| /* |
| * Copyright (c) 2011-2015 Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * 3. Neither the name of the copyright holder nor the names of its |
| * contributors may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "gpu-compute/compute_unit.hh" |
| |
| #include <limits> |
| |
| #include "arch/amdgpu/common/tlb.hh" |
| #include "base/output.hh" |
| #include "debug/GPUDisp.hh" |
| #include "debug/GPUExec.hh" |
| #include "debug/GPUFetch.hh" |
| #include "debug/GPUMem.hh" |
| #include "debug/GPUPort.hh" |
| #include "debug/GPUPrefetch.hh" |
| #include "debug/GPUReg.hh" |
| #include "debug/GPURename.hh" |
| #include "debug/GPUSync.hh" |
| #include "debug/GPUTLB.hh" |
| #include "gpu-compute/dispatcher.hh" |
| #include "gpu-compute/gpu_command_processor.hh" |
| #include "gpu-compute/gpu_dyn_inst.hh" |
| #include "gpu-compute/gpu_static_inst.hh" |
| #include "gpu-compute/scalar_register_file.hh" |
| #include "gpu-compute/shader.hh" |
| #include "gpu-compute/simple_pool_manager.hh" |
| #include "gpu-compute/vector_register_file.hh" |
| #include "gpu-compute/wavefront.hh" |
| #include "mem/page_table.hh" |
| #include "sim/process.hh" |
| #include "sim/sim_exit.hh" |
| |
| namespace gem5 |
| { |
| |
| ComputeUnit::ComputeUnit(const Params &p) : ClockedObject(p), |
| numVectorGlobalMemUnits(p.num_global_mem_pipes), |
| numVectorSharedMemUnits(p.num_shared_mem_pipes), |
| numScalarMemUnits(p.num_scalar_mem_pipes), |
| numVectorALUs(p.num_SIMDs), |
| numScalarALUs(p.num_scalar_cores), |
| vrfToCoalescerBusWidth(p.vrf_to_coalescer_bus_width), |
| coalescerToVrfBusWidth(p.coalescer_to_vrf_bus_width), |
| registerManager(p.register_manager), |
| fetchStage(p, *this), |
| scoreboardCheckStage(p, *this, scoreboardCheckToSchedule), |
| scheduleStage(p, *this, scoreboardCheckToSchedule, scheduleToExecute), |
| execStage(p, *this, scheduleToExecute), |
| globalMemoryPipe(p, *this), |
| localMemoryPipe(p, *this), |
| scalarMemoryPipe(p, *this), |
| tickEvent([this]{ exec(); }, "Compute unit tick event", |
| false, Event::CPU_Tick_Pri), |
| cu_id(p.cu_id), |
| vrf(p.vector_register_file), srf(p.scalar_register_file), |
| simdWidth(p.simd_width), |
| spBypassPipeLength(p.spbypass_pipe_length), |
| dpBypassPipeLength(p.dpbypass_pipe_length), |
| scalarPipeStages(p.scalar_pipe_length), |
| operandNetworkLength(p.operand_network_length), |
| issuePeriod(p.issue_period), |
| vrf_gm_bus_latency(p.vrf_gm_bus_latency), |
| srf_scm_bus_latency(p.srf_scm_bus_latency), |
| vrf_lm_bus_latency(p.vrf_lm_bus_latency), |
| perLaneTLB(p.perLaneTLB), prefetchDepth(p.prefetch_depth), |
| prefetchStride(p.prefetch_stride), prefetchType(p.prefetch_prev_type), |
| debugSegFault(p.debugSegFault), |
| functionalTLB(p.functionalTLB), localMemBarrier(p.localMemBarrier), |
| countPages(p.countPages), |
| req_tick_latency(p.mem_req_latency * p.clk_domain->clockPeriod()), |
| resp_tick_latency(p.mem_resp_latency * p.clk_domain->clockPeriod()), |
| _requestorId(p.system->getRequestorId(this, "ComputeUnit")), |
| lds(*p.localDataStore), gmTokenPort(name() + ".gmTokenPort", this), |
| ldsPort(csprintf("%s-port", name()), this), |
| scalarDataPort(csprintf("%s-port", name()), this), |
| scalarDTLBPort(csprintf("%s-port", name()), this), |
| sqcPort(csprintf("%s-port", name()), this), |
| sqcTLBPort(csprintf("%s-port", name()), this), |
| _cacheLineSize(p.system->cacheLineSize()), |
| _numBarrierSlots(p.num_barrier_slots), |
| globalSeqNum(0), wavefrontSize(p.wf_size), |
| scoreboardCheckToSchedule(p), |
| scheduleToExecute(p), |
| stats(this, p.n_wf) |
| { |
| /** |
| * This check is necessary because std::bitset only provides conversion |
| * to unsigned long or unsigned long long via to_ulong() or to_ullong(). |
| * there are a few places in the code where to_ullong() is used, however |
| * if wavefrontSize is larger than a value the host can support then |
| * bitset will throw a runtime exception. We should remove all use of |
| * to_long() or to_ullong() so we can have wavefrontSize greater than 64b, |
| * however until that is done this assert is required. |
| */ |
| fatal_if(p.wf_size > std::numeric_limits<unsigned long long>::digits || |
| p.wf_size <= 0, |
