| /* |
| * Copyright (c) 2015-2018 Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * For use for simulation and test purposes only |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * 3. Neither the name of the copyright holder nor the names of its |
| * contributors may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Authors: Eric van Tassell |
| */ |
| |
| #include "dev/hsa/hsa_packet_processor.hh" |
| |
| #include <cstring> |
| |
| #include "base/chunk_generator.hh" |
| #include "base/compiler.hh" |
| #include "debug/HSAPacketProcessor.hh" |
| #include "dev/dma_device.hh" |
| #include "dev/hsa/hsa_device.hh" |
| #include "dev/hsa/hsa_packet.hh" |
| #include "dev/hsa/hw_scheduler.hh" |
| #include "mem/packet_access.hh" |
| #include "mem/page_table.hh" |
| #include "sim/process.hh" |
| #include "sim/syscall_emul_buf.hh" |
| #include "sim/system.hh" |
| |
| #define HSAPP_EVENT_DESCRIPTION_GENERATOR(XEVENT) \ |
| const char* \ |
| HSAPacketProcessor::XEVENT::description() const \ |
| { \ |
| return #XEVENT; \ |
| } |
| |
| #define PKT_TYPE(PKT) ((hsa_packet_type_t)(((PKT->header) >> \ |
| HSA_PACKET_HEADER_TYPE) & (HSA_PACKET_HEADER_WIDTH_TYPE - 1))) |
| |
| HSAPP_EVENT_DESCRIPTION_GENERATOR(UpdateReadDispIdDmaEvent) |
| HSAPP_EVENT_DESCRIPTION_GENERATOR(CmdQueueCmdDmaEvent) |
| HSAPP_EVENT_DESCRIPTION_GENERATOR(QueueProcessEvent) |
| HSAPP_EVENT_DESCRIPTION_GENERATOR(DepSignalsReadDmaEvent) |
| |
| HSAPacketProcessor::HSAPacketProcessor(const Params *p) |
| : DmaDevice(p), numHWQueues(p->numHWQueues), pioAddr(p->pioAddr), |
| pioSize(PAGE_SIZE), pioDelay(10), pktProcessDelay(p->pktProcessDelay) |
| { |
| DPRINTF(HSAPacketProcessor, "%s:\n", __FUNCTION__); |
| hwSchdlr = new HWScheduler(this, p->wakeupDelay); |
| regdQList.resize(numHWQueues); |
| for (int i = 0; i < numHWQueues; i++) { |
| regdQList[i] = new RQLEntry(this, i); |
| } |
| } |
| |
| HSAPacketProcessor::~HSAPacketProcessor() |
| { |
| for (auto &queue : regdQList) { |
| delete queue; |
| } |
| } |
| |
| void |
| HSAPacketProcessor::unsetDeviceQueueDesc(uint64_t queue_id) |
| { |
| hwSchdlr->unregisterQueue(queue_id); |
| } |
| |
| void |
| HSAPacketProcessor::setDeviceQueueDesc(uint64_t hostReadIndexPointer, |
| uint64_t basePointer, |
| uint64_t queue_id, |
| uint32_t size) |
| { |
| DPRINTF(HSAPacketProcessor, |
| "%s:base = %p, qID = %d, ze = %d\n", __FUNCTION__, |
| (void *)basePointer, queue_id, size); |
| hwSchdlr->registerNewQueue(hostReadIndexPointer, |
| basePointer, queue_id, size); |
| } |
| |
| AddrRangeList |
| HSAPacketProcessor::getAddrRanges() const |
| { |
| assert(pioSize != 0); |
| |
| AddrRangeList ranges; |
| ranges.push_back(RangeSize(pioAddr, pioSize)); |
| |
| return ranges; |
| } |
| |
| // Basically only processes writes to the queue doorbell register. |
| Tick |
| HSAPacketProcessor::write(Packet *pkt) |
| { |
| assert(pkt->getAddr() >= pioAddr && pkt->getAddr() < pioAddr + pioSize); |
| |
| // TODO: How to get pid?? |
| Addr M5_VAR_USED daddr = pkt->getAddr() - pioAddr; |
| |
| DPRINTF(HSAPacketProcessor, |
| "%s: write of size %d to reg-offset %d (0x%x)\n", |
| __FUNCTION__, pkt->getSize(), daddr, daddr); |
