| /* |
| * Copyright (c) 2015-2016 ARM Limited |
| * All rights reserved |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /* @file |
| * The interface class for dist-gem5 simulations. |
| */ |
| |
| #include "dev/net/dist_iface.hh" |
| |
| #include <queue> |
| #include <thread> |
| |
| #include "base/random.hh" |
| #include "base/trace.hh" |
| #include "cpu/thread_context.hh" |
| #include "debug/DistEthernet.hh" |
| #include "debug/DistEthernetPkt.hh" |
| #include "dev/net/etherpkt.hh" |
| #include "sim/sim_exit.hh" |
| #include "sim/sim_object.hh" |
| #include "sim/system.hh" |
| |
| using namespace std; |
| DistIface::Sync *DistIface::sync = nullptr; |
| System *DistIface::sys = nullptr; |
| DistIface::SyncEvent *DistIface::syncEvent = nullptr; |
| unsigned DistIface::distIfaceNum = 0; |
| unsigned DistIface::recvThreadsNum = 0; |
| DistIface *DistIface::master = nullptr; |
| bool DistIface::isSwitch = false; |
| |
| void |
| DistIface::Sync::init(Tick start_tick, Tick repeat_tick) |
| { |
| if (start_tick < nextAt) { |
| nextAt = start_tick; |
| inform("Next dist synchronisation tick is changed to %lu.\n", nextAt); |
| } |
| |
| if (repeat_tick == 0) |
| panic("Dist synchronisation interval must be greater than zero"); |
| |
| if (repeat_tick < nextRepeat) { |
| nextRepeat = repeat_tick; |
| inform("Dist synchronisation interval is changed to %lu.\n", |
| nextRepeat); |
| } |
| } |
| |
| void |
| DistIface::Sync::abort() |
| { |
| std::unique_lock<std::mutex> sync_lock(lock); |
| waitNum = 0; |
| isAbort = true; |
| sync_lock.unlock(); |
| cv.notify_one(); |
| } |
| |
| DistIface::SyncSwitch::SyncSwitch(int num_nodes) |
| { |
| numNodes = num_nodes; |
| waitNum = num_nodes; |
| numExitReq = 0; |
| numCkptReq = 0; |
| numStopSyncReq = 0; |
| doExit = false; |
| doCkpt = false; |
| doStopSync = false; |
| nextAt = std::numeric_limits<Tick>::max(); |
| nextRepeat = std::numeric_limits<Tick>::max(); |
| isAbort = false; |
| } |
| |
| DistIface::SyncNode::SyncNode() |
| { |
| waitNum = 0; |
| needExit = ReqType::none; |
| needCkpt = ReqType::none; |
| needStopSync = ReqType::none; |
| doExit = false; |
| doCkpt = false; |
| doStopSync = false; |
| nextAt = std::numeric_limits<Tick>::max(); |
| nextRepeat = std::numeric_limits<Tick>::max(); |
| isAbort = false; |
| } |
| |
| bool |
| DistIface::SyncNode::run(bool same_tick) |
| { |
| std::unique_lock<std::mutex> sync_lock(lock); |
| Header header; |
| |
| assert(waitNum == 0); |
| assert(!isAbort); |
| waitNum = DistIface::recvThreadsNum; |
| // initiate the global synchronisation |
| header.msgType = MsgType::cmdSyncReq; |
| header.sendTick = curTick(); |
| header.syncRepeat = nextRepeat; |
| header.needCkpt = needCkpt; |
| header.needStopSync = needStopSync; |
| if (needCkpt != ReqType::none) |
| needCkpt = ReqType::pending; |
| header.needExit = needExit; |
| if (needExit != ReqType::none) |
| needExit = ReqType::pending; |
| if (needStopSync != ReqType::none) |
| needStopSync = ReqType::pending; |
| DistIface::master->sendCmd(header); |
| // now wait until all receiver threads complete the synchronisation |
| auto lf = [this]{ return waitNum == 0; }; |
| cv.wait(sync_lock, lf); |
| // global synchronisation is done. |
| assert(isAbort || !same_tick || (nextAt == curTick())); |
| return !isAbort; |
| } |
| |
| |
| bool |
| DistIface::SyncSwitch::run(bool same_tick) |
| { |
| std::unique_lock<std::mutex> sync_lock(lock); |
| Header header; |