| "WF size is larger than the host can support"); |
| fatal_if(!isPowerOf2(wavefrontSize), |
| "Wavefront size should be a power of 2"); |
| // calculate how many cycles a vector load or store will need to transfer |
| // its data over the corresponding buses |
| numCyclesPerStoreTransfer = |
| (uint32_t)ceil((double)(wfSize() * sizeof(uint32_t)) / |
| (double)vrfToCoalescerBusWidth); |
| |
| numCyclesPerLoadTransfer = (wfSize() * sizeof(uint32_t)) |
| / coalescerToVrfBusWidth; |
| |
| // Initialization: all WF slots are assumed STOPPED |
| idleWfs = p.n_wf * numVectorALUs; |
| lastVaddrWF.resize(numVectorALUs); |
| wfList.resize(numVectorALUs); |
| |
| wfBarrierSlots.resize(p.num_barrier_slots, WFBarrier()); |
| |
| for (int i = 0; i < p.num_barrier_slots; ++i) { |
| freeBarrierIds.insert(i); |
| } |
| |
| for (int j = 0; j < numVectorALUs; ++j) { |
| lastVaddrWF[j].resize(p.n_wf); |
| |
| for (int i = 0; i < p.n_wf; ++i) { |
| lastVaddrWF[j][i].resize(wfSize()); |
| |
| wfList[j].push_back(p.wavefronts[j * p.n_wf + i]); |
| wfList[j][i]->setParent(this); |
| |
| for (int k = 0; k < wfSize(); ++k) { |
| lastVaddrWF[j][i][k] = 0; |
| } |
| } |
| } |
| |
| lastVaddrSimd.resize(numVectorALUs); |
| |
| for (int i = 0; i < numVectorALUs; ++i) { |
| lastVaddrSimd[i].resize(wfSize(), 0); |
| } |
| |
| lastVaddrCU.resize(wfSize()); |
| |
| lds.setParent(this); |
| |
| if (p.execPolicy == "OLDEST-FIRST") { |
| exec_policy = EXEC_POLICY::OLDEST; |
| } else if (p.execPolicy == "ROUND-ROBIN") { |
| exec_policy = EXEC_POLICY::RR; |
| } else { |
| fatal("Invalid WF execution policy (CU)\n"); |
| } |
| |
| for (int i = 0; i < p.port_memory_port_connection_count; ++i) { |
| memPort.emplace_back(csprintf("%s-port%d", name(), i), this, i); |
| } |
| |
| for (int i = 0; i < p.port_translation_port_connection_count; ++i) { |
| tlbPort.emplace_back(csprintf("%s-port%d", name(), i), this, i); |
| } |
| |
| // Setup tokens for response ports. The number of tokens in memPortTokens |
| // is the total token count for the entire vector port (i.e., this CU). |
| memPortTokens = new TokenManager(p.max_cu_tokens); |
| |
| registerExitCallback([this]() { exitCallback(); }); |
| |
| lastExecCycle.resize(numVectorALUs, 0); |
| |
| for (int i = 0; i < vrf.size(); ++i) { |
| vrf[i]->setParent(this); |
| } |
| for (int i = 0; i < srf.size(); ++i) { |
| srf[i]->setParent(this); |
| } |
| numVecRegsPerSimd = vrf[0]->numRegs(); |
| numScalarRegsPerSimd = srf[0]->numRegs(); |
| |
| registerManager->setParent(this); |
| |
| activeWaves = 0; |
| |
| instExecPerSimd.resize(numVectorALUs, 0); |
| |
| // Calculate the number of bits to address a cache line |
| panic_if(!isPowerOf2(_cacheLineSize), |
| "Cache line size should be a power of two."); |
| cacheLineBits = floorLog2(_cacheLineSize); |
| } |
| |
| ComputeUnit::~ComputeUnit() |
| { |
| // Delete wavefront slots |
| for (int j = 0; j < numVectorALUs; ++j) { |
| for (int i = 0; i < shader->n_wf; ++i) { |
| delete wfList[j][i]; |
| } |
| lastVaddrSimd[j].clear(); |
| } |
| lastVaddrCU.clear(); |
| } |
| |
| int |
| ComputeUnit::numExeUnits() const |
| { |
| return numVectorALUs + numScalarALUs + numVectorGlobalMemUnits + |
| numVectorSharedMemUnits + numScalarMemUnits; |
| } |
| |
| // index into readyList of the first memory unit |
| int |
| ComputeUnit::firstMemUnit() const |
| { |
| return numVectorALUs + numScalarALUs; |
| } |
| |
| // index into readyList of the last memory unit |
| int |
| ComputeUnit::lastMemUnit() const |
| { |
| return numExeUnits() - 1; |
| } |
| |
| // index into scalarALUs vector of SALU used by the wavefront |
| int |
| ComputeUnit::mapWaveToScalarAlu(Wavefront *w) const |
| { |
| if (numScalarALUs == 1) { |
| return 0; |
| } else { |
| return w->simdId % numScalarALUs; |
| } |
| } |
| |
| // index into readyList of Scalar ALU unit used by wavefront |
| int |
| ComputeUnit::mapWaveToScalarAluGlobalIdx(Wavefront *w) const |
| { |
| return numVectorALUs + mapWaveToScalarAlu(w); |
| } |
| |
| // index into readyList of Global Memory unit used by wavefront |
| int |
| ComputeUnit::mapWaveToGlobalMem(Wavefront *w) const |
| { |
| // TODO: FIXME if more than 1 GM pipe supported |
