| /* |
| * Copyright (c) 2015-2017 ARM Limited |
| * All rights reserved |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "arch/arm/kvm/gic.hh" |
| |
| #include <linux/kvm.h> |
| |
| #include "arch/arm/kvm/base_cpu.hh" |
| #include "debug/GIC.hh" |
| #include "debug/Interrupt.hh" |
| #include "params/MuxingKvmGic.hh" |
| |
| KvmKernelGicV2::KvmKernelGicV2(KvmVM &_vm, Addr cpu_addr, Addr dist_addr, |
| unsigned it_lines) |
| : cpuRange(RangeSize(cpu_addr, KVM_VGIC_V2_CPU_SIZE)), |
| distRange(RangeSize(dist_addr, KVM_VGIC_V2_DIST_SIZE)), |
| vm(_vm), |
| kdev(vm.createDevice(KVM_DEV_TYPE_ARM_VGIC_V2)) |
| { |
| // Tell the VM that we will emulate the GIC in the kernel. This |
| // disables IRQ and FIQ handling in the KVM CPU model. |
| vm.enableKernelIRQChip(); |
| |
| kdev.setAttr<uint64_t>( |
| KVM_DEV_ARM_VGIC_GRP_ADDR, KVM_VGIC_V2_ADDR_TYPE_DIST, dist_addr); |
| kdev.setAttr<uint64_t>( |
| KVM_DEV_ARM_VGIC_GRP_ADDR, KVM_VGIC_V2_ADDR_TYPE_CPU, cpu_addr); |
| |
| kdev.setAttr<uint32_t>(KVM_DEV_ARM_VGIC_GRP_NR_IRQS, 0, it_lines); |
| } |
| |
| KvmKernelGicV2::~KvmKernelGicV2() |
| { |
| } |
| |
| void |
| KvmKernelGicV2::setSPI(unsigned spi) |
| { |
| setIntState(KVM_ARM_IRQ_TYPE_SPI, 0, spi, true); |
| } |
| |
| void |
| KvmKernelGicV2::clearSPI(unsigned spi) |
| { |
| setIntState(KVM_ARM_IRQ_TYPE_SPI, 0, spi, false); |
| } |
| |
| void |
| KvmKernelGicV2::setPPI(unsigned vcpu, unsigned ppi) |
| { |
| setIntState(KVM_ARM_IRQ_TYPE_PPI, vcpu, ppi, true); |
| } |
| |
| void |
| KvmKernelGicV2::clearPPI(unsigned vcpu, unsigned ppi) |
| { |
| setIntState(KVM_ARM_IRQ_TYPE_PPI, vcpu, ppi, false); |
| } |
| |
| void |
| KvmKernelGicV2::setIntState(unsigned type, unsigned vcpu, unsigned irq, |
| bool high) |
| { |
| assert(type <= KVM_ARM_IRQ_TYPE_MASK); |
| assert(vcpu <= KVM_ARM_IRQ_VCPU_MASK); |
| assert(irq <= KVM_ARM_IRQ_NUM_MASK); |
| const uint32_t line( |
| (type << KVM_ARM_IRQ_TYPE_SHIFT) | |
| (vcpu << KVM_ARM_IRQ_VCPU_SHIFT) | |
| (irq << KVM_ARM_IRQ_NUM_SHIFT)); |
| |
| vm.setIRQLine(line, high); |
| } |
| |
| uint32_t |
| KvmKernelGicV2::getGicReg(unsigned group, unsigned vcpu, unsigned offset) |
| { |
| uint64_t reg; |
| |
| assert(vcpu <= KVM_ARM_IRQ_VCPU_MASK); |
| const uint64_t attr( |
| ((uint64_t)vcpu << KVM_DEV_ARM_VGIC_CPUID_SHIFT) | |
| (offset << KVM_DEV_ARM_VGIC_OFFSET_SHIFT)); |
| |
| kdev.getAttrPtr(group, attr, ®); |
| return (uint32_t) reg; |
| } |
| |
| void |
| KvmKernelGicV2::setGicReg(unsigned group, unsigned vcpu, unsigned offset, |
| unsigned value) |
| { |
| uint64_t reg = value; |
| |
| assert(vcpu <= KVM_ARM_IRQ_VCPU_MASK); |
| const uint64_t attr( |
| ((uint64_t)vcpu << KVM_DEV_ARM_VGIC_CPUID_SHIFT) | |
| (offset << KVM_DEV_ARM_VGIC_OFFSET_SHIFT)); |
| |
| kdev.setAttrPtr(group, attr, ®); |