| // Wait for the sync requests from the nodes |
| if (waitNum > 0) { |
| auto lf = [this]{ return waitNum == 0; }; |
| cv.wait(sync_lock, lf); |
| } |
| assert(waitNum == 0); |
| if (isAbort) // sync aborted |
| return false; |
| assert(!same_tick || (nextAt == curTick())); |
| waitNum = numNodes; |
| // Complete the global synchronisation |
| header.msgType = MsgType::cmdSyncAck; |
| header.sendTick = nextAt; |
| header.syncRepeat = nextRepeat; |
| if (doCkpt || numCkptReq == numNodes) { |
| doCkpt = true; |
| header.needCkpt = ReqType::immediate; |
| numCkptReq = 0; |
| } else { |
| header.needCkpt = ReqType::none; |
| } |
| if (doExit || numExitReq == numNodes) { |
| doExit = true; |
| header.needExit = ReqType::immediate; |
| } else { |
| header.needExit = ReqType::none; |
| } |
| if (doStopSync || numStopSyncReq == numNodes) { |
| doStopSync = true; |
| numStopSyncReq = 0; |
| header.needStopSync = ReqType::immediate; |
| } else { |
| header.needStopSync = ReqType::none; |
| } |
| DistIface::master->sendCmd(header); |
| return true; |
| } |
| |
| bool |
| DistIface::SyncSwitch::progress(Tick send_tick, |
| Tick sync_repeat, |
| ReqType need_ckpt, |
| ReqType need_exit, |
| ReqType need_stop_sync) |
| { |
| std::unique_lock<std::mutex> sync_lock(lock); |
| if (isAbort) // sync aborted |
| return false; |
| assert(waitNum > 0); |
| |
| if (send_tick > nextAt) |
| nextAt = send_tick; |
| if (nextRepeat > sync_repeat) |
| nextRepeat = sync_repeat; |
| |
| if (need_ckpt == ReqType::collective) |
| numCkptReq++; |
| else if (need_ckpt == ReqType::immediate) |
| doCkpt = true; |
| if (need_exit == ReqType::collective) |
| numExitReq++; |
| else if (need_exit == ReqType::immediate) |
| doExit = true; |
| if (need_stop_sync == ReqType::collective) |
| numStopSyncReq++; |
| else if (need_stop_sync == ReqType::immediate) |
| doStopSync = true; |
| |
| waitNum--; |
| // Notify the simulation thread if the on-going sync is complete |
| if (waitNum == 0) { |
| sync_lock.unlock(); |
| cv.notify_one(); |
| } |
| // The receive thread must keep alive in the switch until the node |
| // closes the connection. Thus, we always return true here. |
| return true; |
| } |
| |
| bool |
| DistIface::SyncNode::progress(Tick max_send_tick, |
| Tick next_repeat, |
| ReqType do_ckpt, |
| ReqType do_exit, |
| ReqType do_stop_sync) |
| { |
| std::unique_lock<std::mutex> sync_lock(lock); |
| if (isAbort) // sync aborted |
| return false; |
| assert(waitNum > 0); |
| |
| nextAt = max_send_tick; |
| nextRepeat = next_repeat; |
| doCkpt = (do_ckpt != ReqType::none); |
| doExit = (do_exit != ReqType::none); |
| doStopSync = (do_stop_sync != ReqType::none); |
| |
| waitNum--; |
| // Notify the simulation thread if the on-going sync is complete |
| if (waitNum == 0) { |
| sync_lock.unlock(); |
| cv.notify_one(); |
| } |
| // The receive thread must finish when simulation is about to exit |
| return !doExit; |
| } |
| |
| void |
| DistIface::SyncNode::requestCkpt(ReqType req) |
| { |
| std::lock_guard<std::mutex> sync_lock(lock); |
| assert(req != ReqType::none); |
| if (needCkpt != ReqType::none) |
| warn("Ckpt requested multiple times (req:%d)\n", static_cast<int>(req)); |
| if (needCkpt == ReqType::none || req == ReqType::immediate) |
| needCkpt = req; |
| } |
| |
| void |
| DistIface::SyncNode::requestExit(ReqType req) |
| { |
| std::lock_guard<std::mutex> sync_lock(lock); |
| assert(req != ReqType::none); |