| |
| uint32_t doorbell_reg = pkt->get<uint32_t>(); |
| |
| DPRINTF(HSAPacketProcessor, |
| "%s: write data 0x%x to offset %d (0x%x)\n", |
| __FUNCTION__, doorbell_reg, daddr, daddr); |
| hwSchdlr->write(daddr, doorbell_reg); |
| pkt->makeAtomicResponse(); |
| return pioDelay; |
| } |
| |
| Tick |
| HSAPacketProcessor::read(Packet *pkt) |
| { |
| pkt->makeAtomicResponse(); |
| pkt->setBadAddress(); |
| return pioDelay; |
| } |
| |
| void |
| HSAPacketProcessor::translateOrDie(Addr vaddr, Addr &paddr) |
| { |
| // Grab the process and try to translate the virtual address with it; with |
| // new extensions, it will likely be wrong to just arbitrarily grab context |
| // zero. |
| auto process = sys->getThreadContext(0)->getProcessPtr(); |
| auto mem_state = process->getMemState(); |
| |
| if (!mem_state->translate(vaddr, paddr)) |
| fatal("failed translation: vaddr 0x%x\n", vaddr); |
| } |
| |
| void |
| HSAPacketProcessor::dmaVirt(DmaFnPtr dmaFn, Addr addr, unsigned size, |
| Event *event, void *data, Tick delay) |
| { |
| if (size == 0) { |
| schedule(event, curTick() + delay); |
| return; |
| } |
| |
| // move the buffer data pointer with the chunks |
| uint8_t *loc_data = (uint8_t*)data; |
| |
| for (ChunkGenerator gen(addr, size, PAGE_SIZE); !gen.done(); gen.next()) { |
| Addr phys; |
| |
| // translate pages into their corresponding frames |
| translateOrDie(gen.addr(), phys); |
| |
| // only send event on last transfer; transfers complete in-order |
| Event *ev = gen.last() ? event : NULL; |
| |
| (this->*dmaFn)(phys, gen.size(), ev, loc_data, delay); |
| |
| loc_data += gen.size(); |
| } |
| } |
| |
| void |
| HSAPacketProcessor::dmaReadVirt(Addr host_addr, unsigned size, |
| Event *event, void *data, Tick delay) |
| { |
| DPRINTF(HSAPacketProcessor, |
| "%s:host_addr = 0x%lx, size = %d\n", __FUNCTION__, host_addr, size); |
| dmaVirt(&DmaDevice::dmaRead, host_addr, size, event, data, delay); |
| } |
| |
| void |
| HSAPacketProcessor::dmaWriteVirt(Addr host_addr, unsigned size, |
| Event *event, void *data, Tick delay) |
| { |
| dmaVirt(&DmaDevice::dmaWrite, host_addr, size, event, data, delay); |
| } |
| |
| HSAPacketProcessor::UpdateReadDispIdDmaEvent:: |
| UpdateReadDispIdDmaEvent() |
| : Event(Default_Pri, AutoDelete) |
| { |
| DPRINTF(HSAPacketProcessor, "%s:\n", __FUNCTION__); |
| setFlags(AutoDelete); |
| } |
| |
| void |
| HSAPacketProcessor::updateReadIndex(int pid, uint32_t rl_idx) |
| { |
| AQLRingBuffer* aqlbuf = regdQList[rl_idx]->qCntxt.aqlBuf; |
| HSAQueueDescriptor* qDesc = regdQList[rl_idx]->qCntxt.qDesc; |
| auto *dmaEvent = new UpdateReadDispIdDmaEvent(); |
| |
| DPRINTF(HSAPacketProcessor, |
| "%s: read-pointer offset [0x%x]\n", __FUNCTION__, aqlbuf->rdIdx()); |
| |
| dmaWriteVirt((Addr)qDesc->hostReadIndexPtr, |
| sizeof(aqlbuf->rdIdx()), |
| dmaEvent, aqlbuf->rdIdxPtr()); |
| |
| DPRINTF(HSAPacketProcessor, |
| "%s: rd-ptr offset [0x%x], wr-ptr offset [0x%x], space used = %d," \ |
| " q size = %d, is_empty = %s, active list ID = %d\n", __FUNCTION__, |
| qDesc->readIndex, qDesc->writeIndex, qDesc->spaceUsed(), |
| qDesc->numElts, qDesc->isEmpty()? "true" : "false", rl_idx); |
