| /* |
| * Copyright (c) 2015-2018 Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * For use for simulation and test purposes only |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * 3. Neither the name of the copyright holder nor the names of its |
| * contributors may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Authors: Eric van Tassell |
| */ |
| |
| #ifndef __DEV_HSA_HSA_PACKET_PROCESSOR__ |
| #define __DEV_HSA_HSA_PACKET_PROCESSOR__ |
| |
| #include <cstdint> |
| |
| #include <queue> |
| |
| #include "dev/dma_device.hh" |
| #include "dev/hsa/hsa.h" |
| #include "dev/hsa/hsa_queue.hh" |
| #include "params/HSAPacketProcessor.hh" |
| |
| #define AQL_PACKET_SIZE 64 |
| #define PAGE_SIZE 4096 |
| #define NUM_DMA_BUFS 16 |
| #define DMA_BUF_SIZE (AQL_PACKET_SIZE * NUM_DMA_BUFS) |
| // HSA runtime supports only 5 signals per barrier packet |
| #define NumSignalsPerBarrier 5 |
| |
| // This define is copied from hsa runtime (libhsakmt/src/libhsakmt.h) |
| // This is the mapping function used by runtime for mapping |
| // queueID to dooorbell address |
| #define VOID_PTR_ADD32(ptr,n) (void*)((uint32_t*)(ptr) + n)/*ptr + offset*/ |
| |
| class HSADevice; |
| class HWScheduler; |
| |
| // Our internal representation of an HSA queue |
| class HSAQueueDescriptor { |
| public: |
| uint64_t basePointer; |
| uint64_t doorbellPointer; |
| uint64_t writeIndex; |
| uint64_t readIndex; |
| uint32_t numElts; |
| uint64_t hostReadIndexPtr; |
| bool stalledOnDmaBufAvailability; |
| bool dmaInProgress; |
| |
| HSAQueueDescriptor(uint64_t base_ptr, uint64_t db_ptr, |
| uint64_t hri_ptr, uint32_t size) |
| : basePointer(base_ptr), doorbellPointer(db_ptr), |
| writeIndex(0), readIndex(0), |
| numElts(size), hostReadIndexPtr(hri_ptr), |
| stalledOnDmaBufAvailability(false), |
| dmaInProgress(false) |
| { } |
| uint64_t spaceRemaining() { return numElts - (writeIndex - readIndex); } |
| uint64_t spaceUsed() { return writeIndex - readIndex; } |
| uint32_t objSize() { return AQL_PACKET_SIZE; } |
| uint32_t numObjs() { return numElts; } |
| bool isFull() { return spaceRemaining() == 0; } |
| bool isEmpty() { return spaceRemaining() == numElts; } |
| |
| uint64_t ptr(uint64_t ix) |
| { |
| return basePointer + |
| ((ix % numElts) * objSize()); |
| } |
| }; |
| |
| /** |
| * Internal ring buffer which is used to prefetch/store copies of the |
| * in-memory HSA ring buffer. Each packet in the queue has three implicit |
| * states tracked by a packet's relative location to the write, read, and |
| * dispatch pointers. |
| * |
| * FREE: Entry is empty |
| * ALLOCATED: Entry has been allocated for a packet, but the DMA has not |
| * yet completed |
| * SUBMITTED: Packet has been submitted to the HSADevice, but has not |
| * yet completed |
| */ |
| class AQLRingBuffer |
| { |
| private: |
| std::vector<hsa_kernel_dispatch_packet_t> _aqlBuf; |
| std::string _name; |
| std::vector<Addr> _hostDispAddresses; |
| std::vector<bool> _aqlComplete; |
| uint64_t _wrIdx; // Points to next write location |
| uint64_t _rdIdx; // Read pointer of AQL buffer |
| uint64_t _dispIdx; // Dispatch pointer of AQL buffer |
| |
| public: |
| std::string name() {return _name;} |
| AQLRingBuffer(uint32_t size, const std::string name); |
| int allocEntry(uint32_t nBufReq); |
| bool freeEntry(void *pkt); |
| |
| /** |
| * the kernel may try to read from the dispatch packet, |
| * so we need to keep the host address that corresponds |