| if (needExit != ReqType::none) |
| warn("Exit requested multiple times (req:%d)\n", static_cast<int>(req)); |
| if (needExit == ReqType::none || req == ReqType::immediate) |
| needExit = req; |
| } |
| |
| void |
| DistIface::Sync::drainComplete() |
| { |
| if (doCkpt) { |
| // The first DistIface object called this right before writing the |
| // checkpoint. We need to drain the underlying physical network here. |
| // Note that other gem5 peers may enter this barrier at different |
| // ticks due to draining. |
| run(false); |
| // Only the "first" DistIface object has to perform the sync |
| doCkpt = false; |
| } |
| } |
| |
| void |
| DistIface::SyncNode::serialize(CheckpointOut &cp) const |
| { |
| int need_exit = static_cast<int>(needExit); |
| SERIALIZE_SCALAR(need_exit); |
| } |
| |
| void |
| DistIface::SyncNode::unserialize(CheckpointIn &cp) |
| { |
| int need_exit; |
| UNSERIALIZE_SCALAR(need_exit); |
| needExit = static_cast<ReqType>(need_exit); |
| } |
| |
| void |
| DistIface::SyncSwitch::serialize(CheckpointOut &cp) const |
| { |
| SERIALIZE_SCALAR(numExitReq); |
| } |
| |
| void |
| DistIface::SyncSwitch::unserialize(CheckpointIn &cp) |
| { |
| UNSERIALIZE_SCALAR(numExitReq); |
| } |
| |
| void |
| DistIface::SyncEvent::start() |
| { |
| // Note that this may be called either from startup() or drainResume() |
| |
| // At this point, all DistIface objects has already called Sync::init() so |
| // we have a local minimum of the start tick and repeat for the periodic |
| // sync. |
| repeat = DistIface::sync->nextRepeat; |
| // Do a global barrier to agree on a common repeat value (the smallest |
| // one from all participating nodes. |
| if (!DistIface::sync->run(false)) |
| panic("DistIface::SyncEvent::start() aborted\n"); |
| |
| assert(!DistIface::sync->doCkpt); |
| assert(!DistIface::sync->doExit); |
| assert(!DistIface::sync->doStopSync); |
| assert(DistIface::sync->nextAt >= curTick()); |
| assert(DistIface::sync->nextRepeat <= repeat); |
| |
| if (curTick() == 0) |
| assert(!scheduled()); |
| |
| // Use the maximum of the current tick for all participating nodes or a |
| // user provided starting tick. |
| if (scheduled()) |
| reschedule(DistIface::sync->nextAt); |
| else |
| schedule(DistIface::sync->nextAt); |
| |
| inform("Dist sync scheduled at %lu and repeats %lu\n", when(), |
| DistIface::sync->nextRepeat); |
| } |
| |
| void |
| DistIface::SyncEvent::process() |
| { |
| // We may not start a global periodic sync while draining before taking a |
| // checkpoint. This is due to the possibility that peer gem5 processes |
| // may not hit the same periodic sync before they complete draining and |
| // that would make this periodic sync clash with sync called from |
| // DistIface::serialize() by other gem5 processes. |
| // We would need a 'distributed drain' solution to eliminate this |
| // restriction. |
| // Note that if draining was not triggered by checkpointing then we are |
| // fine since no extra global sync will happen (i.e. all peer gem5 will |
| // hit this periodic sync eventually). |
| panic_if(_draining && DistIface::sync->doCkpt, |
| "Distributed sync is hit while draining"); |
| /* |
| * Note that this is a global event so this process method will be called |
| * by only exactly one thread. |
| */ |
| /* |
| * We hold the eventq lock at this point but the receiver thread may |
| * need the lock to schedule new recv events while waiting for the |
