subject to the license
* terms below provided that you ensure that this notice is replicated
* unmodified and in its entirety in all distributions of the software,
* modified or unmodified, in source code or in binary form.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/** @file
* This is a base class for UFS devices
* The UFS interface consists out of one host controller which connects a
* number of devices which together contain up to 8 logic units. A Logical
* Unit is an externally addressable, independent, processing entity that
* processes SCSI tasks (commands) and performs task management functions.
* The decision has been made to abstract the device away, and model the
* different logic units. Effectively this means that there is one Host layer
* which handles all the UFS commands (everything UTP, UPIU and UNIpro
* related) and a SCSI layer, which handles the SCSI interpretation and the
* interaction with the "disk" (effectively the LBA that that particular
* Logic Unit controls). Each Logic unit should therefor control a disk image
* and a timing model. The UFS protocol has three types of commands
* (explained later). Each has different phases and each phase need to wait
* for its particular data. This is the reason that this model contains a lot
* of events. For clarity, a state diagram in doxygen has been provided. To
* fully apreciate the stages that the model flows through, the states have
* been broken into three state diagrams. It is best if one imagines the
* command flow state machine to be happening in the UFSHost layer, and the
* other two to flow through all the layers of the model (UFS host, SCSI and
* NVM model). See it as a quarry, one state diagram is moving the crane into
* place, and the other ones are transporting the dirt down, or the valuables
* up. For complete information about the working of UFS please refer to
* http://www.jedec.org/standards-documents/results/jesd220 or
* http://www.jedec.org/standards-documents/results/jesd223
* The documents are available free of charge, although you will need to have
* an acount.
*/
/** UFS command flow state machine
*digraph CommandFlow{
node [fontsize=10];
IDLE -> transferHandler
[ label=" transfer/task/command request " fontsize=6];
transferHandler -> command
[ label=" It is a command " fontsize=6];
command -> IDLE
[ label=" Command done, no further action " fontsize=6];
transferHandler -> taskStart
[ label=" It is a task " fontsize=6];
taskStart -> finalUTP
[ label=" Task handled, now acknowledge (UFS) " fontsize=6];
transferHandler -> transferStart
[ label=" It is a transfer " fontsize=6];
transferStart -> SCSIResume
[ label=" Transfer, obtain the specific command " fontsize=6];
SCSIResume -> DiskDataFlowPhase
[ label=" Disk data transfer (see other graphs) " fontsize=6];
SCSIResume -> DeviceDataPhase
[ label=" Device info transfer (handled in SCSIResume) "
fontsize=6];
DiskDataFlowPhase -> transferDone
[ label=" Transfer done, acknowledge SCSI command " fontsize=6];
DeviceDataPhase -> transferDone
[ label=" Transfer done, acknowledge SCSI command " fontsize=6];
transferDone -> finalUTP
[ label=" Transfer handled, now acknowledge (UFS) " fontsize=6];
finalUTP -> readDone
[ label=" All handled, clear data structures " fontsize=6];
readDone -> IDLE
[ label=" All handled, nothing outstanding " fontsize=6];
readDone -> transferHandler
[ label=" All handled, handle next outstanding " fontsize=6];
}
*/
/** UFS read transaction flow state machine
digraph readFlow{
node [fontsize=10];
getScatterGather -> commitReadFromDisk
[ label=" Put the information about the data transfer to the disk "
fontsize=6];
commitReadFromDisk -> waitForReads
[ label=" Push the reads to the flashmodel and wait for callbacks "
fontsize=6];
waitForReads -> pushToDMA
[ label=" Push to the DMA and wait for them to finish " fontsize=6];
pushToDMA -> waitForReads
[ label=" Wait for the next disk event " fontsize=6];
pushToDMA -> waitForDMA
[ label=" Wait for the last DMA transfer to finish " fontsize=6];
waitForDMA -> finishTransfer
[ label=" Continue with the command flow " fontsize=6];
}
*/
/** UFS write transaction flow state machine
digraph WriteFlow{
node [fontsize=10];
getScatterGather -> getFromDMA
[ label=" Put the transfer information to the DMA " fontsize=6];
getFromDMA -> waitForDMA
[ label=" Wait for dma actions to arrive " fontsize=6];
waitForDMA -> pushToDisk
[ label=" Push arrived DMA to disk " fontsize=6];
pushToDisk -> waitForDMA
[ label=" Wait for next DMA action " fontsize=6];
pushToDisk -> waitForDisk
[ label=" All DMA actions are done, wait for disk " fontsize=6];
waitForDisk -> finishTransfer
[ label=" All transactions are done , continue the command flow "
fontsize=6];
}
*/
#ifndef __DEV_ARM_UFS_DEVICE_HH__
#define __DEV_ARM_UFS_DEVICE_HH__
#include <deque>
#include <functional>
#include "base/addr_range.hh"
#include "base/bitfield.hh"
#include "base/statistics.hh"
#include "debug/UFSHostDevice.hh"
#include "dev/arm/abstract_nvm.hh"
#include "dev/arm/base_gic.hh"
#include "dev/storage/disk_image.hh"
#include "dev/dma_device.hh"
#include "dev/io_device.hh"
#include "mem/packet.hh"
#include "mem/packet_access.hh"
#include "params/UFSHostDevice.hh"
#include "sim/serialize.hh"
#include "sim/stats.hh"
namespace gem5
{
/**
* Host controller layer: This is your Host controller
* This layer handles the UFS functionality.
