| /* |
| * Copyright (c) 2012-2020 ARM Limited |
| * All rights reserved |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Copyright (c) 2013 Amin Farmahini-Farahani |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /** |
| * @file |
| * MemCtrl declaration |
| */ |
| |
| #ifndef __MEM_CTRL_HH__ |
| #define __MEM_CTRL_HH__ |
| |
| #include <deque> |
| #include <string> |
| #include <unordered_set> |
| #include <utility> |
| #include <vector> |
| |
| #include "base/callback.hh" |
| #include "base/statistics.hh" |
| #include "enums/MemSched.hh" |
| #include "mem/qos/mem_ctrl.hh" |
| #include "mem/qport.hh" |
| #include "params/MemCtrl.hh" |
| #include "sim/eventq.hh" |
| |
| namespace gem5 |
| { |
| |
| namespace memory |
| { |
| |
| class MemInterface; |
| class DRAMInterface; |
| class NVMInterface; |
| |
| /** |
| * A burst helper helps organize and manage a packet that is larger than |
| * the memory burst size. A system packet that is larger than the burst size |
| * is split into multiple packets and all those packets point to |
| * a single burst helper such that we know when the whole packet is served. |
| */ |
| class BurstHelper |
| { |
| public: |
| |
| /** Number of bursts requred for a system packet **/ |
| const unsigned int burstCount; |
| |
| /** Number of bursts serviced so far for a system packet **/ |
| unsigned int burstsServiced; |
| |
| BurstHelper(unsigned int _burstCount) |
| : burstCount(_burstCount), burstsServiced(0) |
| { } |
| }; |
| |
| /** |
| * A memory packet stores packets along with the timestamp of when |
| * the packet entered the queue, and also the decoded address. |
| */ |
| class MemPacket |
| { |
| public: |
| |
| /** When did request enter the controller */ |
| const Tick entryTime; |
| |
| /** When will request leave the controller */ |
| Tick readyTime; |
| |
| /** This comes from the outside world */ |
| const PacketPtr pkt; |
| |
| /** RequestorID associated with the packet */ |
| const RequestorID _requestorId; |
| |
| const bool read; |
| |
| /** Does this packet access DRAM?*/ |
| const bool dram; |
| |
| /** pseudo channel num*/ |
| const uint8_t pseudoChannel; |
| |
| /** Will be populated by address decoder */ |
| const uint8_t rank; |
| const uint8_t bank; |
| const uint32_t row; |
| |
| /** |
| * Bank id is calculated considering banks in all the ranks |
| * eg: 2 ranks each with 8 banks, then bankId = 0 --> rank0, bank0 and |
| * bankId = 8 --> rank1, bank0 |
| */ |
| const uint16_t bankId; |
| |
| /** |
| * The starting address of the packet. |
| * This address could be unaligned to burst size boundaries. The |
| * reason is to keep the address offset so we can accurately check |
| * incoming read packets with packets in the write queue. |
| */ |
| Addr addr; |
| |
| /** |
| * The size of this dram packet in bytes |
| * It is always equal or smaller than the burst size |
| */ |
| unsigned int size; |
| |
| /** |
| * A pointer to the BurstHelper if this MemPacket is a split packet |
| * If not a split packet (common case), this is set to NULL |
| */ |
| BurstHelper* burstHelper; |
| |
| /** |
| * QoS value of the encapsulated packet read at queuing time |
| */ |
| uint8_t _qosValue; |
| |
| /** |
| * Set the packet QoS value |
| * (interface compatibility with Packet) |
| */ |
| inline void qosValue(const uint8_t qv) { _qosValue = qv; } |
| |
| /** |
| * Get the packet QoS value |
| * (interface compatibility with Packet) |
| */ |
| inline uint8_t qosValue() const { return _qosValue; } |
| |
| /** |
| * Get the packet RequestorID |
| * (interface compatibility with Packet) |
| */ |
| inline RequestorID requestorId() const { return _requestorId; } |
| |
| /** |
| * Get the packet size |
| * (interface compatibility with Packet) |
| */ |
| inline unsigned int getSize() const { return size; } |
| |
| /** |
| * Get the packet address |
| * (interface compatibility with Packet) |
| */ |
| inline Addr getAddr() const { return addr; } |