| * dist sync to complete. |
| * Note that the other simulation threads also release their eventq |
| * locks while waiting for us due to the global event semantics. |
| */ |
| { |
| EventQueue::ScopedRelease sr(curEventQueue()); |
| // we do a global sync here that is supposed to happen at the same |
| // tick in all gem5 peers |
| if (!DistIface::sync->run(true)) |
| return; // global sync aborted |
| // global sync completed |
| } |
| if (DistIface::sync->doCkpt) |
| exitSimLoop("checkpoint"); |
| if (DistIface::sync->doExit) { |
| exitSimLoop("exit request from gem5 peers"); |
| return; |
| } |
| if (DistIface::sync->doStopSync) { |
| DistIface::sync->doStopSync = false; |
| inform("synchronization disabled at %lu\n", curTick()); |
| |
| // The switch node needs to wait for the next sync immediately. |
| if (DistIface::isSwitch) { |
| start(); |
| } else { |
| // Wake up thread contexts on non-switch nodes. |
| for (auto *tc: master->sys->threads) { |
| if (tc->status() == ThreadContext::Suspended) |
| tc->activate(); |
| else |
| warn_once("Tried to wake up thread in dist-gem5, but it " |
| "was already awake!\n"); |
| } |
| } |
| return; |
| } |
| // schedule the next periodic sync |
| repeat = DistIface::sync->nextRepeat; |
| schedule(curTick() + repeat); |
| } |
| |
| void |
| DistIface::RecvScheduler::init(Event *recv_done, Tick link_delay) |
| { |
| // This is called from the receiver thread when it starts running. The new |
| // receiver thread shares the event queue with the simulation thread |
| // (associated with the simulated Ethernet link). |
| curEventQueue(eventManager->eventQueue()); |
| |
| recvDone = recv_done; |
| linkDelay = link_delay; |
| } |
| |
| Tick |
| DistIface::RecvScheduler::calcReceiveTick(Tick send_tick, |
| Tick send_delay, |
| Tick prev_recv_tick) |
| { |
| Tick recv_tick = send_tick + send_delay + linkDelay; |
| // sanity check (we need atleast a send delay long window) |
| assert(recv_tick >= prev_recv_tick + send_delay); |
| panic_if(prev_recv_tick + send_delay > recv_tick, |
| "Receive window is smaller than send delay"); |
| panic_if(recv_tick <= curTick(), |
| "Simulators out of sync - missed packet receive by %llu ticks" |
| "(rev_recv_tick: %lu send_tick: %lu send_delay: %lu " |
| "linkDelay: %lu )", |
| curTick() - recv_tick, prev_recv_tick, send_tick, send_delay, |
| linkDelay); |
| |
| return recv_tick; |
| } |
| |
| void |
| DistIface::RecvScheduler::resumeRecvTicks() |
| { |
| // Schedule pending packets asap in case link speed/delay changed when |
| // restoring from the checkpoint. |
| // This may be done during unserialize except that curTick() is unknown |
| // so we call this during drainResume(). |
| // If we are not restoring from a checkppint then link latency could not |
| // change so we just return. |
| if (!ckptRestore) |
| return; |
| |
| std::vector<Desc> v; |
| while (!descQueue.empty()) { |
| Desc d = descQueue.front(); |
| descQueue.pop(); |
| d.sendTick = curTick(); |
| d.sendDelay = d.packet->simLength; // assume 1 tick/byte max link speed |
| v.push_back(d); |
| } |
| |
| for (auto &d : v) |
| descQueue.push(d); |
| |
| if (recvDone->scheduled()) { |
| assert(!descQueue.empty()); |
| eventManager->reschedule(recvDone, curTick()); |
| } else { |
| assert(descQueue.empty() && v.empty()); |
| } |
| ckptRestore = false; |
| } |
| |
| void |
| DistIface::RecvScheduler::pushPacket(EthPacketPtr new_packet, |
| Tick send_tick, |