* It tracks all the different transaction stages and uses
* the device layer and the flash layer to determine the transaction flow.
*/
class UFSHostDevice : public DmaDevice
{
public:
UFSHostDevice(const UFSHostDeviceParams &p);
DrainState drain() override;
void checkDrain();
void serialize(CheckpointOut &cp) const override;
void unserialize(CheckpointIn &cp) override;
private:
/**
* Host Controller Interface
* This is a set of registers that allow the driver to control the
* transactions to the flash devices.
* As defined in:
* http://www.jedec.org/standards-documents/results/jesd223
*/
struct HCIMem
{
/**
* Specify the host capabilities
*/
uint32_t HCCAP;
uint32_t HCversion;
uint32_t HCHCDDID;
uint32_t HCHCPMID;
/**
* Operation and runtime registers
*/
uint32_t ORInterruptStatus;
uint32_t ORInterruptEnable;
uint32_t ORHostControllerStatus;
uint32_t ORHostControllerEnable;
uint32_t ORUECPA;
uint32_t ORUECDL;
uint32_t ORUECN;
uint32_t ORUECT;
uint32_t ORUECDME;
uint32_t ORUTRIACR;
/**
* vendor specific register
*/
uint32_t vendorSpecific;
/**
* Transfer control registers
*/
uint32_t TRUTRLBA;
uint32_t TRUTRLBAU;
uint32_t TRUTRLDBR;
uint32_t TRUTRLCLR;
uint32_t TRUTRLRSR;
/**
* Task control registers
*/
uint32_t TMUTMRLBA;
uint32_t TMUTMRLBAU;
uint32_t TMUTMRLDBR;
uint32_t TMUTMRLCLR;
uint32_t TMUTMRLRSR;
/**
* Command registers
*/
uint32_t CMDUICCMDR;
uint32_t CMDUCMDARG1;
uint32_t CMDUCMDARG2;
uint32_t CMDUCMDARG3;
};
/**
* All the data structures are defined in the UFS standard
* This standard be found at the JEDEC website free of charge
* (login required):
* http://www.jedec.org/standards-documents/results/jesd220
*/
/**
* struct UTPUPIUHeader - UPIU header structure
* dWord0: UPIU header DW-0
* dWord1: UPIU header DW-1
* dWord2: UPIU header DW-2
*/
struct UTPUPIUHeader
{
uint32_t dWord0;
uint32_t dWord1;
uint32_t dWord2;
};
/**
* struct UTPUPIURSP - Response UPIU structure
* header: UPIU header DW-0 to DW-2
* residualTransferCount: Residual transfer count DW-3
* reserved: Reserved DW-4 to DW-7
* senseDataLen: Sense data length DW-8 U16
* senseData: Sense data field DW-8 to DW-12
*/
struct UTPUPIURSP
{
struct UTPUPIUHeader header;
uint32_t residualTransferCount;
uint32_t reserved[4];
uint16_t senseDataLen;
uint8_t senseData[18];
};
/**
* struct UTPUPIUTaskReq - Task request UPIU structure
* header - UPIU header structure DW0 to DW-2
* inputParam1: Input param 1 DW-3
* inputParam2: Input param 2 DW-4
* inputParam3: Input param 3 DW-5
* reserved: Reserver DW-6 to DW-7
*/
struct UTPUPIUTaskReq
{
struct UTPUPIUHeader header;
uint32_t inputParam1;
uint32_t inputParam2;
uint32_t inputParam3;
uint32_t reserved[2];
};
/**
* struct UFSHCDSGEntry - UFSHCI PRD Entry
* baseAddr: Lower 32bit physical address DW-0
* upperAddr: Upper 32bit physical address DW-1
* reserved: Reserved for future use DW-2
* size: size of physical segment DW-3
*/
struct UFSHCDSGEntry
{
uint32_t baseAddr;
uint32_t upperAddr;
uint32_t reserved;
uint32_t size;
};
/**
* struct UTPTransferCMDDesc - UFS Commad Descriptor structure
* commandUPIU: Command UPIU Frame address
* responseUPIU: Response UPIU Frame address
* PRDTable: Physcial Region Descriptor
* All lengths as defined by JEDEC220
*/
struct UTPTransferCMDDesc
{
uint8_t commandUPIU[128];
uint8_t responseUPIU[128];
struct UFSHCDSGEntry PRDTable[128];
};
/**
* UPIU tranfer message.