| |
| /** |
| * Return true if its a read packet |
| * (interface compatibility with Packet) |
| */ |
| inline bool isRead() const { return read; } |
| |
| /** |
| * Return true if its a write packet |
| * (interface compatibility with Packet) |
| */ |
| inline bool isWrite() const { return !read; } |
| |
| /** |
| * Return true if its a DRAM access |
| */ |
| inline bool isDram() const { return dram; } |
| |
| MemPacket(PacketPtr _pkt, bool is_read, bool is_dram, uint8_t _channel, |
| uint8_t _rank, uint8_t _bank, uint32_t _row, uint16_t bank_id, |
| Addr _addr, unsigned int _size) |
| : entryTime(curTick()), readyTime(curTick()), pkt(_pkt), |
| _requestorId(pkt->requestorId()), |
| read(is_read), dram(is_dram), pseudoChannel(_channel), rank(_rank), |
| bank(_bank), row(_row), bankId(bank_id), addr(_addr), size(_size), |
| burstHelper(NULL), _qosValue(_pkt->qosValue()) |
| { } |
| |
| }; |
| |
| // The memory packets are store in a multiple dequeue structure, |
| // based on their QoS priority |
| typedef std::deque<MemPacket*> MemPacketQueue; |
| |
| |
| /** |
| * The memory controller is a single-channel memory controller capturing |
| * the most important timing constraints associated with a |
| * contemporary controller. For multi-channel memory systems, the controller |
| * is combined with a crossbar model, with the channel address |
| * interleaving taking part in the crossbar. |
| * |
| * As a basic design principle, this controller |
| * model is not cycle callable, but instead uses events to: 1) decide |
| * when new decisions can be made, 2) when resources become available, |
| * 3) when things are to be considered done, and 4) when to send |
| * things back. The controller interfaces to media specific interfaces |
| * to enable flexible topoloties. |
| * Through these simple principles, the model delivers |
| * high performance, and lots of flexibility, allowing users to |
| * evaluate the system impact of a wide range of memory technologies. |
| * |
| * For more details, please see Hansson et al, "Simulating DRAM |
| * controllers for future system architecture exploration", |
| * Proc. ISPASS, 2014. If you use this model as part of your research |
| * please cite the paper. |
| * |
| */ |
| class MemCtrl : public qos::MemCtrl |
| { |
| protected: |
| |
| // For now, make use of a queued response port to avoid dealing with |
| // flow control for the responses being sent back |
| class MemoryPort : public QueuedResponsePort |
| { |
| |
| RespPacketQueue queue; |
| MemCtrl& ctrl; |
| |
| public: |
| |
| MemoryPort(const std::string& name, MemCtrl& _ctrl); |
| |
| protected: |
| |
| Tick recvAtomic(PacketPtr pkt) override; |
| Tick recvAtomicBackdoor( |
| PacketPtr pkt, MemBackdoorPtr &backdoor) override; |
| |
| void recvFunctional(PacketPtr pkt) override; |
| |
| bool recvTimingReq(PacketPtr) override; |
| |
| AddrRangeList getAddrRanges() const override; |
| |
| }; |
| |
| /** |
| * Our incoming port, for a multi-ported controller add a crossbar |
| * in front of it |
| */ |
| MemoryPort port; |
| |
| /** |
| * Remember if the memory system is in timing mode |
| */ |
| bool isTimingMode; |
| |
| /** |
| * Remember if we have to retry a request when available. |
| */ |
| bool retryRdReq; |
| bool retryWrReq; |
| |
| /** |
| * Bunch of things requires to setup "events" in gem5 |
| * When event "respondEvent" occurs for example, the method |
| * processRespondEvent is called; no parameters are allowed |
| * in these methods |
| */ |
| virtual void processNextReqEvent(MemInterface* mem_intr, |
| MemPacketQueue& resp_queue, |
| EventFunctionWrapper& resp_event, |
| EventFunctionWrapper& next_req_event, |
| bool& retry_wr_req); |
| EventFunctionWrapper nextReqEvent; |
| |
| virtual void processRespondEvent(MemInterface* mem_intr, |
| MemPacketQueue& queue, |
| EventFunctionWrapper& resp_event, |
| bool& retry_rd_req); |
| EventFunctionWrapper respondEvent; |