| Tick send_delay) |
| { |
| // Note : this is called from the receiver thread |
| curEventQueue()->lock(); |
| Tick recv_tick = calcReceiveTick(send_tick, send_delay, prevRecvTick); |
| |
| DPRINTF(DistEthernetPkt, "DistIface::recvScheduler::pushPacket " |
| "send_tick:%llu send_delay:%llu link_delay:%llu recv_tick:%llu\n", |
| send_tick, send_delay, linkDelay, recv_tick); |
| // Every packet must be sent and arrive in the same quantum |
| assert(send_tick > master->syncEvent->when() - |
| master->syncEvent->repeat); |
| // No packet may be scheduled for receive in the arrival quantum |
| assert(send_tick + send_delay + linkDelay > master->syncEvent->when()); |
| |
| // Now we are about to schedule a recvDone event for the new data packet. |
| // We use the same recvDone object for all incoming data packets. Packet |
| // descriptors are saved in the ordered queue. The currently scheduled |
| // packet is always on the top of the queue. |
| // NOTE: we use the event queue lock to protect the receive desc queue, |
| // too, which is accessed both by the receiver thread and the simulation |
| // thread. |
| descQueue.emplace(new_packet, send_tick, send_delay); |
| if (descQueue.size() == 1) { |
| assert(!recvDone->scheduled()); |
| eventManager->schedule(recvDone, recv_tick); |
| } else { |
| assert(recvDone->scheduled()); |
| panic_if(descQueue.front().sendTick + descQueue.front().sendDelay > recv_tick, |
| "Out of order packet received (recv_tick: %lu top(): %lu\n", |
| recv_tick, descQueue.front().sendTick + descQueue.front().sendDelay); |
| } |
| curEventQueue()->unlock(); |
| } |
| |
| EthPacketPtr |
| DistIface::RecvScheduler::popPacket() |
| { |
| // Note : this is called from the simulation thread when a receive done |
| // event is being processed for the link. We assume that the thread holds |
| // the event queue queue lock when this is called! |
| EthPacketPtr next_packet = descQueue.front().packet; |
| descQueue.pop(); |
| |
| if (descQueue.size() > 0) { |
| Tick recv_tick = calcReceiveTick(descQueue.front().sendTick, |
| descQueue.front().sendDelay, |
| curTick()); |
| eventManager->schedule(recvDone, recv_tick); |
| } |
| prevRecvTick = curTick(); |
| return next_packet; |
| } |
| |
| void |
| DistIface::RecvScheduler::Desc::serialize(CheckpointOut &cp) const |
| { |
| SERIALIZE_SCALAR(sendTick); |
| SERIALIZE_SCALAR(sendDelay); |
| packet->serialize("rxPacket", cp); |
| } |
| |
| void |
| DistIface::RecvScheduler::Desc::unserialize(CheckpointIn &cp) |
| { |
| UNSERIALIZE_SCALAR(sendTick); |
| UNSERIALIZE_SCALAR(sendDelay); |
| packet = std::make_shared<EthPacketData>(); |
| packet->unserialize("rxPacket", cp); |
| } |
| |
| void |
| DistIface::RecvScheduler::serialize(CheckpointOut &cp) const |
| { |
| SERIALIZE_SCALAR(prevRecvTick); |
| // serialize the receive desc queue |
| std::queue<Desc> tmp_queue(descQueue); |
| unsigned n_desc_queue = descQueue.size(); |
| assert(tmp_queue.size() == descQueue.size()); |
| SERIALIZE_SCALAR(n_desc_queue); |
| for (int i = 0; i < n_desc_queue; i++) { |
| tmp_queue.front().serializeSection(cp, csprintf("rxDesc_%d", i)); |
| tmp_queue.pop(); |
| } |
| assert(tmp_queue.empty()); |
| } |
| |
| void |
| DistIface::RecvScheduler::unserialize(CheckpointIn &cp) |
| { |
| assert(descQueue.size() == 0); |
| assert(!recvDone->scheduled()); |
| assert(!ckptRestore); |
| |
| UNSERIALIZE_SCALAR(prevRecvTick); |
| // unserialize the receive desc queue |