*/
struct UPIUMessage
{
struct UTPUPIUHeader header;
uint32_t dataOffset;
uint32_t dataCount;
std::vector<uint32_t> dataMsg;
};
/**
* struct UTPTransferReqDesc - UTRD structure
* header: UTRD header DW-0 to DW-3
* commandDescBaseAddrLo: UCD base address low DW-4
* commandDescBaseAddrHi: UCD base address high DW-5
* responseUPIULength: response UPIU length DW-6
* responseUPIUOffset: response UPIU offset DW-6
* PRDTableLength: Physical region descriptor length DW-7
* PRDTableOffset: Physical region descriptor offset DW-7
*/
struct UTPTransferReqDesc
{
/**
* struct RequestDescHeader
* dword0: Descriptor Header DW0
* dword1: Descriptor Header DW1
* dword2: Descriptor Header DW2
* dword3: Descriptor Header DW3
*/
struct RequestDescHeader
{
uint32_t dWord0;
uint32_t dWord1;
uint32_t dWord2;
uint32_t dWord3;
} header;
/* DW 4-5*/
uint32_t commandDescBaseAddrLo;
uint32_t commandDescBaseAddrHi;
/* DW 6 */
uint16_t responseUPIULength;
uint16_t responseUPIUOffset;
/* DW 7 */
uint16_t PRDTableLength;
uint16_t PRDTableOffset;
};
/**
* SCSI reply structure. In here is all the information that is needed to
* build a SCSI reply.
*/
struct SCSIReply
{
void reset() {
memset(static_cast<void*>(this), 0, sizeof(*this));
}
uint8_t status;
uint32_t msgSize;
uint8_t LUN;
struct UPIUMessage message;
uint8_t senseSize;
uint8_t expectMore;//0x01 is for writes, 0x02 is for reads
uint64_t offset;
uint8_t senseCode[19];
};
/**
* Logic unit information structure. SCSI requires information of each LUN.
* This structure is defined in the SCSI standard, and can also be found in
* the UFS standard. http://www.jedec.org/standards-documents/results/jesd220
*/
struct LUNInfo
{
uint32_t dWord0;
uint32_t dWord1;
uint32_t vendor0;
uint32_t vendor1;
uint32_t product0;
uint32_t product1;
uint32_t product2;
uint32_t product3;
uint32_t productRevision;
};
/**
* Different events, and scenarios require different types of information.
* Keep in mind that for a read-from-disk transaction the host at first a
* datastructure fetches to determine where and what the command is, then the
* command fetches and the structure fetches to determine where the
* different read transactions should be placed and then transfers all the
* read fragments. It then answers to the original caller with two replies,
* one for the command, and one for UFS. Each of these stages trigger a
* different event, and each event needs to know what happened in the
* previous stage and what is going to happen in the current one. This
* happens also for writes, SCSI maintanance, UFS maintanance, command
* management and task management.
*/
/**
* Transfer information.
* @filePointer this does not point to a file, but to a position on the disk
* image (which is from the software systems perspective a position in a file)
*/
struct transferInfo
{
std::vector <uint8_t> buffer;
uint32_t size;
uint64_t offset;
uint32_t filePointer;
uint32_t lunID;
};
/**
* transfer completion info.
* This information is needed by transferDone to finish the transfer.