| |
| /** |
| * Check if the read queue has room for more entries |
| * |
| * @param pkt_count The number of entries needed in the read queue |
| * @return true if read queue is full, false otherwise |
| */ |
| bool readQueueFull(unsigned int pkt_count) const; |
| |
| /** |
| * Check if the write queue has room for more entries |
| * |
| * @param pkt_count The number of entries needed in the write queue |
| * @return true if write queue is full, false otherwise |
| */ |
| bool writeQueueFull(unsigned int pkt_count) const; |
| |
| /** |
| * When a new read comes in, first check if the write q has a |
| * pending request to the same address.\ If not, decode the |
| * address to populate rank/bank/row, create one or mutliple |
| * "mem_pkt", and push them to the back of the read queue.\ |
| * If this is the only |
| * read request in the system, schedule an event to start |
| * servicing it. |
| * |
| * @param pkt The request packet from the outside world |
| * @param pkt_count The number of memory bursts the pkt |
| * @param mem_intr The memory interface this pkt will |
| * eventually go to |
| * @return if all the read pkts are already serviced by wrQ |
| */ |
| bool addToReadQueue(PacketPtr pkt, unsigned int pkt_count, |
| MemInterface* mem_intr); |
| |
| /** |
| * Decode the incoming pkt, create a mem_pkt and push to the |
| * back of the write queue. \If the write q length is more than |
| * the threshold specified by the user, ie the queue is beginning |
| * to get full, stop reads, and start draining writes. |
| * |
| * @param pkt The request packet from the outside world |
| * @param pkt_count The number of memory bursts the pkt |
| * @param mem_intr The memory interface this pkt will |
| * eventually go to |
| */ |
| void addToWriteQueue(PacketPtr pkt, unsigned int pkt_count, |
| MemInterface* mem_intr); |
| |
| /** |
| * Actually do the burst based on media specific access function. |
| * Update bus statistics when complete. |
| * |
| * @param mem_pkt The memory packet created from the outside world pkt |
| * @param mem_intr The memory interface to access |
| * @return Time when the command was issued |
| * |
| */ |
| virtual Tick doBurstAccess(MemPacket* mem_pkt, MemInterface* mem_intr); |
| |
| /** |
| * When a packet reaches its "readyTime" in the response Q, |
| * use the "access()" method in AbstractMemory to actually |
| * create the response packet, and send it back to the outside |
| * world requestor. |
| * |
| * @param pkt The packet from the outside world |
| * @param static_latency Static latency to add before sending the packet |
| * @param mem_intr the memory interface to access |
| */ |
| virtual void accessAndRespond(PacketPtr pkt, Tick static_latency, |
| MemInterface* mem_intr); |
| |
| /** |
| * Determine if there is a packet that can issue. |
| * |
| * @param pkt The packet to evaluate |
| */ |
| virtual bool packetReady(MemPacket* pkt, MemInterface* mem_intr); |
| |
| /** |
| * Calculate the minimum delay used when scheduling a read-to-write |
| * transision. |
| * @param return minimum delay |
| */ |
| virtual Tick minReadToWriteDataGap(); |
| |
| /** |
| * Calculate the minimum delay used when scheduling a write-to-read |
| * transision. |
| * @param return minimum delay |
| */ |
| virtual Tick minWriteToReadDataGap(); |
| |
| /** |
| * The memory schduler/arbiter - picks which request needs to |
| * go next, based on the specified policy such as FCFS or FR-FCFS |
| * and moves it to the head of the queue. |
| * Prioritizes accesses to the same rank as previous burst unless |
| * controller is switching command type. |
| * |
| * @param queue Queued requests to consider |
| * @param extra_col_delay Any extra delay due to a read/write switch |
| * @param mem_intr the memory interface to choose from |
| * @return an iterator to the selected packet, else queue.end() |
| */ |
| virtual MemPacketQueue::iterator chooseNext(MemPacketQueue& queue, |