| return numVectorALUs + numScalarALUs; |
| } |
| |
| // index into readyList of Local Memory unit used by wavefront |
| int |
| ComputeUnit::mapWaveToLocalMem(Wavefront *w) const |
| { |
| // TODO: FIXME if more than 1 LM pipe supported |
| return numVectorALUs + numScalarALUs + numVectorGlobalMemUnits; |
| } |
| |
| // index into readyList of Scalar Memory unit used by wavefront |
| int |
| ComputeUnit::mapWaveToScalarMem(Wavefront *w) const |
| { |
| // TODO: FIXME if more than 1 ScM pipe supported |
| return numVectorALUs + numScalarALUs + numVectorGlobalMemUnits + |
| numVectorSharedMemUnits; |
| } |
| |
| void |
| ComputeUnit::fillKernelState(Wavefront *w, HSAQueueEntry *task) |
| { |
| w->resizeRegFiles(task->numVectorRegs(), task->numScalarRegs()); |
| w->workGroupSz[0] = task->wgSize(0); |
| w->workGroupSz[1] = task->wgSize(1); |
| w->workGroupSz[2] = task->wgSize(2); |
| w->wgSz = w->workGroupSz[0] * w->workGroupSz[1] * w->workGroupSz[2]; |
| w->gridSz[0] = task->gridSize(0); |
| w->gridSz[1] = task->gridSize(1); |
| w->gridSz[2] = task->gridSize(2); |
| w->computeActualWgSz(task); |
| } |
| |
| void |
| ComputeUnit::startWavefront(Wavefront *w, int waveId, LdsChunk *ldsChunk, |
| HSAQueueEntry *task, int bar_id, bool fetchContext) |
| { |
| static int _n_wave = 0; |
| |
| VectorMask init_mask; |
| init_mask.reset(); |
| |
| for (int k = 0; k < wfSize(); ++k) { |
| if (k + waveId * wfSize() < w->actualWgSzTotal) |
| init_mask[k] = 1; |
| } |
| |
| w->execMask() = init_mask; |
| |
| w->kernId = task->dispatchId(); |
| w->wfId = waveId; |
| w->initMask = init_mask.to_ullong(); |
| |
| if (bar_id > WFBarrier::InvalidID) { |
| w->barrierId(bar_id); |
| } else { |
| assert(!w->hasBarrier()); |
| } |
| |
| for (int k = 0; k < wfSize(); ++k) { |
| w->workItemId[0][k] = (k + waveId * wfSize()) % w->actualWgSz[0]; |
| w->workItemId[1][k] = ((k + waveId * wfSize()) / w->actualWgSz[0]) % |
| w->actualWgSz[1]; |
| w->workItemId[2][k] = (k + waveId * wfSize()) / |
| (w->actualWgSz[0] * w->actualWgSz[1]); |
| |
| w->workItemFlatId[k] = w->workItemId[2][k] * w->actualWgSz[0] * |
| w->actualWgSz[1] + w->workItemId[1][k] * w->actualWgSz[0] + |
| w->workItemId[0][k]; |
| } |
| |
| // WG state |
| w->wgId = task->globalWgId(); |
| w->dispatchId = task->dispatchId(); |
| w->workGroupId[0] = w->wgId % task->numWg(0); |
| w->workGroupId[1] = (w->wgId / task->numWg(0)) % task->numWg(1); |
| w->workGroupId[2] = w->wgId / (task->numWg(0) * task->numWg(1)); |
| |
| // set the wavefront context to have a pointer to this section of the LDS |
| w->ldsChunk = ldsChunk; |
| |
| [[maybe_unused]] int32_t refCount = |
| lds.increaseRefCounter(w->dispatchId, w->wgId); |
| DPRINTF(GPUDisp, "CU%d: increase ref ctr wg[%d] to [%d]\n", |
| cu_id, w->wgId, refCount); |
| |
| w->instructionBuffer.clear(); |
| |
| if (w->pendingFetch) |
| w->dropFetch = true; |
| |
| DPRINTF(GPUDisp, "Scheduling wfDynId/barrier_id %d/%d on CU%d: " |
| "WF[%d][%d]. Ref cnt:%d\n", _n_wave, w->barrierId(), cu_id, |
| w->simdId, w->wfSlotId, refCount); |
| |
| w->initRegState(task, w->actualWgSzTotal); |
| w->start(_n_wave++, task->codeAddr()); |
| |
| stats.waveLevelParallelism.sample(activeWaves); |
| activeWaves++; |
| } |
| |
| /** |
| * trigger invalidate operation in the cu |
| * |
| * req: request initialized in shader, carrying the invlidate flags |
| */ |
| void |
| ComputeUnit::doInvalidate(RequestPtr req, int kernId){ |
| GPUDynInstPtr gpuDynInst |
| = std::make_shared<GPUDynInst>(this, nullptr, |
| new KernelLaunchStaticInst(), getAndIncSeqNum()); |
| |
| // kern_id will be used in inv responses |
| gpuDynInst->kern_id = kernId; |
| // update contextId field |
| req->setContext(gpuDynInst->wfDynId); |
| |
| injectGlobalMemFence(gpuDynInst, true, req); |
| } |
| |
| /** |
| * trigger flush operation in the cu |
| * |
| * gpuDynInst: inst passed to the request |
| */ |
| void |
| ComputeUnit::doFlush(GPUDynInstPtr gpuDynInst) { |
| injectGlobalMemFence(gpuDynInst, true); |
| } |
| |
| // reseting SIMD register pools |
| // I couldn't think of any other place and |
| // I think it is needed in my implementation |
| void |
| ComputeUnit::resetRegisterPool() |
| { |
| for (int i=0; i<numVectorALUs; i++) |