*/
struct transferDoneInfo
{
Addr responseStartAddr;
uint32_t reqPos;
struct UTPUPIURSP requestOut;
uint32_t size;
Addr address;
uint8_t *destination;
bool finished;
uint32_t lunID;
};
/**
* Transfer start information.
*/
struct transferStart
{
struct UTPTransferReqDesc* destination;
uint32_t mask;
Addr address;
uint32_t size;
uint32_t done;
uint32_t lun_id;
};
/**
* Task start information. This is for the device, so no lun id needed.
*/
struct taskStart
{
struct UTPUPIUTaskReq destination;
uint32_t mask;
Addr address;
uint32_t size;
bool done;
};
/**
* After a SCSI command has been identified, the SCSI resume function will
* handle it. This information will provide context information.
*/
struct SCSIResumeInfo
{
struct UTPTransferReqDesc* RequestIn;
int reqPos;
Addr finalAddress;
uint32_t finalSize;
std::vector <uint8_t> destination;
uint32_t done;
};
/**
* Disk transfer burst information. Needed to allow communication between the
* disk transactions and dma transactions.
*/
struct writeToDiskBurst
{
Addr start;
uint64_t SCSIDiskOffset;
uint32_t size;
uint32_t LUN;
};
/**
* Statistics
*/
struct UFSHostDeviceStats : public statistics::Group
{
UFSHostDeviceStats(UFSHostDevice *parent);
/** Queue lengths */
statistics::Scalar currentSCSIQueue;
statistics::Scalar currentReadSSDQueue;
statistics::Scalar currentWriteSSDQueue;
/** Amount of data read/written */
statistics::Scalar totalReadSSD;
statistics::Scalar totalWrittenSSD;
statistics::Scalar totalReadDiskTransactions;
statistics::Scalar totalWriteDiskTransactions;
statistics::Scalar totalReadUFSTransactions;
statistics::Scalar totalWriteUFSTransactions;
/** Average bandwidth for reads and writes */
statistics::Formula averageReadSSDBW;
statistics::Formula averageWriteSSDBW;
/** Average Queue lengths*/
statistics::Average averageSCSIQueue;
statistics::Average averageReadSSDQueue;
statistics::Average averageWriteSSDQueue;
/** Number of doorbells rung*/
statistics::Formula curDoorbell;
statistics::Scalar maxDoorbell;
statistics::Average averageDoorbell;
/** Histogram of latencies*/
statistics::Histogram transactionLatency;
statistics::Histogram idleTimes;
};
/**
* device layer: This is your Logic unit
* This layer implements the SCSI functionality of the UFS Device
* One logic unit controls one or more disk partitions
*/
class UFSSCSIDevice: SimObject
{
public:
using Callback = std::function<void()>;
/**
* Constructor and destructor
*/
UFSSCSIDevice(const UFSHostDeviceParams &p, uint32_t lun_id,
const Callback &transfer_cb, const Callback &read_cb);
~UFSSCSIDevice();
/**
* SCSI command handle function; determines what the command is and
* returns a reply structure that allows the host device to continue
* with the transfer.
*/
struct SCSIReply SCSICMDHandle(uint32_t* SCSI_msg);
/**
* Disk access functions. These will transfer the data from/to the disk
*/
/**
* Read flash. read the data from the disk image. This function
* doesn't model timing behaviour
*/
void readFlash(uint8_t* readaddr, uint64_t offset, uint32_t size);
/**
* Write flash. write the data to the disk image. This function
* doesn't model timing behaviour
*/
void writeFlash(uint8_t* writeaddr, uint64_t offset, uint32_t size);
/**
* finished command. Probe to find out wether this logic unit
* finished its transfer and triggered the callback; The host needs
* this to handle the final part of the transaction.
*/
bool finishedCommand() const {return transferCompleted;};
/**
* Clear signal. Handle for the host to clear the transfer complete
* signal.
*/
void clearSignal() {transferCompleted = false;};
/**
* Finished read. Probe to find out which logic unit finished its
* read. This is needed, because multiple units can do transactions
* at the same time, and need to push back data at the right time in
* the right order. (because writes work the other way round, they do
* not need this mechanism)
*/
bool finishedRead() const {return readCompleted;};
/**
* Clear signal. Handle for the host to clear the read complete
* signal.
*/
void clearReadSignal() {readCompleted = false;};
/**
* Start the transactions to (and from) the disk
* The host will queue all the transactions. Once the next phase
* commences, this function should be started.
*/
void SSDReadStart(uint32_t total_read);
void SSDWriteStart();
/**
* Sets total amount of write transactions that needs to be made.