| Tick extra_col_delay, MemInterface* mem_intr); |
| |
| /** |
| * For FR-FCFS policy reorder the read/write queue depending on row buffer |
| * hits and earliest bursts available in memory |
| * |
| * @param queue Queued requests to consider |
| * @param extra_col_delay Any extra delay due to a read/write switch |
| * @return an iterator to the selected packet, else queue.end() |
| */ |
| virtual std::pair<MemPacketQueue::iterator, Tick> |
| chooseNextFRFCFS(MemPacketQueue& queue, Tick extra_col_delay, |
| MemInterface* mem_intr); |
| |
| /** |
| * Calculate burst window aligned tick |
| * |
| * @param cmd_tick Initial tick of command |
| * @return burst window aligned tick |
| */ |
| Tick getBurstWindow(Tick cmd_tick); |
| |
| /** |
| * Used for debugging to observe the contents of the queues. |
| */ |
| void printQs() const; |
| |
| /** |
| * Burst-align an address. |
| * |
| * @param addr The potentially unaligned address |
| * @param mem_intr The DRAM interface this pkt belongs to |
| * |
| * @return An address aligned to a memory burst |
| */ |
| virtual Addr burstAlign(Addr addr, MemInterface* mem_intr) const; |
| |
| /** |
| * Check if mem pkt's size is sane |
| * |
| * @param mem_pkt memory packet |
| * @param mem_intr memory interface |
| * @return An address aligned to a memory burst |
| */ |
| virtual bool pktSizeCheck(MemPacket* mem_pkt, |
| MemInterface* mem_intr) const; |
| |
| /** |
| * The controller's main read and write queues, |
| * with support for QoS reordering |
| */ |
| std::vector<MemPacketQueue> readQueue; |
| std::vector<MemPacketQueue> writeQueue; |
| |
| /** |
| * To avoid iterating over the write queue to check for |
| * overlapping transactions, maintain a set of burst addresses |
| * that are currently queued. Since we merge writes to the same |
| * location we never have more than one address to the same burst |
| * address. |
| */ |
| std::unordered_set<Addr> isInWriteQueue; |
| |
| /** |
| * Response queue where read packets wait after we're done working |
| * with them, but it's not time to send the response yet. The |
| * responses are stored separately mostly to keep the code clean |
| * and help with events scheduling. For all logical purposes such |
| * as sizing the read queue, this and the main read queue need to |
| * be added together. |
| */ |
| std::deque<MemPacket*> respQueue; |
| |
| /** |
| * Holds count of commands issued in burst window starting at |
| * defined Tick. This is used to ensure that the command bandwidth |
| * does not exceed the allowable media constraints. |
| */ |
| std::unordered_multiset<Tick> burstTicks; |
| |
| /** |
| + * Create pointer to interface of the actual memory media when connected |
| + */ |
| MemInterface* dram; |
| |
| virtual AddrRangeList getAddrRanges(); |
| |
| /** |
| * The following are basic design parameters of the memory |
| * controller, and are initialized based on parameter values. |
| * The rowsPerBank is determined based on the capacity, number of |
| * ranks and banks, the burst size, and the row buffer size. |
| */ |
| uint32_t readBufferSize; |
| uint32_t writeBufferSize; |
| uint32_t writeHighThreshold; |
| uint32_t writeLowThreshold; |
| const uint32_t minWritesPerSwitch; |
| const uint32_t minReadsPerSwitch; |
| uint32_t writesThisTime; |
| uint32_t readsThisTime; |
| |
| /** |
| * Memory controller configuration initialized based on parameter |
| * values. |
| */ |
| enums::MemSched memSchedPolicy; |
| |
| /** |
| * Pipeline latency of the controller frontend. The frontend |
| * contribution is added to writes (that complete when they are in |
| * the write buffer) and reads that are serviced the write buffer. |
| */ |
| const Tick frontendLatency; |
| |
| /** |
| * Pipeline latency of the backend and PHY. Along with the |
| * frontend contribution, this latency is added to reads serviced |
| * by the memory. |
| */ |
| const Tick backendLatency; |