| * to each of the dispatch packets this AQL buffer is |
| * storing. when we call submitPkt(), we send along the |
| * corresponding host address for the packet so the |
| * wavefront can properly initialize its SGPRs - which |
| * may include a pointer to the dispatch packet |
| */ |
| void |
| saveHostDispAddr(Addr host_pkt_addr, int num_pkts, int ix) |
| { |
| for (int i = 0; i < num_pkts; ++i) { |
| _hostDispAddresses[ix % numObjs()] = host_pkt_addr + i * objSize(); |
| ++ix; |
| } |
| } |
| |
| Addr |
| hostDispAddr() const |
| { |
| return _hostDispAddresses[dispIdx() % numObjs()]; |
| } |
| |
| bool |
| dispPending() const |
| { |
| int packet_type = (_aqlBuf[_dispIdx % _aqlBuf.size()].header |
| >> HSA_PACKET_HEADER_TYPE) & |
| ((1 << HSA_PACKET_HEADER_WIDTH_TYPE) - 1); |
| return (_dispIdx < _wrIdx) && packet_type != HSA_PACKET_TYPE_INVALID; |
| } |
| |
| uint32_t nFree() const { return _aqlBuf.size() - (_wrIdx - _rdIdx); } |
| void *ptr(uint32_t ix) { return _aqlBuf.data() + (ix % _aqlBuf.size()); } |
| uint32_t numObjs() const { return _aqlBuf.size(); }; |
| uint32_t objSize() const { return AQL_PACKET_SIZE; } |
| uint64_t dispIdx() const { return _dispIdx; } |
| uint64_t wrIdx() const { return _wrIdx; } |
| uint64_t rdIdx() const { return _rdIdx; } |
| uint64_t* rdIdxPtr() { return &_rdIdx; } |
| void incRdIdx(uint64_t value) { _rdIdx += value; } |
| void incWrIdx(uint64_t value) { _wrIdx += value; } |
| void incDispIdx(uint64_t value) { _dispIdx += value; } |
| |
| }; |
| |
| typedef struct QueueContext { |
| HSAQueueDescriptor* qDesc; |
| AQLRingBuffer* aqlBuf; |
| QueueContext(HSAQueueDescriptor* q_desc, |
| AQLRingBuffer* aql_buf) |
| : qDesc(q_desc), aqlBuf(aql_buf) |
| {} |
| QueueContext() : qDesc(NULL), aqlBuf(NULL) {} |
| } QCntxt; |
| |
| class HSAPacketProcessor: public DmaDevice |
| { |
| friend class HWScheduler; |
| protected: |
| typedef void (DmaDevice::*DmaFnPtr)(Addr, int, Event*, uint8_t*, Tick); |
| HSADevice *hsa_device; |
| HWScheduler *hwSchdlr; |
| |
| // Structure to store the read values of dependency signals |
| // from shared memory. Also used for tracking the status of |
| // those reads while they are in progress |
| class SignalState |
| { |
| public: |
| SignalState() |
| : pendingReads(0), allRead(false), discardRead(false) |
| { |
| values.resize(NumSignalsPerBarrier); |
| } |
| void handleReadDMA(); |
| int pendingReads; |
| bool allRead; |
| // If this queue is unmapped when there are pending reads, then |
| // the pending reads has to be discarded. |
| bool discardRead; |
| // values stores the value of already read dependency signal |
| std::vector<hsa_signal_value_t> values; |
| void |
| resetSigVals() |
| { |
| std::fill(values.begin(), values.end(), 1); |
| } |
| }; |
| |
| class QueueProcessEvent : public Event |
| { |
| private: |
| HSAPacketProcessor *hsaPP; |
| uint32_t rqIdx; |
| public: |
| QueueProcessEvent(HSAPacketProcessor *_hsaPP, uint32_t _rqIdx) |
| : Event(Default_Pri), hsaPP(_hsaPP), rqIdx(_rqIdx) |
| {} |
| virtual void process(); |
| virtual const char *description() const; |
| }; |
| |
| // Registered queue list entry; each entry has one queueDescriptor and |
| // associated AQL buffer |
| class RQLEntry |
| { |
| public: |
| RQLEntry(HSAPacketProcessor *hsaPP, uint32_t rqIdx) |
| : aqlProcessEvent(hsaPP, rqIdx) {} |
| QCntxt qCntxt; |
| bool dispPending() { return qCntxt.aqlBuf->dispPending() > 0; } |
| SignalState depSignalRdState; |