* First they need to be fetched via DMA, so this value is needed in
* a later stage.
*/
void setTotalWrite(uint32_t total_write) {totalWrite = total_write;};
/**
* End of transfer information
*/
transferDoneInfo transferInfo;
/**
* Information message queues, as there can be multiple messages
* queued for handling in this system. These are the main
* communication interfaces between the Host and the device layers
*/
/**
* SCSIInfoQueue: each LU handles its own SCSI commands.
*/
std::deque<struct SCSIResumeInfo> SCSIInfoQueue;
/**
* SSDReadInfo: Structure from disk to dma, that contains data, and
* helper info to get it to the right place in the memory.
*/
std::deque<struct transferInfo> SSDReadInfo;
/**
* SSDWriteDoneInfo: Structure from dma to disk, that contains data,
* and helper info to get it to the right place in the memory.
* The done is added because it is going to the last phase of the
* write transfer.
*/
std::deque<struct transferInfo> SSDWriteDoneInfo;
private:
/**
* Functions to indicate that the action to the SSD has completed.
*/
/**
* Read Call back; This is the callback function for the memory model
*/
void readCallback();
/**
* SSD Read done; Determines if the final callback of the transaction
* should be made at the end of a read transfer.
*/
void SSDReadDone();
/**
* SSD Write Done; This is the callback function for the memory model.
*/
void SSDWriteDone();
/**
* Status of SCSI. This may be linked to a status check in the future.
* For now it (mainly) fills a data structure with sense information
* for a successfull transaction
*/
void statusCheck(uint8_t status, uint8_t* sensecodelist);
/**
* set signal to indicate that the transaction has been completed.
*/
void setSignal() {transferCompleted = true;};
/**
* set signal to indicate that the read action has been completed
*/
void setReadSignal() {readCompleted = true;};
/**
* The objects this model links to.
* 1: the disk data model
* 2: the memory timing model
*/
DiskImage* flashDisk;
AbstractNVM* flashDevice;
/**
* Logic unit dimensions
*/
const uint32_t blkSize;
const uint32_t lunAvail;
const uint64_t diskSize;
const uint32_t capacityLower;
const uint32_t capacityUpper;
/**
* Logic unit info; needed for SCSI Info messages and LU
* identification
*/
struct LUNInfo lunInfo;
const uint32_t lunID;
/**
* Signals to Host layer
* 1: signal for transaction completion
* 2: signal for read action completion
*/
bool transferCompleted;
bool readCompleted;
/**
* Total amount transactions that need to be made
*/
uint32_t totalRead;
uint32_t totalWrite;
/**
* transaction progress tracking
*/
uint32_t amountOfWriteTransfers;
uint32_t amountOfReadTransfers;
/**
* Callbacks between Host and Device
*/
Callback signalDone;
Callback deviceReadCallback;
/**
* Callbacks between Device and Memory
*/
Callback memReadCallback;
Callback memWriteCallback;
/*
* Default response header layout. For more information refer to
* chapter 7 http://www.jedec.org/standards-documents/results/jesd220
*/
static const unsigned int UPIUHeaderDataIndWord0 = 0x0000C022;
static const unsigned int UPIUHeaderDataIndWord1 = 0x00000000;
static const unsigned int UPIUHeaderDataIndWord2 = 0x40000000;
/*
* SCSI mode pages values assigned in ufs_device.cc
* The mode pages give device specific information via the SCSI
* protocol. They are defined in
* http://www.jedec.org/standards-documents/results/jesd220
*/
static const unsigned int controlPage[3];
static const unsigned int recoveryPage[3];
static const unsigned int cachingPage[5];
/*
* SCSI command set; defined in
* http://www.jedec.org/standards-documents/results/jesd220
*/
enum SCSICommandSet
{
SCSIInquiry = 0x12,
SCSIRead6 = 0x08,
SCSIRead10 = 0x28,
SCSIRead16 = 0x88,
SCSIReadCapacity10 = 0x25,
SCSIReadCapacity16 = 0x9E,
SCSIReportLUNs = 0xA0,
SCSIStartStop = 0x1B,
SCSITestUnitReady = 0x00,
SCSIVerify10 = 0x2F,
SCSIWrite6 = 0x0A,
SCSIWrite10 = 0x2A,
SCSIWrite16 = 0x8A,
SCSIFormatUnit = 0x04,
SCSISendDiagnostic = 0x1D,
SCSISynchronizeCache = 0x35,