| |
| /** |
| * Length of a command window, used to check |
| * command bandwidth |
| */ |
| const Tick commandWindow; |
| |
| /** |
| * Till when must we wait before issuing next RD/WR burst? |
| */ |
| Tick nextBurstAt; |
| |
| Tick prevArrival; |
| |
| /** |
| * The soonest you have to start thinking about the next request |
| * is the longest access time that can occur before |
| * nextBurstAt. Assuming you need to precharge, open a new row, |
| * and access, it is tRP + tRCD + tCL. |
| */ |
| Tick nextReqTime; |
| |
| struct CtrlStats : public statistics::Group |
| { |
| CtrlStats(MemCtrl &ctrl); |
| |
| void regStats() override; |
| |
| MemCtrl &ctrl; |
| |
| // All statistics that the model needs to capture |
| statistics::Scalar readReqs; |
| statistics::Scalar writeReqs; |
| statistics::Scalar readBursts; |
| statistics::Scalar writeBursts; |
| statistics::Scalar servicedByWrQ; |
| statistics::Scalar mergedWrBursts; |
| statistics::Scalar neitherReadNorWriteReqs; |
| // Average queue lengths |
| statistics::Average avgRdQLen; |
| statistics::Average avgWrQLen; |
| |
| statistics::Scalar numRdRetry; |
| statistics::Scalar numWrRetry; |
| statistics::Vector readPktSize; |
| statistics::Vector writePktSize; |
| statistics::Vector rdQLenPdf; |
| statistics::Vector wrQLenPdf; |
| statistics::Histogram rdPerTurnAround; |
| statistics::Histogram wrPerTurnAround; |
| |
| statistics::Scalar bytesReadWrQ; |
| statistics::Scalar bytesReadSys; |
| statistics::Scalar bytesWrittenSys; |
| // Average bandwidth |
| statistics::Formula avgRdBWSys; |
| statistics::Formula avgWrBWSys; |
| |
| statistics::Scalar totGap; |
| statistics::Formula avgGap; |
| |
| // per-requestor bytes read and written to memory |
| statistics::Vector requestorReadBytes; |
| statistics::Vector requestorWriteBytes; |
| |
| // per-requestor bytes read and written to memory rate |
| statistics::Formula requestorReadRate; |
| statistics::Formula requestorWriteRate; |
| |
| // per-requestor read and write serviced memory accesses |
| statistics::Vector requestorReadAccesses; |
| statistics::Vector requestorWriteAccesses; |
| |
| // per-requestor read and write total memory access latency |
| statistics::Vector requestorReadTotalLat; |
| statistics::Vector requestorWriteTotalLat; |
| |
| // per-requestor raed and write average memory access latency |
| statistics::Formula requestorReadAvgLat; |
| statistics::Formula requestorWriteAvgLat; |
| }; |
| |
| CtrlStats stats; |
| |
| /** |
| * Upstream caches need this packet until true is returned, so |
| * hold it for deletion until a subsequent call |
| */ |
| std::unique_ptr<Packet> pendingDelete; |
| |
| /** |
| * Select either the read or write queue |
| * |
| * @param is_read The current burst is a read, select read queue |
| * @return a reference to the appropriate queue |
| */ |
| std::vector<MemPacketQueue>& selQueue(bool is_read) |
| { |
| return (is_read ? readQueue : writeQueue); |
| }; |
| |
| virtual bool respQEmpty() |
| { |
| return respQueue.empty(); |
| } |
| |
| /** |
| * Checks if the memory interface is already busy |
| * |
| * @param mem_intr memory interface to check |
| * @return a boolean indicating if memory is busy |
| */ |
| virtual bool memBusy(MemInterface* mem_intr); |
| |
| /** |
| * Will access memory interface and select non-deterministic |
| * reads to issue |
| * @param mem_intr memory interface to use |
| */ |
| virtual void nonDetermReads(MemInterface* mem_intr); |
| |
| /** |
| * Will check if all writes are for nvm interface |
| * and nvm's write resp queue is full. The generic mem_intr is |
| * used as the same function can be called for a dram interface, |
| * in which case dram functions will eventually return false |
| * @param mem_intr memory interface to use |
| * @return a boolean showing if nvm is blocked with writes |
| */ |
| virtual bool nvmWriteBlock(MemInterface* mem_intr); |
| |
| /** |