| { |
| registerManager->vrfPoolMgrs[i]->resetRegion(numVecRegsPerSimd); |
| registerManager->srfPoolMgrs[i]->resetRegion(numScalarRegsPerSimd); |
| } |
| } |
| |
| void |
| ComputeUnit::dispWorkgroup(HSAQueueEntry *task, int num_wfs_in_wg) |
| { |
| // If we aren't ticking, start it up! |
| if (!tickEvent.scheduled()) { |
| DPRINTF(GPUDisp, "CU%d: Scheduling wakeup next cycle\n", cu_id); |
| schedule(tickEvent, nextCycle()); |
| } |
| |
| // the kernel's invalidate must have finished before any wg dispatch |
| assert(task->isInvDone()); |
| |
| // reserve the LDS capacity allocated to the work group |
| // disambiguated by the dispatch ID and workgroup ID, which should be |
| // globally unique |
| LdsChunk *ldsChunk = lds.reserveSpace(task->dispatchId(), |
| task->globalWgId(), |
| task->ldsSize()); |
| |
| panic_if(!ldsChunk, "was not able to reserve space for this WG"); |
| |
| // calculate the number of 32-bit vector registers required |
| // by each work item |
| int vregDemand = task->numVectorRegs(); |
| int sregDemand = task->numScalarRegs(); |
| int wave_id = 0; |
| |
| int barrier_id = WFBarrier::InvalidID; |
| |
| /** |
| * If this WG only has one WF it will not consume any barrier |
| * resources because it has no need of them. |
| */ |
| if (num_wfs_in_wg > 1) { |
| /** |
| * Find a free barrier slot for this WG. Each WF in the WG will |
| * receive the same barrier ID. |
| */ |
| barrier_id = getFreeBarrierId(); |
| auto &wf_barrier = barrierSlot(barrier_id); |
| assert(!wf_barrier.maxBarrierCnt()); |
| assert(!wf_barrier.numAtBarrier()); |
| wf_barrier.setMaxBarrierCnt(num_wfs_in_wg); |
| |
| DPRINTF(GPUSync, "CU[%d] - Dispatching WG with barrier Id%d. " |
| "%d waves using this barrier.\n", cu_id, barrier_id, |
| num_wfs_in_wg); |
| } |
| |
| // Assign WFs according to numWfsToSched vector, which is computed by |
| // hasDispResources() |
| for (int j = 0; j < shader->n_wf; ++j) { |
| for (int i = 0; i < numVectorALUs; ++i) { |
| Wavefront *w = wfList[i][j]; |
| // Check if this wavefront slot is available and there are WFs |
| // remaining to be dispatched to current SIMD: |
| // WF slot must be stopped and not waiting |
| // for a release to complete S_RETURNING |
| if (w->getStatus() == Wavefront::S_STOPPED && |
| numWfsToSched[i] > 0) { |
| // decrement number of WFs awaiting dispatch to current SIMD |
| numWfsToSched[i] -= 1; |
| |
| fillKernelState(w, task); |
| |
| DPRINTF(GPURename, "SIMD[%d] wfSlotId[%d] WF[%d] " |
| "vregDemand[%d] sregDemand[%d]\n", i, j, w->wfDynId, |
| vregDemand, sregDemand); |
| |
| registerManager->allocateRegisters(w, vregDemand, sregDemand); |
| |
| startWavefront(w, wave_id, ldsChunk, task, barrier_id); |
| ++wave_id; |
| } |
| } |
| } |
| } |
| |
| void |
| ComputeUnit::insertInPipeMap(Wavefront *w) |
| { |
| panic_if(w->instructionBuffer.empty(), |
| "Instruction Buffer of WF%d can't be empty", w->wgId); |
| GPUDynInstPtr ii = w->instructionBuffer.front(); |
| pipeMap.emplace(ii->seqNum()); |
| } |
| |
| void |
| ComputeUnit::deleteFromPipeMap(Wavefront *w) |
| { |
| panic_if(w->instructionBuffer.empty(), |
| "Instruction Buffer of WF%d can't be empty", w->wgId); |
| GPUDynInstPtr ii = w->instructionBuffer.front(); |
| // delete the dynamic instruction from the pipeline map |
| auto it = pipeMap.find(ii->seqNum()); |
| panic_if(it == pipeMap.end(), "Pipeline Map is empty\n"); |
| pipeMap.erase(it); |
| } |
| |
| bool |
| ComputeUnit::hasDispResources(HSAQueueEntry *task, int &num_wfs_in_wg) |
| { |
| // compute true size of workgroup (after clamping to grid size) |
| int trueWgSize[HSAQueueEntry::MAX_DIM]; |
| int trueWgSizeTotal = 1; |
| |
| for (int d = 0; d < HSAQueueEntry::MAX_DIM; ++d) { |
| trueWgSize[d] = std::min(task->wgSize(d), task->gridSize(d) - |
| task->wgId(d) * task->wgSize(d)); |
| |
| trueWgSizeTotal *= trueWgSize[d]; |
| DPRINTF(GPUDisp, "trueWgSize[%d] = %d\n", d, trueWgSize[d]); |
| } |
| |
| DPRINTF(GPUDisp, "trueWgSizeTotal = %d\n", trueWgSizeTotal); |
| |
| // calculate the number of WFs in this WG |
| int numWfs = (trueWgSizeTotal + wfSize() - 1) / wfSize(); |
| num_wfs_in_wg = numWfs; |
| |
| bool barrier_avail = true; |
| |