//UFS SCSI additional command set for full functionality
SCSIModeSelect10 = 0x55,
SCSIModeSense6 = 0x1A,
SCSIModeSense10 = 0x5A,
SCSIRequestSense = 0x03,
SCSIUnmap = 0x42,
SCSIWriteBuffer = 0x3B,
SCSIReadBuffer = 0x3C,
//SCSI commands not supported by UFS; but Linux send them anyway
SCSIMaintenanceIn = 0xA3
};
/*
* SCSI status codes; defined in
* http://www.jedec.org/standards-documents/results/jesd220
*/
enum SCSIStatusCodes
{
SCSIGood = 0x00,
SCSICheckCondition = 0x02,
SCSIConditionGood = 0x04,
SCSIBusy = 0x08,
SCSIIntermediateGood = 0x10,
SCSIIntermediatCGood = 0x14,
SCSIReservationConflict = 0x18,
SCSICommandTerminated = 0x22,
SCSITaskSetFull = 0x28,
SCSIACAActive = 0x30,
SCSITaskAborted = 0x40
};
/*
* SCSI sense codes; defined in
* http://www.jedec.org/standards-documents/results/jesd220
*/
enum SCSISenseCodes
{
SCSINoSense = 0x00,
SCSIRecoverdError = 0x01,
SCSINotReady = 0x02,
SCSIMediumError = 0x03,
SCSIHardwareError = 0x04,
SCSIIllegalRequest = 0x05,
SCSIUnitAttention = 0x06,
SCSIDataProtect = 0x07,
SCSIBlankCheck = 0x08,
SCSIAbortedCommand = 0x0B,
SCSIVolumeOverflow = 0x0D,
SCSIMisCompare = 0x0E
};
};
//All access functions are inherrited; no need to make them public
/**
* Address range functions
*/
AddrRangeList getAddrRanges() const override;
/**
* register access functions
*/
Tick read(PacketPtr pkt) override;
Tick write(PacketPtr pkt) override;
// end of access functions
/**
* Initialization function. Sets the sefault HCI register values
*/
void setValues();
/**
* Handler functions. Each function handles a different stage of the
* transfer. Note that the UFS protocol specifies three types of messages
* to the host (and devices):
* 1: Command (to Host specifically)
* 2: Task (to device; to control flow, not for data)
* 3: Transfer (to device; to transfer data)
*/
/**
* request handler. This function finds the cause of the request and
* triggers the right follow-up action (command handler, task handler,
* or transferhandler)
*/
void requestHandler();
/**
* Command handler function. Handles the command send to the Host
* controller
*/
void commandHandler();
/**
* Task Start function. Starts the task handler once the task data
* structure has arrived
*/
void taskStart();
/**
* Task handler function. Handles the tasks send to the devices
* because there are not many tasks implemented yet this is kept in the
* Host controller layer
*/
void taskHandler(struct UTPUPIUTaskReq* request_in,
uint32_t req_pos, Addr finaladdress, uint32_t finalsize);
/**
* Transfer Start function. Starts the transfer handler once the transfer
* data structure has arrived
*/
void transferStart();
/**
* Transfer handler function. Handles the transfers send to the devices
* Important to understand here is that a Logic unit is not a device (a
* device can contain multiple logic units). This function analyses the
* first data structure that has been transfered. Which will tell the
* host to expect SCSI frames for the rest of the transaction. Note that
* the host has no indication whatsoever which LU to address. That will
* follow in the next transaction.
*/
void transferHandler(struct UTPTransferReqDesc*
request_in, int req_pos, Addr finaladdress,
uint32_t finalsize, uint32_t done);
/**
* Transfer SCSI function. Determines which Logic unit to address and
* starts the SCSI resume function
*/
void SCSIStart();
/**
* Starts the scsi handling function in the apropriate Logic unit,
* prepares the right data transfer scheme and kicks it off.
*/
void SCSIResume(uint32_t lun_id);
/**
* LU callback function to indicate that the action has completed.
*/
void LUNSignal();
/**
* transfer done, the beginning of the final stage of the transfer.
* Acknowledges UPIU frame and prepares the UTP response frame
*/
void transferDone(Addr responseStartAddr, uint32_t req_pos,
struct UTPUPIURSP request_out, uint32_t size,
Addr address, uint8_t* destination, bool finished,
uint32_t lun_id);
/**
* final UTP, sends the last acknowledge data structure to the system;
* prepares the clean up functions.