| * Remove commands that have already issued from burstTicks |
| */ |
| virtual void pruneBurstTick(); |
| |
| public: |
| |
| MemCtrl(const MemCtrlParams &p); |
| |
| /** |
| * Ensure that all interfaced have drained commands |
| * |
| * @return bool flag, set once drain complete |
| */ |
| virtual bool allIntfDrained() const; |
| |
| DrainState drain() override; |
| |
| /** |
| * Check for command bus contention for single cycle command. |
| * If there is contention, shift command to next burst. |
| * Check verifies that the commands issued per burst is less |
| * than a defined max number, maxCommandsPerWindow. |
| * Therefore, contention per cycle is not verified and instead |
| * is done based on a burst window. |
| * |
| * @param cmd_tick Initial tick of command, to be verified |
| * @param max_cmds_per_burst Number of commands that can issue |
| * in a burst window |
| * @return tick for command issue without contention |
| */ |
| virtual Tick verifySingleCmd(Tick cmd_tick, Tick max_cmds_per_burst, |
| bool row_cmd); |
| |
| /** |
| * Check for command bus contention for multi-cycle (2 currently) |
| * command. If there is contention, shift command(s) to next burst. |
| * Check verifies that the commands issued per burst is less |
| * than a defined max number, maxCommandsPerWindow. |
| * Therefore, contention per cycle is not verified and instead |
| * is done based on a burst window. |
| * |
| * @param cmd_tick Initial tick of command, to be verified |
| * @param max_multi_cmd_split Maximum delay between commands |
| * @param max_cmds_per_burst Number of commands that can issue |
| * in a burst window |
| * @return tick for command issue without contention |
| */ |
| virtual Tick verifyMultiCmd(Tick cmd_tick, Tick max_cmds_per_burst, |
| Tick max_multi_cmd_split = 0); |
| |
| /** |
| * Is there a respondEvent scheduled? |
| * |
| * @return true if event is scheduled |
| */ |
| bool respondEventScheduled() const { return respondEvent.scheduled(); } |
| |
| /** |
| * Is there a read/write burst Event scheduled? |
| * |
| * @return true if event is scheduled |
| */ |
| virtual bool requestEventScheduled(uint8_t pseudo_channel = 0) const |
| { |
| assert(pseudo_channel == 0); |
| return nextReqEvent.scheduled(); |
| } |
| |
| /** |
| * restart the controller |
| * This can be used by interfaces to restart the |
| * scheduler after maintainence commands complete |
| * @param Tick to schedule next event |
| * @param pseudo_channel pseudo channel number for which scheduler |
| * needs to restart, will always be 0 for controllers which control |
| * only a single channel |
| */ |
| virtual void restartScheduler(Tick tick, uint8_t pseudo_channel = 0) |
| { |
| assert(pseudo_channel == 0); |
| schedule(nextReqEvent, tick); |
| } |
| |
| /** |
| * Check the current direction of the memory channel |
| * |
| * @param next_state Check either the current or next bus state |
| * @return True when bus is currently in a read state |
| */ |
| bool inReadBusState(bool next_state) const; |
| |
| /** |
| * Check the current direction of the memory channel |
| * |
| * @param next_state Check either the current or next bus state |
| * @return True when bus is currently in a write state |
| */ |
| bool inWriteBusState(bool next_state) const; |
| |
| Port &getPort(const std::string &if_name, |
| PortID idx=InvalidPortID) override; |
| |
| virtual void init() override; |
| virtual void startup() override; |
| virtual void drainResume() override; |
| |
| protected: |
| |
| virtual Tick recvAtomic(PacketPtr pkt); |
| virtual Tick recvAtomicBackdoor(PacketPtr pkt, MemBackdoorPtr &backdoor); |
| virtual void recvFunctional(PacketPtr pkt); |
| virtual bool recvTimingReq(PacketPtr pkt); |
| |
| bool recvFunctionalLogic(PacketPtr pkt, MemInterface* mem_intr); |
| Tick recvAtomicLogic(PacketPtr pkt, MemInterface* mem_intr); |
| |
| }; |
| |
| } // namespace memory |
| } // namespace gem5 |
| |
| #endif //__MEM_CTRL_HH__ |