| unsigned n_desc_queue; |
| UNSERIALIZE_SCALAR(n_desc_queue); |
| for (int i = 0; i < n_desc_queue; i++) { |
| Desc recv_desc; |
| recv_desc.unserializeSection(cp, csprintf("rxDesc_%d", i)); |
| descQueue.push(recv_desc); |
| } |
| ckptRestore = true; |
| } |
| |
| DistIface::DistIface(unsigned dist_rank, |
| unsigned dist_size, |
| Tick sync_start, |
| Tick sync_repeat, |
| EventManager *em, |
| bool use_pseudo_op, |
| bool is_switch, int num_nodes) : |
| syncStart(sync_start), syncRepeat(sync_repeat), |
| recvThread(nullptr), recvScheduler(em), syncStartOnPseudoOp(use_pseudo_op), |
| rank(dist_rank), size(dist_size) |
| { |
| DPRINTF(DistEthernet, "DistIface() ctor rank:%d\n",dist_rank); |
| isMaster = false; |
| if (master == nullptr) { |
| assert(sync == nullptr); |
| assert(syncEvent == nullptr); |
| isSwitch = is_switch; |
| if (is_switch) |
| sync = new SyncSwitch(num_nodes); |
| else |
| sync = new SyncNode(); |
| syncEvent = new SyncEvent(); |
| master = this; |
| isMaster = true; |
| } |
| distIfaceId = distIfaceNum; |
| distIfaceNum++; |
| } |
| |
| DistIface::~DistIface() |
| { |
| assert(recvThread); |
| recvThread->join(); |
| delete recvThread; |
| if (distIfaceNum-- == 0) { |
| assert(syncEvent); |
| delete syncEvent; |
| assert(sync); |
| delete sync; |
| } |
| if (this == master) |
| master = nullptr; |
| } |
| |
| void |
| DistIface::packetOut(EthPacketPtr pkt, Tick send_delay) |
| { |
| Header header; |
| |
| // Prepare a dist header packet for the Ethernet packet we want to |
| // send out. |
| header.msgType = MsgType::dataDescriptor; |
| header.sendTick = curTick(); |
| header.sendDelay = send_delay; |
| |
| header.dataPacketLength = pkt->length; |
| header.simLength = pkt->simLength; |
| |
| // Send out the packet and the meta info. |
| sendPacket(header, pkt); |
| |
| DPRINTF(DistEthernetPkt, |
| "DistIface::sendDataPacket() done size:%d send_delay:%llu\n", |
| pkt->length, send_delay); |
| } |
| |
| void |
| DistIface::recvThreadFunc(Event *recv_done, Tick link_delay) |
| { |
| EthPacketPtr new_packet; |
| DistHeaderPkt::Header header; |
| |
| // Initialize receive scheduler parameters |
| recvScheduler.init(recv_done, link_delay); |
| |
| // Main loop to wait for and process any incoming message. |
| for (;;) { |
| // recvHeader() blocks until the next dist header packet comes in. |
| if (!recvHeader(header)) { |
| // We lost connection to the peer gem5 processes most likely |
| // because one of them called m5 exit. So we stop here. |
| // Grab the eventq lock to stop the simulation thread |
| curEventQueue()->lock(); |
| exitSimLoop("connection to gem5 peer got closed"); |
| curEventQueue()->unlock(); |
| // The simulation thread may be blocked in processing an on-going |
| // global synchronisation. Abort the sync to give the simulation |
| // thread a chance to make progress and process the exit event. |
| sync->abort(); |
| // Finish receiver thread |
| break; |
| } |
| |
| // We got a valid dist header packet, let's process it |
| if (header.msgType == MsgType::dataDescriptor) { |
| recvPacket(header, new_packet); |
| recvScheduler.pushPacket(new_packet, |
| header.sendTick, |
| header.sendDelay); |
| } else { |
| // everything else must be synchronisation related command |
| if (!sync->progress(header.sendTick, |
| header.syncRepeat, |
| header.needCkpt, |
| header.needExit, |
| header.needStopSync)) |
| // Finish receiver thread if simulation is about to exit |
