blob: 354c8efc9838edff36f014e92b912885813555b9 [file] [log] [blame]
# Copyright (c) 2020 ARM Limited
# All rights reserved
#
# The license below extends only to copyright in the software and shall
# not be construed as granting a license to any other intellectual
# property including but not limited to intellectual property relating
# to a hardware implementation of the functionality of the software
# licensed hereunder. You may use the software subject to the license
# terms below provided that you ensure that this notice is replicated
# unmodified and in its entirety in all distributions of the software,
# modified or unmodified, in source code or in binary form.
#
# Copyright (c) 2017 Mark D. Hill and David A. Wood
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
import os
import copy
import subprocess
import sys
from testlib.test_util import TestFunction
from testlib.suite import TestSuite
from testlib.helper import log_call
from testlib.configuration import constants, config
from .fixture import TempdirFixture, Gem5Fixture, VariableFixture
from . import verifier
def gem5_verify_config(name,
config,
config_args,
verifiers,
gem5_args=tuple(),
fixtures=[],
valid_isas=constants.supported_isas,
valid_variants=constants.supported_variants,
length=constants.supported_lengths[0],
valid_hosts=constants.supported_hosts,
protocol=None,
uses_kvm=False,
):
'''
Helper class to generate common gem5 tests using verifiers.
The generated TestSuite will run gem5 with the provided config and
config_args. After that it will run any provided verifiers to verify
details about the gem5 run.
.. seealso:: For the verifiers see :mod:`testlib.gem5.verifier`
:param name: Name of the test.
:param config: The config to give gem5.
:param config_args: A list of arguments to pass to the given config.
:param verifiers: An iterable with Verifier instances which will be placed
into a suite that will be ran after a gem5 run.
:param gem5_args: An iterable with arguments to give to gem5. (Arguments
that would normally go before the config path.)
:param valid_isas: An iterable with the isas that this test can be ran
for. If None given, will run for all supported_isas.
:param valid_variants: An iterable with the variant levels that
this test can be ran for. (E.g. opt, debug)
:param uses_kvm: States if this verifier uses KVM. If so, the "kvm" tag
will be included.
'''
fixtures = list(fixtures)
testsuites = []
for host in valid_hosts:
for opt in valid_variants:
for isa in valid_isas:
# Create a tempdir fixture to be shared throughout the test.
tempdir = TempdirFixture()
gem5_returncode = VariableFixture(
name=constants.gem5_returncode_fixture_name)
# Common name of this generated testcase.
_name = '{given_name}-{isa}-{host}-{opt}'.format(
given_name=name,
isa=isa,
host=host,
opt=opt)
if protocol:
_name += '-'+protocol
# Create the running of gem5 subtest. NOTE: We specifically
# create this test before our verifiers so this is listed
# first.
tests = []
gem5_execution = TestFunction(
_create_test_run_gem5(config, config_args, gem5_args),
name=_name)
tests.append(gem5_execution)
# Create copies of the verifier subtests for this isa and
# variant.
for verifier in verifiers:
tests.append(verifier.instantiate_test(_name))
# Add the isa and variant to tags list.
tags = [isa, opt, length, host]
if uses_kvm:
tags.append(constants.kvm_tag)
# Create the gem5 target for the specific architecture and
# variant.
_fixtures = copy.copy(fixtures)
_fixtures.append(Gem5Fixture(isa, opt, protocol))
_fixtures.append(tempdir)
_fixtures.append(gem5_returncode)
# Finally construct the self contained TestSuite out of our
# tests.
testsuites.append(TestSuite(
name=_name,
fixtures=_fixtures,
tags=tags,
tests=tests))
return testsuites
def _create_test_run_gem5(config, config_args, gem5_args):
def test_run_gem5(params):
'''
Simple \'test\' which runs gem5 and saves the result into a tempdir.
NOTE: Requires fixtures: tempdir, gem5
'''
fixtures = params.fixtures
if gem5_args is None:
_gem5_args = tuple()
elif isinstance(gem5_args, str):
# If just a single str, place it in an iterable
_gem5_args = (gem5_args,)
else:
_gem5_args = gem5_args
# FIXME/TODO: I don't like the idea of having to modify this test run
# or always collect results even if not using a verifier. There should
# be some configuration in here that only gathers certain results for
# certain verifiers.
#
# I.E. Only the returncode verifier will use the gem5_returncode
# fixture, but we always require it even if that verifier isn't being
# ran.
tempdir = fixtures[constants.tempdir_fixture_name].path
gem5 = fixtures[constants.gem5_binary_fixture_name].path
command = [
gem5,
'-d', # Set redirect dir to tempdir.
tempdir,
'-re', # TODO: Change to const. Redirect stdout and stderr
'--silent-redirect',
]
command.extend(_gem5_args)
command.append(config)
# Config_args should set up the program args.
command.extend(config_args)
log_call(params.log, command, time=params.time,
stdout=sys.stdout, stderr=sys.stderr)
return test_run_gem5