| } |
| |
| uint32_t |
| KvmKernelGicV2::readDistributor(ContextID ctx, Addr daddr) |
| { |
| auto vcpu = vm.contextIdToVCpuId(ctx); |
| return getGicReg(KVM_DEV_ARM_VGIC_GRP_DIST_REGS, vcpu, daddr); |
| } |
| |
| uint32_t |
| KvmKernelGicV2::readCpu(ContextID ctx, Addr daddr) |
| { |
| auto vcpu = vm.contextIdToVCpuId(ctx); |
| return getGicReg(KVM_DEV_ARM_VGIC_GRP_CPU_REGS, vcpu, daddr); |
| } |
| |
| void |
| KvmKernelGicV2::writeDistributor(ContextID ctx, Addr daddr, uint32_t data) |
| { |
| auto vcpu = vm.contextIdToVCpuId(ctx); |
| setGicReg(KVM_DEV_ARM_VGIC_GRP_DIST_REGS, vcpu, daddr, data); |
| } |
| |
| void |
| KvmKernelGicV2::writeCpu(ContextID ctx, Addr daddr, uint32_t data) |
| { |
| auto vcpu = vm.contextIdToVCpuId(ctx); |
| setGicReg(KVM_DEV_ARM_VGIC_GRP_CPU_REGS, vcpu, daddr, data); |
| } |
| |
| |
| |
| MuxingKvmGic::MuxingKvmGic(const MuxingKvmGicParams *p) |
| : GicV2(p), |
| system(*p->system), |
| kernelGic(nullptr), |
| usingKvm(false) |
| { |
| if (auto vm = system.getKvmVM()) { |
| kernelGic = new KvmKernelGicV2(*vm, p->cpu_addr, p->dist_addr, |
| p->it_lines); |
| } |
| } |
| |
| MuxingKvmGic::~MuxingKvmGic() |
| { |
| } |
| |
| void |
| MuxingKvmGic::startup() |
| { |
| GicV2::startup(); |
| usingKvm = (kernelGic != nullptr) && system.validKvmEnvironment(); |
| if (usingKvm) |
| fromGicV2ToKvm(); |
| } |
| |
| DrainState |
| MuxingKvmGic::drain() |
| { |
| if (usingKvm) |
| fromKvmToGicV2(); |
| return GicV2::drain(); |
| } |
| |
| void |
| MuxingKvmGic::drainResume() |
| { |
| GicV2::drainResume(); |
| bool use_kvm = (kernelGic != nullptr) && system.validKvmEnvironment(); |
| if (use_kvm != usingKvm) { |
| // Should only occur due to CPU switches |
| if (use_kvm) // from simulation to KVM emulation |
| fromGicV2ToKvm(); |
| // otherwise, drain() already sync'd the state back to the GicV2 |
| |
| usingKvm = use_kvm; |
| } |
| } |
| |
| Tick |
| MuxingKvmGic::read(PacketPtr pkt) |
| { |
| if (!usingKvm) |
| return GicV2::read(pkt); |
| |
| panic("MuxingKvmGic: PIO from gem5 is currently unsupported\n"); |
| } |
| |
| Tick |
| MuxingKvmGic::write(PacketPtr pkt) |
| { |
| if (!usingKvm) |
| return GicV2::write(pkt); |
| |
| panic("MuxingKvmGic: PIO from gem5 is currently unsupported\n"); |
| } |
| |
| void |
| MuxingKvmGic::sendInt(uint32_t num) |
| { |
| if (!usingKvm) |
| return GicV2::sendInt(num); |
| |
| DPRINTF(Interrupt, "Set SPI %d\n", num); |
| kernelGic->setSPI(num); |
| } |
| |
| void |
| MuxingKvmGic::clearInt(uint32_t num) |
| { |
| if (!usingKvm) |
| return GicV2::clearInt(num); |
| |
| DPRINTF(Interrupt, "Clear SPI %d\n", num); |
| kernelGic->clearSPI(num); |
| } |
| |
| void |
| MuxingKvmGic::sendPPInt(uint32_t num, uint32_t cpu) |
| { |
| if (!usingKvm) |