| if (qDesc->writeIndex != aqlbuf->wrIdx()) { |
| getCommandsFromHost(pid, rl_idx); |
| } |
| } |
| |
| HSAPacketProcessor::CmdQueueCmdDmaEvent:: |
| CmdQueueCmdDmaEvent(HSAPacketProcessor *_hsaPP, int _pid, bool _isRead, |
| uint32_t _ix_start, unsigned _num_pkts, |
| dma_series_ctx *_series_ctx, void *_dest_4debug) |
| : Event(Default_Pri, AutoDelete), hsaPP(_hsaPP), pid(_pid), isRead(_isRead), |
| ix_start(_ix_start), num_pkts(_num_pkts), series_ctx(_series_ctx), |
| dest_4debug(_dest_4debug) |
| { |
| setFlags(AutoDelete); |
| |
| DPRINTF(HSAPacketProcessor, "%s, ix = %d, npkts = %d," \ |
| "active list ID = %d\n", __FUNCTION__, |
| _ix_start, num_pkts, series_ctx->rl_idx); |
| } |
| |
| void |
| HSAPacketProcessor::CmdQueueCmdDmaEvent::process() |
| { |
| uint32_t rl_idx = series_ctx->rl_idx; |
| AQLRingBuffer *aqlRingBuffer M5_VAR_USED = |
| hsaPP->regdQList[rl_idx]->qCntxt.aqlBuf; |
| HSAQueueDescriptor* qDesc = |
| hsaPP->regdQList[rl_idx]->qCntxt.qDesc; |
| DPRINTF(HSAPacketProcessor, ">%s, ix = %d, npkts = %d," \ |
| " pktsRemaining = %d, active list ID = %d\n", __FUNCTION__, |
| ix_start, num_pkts, series_ctx->pkts_2_go, |
| rl_idx); |
| if (isRead) { |
| series_ctx->pkts_2_go -= num_pkts; |
| if (series_ctx->pkts_2_go == 0) { |
| // Mark DMA as completed |
| qDesc->dmaInProgress = false; |
| DPRINTF(HSAPacketProcessor, |
| "%s: schedule Qwakeup next cycle, rdIdx %d, wrIdx %d," \ |
| " dispIdx %d, active list ID = %d\n", |
| __FUNCTION__, aqlRingBuffer->rdIdx(), |
| aqlRingBuffer->wrIdx(), aqlRingBuffer->dispIdx(), rl_idx); |
| // schedule queue wakeup |
| hsaPP->schedAQLProcessing(rl_idx); |
| delete series_ctx; |
| } |
| } |
| } |
| |
| void |
| HSAPacketProcessor::schedAQLProcessing(uint32_t rl_idx) |
| { |
| RQLEntry *queue = regdQList[rl_idx]; |
| if (!queue->aqlProcessEvent.scheduled()) { |
| Tick processingTick = curTick() + pktProcessDelay; |
| schedule(queue->aqlProcessEvent, processingTick); |
| DPRINTF(HSAPacketProcessor, "AQL processing scheduled at tick: %d\n", |
| processingTick); |
| } else { |
| DPRINTF(HSAPacketProcessor, "AQL processing already scheduled\n"); |
| } |
| } |
| |
| bool |
| HSAPacketProcessor::processPkt(void* pkt, uint32_t rl_idx, Addr host_pkt_addr) |
| { |
| bool is_submitted = false; |
| SignalState *dep_sgnl_rd_st = &(regdQList[rl_idx]->depSignalRdState); |
| // Dependency signals are not read yet. And this can only be a retry. |
| // The retry logic will schedule the packet processor wakeup |
| if (dep_sgnl_rd_st->pendingReads != 0) { |
| return false; |
| } |
| // `pkt` can be typecasted to any type of AQL packet since they all |
| // have header information at offset zero |
| auto disp_pkt = (_hsa_dispatch_packet_t *)pkt; |
| hsa_packet_type_t pkt_type = PKT_TYPE(disp_pkt); |
| if (pkt_type == HSA_PACKET_TYPE_VENDOR_SPECIFIC) { |
| DPRINTF(HSAPacketProcessor, "%s: submitting vendor specific pkt" \ |
| " active list ID = %d\n", __FUNCTION__, rl_idx); |
| // Submit packet to HSA device (dispatcher) |
| hsa_device->submitVendorPkt((void *)disp_pkt, rl_idx, host_pkt_addr); |
| is_submitted = true; |
| } else if (pkt_type == HSA_PACKET_TYPE_KERNEL_DISPATCH) { |