*/
void finalUTP();
/**
* Interrupt control functions
*/
void clearInterrupt();
void generateInterrupt();
/**
* DMA transfer functions
* These allow the host to push/pull the data to the memory
* The provided event indicates what the next phase it that will handle
* the obtained data, or what the follow up action is once the data has
* been pushed to the memory
*/
void writeDevice(Event* additional_action, bool toDisk, Addr start,
int size, uint8_t* destination, uint64_t SCSIDiskOffset,
uint32_t lun_id);
void readDevice(bool lastTransfer, Addr SCSIStart, uint32_t SCSISize,
uint8_t* SCSIDestination, bool no_cache,
Event* additional_action);
/**
* Disk transfer management functions
* these set up the queues, and initiated them, leading to the data
* transaction timing model based on the scatter gather list constructed
* in SCSIresume.
*/
void manageWriteTransfer(uint8_t LUN, uint64_t offset, uint32_t
sg_table_length, struct UFSHCDSGEntry* sglist);
void manageReadTransfer(uint32_t size, uint32_t LUN, uint64_t offset,
uint32_t sg_table_length,
struct UFSHCDSGEntry* sglist);
/**
* Read done
* Started at the end of a transaction after the last read action. Cleans
* up UTP descriptor and other remaining data structures. It also raises
* the interrupt.
*/
void readDone();
/**
* Write done
* After a DMA write with data intended for the disk, this function is
* called. It ensures that the disk image is modified, and that the
* correct timing function is triggered.
*/
void writeDone();
/**
* Read callback
* Call back function for the logic units to indicate the completion of
* a read action. Note that this is needed because the read functionality
* needs to push data structures back to the memory.
*/
void readCallback();
/**
* Read garbage
* A read from disk data structure can vary in size and is therefor
* allocated on creation. It can only be destroyed once that particular
* read action has completed. This function is called on completion of a
* read from disk action to handle this.
*/
void readGarbage();
/**
* Host controller information
*/
const Addr pioAddr;
const Addr pioSize;
const Tick pioDelay;
const int intNum;
BaseGic* gic;
const uint32_t lunAvail;
const uint8_t UFSSlots;
/**
* Host controller memory
*/
HCIMem UFSHCIMem;
/**
* Track number of DMA transactions in progress
*/
int readPendingNum;
int writePendingNum;
/**
* Statistics helper variables
* Active doorbells indicates how many doorbells are in teh process of
* being handled.
* Pending doorbells have been handled and are waiting to be acknowledged
* by the host system.
* The doorbell register is 32 bits wide, so one byte is enough to keep
* track of the numbers
*/
uint8_t activeDoorbells;
uint8_t pendingDoorbells;
/**
* interrupt verification
* This keeps track of the number of interrupts generated. It is usefull
* for debug purposes. Make sure that the implemented driver prints the
* number of interrupts it has handled so far to fully benefit from this
* feature.
*/
uint32_t countInt;
/**
* Track the transfer
* This is allows the driver to "group" certain transfers together by
* using a tag in the UPIU. The messages with the same tag should be
* handled together, i.e. their doorbells should be cleared when they are
* all done. but we need to keep track of the ones we already handled,
* this integer shadows the doorbells to allow this behaviour.
*/
uint32_t transferTrack;
uint32_t taskCommandTrack;
/**
* Helper for latency stats
* These variables keep track of the latency for every doorbell.
* Eventually the latenmcies will be put in a histogram.
*/
Tick transactionStart[32];
Tick idlePhaseStart;
/**
* logic units connected to the UFS Host device
* Note again that the "device" as such is represented by one or multiple
* logic units.
*/
std::vector<UFSSCSIDevice*> UFSDevice;
/**
* SCSI reply structure, used for direct answering. Might be refered to
* during the assembly of the reply (data, and response; e.g. if
* something goes wrong along the way, the reply will be different)
*/
struct SCSIReply request_out_datain;
/**
* SCSI resume info
* information structure for SCSI resume. it keeps track of all the
* information that is needed to successfully complete the transaction
* (response addresses, communicated information so far, etc.).
*/
struct SCSIResumeInfo SCSIInfo;
/**
* To finish the transaction one needs information about the original
* message. This is stored in this queue
* transferEnd uses the same structure as transferStartInfo, because all
* the information it needs is in there. It improves readability in the
* cc file.