| if (numWfs > 1 && !freeBarrierIds.size()) { |
| barrier_avail = false; |
| } |
| |
| // calculate the number of 32-bit vector registers required by each |
| // work item of the work group |
| int vregDemandPerWI = task->numVectorRegs(); |
| // calculate the number of 32-bit scalar registers required by each |
| // work item of the work group |
| int sregDemandPerWI = task->numScalarRegs(); |
| |
| // check if the total number of VGPRs snd SGPRs required by all WFs |
| // of the WG fit in the VRFs of all SIMD units and the CU's SRF |
| panic_if((numWfs * vregDemandPerWI) > (numVectorALUs * numVecRegsPerSimd), |
| "WG with %d WFs and %d VGPRs per WI can not be allocated to CU " |
| "that has %d VGPRs\n", |
| numWfs, vregDemandPerWI, numVectorALUs * numVecRegsPerSimd); |
| panic_if((numWfs * sregDemandPerWI) > numScalarRegsPerSimd, |
| "WG with %d WFs and %d SGPRs per WI can not be scheduled to CU " |
| "with %d SGPRs\n", |
| numWfs, sregDemandPerWI, numScalarRegsPerSimd); |
| |
| // number of WF slots that are not occupied |
| int freeWfSlots = 0; |
| // number of Wfs from WG that were successfully mapped to a SIMD |
| int numMappedWfs = 0; |
| numWfsToSched.clear(); |
| numWfsToSched.resize(numVectorALUs, 0); |
| |
| // attempt to map WFs to the SIMDs, based on WF slot availability |
| // and register file availability |
| for (int j = 0; j < shader->n_wf; ++j) { |
| for (int i = 0; i < numVectorALUs; ++i) { |
| if (wfList[i][j]->getStatus() == Wavefront::S_STOPPED) { |
| ++freeWfSlots; |
| // check if current WF will fit onto current SIMD/VRF |
| // if all WFs have not yet been mapped to the SIMDs |
| if (numMappedWfs < numWfs && |
| registerManager->canAllocateSgprs(i, numWfsToSched[i] + 1, |
| sregDemandPerWI) && |
| registerManager->canAllocateVgprs(i, numWfsToSched[i] + 1, |
| vregDemandPerWI)) { |
| numWfsToSched[i]++; |
| numMappedWfs++; |
| } |
| } |
| } |
| } |
| |
| // check that the number of mapped WFs is not greater |
| // than the actual number of WFs |
| assert(numMappedWfs <= numWfs); |
| |
| bool vregAvail = true; |
| bool sregAvail = true; |
| // if a WF to SIMD mapping was not found, find the limiting resource |
| if (numMappedWfs < numWfs) { |
| |
| for (int j = 0; j < numVectorALUs; ++j) { |
| // find if there are enough free VGPRs in the SIMD's VRF |
| // to accomodate the WFs of the new WG that would be mapped |
| // to this SIMD unit |
| vregAvail &= registerManager-> |
| canAllocateVgprs(j, numWfsToSched[j], vregDemandPerWI); |
| // find if there are enough free SGPRs in the SIMD's SRF |
| // to accomodate the WFs of the new WG that would be mapped |
| // to this SIMD unit |
| sregAvail &= registerManager-> |
| canAllocateSgprs(j, numWfsToSched[j], sregDemandPerWI); |
| } |
| } |
| |
| DPRINTF(GPUDisp, "Free WF slots = %d, Mapped WFs = %d, \ |
| VGPR Availability = %d, SGPR Availability = %d\n", |
| freeWfSlots, numMappedWfs, vregAvail, sregAvail); |
| |
| if (!vregAvail) { |
| ++stats.numTimesWgBlockedDueVgprAlloc; |
| } |
| |
| if (!sregAvail) { |
| ++stats.numTimesWgBlockedDueSgprAlloc; |
| } |
| |
| // Return true if enough WF slots to submit workgroup and if there are |
| // enough VGPRs to schedule all WFs to their SIMD units |
| bool ldsAvail = lds.canReserve(task->ldsSize()); |
| if (!ldsAvail) { |
| stats.wgBlockedDueLdsAllocation++; |
| } |
| |
| if (!barrier_avail) { |
| stats.wgBlockedDueBarrierAllocation++; |
| } |
| |
| // Return true if the following are all true: |
| // (a) all WFs of the WG were mapped to free WF slots |
| // (b) there are enough VGPRs to schedule all WFs to their SIMD units |
| // (c) there are enough SGPRs on the CU to schedule all WFs |
| // (d) there is enough space in LDS to allocate for all WFs |
| bool can_dispatch = numMappedWfs == numWfs && vregAvail && sregAvail |
| && ldsAvail && barrier_avail; |
| return can_dispatch; |
| } |
| |
| int |
| ComputeUnit::numYetToReachBarrier(int bar_id) |
| { |
| auto &wf_barrier = barrierSlot(bar_id); |
| return wf_barrier.numYetToReachBarrier(); |
| } |
| |
| bool |
| ComputeUnit::allAtBarrier(int bar_id) |
| { |
| auto &wf_barrier = barrierSlot(bar_id); |
| return wf_barrier.allAtBarrier(); |
| } |
| |
| void |
| ComputeUnit::incNumAtBarrier(int bar_id) |