| DPRINTF(HSAPacketProcessor, "%s: submitting kernel dispatch pkt" \ |
| " active list ID = %d\n", __FUNCTION__, rl_idx); |
| // Submit packet to HSA device (dispatcher) |
| hsa_device->submitDispatchPkt((void *)disp_pkt, rl_idx, host_pkt_addr); |
| is_submitted = true; |
| } else if (pkt_type == HSA_PACKET_TYPE_BARRIER_AND) { |
| DPRINTF(HSAPacketProcessor, "%s: Processing barrier packet" \ |
| " active list ID = %d\n", __FUNCTION__, rl_idx); |
| auto bar_and_pkt = (_hsa_barrier_and_packet_t *)pkt; |
| bool isReady = true; |
| // Loop thorugh all the completion signals to see if this barrier |
| // packet is ready. |
| for (int i = 0; i < NumSignalsPerBarrier; i++) { |
| // dep_signal = zero imply no signal connected |
| if (bar_and_pkt->dep_signal[i]) { |
| // The signal value is aligned 8 bytes from |
| // the actual handle in the runtime |
| uint64_t signal_addr = |
| (uint64_t) (((uint64_t *) bar_and_pkt->dep_signal[i]) + 1); |
| hsa_signal_value_t *signal_val = |
| &(dep_sgnl_rd_st->values[i]); |
| DPRINTF(HSAPacketProcessor, "%s: Barrier pkt dep sgnl[%d]" \ |
| " , sig addr %x, value %d active list ID = %d\n", |
| __FUNCTION__, i, signal_addr, |
| *signal_val, rl_idx); |
| // The if condition will be executed everytime except the |
| // very first time this barrier packet is encounteresd. |
| if (dep_sgnl_rd_st->allRead) { |
| if (*signal_val != 0) { |
| // This signal is not yet ready, read it again |
| isReady = false; |
| DepSignalsReadDmaEvent *sgnl_rd_evnt = |
| new DepSignalsReadDmaEvent(dep_sgnl_rd_st); |
| dmaReadVirt(signal_addr, sizeof(hsa_signal_value_t), |
| sgnl_rd_evnt, signal_val); |
| dep_sgnl_rd_st->pendingReads++; |
| DPRINTF(HSAPacketProcessor, "%s: Pending reads %d," \ |
| " active list %d\n", __FUNCTION__, |
| dep_sgnl_rd_st->pendingReads, rl_idx); |
| } |
| } else { |
| // This signal is not yet ready, read it again |
| isReady = false; |
| DepSignalsReadDmaEvent *sgnl_rd_evnt = |
| new DepSignalsReadDmaEvent(dep_sgnl_rd_st); |
| dmaReadVirt(signal_addr, sizeof(hsa_signal_value_t), |
| sgnl_rd_evnt, signal_val); |
| dep_sgnl_rd_st->pendingReads++; |
| DPRINTF(HSAPacketProcessor, "%s: Pending reads %d," \ |
| " active list %d\n", __FUNCTION__, |
| dep_sgnl_rd_st->pendingReads, rl_idx); |
| } |
| } |
| } |
| if (isReady) { |
| assert(dep_sgnl_rd_st->pendingReads == 0); |
| DPRINTF(HSAPacketProcessor, "%s: Barrier packet completed" \ |
| " active list ID = %d\n", __FUNCTION__, rl_idx); |
| // TODO: Completion signal of barrier packet to be |
| // atomically decremented here |
| finishPkt((void*)bar_and_pkt, rl_idx); |
| is_submitted = true; |
| // Reset signal values |
| dep_sgnl_rd_st->resetSigVals(); |
| // The completion signal is connected |
| if (bar_and_pkt->completion_signal != 0) { |
| // The signal value is aligned 8 bytes |
| // from the actual handle in the runtime |
| uint64_t signal_addr = |
| (uint64_t) (((uint64_t *) |
| bar_and_pkt->completion_signal) + 1); |
| DPRINTF(HSAPacketProcessor, "Triggering barrier packet" \ |
| " completion signal: %x!\n", signal_addr); |
| /** |
| * HACK: The semantics of the HSA signal is to |