*/
std::deque<struct transferStart> transferEnd;
/**
* When a task/transfer is started it needs information about the
* task/transfer it is about to perform. This is defined in these
* structures. If multiple tasks/transfers are issued at the same time,
* they still need to be fetched one by one. They then need to be
* executed in the order specified by the UFS standard (least significant
* doorbell first). The tasks/transfers are placed in the queue in that
* specific order.
*/
std::deque<struct taskStart> taskInfo;
std::deque<struct transferStart> transferStartInfo;
/**
* Information to get a DMA transaction
*/
std::deque<struct writeToDiskBurst> dmaWriteInfo;
/**
* Information from DMA transaction to disk
*/
std::deque<struct transferInfo> SSDWriteinfo;
/**
* Information from the Disk, waiting to be pushed to the DMA
*/
std::deque<struct transferInfo> SSDReadPending;
/**
* garbage queue, ensure clearing of the allocated memory
*/
std::deque<struct UTPTransferReqDesc*> garbage;
/**
* RequestHandler stats
*/
struct UFSHostDeviceStats stats;
/**
* Transfer flow events
* Basically these events form two queues, one from memory to UFS device
* (DMA) and one from device to flash (SSD). The SSD "queue" is
* maintained by the flash and the lun classes and does not form a queue
* of events as such, but rather a queue of information. This can be done
* because the flow of the events is completely in the control of these
* classes. (Whereas in the DMA case we rely on an external class)
*/
std::deque<EventFunctionWrapper> readDoneEvent;
std::deque<EventFunctionWrapper> writeDoneEvent;
/**
* The events that control the functionality.
* After a doorbell has been set, either a taskevent or a transfer event
* is scheduled. A transfer event might schedule a SCSI event, all events
* sequences end with an UTP event, which can be considered as the event
* which answers the doorbell.
*/
/**
* Wait for the SCSI specific data to arive
*/
EventFunctionWrapper SCSIResumeEvent;
/**
* Wait for the moment where we can send the last frame
*/
EventFunctionWrapper UTPEvent;
/**
* Event after a read to clean up the UTP data structures
*/
std::deque<EventFunctionWrapper> readGarbageEventQueue;
/**
* Multiple tasks transfers can be scheduled at once for the device, the
* only thing we know for sure about them is that they will happen in a
* first come first serve order; hence we need to queue.
*/
std::deque<EventFunctionWrapper> taskEventQueue;
std::deque<EventFunctionWrapper> transferEventQueue;
/**
* Bits of interest within UFS data packages
*/
static const unsigned int UTPTransferREQCOMPL = 0x01;//UFS_BIT(0)
static const unsigned int UTPTaskREQCOMPL = 0x200;//UFS_BIT(9)
static const unsigned int UICCommandCOMPL = 0x400;//UFS_BIT(10)
static const unsigned int UICCommandReady = 0x08;//UFS_BIT(3)
/*
* UFSHCI Registers; please refer to
* http://www.jedec.org/standards-documents/results/jesd223
* for their definition.
*/
enum UFSHCIRegisters
{
regControllerCapabilities = 0x00,
regUFSVersion = 0x08,
regControllerDEVID = 0x10,
regControllerPRODID = 0x14,
regInterruptStatus = 0x20,
regInterruptEnable = 0x24,
regControllerStatus = 0x30,
regControllerEnable = 0x34,
regUICErrorCodePHYAdapterLayer = 0x38,
regUICErrorCodeDataLinkLayer = 0x3C,
regUICErrorCodeNetworkLayer = 0x40,
regUICErrorCodeTransportLayer = 0x44,
regUICErrorCodeDME = 0x48,
regUTPTransferREQINTAGGControl = 0x4C,
regUTPTransferREQListBaseL = 0x50,
regUTPTransferREQListBaseH = 0x54,
regUTPTransferREQDoorbell = 0x58,
regUTPTransferREQListClear = 0x5C,
regUTPTransferREQListRunStop = 0x60,
regUTPTaskREQListBaseL = 0x70,
regUTPTaskREQListBaseH = 0x74,
regUTPTaskREQDoorbell = 0x78,
regUTPTaskREQListClear = 0x7C,
regUTPTaskREQListRunStop = 0x80,
regUICCommand = 0x90,
regUICCommandArg1 = 0x94,
regUICCommandArg2 = 0x98,
regUICCommandArg3 = 0x9C
};
};
} // namespace gem5
#endif //__DEV_ARM_UFS_DEVICE_HH__