| QueueProcessEvent aqlProcessEvent; |
| }; |
| // Keeps track of queueDescriptors of registered queues |
| std::vector<class RQLEntry *> regdQList; |
| |
| void translateOrDie(Addr vaddr, Addr &paddr); |
| void dmaVirt(DmaFnPtr, Addr host_addr, unsigned size, Event *event, |
| void *data, Tick delay = 0); |
| |
| void dmaReadVirt(Addr host_addr, unsigned size, Event *event, |
| void *data, Tick delay = 0); |
| |
| void dmaWriteVirt(Addr host_addr, unsigned size, Event *event, |
| void *data, Tick delay = 0); |
| bool processPkt(void* pkt, uint32_t rl_idx, Addr host_pkt_addr); |
| void displayQueueDescriptor(int pid, uint32_t rl_idx); |
| |
| public: |
| HSAQueueDescriptor* |
| getQueueDesc(uint32_t queId) |
| { |
| return regdQList.at(queId)->qCntxt.qDesc; |
| } |
| class RQLEntry* |
| getRegdListEntry(uint32_t queId) |
| { |
| return regdQList.at(queId); |
| } |
| |
| int numHWQueues; |
| Addr pioAddr; |
| Addr pioSize; |
| Tick pioDelay; |
| const Tick pktProcessDelay; |
| |
| typedef HSAPacketProcessorParams Params; |
| HSAPacketProcessor(const Params *p); |
| ~HSAPacketProcessor(); |
| void setDeviceQueueDesc(uint64_t hostReadIndexPointer, |
| uint64_t basePointer, |
| uint64_t queue_id, |
| uint32_t size); |
| void unsetDeviceQueueDesc(uint64_t queue_id); |
| void setDevice(HSADevice * dev); |
| void updateReadIndex(int, uint32_t); |
| void getCommandsFromHost(int pid, uint32_t rl_idx); |
| |
| // PIO interface |
| virtual Tick read(Packet*); |
| virtual Tick write(Packet*); |
| virtual AddrRangeList getAddrRanges() const; |
| void finishPkt(void *pkt, uint32_t rl_idx); |
| void finishPkt(void *pkt) { finishPkt(pkt, 0); } |
| void schedAQLProcessing(uint32_t rl_idx); |
| |
| class DepSignalsReadDmaEvent : public Event |
| { |
| protected: |
| SignalState *signalState; |
| public: |
| DepSignalsReadDmaEvent(SignalState *ss) |
| : Event(Default_Pri, AutoDelete), signalState(ss) |
| {} |
| virtual void process() { signalState->handleReadDMA(); } |
| virtual const char *description() const; |
| }; |
| |
| /** |
| * this event is used to update the read_disp_id field (the read pointer) |
| * of the MQD, which is how the host code knows the status of the HQD's |
| * read pointer |
| */ |
| class UpdateReadDispIdDmaEvent : public Event |
| { |
| public: |
| UpdateReadDispIdDmaEvent(); |
| |
| void process() override { } |
| const char *description() const override; |
| |
| }; |
| |
| /** |
| * Calls getCurrentEntry once the queueEntry has been dmaRead. |
| */ |
| struct dma_series_ctx { |
| // deal with the fact dma ops can complete out of issue order |
| uint32_t pkts_ttl; |
| uint32_t pkts_2_go; |
| uint32_t start_ix; |
| uint32_t rl_idx; |
| |
| dma_series_ctx(uint32_t _pkts_ttl, |
| uint32_t _pkts_2_go, |
| uint32_t _start_ix, |
| uint32_t _rl_idx) |
| : pkts_ttl(_pkts_2_go), pkts_2_go(_pkts_2_go), |
| start_ix(_start_ix), rl_idx(_rl_idx) |
| {}; |
| ~dma_series_ctx() {}; |
| }; |
| |
| class CmdQueueCmdDmaEvent : public Event |
| { |
| protected: |
| HSAPacketProcessor *hsaPP; |
| int pid; |
| bool isRead; |
| uint32_t ix_start; |
| uint num_pkts; |
| dma_series_ctx *series_ctx; |
| void *dest_4debug; |
| |
| public: |
| CmdQueueCmdDmaEvent(HSAPacketProcessor *hsaPP, int pid, bool isRead, |
| uint32_t dma_buf_ix, uint num_bufs, |
| dma_series_ctx *series_ctx, void *dest_4debug); |
| virtual void process(); |
| virtual const char *description() const; |
| }; |
| }; |
| |
| #endif // __DEV_HSA_HSA_PACKET_PROCESSOR__ |