| return GicV2::sendPPInt(num, cpu); |
| DPRINTF(Interrupt, "Set PPI %d:%d\n", cpu, num); |
| kernelGic->setPPI(cpu, num); |
| } |
| |
| void |
| MuxingKvmGic::clearPPInt(uint32_t num, uint32_t cpu) |
| { |
| if (!usingKvm) |
| return GicV2::clearPPInt(num, cpu); |
| |
| DPRINTF(Interrupt, "Clear PPI %d:%d\n", cpu, num); |
| kernelGic->clearPPI(cpu, num); |
| } |
| |
| void |
| MuxingKvmGic::updateIntState(int hint) |
| { |
| // During Kvm->GicV2 state transfer, writes to the GicV2 will call |
| // updateIntState() which can post an interrupt. Since we're only |
| // using the GicV2 model for holding state in this circumstance, we |
| // short-circuit this behavior, as the GicV2 is not actually active. |
| if (!usingKvm) |
| return GicV2::updateIntState(hint); |
| } |
| |
| void |
| MuxingKvmGic::copyDistRegister(BaseGicRegisters* from, BaseGicRegisters* to, |
| ContextID ctx, Addr daddr) |
| { |
| auto val = from->readDistributor(ctx, daddr); |
| DPRINTF(GIC, "copy dist 0x%x 0x%08x\n", daddr, val); |
| to->writeDistributor(ctx, daddr, val); |
| } |
| |
| void |
| MuxingKvmGic::copyCpuRegister(BaseGicRegisters* from, BaseGicRegisters* to, |
| ContextID ctx, Addr daddr) |
| { |
| auto val = from->readCpu(ctx, daddr); |
| DPRINTF(GIC, "copy cpu 0x%x 0x%08x\n", daddr, val); |
| to->writeCpu(ctx, daddr, val); |
| } |
| |
| void |
| MuxingKvmGic::copyBankedDistRange(BaseGicRegisters* from, BaseGicRegisters* to, |
| Addr daddr, size_t size) |
| { |
| for (int ctx = 0; ctx < system.threads.size(); ++ctx) |
| for (auto a = daddr; a < daddr + size; a += 4) |
| copyDistRegister(from, to, ctx, a); |
| } |
| |
| void |
| MuxingKvmGic::clearBankedDistRange(BaseGicRegisters* to, |
| Addr daddr, size_t size) |
| { |
| for (int ctx = 0; ctx < system.threads.size(); ++ctx) |
| for (auto a = daddr; a < daddr + size; a += 4) |
| to->writeDistributor(ctx, a, 0xFFFFFFFF); |
| } |
| |
| void |
| MuxingKvmGic::copyDistRange(BaseGicRegisters* from, BaseGicRegisters* to, |
| Addr daddr, size_t size) |
| { |
| for (auto a = daddr; a < daddr + size; a += 4) |
| copyDistRegister(from, to, 0, a); |
| } |
| |
| void |
| MuxingKvmGic::clearDistRange(BaseGicRegisters* to, |
| Addr daddr, size_t size) |
| { |
| for (auto a = daddr; a < daddr + size; a += 4) |
| to->writeDistributor(0, a, 0xFFFFFFFF); |
| } |
| |
| void |
| MuxingKvmGic::copyGicState(BaseGicRegisters* from, BaseGicRegisters* to) |
| { |
| Addr set, clear; |
| size_t size; |
| |
| /// CPU state (GICC_*) |
| // Copy CPU Interface Control Register (CTLR), |
| // Interrupt Priority Mask Register (PMR), and |
| // Binary Point Register (BPR) |
| for (int ctx = 0; ctx < system.threads.size(); ++ctx) { |
| copyCpuRegister(from, to, ctx, GICC_CTLR); |
| copyCpuRegister(from, to, ctx, GICC_PMR); |