| * decrement the current signal value. |
| * I'm going to cheat here and read out |
| * the value from main memory using functional |
| * access, and then just DMA the decremented value. |
| * The reason for this is that the DMASequencer does |
| * not support atomic operations. |
| */ |
| auto tc = sys->getThreadContext(0); |
| auto process = tc->getProcessPtr(); |
| auto mem_state = process->getMemState(); |
| auto &virt_proxy = mem_state->getVirtProxy(); |
| TypedBufferArg<uint64_t> prev_signal(signal_addr); |
| prev_signal.copyIn(virt_proxy); |
| |
| hsa_signal_value_t *new_signal = new hsa_signal_value_t; |
| *new_signal = (hsa_signal_value_t) *prev_signal - 1; |
| |
| dmaWriteVirt(signal_addr, |
| sizeof(hsa_signal_value_t), NULL, new_signal, 0); |
| } |
| } |
| if (dep_sgnl_rd_st->pendingReads > 0) { |
| // Atleast one DepSignalsReadDmaEvent is scheduled this cycle |
| dep_sgnl_rd_st->allRead = false; |
| dep_sgnl_rd_st->discardRead = false; |
| } |
| } else if (pkt_type == HSA_PACKET_TYPE_BARRIER_OR) { |
| fatal("Unsupported packet type HSA_PACKET_TYPE_BARRIER_OR"); |
| } else if (pkt_type == HSA_PACKET_TYPE_INVALID) { |
| fatal("Unsupported packet type HSA_PACKET_TYPE_INVALID"); |
| } else { |
| fatal("Unsupported packet type %d\n", pkt_type); |
| } |
| return is_submitted; |
| } |
| |
| // Wakes up every fixed time interval (pktProcessDelay) and processes a single |
| // packet from the queue that scheduled this wakeup. If there are more |
| // packets in that queue, the next wakeup is scheduled. |
| void |
| HSAPacketProcessor::QueueProcessEvent::process() |
| { |
| AQLRingBuffer *aqlRingBuffer = hsaPP->regdQList[rqIdx]->qCntxt.aqlBuf; |
| DPRINTF(HSAPacketProcessor, |
| "%s: Qwakeup , rdIdx %d, wrIdx %d," \ |
| " dispIdx %d, active list ID = %d\n", |
| __FUNCTION__, aqlRingBuffer->rdIdx(), |
| aqlRingBuffer->wrIdx(), aqlRingBuffer->dispIdx(), rqIdx); |
| // In the future, we may support batch processing of packets. |
| // Then, we can just remove the break statements and the code |
| // will support batch processing. That is why we are using a |
| // "while loop" here instead on an "if" condition. |
| while (hsaPP->regdQList[rqIdx]->dispPending()) { |
| void *pkt = aqlRingBuffer->ptr(aqlRingBuffer->dispIdx()); |
| DPRINTF(HSAPacketProcessor, "%s: Attempting dispatch @ dispIdx[%d]\n", |
| __FUNCTION__, aqlRingBuffer->dispIdx()); |
| Addr host_addr = aqlRingBuffer->hostDispAddr(); |
| if (hsaPP->processPkt(pkt, rqIdx, host_addr)) { |
| aqlRingBuffer->incDispIdx(1); |
| DPRINTF(HSAPacketProcessor, "%s: Increment dispIdx[%d]\n", |
| __FUNCTION__, aqlRingBuffer->dispIdx()); |
| if (hsaPP->regdQList[rqIdx]->dispPending()) { |
| hsaPP->schedAQLProcessing(rqIdx); |
| } |
| break; |
| } else { |
| // This queue is blocked, scheduled a processing event |
| hsaPP->schedAQLProcessing(rqIdx); |
| break; |
| } |
| } |
| } |
| |
| void |
| HSAPacketProcessor::SignalState::handleReadDMA() |
| { |
| assert(pendingReads > 0); |
| pendingReads--; |
| if (pendingReads == 0) { |
| allRead = true; |
| if (discardRead) { |
| resetSigVals(); |
| } |
| } |
| } |
| |
| void |
| HSAPacketProcessor::getCommandsFromHost(int pid, uint32_t rl_idx) |