| break; |
| } |
| } |
| } |
| |
| void |
| DistIface::spawnRecvThread(const Event *recv_done, Tick link_delay) |
| { |
| assert(recvThread == nullptr); |
| |
| recvThread = new std::thread(&DistIface::recvThreadFunc, |
| this, |
| const_cast<Event *>(recv_done), |
| link_delay); |
| recvThreadsNum++; |
| } |
| |
| DrainState |
| DistIface::drain() |
| { |
| DPRINTF(DistEthernet,"DistIFace::drain() called\n"); |
| // This can be called multiple times in the same drain cycle. |
| if (this == master) |
| syncEvent->draining(true); |
| return DrainState::Drained; |
| } |
| |
| void |
| DistIface::drainResume() { |
| DPRINTF(DistEthernet,"DistIFace::drainResume() called\n"); |
| if (this == master) |
| syncEvent->draining(false); |
| recvScheduler.resumeRecvTicks(); |
| } |
| |
| void |
| DistIface::serialize(CheckpointOut &cp) const |
| { |
| // Drain the dist interface before the checkpoint is taken. We cannot call |
| // this as part of the normal drain cycle because this dist sync has to be |
| // called exactly once after the system is fully drained. |
| sync->drainComplete(); |
| |
| unsigned rank_orig = rank, dist_iface_id_orig = distIfaceId; |
| |
| SERIALIZE_SCALAR(rank_orig); |
| SERIALIZE_SCALAR(dist_iface_id_orig); |
| |
| recvScheduler.serializeSection(cp, "recvScheduler"); |
| if (this == master) { |
| sync->serializeSection(cp, "Sync"); |
| } |
| } |
| |
| void |
| DistIface::unserialize(CheckpointIn &cp) |
| { |
| unsigned rank_orig, dist_iface_id_orig; |
| UNSERIALIZE_SCALAR(rank_orig); |
| UNSERIALIZE_SCALAR(dist_iface_id_orig); |
| |
| panic_if(rank != rank_orig, "Rank mismatch at resume (rank=%d, orig=%d)", |
| rank, rank_orig); |
| panic_if(distIfaceId != dist_iface_id_orig, "Dist iface ID mismatch " |
| "at resume (distIfaceId=%d, orig=%d)", distIfaceId, |
| dist_iface_id_orig); |
| |
| recvScheduler.unserializeSection(cp, "recvScheduler"); |
| if (this == master) { |
| sync->unserializeSection(cp, "Sync"); |
| } |
| } |
| |
| void |
| DistIface::init(const Event *done_event, Tick link_delay) |
| { |
| // Init hook for the underlaying message transport to setup/finalize |
| // communication channels |
| initTransport(); |
| |
| // Spawn a new receiver thread that will process messages |
| // coming in from peer gem5 processes. |
| // The receive thread will also schedule a (receive) doneEvent |
| // for each incoming data packet. |
| spawnRecvThread(done_event, link_delay); |
| |
| |
| // Adjust the periodic sync start and interval. Different DistIface |
| // might have different requirements. The singleton sync object |
| // will select the minimum values for both params. |
| assert(sync != nullptr); |
| sync->init(syncStart, syncRepeat); |
| |
| // Initialize the seed for random generator to avoid the same sequence |
| // in all gem5 peer processes |
| assert(master != nullptr); |
| if (this == master) |
| random_mt.init(5489 * (rank+1) + 257); |
| } |
| |
| void |
| DistIface::startup() |
| { |
| DPRINTF(DistEthernet, "DistIface::startup() started\n"); |
| // Schedule synchronization unless we are not a switch in pseudo_op mode. |
| if (this == master && (!syncStartOnPseudoOp || isSwitch)) |
| syncEvent->start(); |
| DPRINTF(DistEthernet, "DistIface::startup() done\n"); |
| } |
| |
| bool |
| DistIface::readyToCkpt(Tick delay, Tick period) |
| { |
| bool ret = true; |
| DPRINTF(DistEthernet, "DistIface::readyToCkpt() called, delay:%lu " |
