| # Copyright (c) 2010 Advanced Micro Devices, Inc. |
| # All rights reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are |
| # met: redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer; |
| # redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution; |
| # neither the name of the copyright holders nor the names of its |
| # contributors may be used to endorse or promote products derived from |
| # this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| from __future__ import print_function |
| from __future__ import absolute_import |
| |
| from m5.params import * |
| from m5.objects import * |
| |
| from common import FileSystemConfig |
| |
| from topologies.BaseTopology import SimpleTopology |
| |
| # Creates a Mesh topology with 4 directories, one at each corner. |
| # One L1 (and L2, depending on the protocol) are connected to each router. |
| # XY routing is enforced (using link weights) to guarantee deadlock freedom. |
| |
| class MeshDirCorners_XY(SimpleTopology): |
| description='MeshDirCorners_XY' |
| |
| def __init__(self, controllers): |
| self.nodes = controllers |
| |
| def makeTopology(self, options, network, IntLink, ExtLink, Router): |
| nodes = self.nodes |
| |
| num_routers = options.num_cpus |
| num_rows = options.mesh_rows |
| |
| # default values for link latency and router latency. |
| # Can be over-ridden on a per link/router basis |
| link_latency = options.link_latency # used by simple and garnet |
| router_latency = options.router_latency # only used by garnet |
| |
| |
| # First determine which nodes are cache cntrls vs. dirs vs. dma |
| cache_nodes = [] |
| dir_nodes = [] |
| dma_nodes = [] |
| for node in nodes: |
| if node.type == 'L1Cache_Controller' or \ |
| node.type == 'L2Cache_Controller': |
| cache_nodes.append(node) |
| elif node.type == 'Directory_Controller': |
| dir_nodes.append(node) |
| elif node.type == 'DMA_Controller': |
| dma_nodes.append(node) |
| |
| # Obviously the number or rows must be <= the number of routers |
| # and evenly divisible. Also the number of caches must be a |
| # multiple of the number of routers and the number of directories |
| # must be four. |
| assert(num_rows > 0 and num_rows <= num_routers) |
| num_columns = int(num_routers / num_rows) |
| assert(num_columns * num_rows == num_routers) |
| caches_per_router, remainder = divmod(len(cache_nodes), num_routers) |
| assert(remainder == 0) |
| assert(len(dir_nodes) == 4) |
| |
| # Create the routers in the mesh |
| routers = [Router(router_id=i, latency = router_latency) \ |
| for i in range(num_routers)] |
| network.routers = routers |
| |
| # link counter to set unique link ids |
| link_count = 0 |
| |
| # Connect each cache controller to the appropriate router |
| ext_links = [] |
| for (i, n) in enumerate(cache_nodes): |
| cntrl_level, router_id = divmod(i, num_routers) |
| assert(cntrl_level < caches_per_router) |
| ext_links.append(ExtLink(link_id=link_count, ext_node=n, |
| int_node=routers[router_id], |
| latency = link_latency)) |
| link_count += 1 |
| |
| # NUMA Node for each quadrant |
| # With odd columns or rows, the nodes will be unequal |
| numa_nodes = [ [], [], [], []] |
| for i in xrange(num_routers): |
| if i % num_columns < num_columns / 2 and \ |
| i < num_routers / 2: |
| numa_nodes[0].append(i) |
| elif i % num_columns >= num_columns / 2 and \ |
| i < num_routers / 2: |
| numa_nodes[1].append(i) |
| elif i % num_columns < num_columns / 2 and \ |
| i >= num_routers / 2: |
| numa_nodes[2].append(i) |
| else: |
| numa_nodes[3].append(i) |
| |
| num_numa_nodes = 0 |
| for n in numa_nodes: |
| if n: |
| num_numa_nodes += 1 |
| |
| # Connect the dir nodes to the corners. |
| ext_links.append(ExtLink(link_id=link_count, ext_node=dir_nodes[0], |
| int_node=routers[0], |
| latency = link_latency)) |
| link_count += 1 |
| ext_links.append(ExtLink(link_id=link_count, ext_node=dir_nodes[1], |
| int_node=routers[num_columns - 1], |
| latency = link_latency)) |
| link_count += 1 |
| ext_links.append(ExtLink(link_id=link_count, ext_node=dir_nodes[2], |
| int_node=routers[num_routers - num_columns], |
| latency = link_latency)) |
| link_count += 1 |
| ext_links.append(ExtLink(link_id=link_count, ext_node=dir_nodes[3], |
| int_node=routers[num_routers - 1], |
| latency = link_latency)) |
| link_count += 1 |
| |
| # Connect the dma nodes to router 0. These should only be DMA nodes. |
| for (i, node) in enumerate(dma_nodes): |
| assert(node.type == 'DMA_Controller') |
| ext_links.append(ExtLink(link_id=link_count, ext_node=node, |
| int_node=routers[0], |
| latency = link_latency)) |
| |
| network.ext_links = ext_links |
| |
| # Create the mesh links. |
| int_links = [] |
| |
| # East output to West input links (weight = 1) |
| for row in range(num_rows): |
| for col in range(num_columns): |
| if (col + 1 < num_columns): |
| east_out = col + (row * num_columns) |
| west_in = (col + 1) + (row * num_columns) |
| int_links.append(IntLink(link_id=link_count, |
| src_node=routers[east_out], |
| dst_node=routers[west_in], |
| src_outport="East", |
| dst_inport="West", |
| latency = link_latency, |
| weight=1)) |
| link_count += 1 |
| |
| # West output to East input links (weight = 1) |
| for row in range(num_rows): |
| for col in range(num_columns): |
| if (col + 1 < num_columns): |
| east_in = col + (row * num_columns) |
| west_out = (col + 1) + (row * num_columns) |
| int_links.append(IntLink(link_id=link_count, |
| src_node=routers[west_out], |
| dst_node=routers[east_in], |
| src_outport="West", |
| dst_inport="East", |
| latency = link_latency, |
| weight=1)) |
| link_count += 1 |
| |
| # North output to South input links (weight = 2) |
| for col in range(num_columns): |
| for row in range(num_rows): |
| if (row + 1 < num_rows): |
| north_out = col + (row * num_columns) |
| south_in = col + ((row + 1) * num_columns) |
| int_links.append(IntLink(link_id=link_count, |
| src_node=routers[north_out], |
| dst_node=routers[south_in], |
| src_outport="North", |
| dst_inport="South", |
| latency = link_latency, |
| weight=2)) |
| link_count += 1 |
| |
| # South output to North input links (weight = 2) |
| for col in range(num_columns): |
| for row in range(num_rows): |
| if (row + 1 < num_rows): |
| north_in = col + (row * num_columns) |
| south_out = col + ((row + 1) * num_columns) |
| int_links.append(IntLink(link_id=link_count, |
| src_node=routers[south_out], |
| dst_node=routers[north_in], |
| src_outport="South", |
| dst_inport="North", |
| latency = link_latency, |
| weight=2)) |
| link_count += 1 |
| |
| |
| network.int_links = int_links |
| |
| # Register nodes with filesystem |
| def registerTopology(self, options): |
| i = 0 |
| for n in numa_nodes: |
| if n: |
| FileSystemConfig.register_node(n, |
| MemorySize(options.mem_size) / num_numa_nodes, i) |
| i += 1 |
| |