| { |
| auto &wf_barrier = barrierSlot(bar_id); |
| wf_barrier.incNumAtBarrier(); |
| } |
| |
| int |
| ComputeUnit::numAtBarrier(int bar_id) |
| { |
| auto &wf_barrier = barrierSlot(bar_id); |
| return wf_barrier.numAtBarrier(); |
| } |
| |
| int |
| ComputeUnit::maxBarrierCnt(int bar_id) |
| { |
| auto &wf_barrier = barrierSlot(bar_id); |
| return wf_barrier.maxBarrierCnt(); |
| } |
| |
| void |
| ComputeUnit::resetBarrier(int bar_id) |
| { |
| auto &wf_barrier = barrierSlot(bar_id); |
| wf_barrier.reset(); |
| } |
| |
| void |
| ComputeUnit::decMaxBarrierCnt(int bar_id) |
| { |
| auto &wf_barrier = barrierSlot(bar_id); |
| wf_barrier.decMaxBarrierCnt(); |
| } |
| |
| void |
| ComputeUnit::releaseBarrier(int bar_id) |
| { |
| auto &wf_barrier = barrierSlot(bar_id); |
| wf_barrier.release(); |
| freeBarrierIds.insert(bar_id); |
| } |
| |
| void |
| ComputeUnit::releaseWFsFromBarrier(int bar_id) |
| { |
| for (int i = 0; i < numVectorALUs; ++i) { |
| for (int j = 0; j < shader->n_wf; ++j) { |
| Wavefront *wf = wfList[i][j]; |
| if (wf->barrierId() == bar_id) { |
| assert(wf->getStatus() == Wavefront::S_BARRIER); |
| wf->setStatus(Wavefront::S_RUNNING); |
| } |
| } |
| } |
| } |
| |
| // Execute one clock worth of work on the ComputeUnit. |
| void |
| ComputeUnit::exec() |
| { |
| // process reads and writes in the RFs |
| for (auto &vecRegFile : vrf) { |
| vecRegFile->exec(); |
| } |
| |
| for (auto &scRegFile : srf) { |
| scRegFile->exec(); |
| } |
| |
| // Execute pipeline stages in reverse order to simulate |
| // the pipeline latency |
| scalarMemoryPipe.exec(); |
| globalMemoryPipe.exec(); |
| localMemoryPipe.exec(); |
| execStage.exec(); |
| scheduleStage.exec(); |
| scoreboardCheckStage.exec(); |
| fetchStage.exec(); |
| |
| stats.totalCycles++; |
| |
| // Put this CU to sleep if there is no more work to be done. |
| if (!isDone()) { |
| schedule(tickEvent, nextCycle()); |
| } else { |
| shader->notifyCuSleep(); |
| DPRINTF(GPUDisp, "CU%d: Going to sleep\n", cu_id); |
| } |
| } |
| |
| void |
| ComputeUnit::init() |
| { |
| // Initialize CU Bus models and execution resources |
| |
| // Vector ALUs |
| vectorALUs.clear(); |
| for (int i = 0; i < numVectorALUs; i++) { |
| vectorALUs.emplace_back(this, clockPeriod()); |
| } |
| |
| // Scalar ALUs |
| scalarALUs.clear(); |
| for (int i = 0; i < numScalarALUs; i++) { |
| scalarALUs.emplace_back(this, clockPeriod()); |
| } |
| |
| // Vector Global Memory |
| fatal_if(numVectorGlobalMemUnits > 1, |
| "No support for multiple Global Memory Pipelines exists!!!"); |
| vectorGlobalMemUnit.init(this, clockPeriod()); |
| vrfToGlobalMemPipeBus.init(this, clockPeriod()); |
| glbMemToVrfBus.init(this, clockPeriod()); |
| |
| // Vector Local/Shared Memory |
| fatal_if(numVectorSharedMemUnits > 1, |
| "No support for multiple Local Memory Pipelines exists!!!"); |
| vectorSharedMemUnit.init(this, clockPeriod()); |
| vrfToLocalMemPipeBus.init(this, clockPeriod()); |
| locMemToVrfBus.init(this, clockPeriod()); |
| |
| // Scalar Memory |
| fatal_if(numScalarMemUnits > 1, |
| "No support for multiple Scalar Memory Pipelines exists!!!"); |
| scalarMemUnit.init(this, clockPeriod()); |
| srfToScalarMemPipeBus.init(this, clockPeriod()); |
| scalarMemToSrfBus.init(this, clockPeriod()); |
| |
| vectorRegsReserved.resize(numVectorALUs, 0); |
| scalarRegsReserved.resize(numVectorALUs, 0); |
| |
| fetchStage.init(); |
| scheduleStage.init(); |
| execStage.init(); |
| globalMemoryPipe.init(); |
| |
| gmTokenPort.setTokenManager(memPortTokens); |
| } |
| |
| bool |
| ComputeUnit::DataPort::recvTimingResp(PacketPtr pkt) |
| { |
| // Ruby has completed the memory op. Schedule the mem_resp_event at the |
| // appropriate cycle to process the timing memory response |
| // This delay represents the pipeline delay |
| SenderState *sender_state = safe_cast<SenderState*>(pkt->senderState); |
| PortID index = sender_state->port_index; |
| GPUDynInstPtr gpuDynInst = sender_state->_gpuDynInst; |
| GPUDispatcher &dispatcher = computeUnit->shader->dispatcher(); |
| |
| // MemSyncResp + WriteAckResp are handled completely here and we don't |
| // schedule a MemRespEvent to process the responses further |