| { |
| HSAQueueDescriptor* qDesc = regdQList[rl_idx]->qCntxt.qDesc; |
| AQLRingBuffer *aqlRingBuffer = regdQList[rl_idx]->qCntxt.aqlBuf; |
| |
| DPRINTF(HSAPacketProcessor, |
| "%s: read-pointer offset[0x%x], write-pointer offset[0x%x]" |
| " doorbell(%d)[0x%x] \n", |
| __FUNCTION__, qDesc->readIndex, |
| qDesc->writeIndex, pid, qDesc->doorbellPointer); |
| |
| if (qDesc->dmaInProgress) { |
| // we'll try again when this dma transfer completes in updateReadIndex |
| return; |
| } |
| uint32_t num_umq = qDesc->spaceUsed(); |
| if (num_umq == 0) |
| return; // nothing to be gotten |
| uint32_t umq_nxt = qDesc->readIndex; |
| // Total AQL buffer size |
| uint32_t ttl_aql_buf = aqlRingBuffer->numObjs(); |
| // Available AQL buffer size. If the available buffer is less than |
| // demanded, number of available buffer is returned |
| uint32_t got_aql_buf = aqlRingBuffer->allocEntry(num_umq); |
| qDesc->readIndex += got_aql_buf; |
| uint32_t dma_start_ix = (aqlRingBuffer->wrIdx() - got_aql_buf) % |
| ttl_aql_buf; |
| dma_series_ctx *series_ctx = NULL; |
| |
| DPRINTF(HSAPacketProcessor, "%s: umq_nxt = %d, ttl_aql_buf = %d, " |
| "dma_start_ix = %d, num_umq = %d\n", __FUNCTION__, umq_nxt, |
| ttl_aql_buf, dma_start_ix, num_umq); |
| |
| if (got_aql_buf == 0) { |
| // we'll try again when some dma bufs are freed in freeEntry |
| qDesc->stalledOnDmaBufAvailability = true; |
| return; |
| } else { |
| qDesc->stalledOnDmaBufAvailability = false; |
| } |
| |
| uint32_t dma_b4_wrap = ttl_aql_buf - dma_start_ix; |
| while (got_aql_buf != 0 && num_umq != 0) { |
| uint32_t umq_b4_wrap = qDesc->numObjs() - |
| (umq_nxt % qDesc->objSize()); |
| uint32_t num_2_xfer |
| = std::min({umq_b4_wrap, dma_b4_wrap, num_umq, got_aql_buf}); |
| if (!series_ctx) { |
| qDesc->dmaInProgress = true; |
| series_ctx = new dma_series_ctx(got_aql_buf, got_aql_buf, |
| dma_start_ix, rl_idx); |
| } |
| |
| void *aql_buf = aqlRingBuffer->ptr(dma_start_ix); |
| CmdQueueCmdDmaEvent *dmaEvent |
| = new CmdQueueCmdDmaEvent(this, pid, true, dma_start_ix, |
| num_2_xfer, series_ctx, aql_buf); |
| DPRINTF(HSAPacketProcessor, |
| "%s: aql_buf = %p, umq_nxt = %d, dma_ix = %d, num2xfer = %d\n", |
| __FUNCTION__, aql_buf, umq_nxt, dma_start_ix, num_2_xfer); |
| |
| dmaReadVirt(qDesc->ptr(umq_nxt), num_2_xfer * qDesc->objSize(), |
| dmaEvent, aql_buf); |
| |
| aqlRingBuffer->saveHostDispAddr(qDesc->ptr(umq_nxt), num_2_xfer, |
| dma_start_ix); |
| |
| num_umq -= num_2_xfer; |
| got_aql_buf -= num_2_xfer; |
| dma_start_ix = (dma_start_ix + num_2_xfer) % ttl_aql_buf; |
| umq_nxt = (umq_nxt + num_2_xfer) % qDesc->numObjs(); |
| if (got_aql_buf == 0 && num_umq != 0) { |
| // There are more packets in the queue but |
| // not enough DMA buffers. Set the stalledOnDmaBufAvailability, |
| // we will try again in freeEntry |
| qDesc->stalledOnDmaBufAvailability = true; |
| } |
| } |
| } |
| |
| void |
| HSAPacketProcessor::displayQueueDescriptor(int pid, uint32_t rl_idx) |
| { |
| HSAQueueDescriptor* M5_VAR_USED qDesc = regdQList[rl_idx]->qCntxt.qDesc; |
| DPRINTF(HSAPacketProcessor, |
| "%s: pid[%d], basePointer[0x%lx], dBPointer[0x%lx], " |