| copyCpuRegister(from, to, ctx, GICC_BPR); |
| } |
| |
| |
| /// Distributor state (GICD_*) |
| // Copy Distributor Control Register (CTLR) |
| copyDistRegister(from, to, 0, GICD_CTLR); |
| |
| // Copy interrupt-enabled statuses (I[CS]ENABLERn; R0 is per-CPU banked) |
| set = GicV2::GICD_ISENABLER.start(); |
| clear = GicV2::GICD_ICENABLER.start(); |
| size = GicV2::itLines / 8; |
| clearBankedDistRange(to, clear, 4); |
| copyBankedDistRange(from, to, set, 4); |
| |
| set += 4, clear += 4, size -= 4; |
| clearDistRange(to, clear, size); |
| copyDistRange(from, to, set, size); |
| |
| // Copy pending interrupts (I[CS]PENDRn; R0 is per-CPU banked) |
| set = GicV2::GICD_ISPENDR.start(); |
| clear = GicV2::GICD_ICPENDR.start(); |
| size = GicV2::itLines / 8; |
| clearBankedDistRange(to, clear, 4); |
| copyBankedDistRange(from, to, set, 4); |
| |
| set += 4, clear += 4, size -= 4; |
| clearDistRange(to, clear, size); |
| copyDistRange(from, to, set, size); |
| |
| // Copy active interrupts (I[CS]ACTIVERn; R0 is per-CPU banked) |
| set = GicV2::GICD_ISACTIVER.start(); |
| clear = GicV2::GICD_ICACTIVER.start(); |
| size = GicV2::itLines / 8; |
| clearBankedDistRange(to, clear, 4); |
| copyBankedDistRange(from, to, set, 4); |
| |
| set += 4, clear += 4, size -= 4; |
| clearDistRange(to, clear, size); |
| copyDistRange(from, to, set, size); |
| |
| // Copy interrupt priorities (IPRIORITYRn; R0-7 are per-CPU banked) |
| set = GicV2::GICD_IPRIORITYR.start(); |
| copyBankedDistRange(from, to, set, 32); |
| |
| set += 32; |
| size = GicV2::itLines - 32; |
| copyDistRange(from, to, set, size); |
| |
| // Copy interrupt processor target regs (ITARGETRn; R0-7 are read-only) |
| set = GicV2::GICD_ITARGETSR.start() + 32; |
| size = GicV2::itLines - 32; |
| copyDistRange(from, to, set, size); |
| |
| // Copy interrupt configuration registers (ICFGRn) |
| set = GicV2::GICD_ICFGR.start(); |
| size = GicV2::itLines / 4; |
| copyDistRange(from, to, set, size); |
| } |
| |
| void |
| MuxingKvmGic::fromGicV2ToKvm() |
| { |
| copyGicState(static_cast<GicV2*>(this), kernelGic); |
| } |
| |
| void |
| MuxingKvmGic::fromKvmToGicV2() |
| { |
| copyGicState(kernelGic, static_cast<GicV2*>(this)); |
| |
| // the values read for the Interrupt Priority Mask Register (PMR) |
| // have been shifted by three bits due to its having been emulated by |
| // a VGIC with only 5 PMR bits in its VMCR register. Presently the |
| // Linux kernel does not repair this inaccuracy, so we correct it here. |
| for (int cpu = 0; cpu < system.threads.size(); ++cpu) { |
| cpuPriority[cpu] <<= 3; |
| assert((cpuPriority[cpu] & ~0xff) == 0); |
| } |
| } |
| |
| MuxingKvmGic * |
| MuxingKvmGicParams::create() |
| { |
| return new MuxingKvmGic(this); |
| } |