| if (pkt->cmd == MemCmd::MemSyncResp) { |
| // This response is for 1 of the following request types: |
| // - kernel launch |
| // - kernel end |
| // - non-kernel mem sync |
| |
| // Kernel Launch |
| // wavefront was nullptr when launching kernel, so it is meaningless |
| // here (simdId=-1, wfSlotId=-1) |
| if (gpuDynInst->isKernelLaunch()) { |
| // for kernel launch, the original request must be both kernel-type |
| // and INV_L1 |
| assert(pkt->req->isKernel()); |
| assert(pkt->req->isInvL1()); |
| |
| // one D-Cache inv is done, decrement counter |
| dispatcher.updateInvCounter(gpuDynInst->kern_id); |
| |
| delete pkt->senderState; |
| delete pkt; |
| return true; |
| } |
| |
| // retrieve wavefront from inst |
| Wavefront *w = gpuDynInst->wavefront(); |
| |
| // Check if we are waiting on Kernel End Flush |
| if (w->getStatus() == Wavefront::S_RETURNING |
| && gpuDynInst->isEndOfKernel()) { |
| // for kernel end, the original request must be both kernel-type |
| // and last-level GPU cache should be flushed if it contains |
| // dirty data. This request may have been quiesced and |
| // immediately responded to if the GL2 is a write-through / |
| // read-only cache. |
| assert(pkt->req->isKernel()); |
| assert(pkt->req->isGL2CacheFlush()); |
| |
| // once flush done, decrement counter, and return whether all |
| // dirty writeback operations are done for the kernel |
| bool isWbDone = dispatcher.updateWbCounter(gpuDynInst->kern_id); |
| |
| // not all wbs are done for the kernel, just release pkt |
| // resources |
| if (!isWbDone) { |
| delete pkt->senderState; |
| delete pkt; |
| return true; |
| } |
| |
| // all wbs are completed for the kernel, do retirement work |
| // for the workgroup |
| DPRINTF(GPUDisp, "CU%d: WF[%d][%d][wv=%d]: WG %d completed\n", |
| computeUnit->cu_id, w->simdId, w->wfSlotId, |
| w->wfDynId, w->wgId); |
| |
| dispatcher.notifyWgCompl(w); |
| w->setStatus(Wavefront::S_STOPPED); |
| } |
| |
| if (!pkt->req->isKernel()) { |
| w = computeUnit->wfList[gpuDynInst->simdId][gpuDynInst->wfSlotId]; |
| DPRINTF(GPUExec, "MemSyncResp: WF[%d][%d] WV%d %s decrementing " |
| "outstanding reqs %d => %d\n", gpuDynInst->simdId, |
| gpuDynInst->wfSlotId, gpuDynInst->wfDynId, |
| gpuDynInst->disassemble(), w->outstandingReqs, |
| w->outstandingReqs - 1); |
| computeUnit->globalMemoryPipe.handleResponse(gpuDynInst); |
| } |
| |
| delete pkt->senderState; |
| delete pkt; |
| return true; |
| } |
| |
| EventFunctionWrapper *mem_resp_event = |
| computeUnit->memPort[index].createMemRespEvent(pkt); |
| |
| DPRINTF(GPUPort, |
| "CU%d: WF[%d][%d]: gpuDynInst: %d, index %d, addr %#x received!\n", |
| computeUnit->cu_id, gpuDynInst->simdId, gpuDynInst->wfSlotId, |
| gpuDynInst->seqNum(), index, pkt->req->getPaddr()); |
| |
| computeUnit->schedule(mem_resp_event, |
| curTick() + computeUnit->resp_tick_latency); |
| |
| return true; |
| } |
| |
| bool |
| ComputeUnit::ScalarDataPort::recvTimingResp(PacketPtr pkt) |
| { |
| assert(!pkt->req->isKernel()); |
| |
| // retrieve sender state |
| SenderState *sender_state = safe_cast<SenderState*>(pkt->senderState); |
| GPUDynInstPtr gpuDynInst = sender_state->_gpuDynInst; |
| |
| assert(pkt->isRead() || pkt->isWrite()); |
| assert(gpuDynInst->numScalarReqs > 0); |
| |
| gpuDynInst->numScalarReqs--; |
| |
| /** |
| * for each returned scalar request we decrement the |
| * numScalarReqs counter that is associated with this |
| * gpuDynInst, which should have been set to correspond |
| * to the number of packets sent for the memory op. |
| * once all packets return, the memory op is finished |
| * and we can push it into the response queue. |
| */ |
| if (!gpuDynInst->numScalarReqs) { |
| if (gpuDynInst->isLoad() || gpuDynInst->isAtomic()) { |
| computeUnit->scalarMemoryPipe.getGMLdRespFIFO().push( |
| gpuDynInst); |
| } else { |
| computeUnit->scalarMemoryPipe.getGMStRespFIFO().push( |
| gpuDynInst); |
| } |
| } |
| |
| delete pkt->senderState; |
| delete pkt; |
| |
| return true; |
| } |
| |
| void |
| ComputeUnit::ScalarDataPort::recvReqRetry() |
| { |
| for (const auto &pkt : retries) { |
| if (!sendTimingReq(pkt)) { |
| break; |
| } else { |
| retries.pop_front(); |
| } |
| } |