| "writeIndex[0x%x], readIndex[0x%x], size(bytes)[0x%x]\n", |
| __FUNCTION__, pid, qDesc->basePointer, |
| qDesc->doorbellPointer, qDesc->writeIndex, |
| qDesc->readIndex, qDesc->numElts); |
| } |
| |
| AQLRingBuffer::AQLRingBuffer(uint32_t size, |
| const std::string name) |
| : _name(name), _wrIdx(0), _rdIdx(0), _dispIdx(0) |
| { |
| _aqlBuf.resize(size); |
| _aqlComplete.resize(size); |
| _hostDispAddresses.resize(size); |
| // Mark all packets as invalid and incomplete |
| for (auto& it : _aqlBuf) |
| it.header = HSA_PACKET_TYPE_INVALID; |
| std::fill(_aqlComplete.begin(), _aqlComplete.end(), false); |
| } |
| |
| bool |
| AQLRingBuffer::freeEntry(void *pkt) |
| { |
| _aqlComplete[(hsa_kernel_dispatch_packet_t *) pkt - _aqlBuf.data()] = true; |
| DPRINTF(HSAPacketProcessor, "%s: pkt_ix = %d; "\ |
| " # free entries = %d, wrIdx = %d, rdIdx = %d\n", __FUNCTION__, |
| (hsa_kernel_dispatch_packet_t *) pkt - _aqlBuf.data(), |
| nFree(), wrIdx(), rdIdx()); |
| // Packets can complete out-of-order. This code "retires" packets in-order |
| // by updating the read pointer in the MQD when a contiguous chunk of |
| // packets have finished. |
| uint32_t old_rdIdx = rdIdx(); |
| while (_aqlComplete[rdIdx() % numObjs()]) { |
| _aqlComplete[rdIdx() % numObjs()] = false; |
| _aqlBuf[rdIdx() % numObjs()].header = HSA_PACKET_TYPE_INVALID; |
| incRdIdx(1); |
| } |
| return (old_rdIdx != rdIdx()); |
| } |
| |
| void |
| HSAPacketProcessor::setDevice(HSADevice *dev) |
| { |
| this->hsa_device = dev; |
| } |
| |
| int |
| AQLRingBuffer::allocEntry(uint32_t nBufReq) |
| { |
| DPRINTF(HSAPacketProcessor, "%s: nReq = %d\n", __FUNCTION__, nBufReq); |
| if (nFree() == 0) { |
| DPRINTF(HSAPacketProcessor, "%s: return = %d\n", __FUNCTION__, 0); |
| return 0; |
| } |
| |
| if (nBufReq > nFree()) |
| nBufReq = nFree(); |
| |
| DPRINTF(HSAPacketProcessor, "%s: ix1stFree = %d\n", __FUNCTION__, wrIdx()); |
| incWrIdx(nBufReq); |
| DPRINTF(HSAPacketProcessor, "%s: return = %d, wrIdx = %d\n", |
| __FUNCTION__, nBufReq, wrIdx()); |
| return nBufReq; |
| } |
| |
| HSAPacketProcessor * |
| HSAPacketProcessorParams::create() |
| { |
| return new HSAPacketProcessor(this); |
| } |
| |
| void |
| HSAPacketProcessor::finishPkt(void *pvPkt, uint32_t rl_idx) |
| { |
| HSAQueueDescriptor* qDesc = regdQList[rl_idx]->qCntxt.qDesc; |
| if (regdQList[rl_idx]->qCntxt.aqlBuf->freeEntry(pvPkt)) |
| updateReadIndex(0, rl_idx); |
| DPRINTF(HSAPacketProcessor, |
| "%s: rd-ptr offset [0x%x], wr-ptr offset [0x%x], space used = %d," \ |
| " q size = %d, stalled = %s, empty = %s, active list ID = %d\n", |
| __FUNCTION__, qDesc->readIndex, qDesc->writeIndex, |
| qDesc->spaceUsed(), qDesc->numElts, |
| qDesc->stalledOnDmaBufAvailability? "true" : "false", |
| qDesc->isEmpty()? "true" : "false", rl_idx); |
| // DMA buffer is freed, check the queue to see if there are DMA |
| // accesses blocked becasue of non-availability of DMA buffer |
| if (qDesc->stalledOnDmaBufAvailability) { |
| assert(!qDesc->isEmpty()); |
| getCommandsFromHost(0, rl_idx); // TODO:assign correct pid |
| // when implementing |
| // multi-process support |
| } |
| } |