| "period:%lu\n", delay, period); |
| if (master) { |
| if (delay == 0) { |
| inform("m5 checkpoint called with zero delay => triggering collaborative " |
| "checkpoint\n"); |
| sync->requestCkpt(ReqType::collective); |
| } else { |
| inform("m5 checkpoint called with non-zero delay => triggering immediate " |
| "checkpoint (at the next sync)\n"); |
| sync->requestCkpt(ReqType::immediate); |
| } |
| if (period != 0) |
| inform("Non-zero period for m5_ckpt is ignored in " |
| "distributed gem5 runs\n"); |
| ret = false; |
| } |
| return ret; |
| } |
| |
| void |
| DistIface::SyncNode::requestStopSync(ReqType req) |
| { |
| std::lock_guard<std::mutex> sync_lock(lock); |
| needStopSync = req; |
| } |
| |
| void |
| DistIface::toggleSync(ThreadContext *tc) |
| { |
| // Unforunate that we have to populate the system pointer member this way. |
| master->sys = tc->getSystemPtr(); |
| |
| // The invariant for both syncing and "unsyncing" is that all threads will |
| // stop executing intructions until the desired sync state has been reached |
| // for all nodes. This is the easiest way to prevent deadlock (in the case |
| // of "unsyncing") and causality errors (in the case of syncing). |
| if (master->syncEvent->scheduled()) { |
| inform("Request toggling syncronization off\n"); |
| master->sync->requestStopSync(ReqType::collective); |
| |
| // At this point, we have no clue when everyone will reach the sync |
| // stop point. Suspend execution of all local thread contexts. |
| // Dist-gem5 will reactivate all thread contexts when everyone has |
| // reached the sync stop point. |
| #if THE_ISA != NULL_ISA |
| for (auto *tc: master->sys->threads) { |
| if (tc->status() == ThreadContext::Active) |
| tc->quiesce(); |
| } |
| #endif |
| } else { |
| inform("Request toggling syncronization on\n"); |
| master->syncEvent->start(); |
| |
| // We need to suspend all CPUs until the sync point is reached by all |
| // nodes to prevent causality errors. We can also schedule CPU |
| // activation here, since we know exactly when the next sync will |
| // occur. |
| #if THE_ISA != NULL_ISA |
| for (auto *tc: master->sys->threads) { |
| if (tc->status() == ThreadContext::Active) |
| tc->quiesceTick(master->syncEvent->when() + 1); |
| } |
| #endif |
| } |
| } |
| |
| bool |
| DistIface::readyToExit(Tick delay) |
| { |
| bool ret = true; |
| DPRINTF(DistEthernet, "DistIface::readyToExit() called, delay:%lu\n", |
| delay); |
| if (master) { |
| // To successfully coordinate an exit, all nodes must be synchronising |
| if (!master->syncEvent->scheduled()) |
| master->syncEvent->start(); |
| |
| if (delay == 0) { |
| inform("m5 exit called with zero delay => triggering collaborative " |
| "exit\n"); |
| sync->requestExit(ReqType::collective); |
| } else { |
| inform("m5 exit called with non-zero delay => triggering immediate " |
| "exit (at the next sync)\n"); |
| sync->requestExit(ReqType::immediate); |
| } |
| ret = false; |
| } |
| return ret; |
| } |
| |
| uint64_t |
| DistIface::rankParam() |
| { |
| uint64_t val; |
| if (master) { |
| val = master->rank; |
| } else { |
| warn("Dist-rank parameter is queried in single gem5 simulation."); |
| val = 0; |
| } |
| return val; |
| } |
| |
| uint64_t |
| DistIface::sizeParam() |
| { |
| uint64_t val; |
| if (master) { |
| val = master->size; |
| } else { |
| warn("Dist-size parameter is queried in single gem5 simulation."); |
| val = 1; |
| } |
| return val; |
| } |
