blob: fd363193635dea81adef92b9e95e1d5501262ffb [file] [log] [blame]
# Copyright (c) 2016-2017, 2020-2022 Arm Limited
# All rights reserved.
#
# The license below extends only to copyright in the software and shall
# not be construed as granting a license to any other intellectual
# property including but not limited to intellectual property relating
# to a hardware implementation of the functionality of the software
# licensed hereunder. You may use the software subject to the license
# terms below provided that you ensure that this notice is replicated
# unmodified and in its entirety in all distributions of the software,
# modified or unmodified, in source code or in binary form.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
import os
import m5
from m5.util import addToPath
from m5.objects import *
from m5.options import *
import argparse
m5.util.addToPath("../..")
from common import MemConfig
from common import ObjectList
from common import Options
from common import SysPaths
from common.cores.arm import O3_ARM_v7a, HPI
from ruby import Ruby
import devices
default_kernel = "vmlinux.arm64"
default_disk = "linaro-minimal-aarch64.img"
default_root_device = "/dev/vda1"
# Pre-defined CPU configurations.
cpu_types = {
"noncaching": NonCachingSimpleCPU,
"minor": MinorCPU,
"hpi": HPI.HPI,
"o3": O3_ARM_v7a.O3_ARM_v7a_3,
}
def create_cow_image(name):
"""Helper function to create a Copy-on-Write disk image"""
image = CowDiskImage()
image.child.image_file = SysPaths.disk(name)
return image
def config_ruby(system, args):
cpus = []
for cluster in system.cpu_cluster:
for cpu in cluster.cpus:
cpus.append(cpu)
Ruby.create_system(
args,
True,
system,
system.iobus,
system._dma_ports,
system.realview.bootmem,
cpus,
)
# Create a seperate clock domain for Ruby
system.ruby.clk_domain = SrcClockDomain(
clock=args.ruby_clock, voltage_domain=system.voltage_domain
)
def create(args):
"""Create and configure the system object."""
if args.script and not os.path.isfile(args.script):
print("Error: Bootscript %s does not exist" % args.script)
sys.exit(1)
cpu_class = cpu_types[args.cpu]
mem_mode = cpu_class.memory_mode()
system = devices.ArmRubySystem(
args.mem_size,
mem_mode=mem_mode,
workload=ArmFsLinux(object_file=SysPaths.binary(args.kernel)),
readfile=args.script,
)
# Add CPU clusters to the system
system.cpu_cluster = [
devices.ArmCpuCluster(
system,
args.num_cpus,
args.cpu_freq,
"1.0V",
cpu_class,
None,
None,
None,
)
]
# Add the PCI devices we need for this system. The base system
# doesn't have any PCI devices by default since they are assumed
# to be added by the configuration scripts needing them.
system.pci_devices = [
# Create a VirtIO block device for the system's boot
# disk. Attach the disk image using gem5's Copy-on-Write
# functionality to avoid writing changes to the stored copy of
# the disk image.
PciVirtIO(vio=VirtIOBlock(image=create_cow_image(args.disk_image)))
]
# Attach the PCI devices to the system. The helper method in the
# system assigns a unique PCI bus ID to each of the devices and
# connects them to the IO bus.
for dev in system.pci_devices:
system.attach_pci(dev)
config_ruby(system, args)
# Wire up the system's memory system
system.connect()
# Setup gem5's minimal Linux boot loader.
system.realview.setupBootLoader(system, SysPaths.binary)
if args.dtb:
system.workload.dtb_filename = args.dtb
else:
# No DTB specified: autogenerate DTB
system.workload.dtb_filename = os.path.join(
m5.options.outdir, "system.dtb"
)
system.generateDtb(system.workload.dtb_filename)
# Linux boot command flags
kernel_cmd = [
# Tell Linux to use the simulated serial port as a console
"console=ttyAMA0",
# Hard-code timi
"lpj=19988480",
# Disable address space randomisation to get a consistent
# memory layout.
"norandmaps",
# Tell Linux where to find the root disk image.
"root=%s" % args.root_device,
# Mount the root disk read-write by default.
"rw",
# Tell Linux about the amount of physical memory present.
"mem=%s" % args.mem_size,
]
system.workload.command_line = " ".join(kernel_cmd)
return system
def run(args):
cptdir = m5.options.outdir
if args.checkpoint:
print("Checkpoint directory: %s" % cptdir)
while True:
event = m5.simulate()
exit_msg = event.getCause()
if exit_msg == "checkpoint":
print("Dropping checkpoint at tick %d" % m5.curTick())
cpt_dir = os.path.join(m5.options.outdir, "cpt.%d" % m5.curTick())
m5.checkpoint(os.path.join(cpt_dir))
print("Checkpoint done.")
else:
print(exit_msg, " @ ", m5.curTick())
break
sys.exit(event.getCode())
def main():
parser = argparse.ArgumentParser()
parser.add_argument(
"--dtb", type=str, default=None, help="DTB file to load"
)
parser.add_argument(
"--kernel", type=str, default=default_kernel, help="Linux kernel"
)
parser.add_argument(
"--disk-image",
type=str,
default=default_disk,
help="Disk to instantiate",
)
parser.add_argument(
"--root-device",
type=str,
default=default_root_device,
help="OS device name for root partition (default: {})".format(
default_root_device
),
)
parser.add_argument(
"--script", type=str, default="", help="Linux bootscript"
)
parser.add_argument(
"--cpu",
choices=list(cpu_types.keys()),
default="minor",
help="CPU model to use",
)
parser.add_argument("--cpu-freq", type=str, default="4GHz")
parser.add_argument("-n", "--num-cpus", type=int, default=1)
parser.add_argument("--checkpoint", action="store_true")
parser.add_argument("--restore", type=str, default=None)
parser.add_argument(
"--mem-type",
default="DDR3_1600_8x8",
choices=ObjectList.mem_list.get_names(),
help="type of memory to use",
)
parser.add_argument(
"--mem-channels", type=int, default=1, help="number of memory channels"
)
parser.add_argument(
"--mem-ranks",
type=int,
default=None,
help="number of memory ranks per channel",
)
parser.add_argument(
"--mem-size",
action="store",
type=str,
default="2GiB",
help="Specify the physical memory size (single memory)",
)
parser.add_argument(
"--enable-dram-powerdown",
action="store_true",
help="Enable low-power states in DRAMInterface",
)
parser.add_argument(
"--mem-channels-intlv",
type=int,
default=0,
help="Memory channels interleave",
)
parser.add_argument("--num-dirs", type=int, default=1)
parser.add_argument("--num-l2caches", type=int, default=1)
parser.add_argument("--num-l3caches", type=int, default=1)
parser.add_argument("--l1d_size", type=str, default="64kB")
parser.add_argument("--l1i_size", type=str, default="32kB")
parser.add_argument("--l2_size", type=str, default="2MB")
parser.add_argument("--l3_size", type=str, default="16MB")
parser.add_argument("--l1d_assoc", type=int, default=2)
parser.add_argument("--l1i_assoc", type=int, default=2)
parser.add_argument("--l2_assoc", type=int, default=8)
parser.add_argument("--l3_assoc", type=int, default=16)
parser.add_argument("--cacheline_size", type=int, default=64)
Ruby.define_options(parser)
args = parser.parse_args()
root = Root(full_system=True)
root.system = create(args)
if args.restore is not None:
m5.instantiate(args.restore)
else:
m5.instantiate()
run(args)
if __name__ == "__m5_main__":
main()