| } |
| |
| void |
| ComputeUnit::DataPort::recvReqRetry() |
| { |
| int len = retries.size(); |
| |
| assert(len > 0); |
| |
| for (int i = 0; i < len; ++i) { |
| PacketPtr pkt = retries.front().first; |
| [[maybe_unused]] GPUDynInstPtr gpuDynInst = retries.front().second; |
| DPRINTF(GPUMem, "CU%d: WF[%d][%d]: retry mem inst addr %#x\n", |
| computeUnit->cu_id, gpuDynInst->simdId, gpuDynInst->wfSlotId, |
| pkt->req->getPaddr()); |
| |
| /** Currently Ruby can return false due to conflicts for the particular |
| * cache block or address. Thus other requests should be allowed to |
| * pass and the data port should expect multiple retries. */ |
| if (!sendTimingReq(pkt)) { |
| DPRINTF(GPUMem, "failed again!\n"); |
| break; |
| } else { |
| DPRINTF(GPUMem, "successful!\n"); |
| retries.pop_front(); |
| } |
| } |
| } |
| |
| bool |
| ComputeUnit::SQCPort::recvTimingResp(PacketPtr pkt) |
| { |
| computeUnit->fetchStage.processFetchReturn(pkt); |
| return true; |
| } |
| |
| void |
| ComputeUnit::SQCPort::recvReqRetry() |
| { |
| int len = retries.size(); |
| |
| assert(len > 0); |
| |
| for (int i = 0; i < len; ++i) { |
| PacketPtr pkt = retries.front().first; |
| [[maybe_unused]] Wavefront *wavefront = retries.front().second; |
| DPRINTF(GPUFetch, "CU%d: WF[%d][%d]: retrying FETCH addr %#x\n", |
| computeUnit->cu_id, wavefront->simdId, wavefront->wfSlotId, |
| pkt->req->getPaddr()); |
| if (!sendTimingReq(pkt)) { |
| DPRINTF(GPUFetch, "failed again!\n"); |
| break; |
| } else { |
| DPRINTF(GPUFetch, "successful!\n"); |
| retries.pop_front(); |
| } |
| } |
| } |
| |
| void |
| ComputeUnit::sendRequest(GPUDynInstPtr gpuDynInst, PortID index, PacketPtr pkt) |
| { |
| // There must be a way around this check to do the globalMemStart... |
| Addr tmp_vaddr = pkt->req->getVaddr(); |
| |
| updatePageDivergenceDist(tmp_vaddr); |
| |
| // set PC in request |
| pkt->req->setPC(gpuDynInst->wavefront()->pc()); |
| |
| pkt->req->setReqInstSeqNum(gpuDynInst->seqNum()); |
| |
| // figure out the type of the request to set read/write |
| BaseMMU::Mode TLB_mode; |
| assert(pkt->isRead() || pkt->isWrite()); |
| |
| // only do some things if actually accessing data |
| bool isDataAccess = pkt->isWrite() || pkt->isRead(); |
| |
| // For dGPUs, real hardware will extract MTYPE from the PTE. Our model |
| // uses x86 pagetables which don't have fields to track GPU MTYPEs. |
| // Rather than hacking up the pagetable to add these bits in, we just |
| // keep a structure local to our GPUs that are populated in our |
| // emulated driver whenever memory is allocated. Consult that structure |
| // here in case we need a memtype override. |
| shader->gpuCmdProc.driver()->setMtype(pkt->req); |
| |
| // Check write before read for atomic operations |
| // since atomic operations should use BaseMMU::Write |
| if (pkt->isWrite()) { |
| TLB_mode = BaseMMU::Write; |
| } else if (pkt->isRead()) { |
| TLB_mode = BaseMMU::Read; |
| } else { |
| fatal("pkt is not a read nor a write\n"); |
| } |
| |
| stats.tlbCycles -= curTick(); |
| ++stats.tlbRequests; |
| |
| PortID tlbPort_index = perLaneTLB ? index : 0; |
| |
| if (shader->timingSim) { |
| if (debugSegFault) { |
| Process *p = shader->gpuTc->getProcessPtr(); |
| Addr vaddr = pkt->req->getVaddr(); |
| unsigned size = pkt->getSize(); |
| |
| if ((vaddr + size - 1) % 64 < vaddr % 64) { |
| panic("CU%d: WF[%d][%d]: Access to addr %#x is unaligned!\n", |
| cu_id, gpuDynInst->simdId, gpuDynInst->wfSlotId, vaddr); |
| } |
| |
| Addr paddr; |
| |
| if (!p->pTable->translate(vaddr, paddr)) { |
| if (!p->fixupFault(vaddr)) { |
| panic("CU%d: WF[%d][%d]: Fault on addr %#x!\n", |
| cu_id, gpuDynInst->simdId, gpuDynInst->wfSlotId, |
| vaddr); |
| } |
| } |
| } |
| |
| // This is the SenderState needed upon return |
| pkt->senderState = new DTLBPort::SenderState(gpuDynInst, index); |
| |
| // This is the senderState needed by the TLB hierarchy to function |
| GpuTranslationState *translation_state = |
| new GpuTranslationState(TLB_mode, shader->gpuTc, false, |
| pkt->senderState); |
| |
| pkt->senderState = translation_state; |
| |
| if (functionalTLB) { |
| tlbPort[tlbPort_index].sendFunctional(pkt); |
| |
| // update the hitLevel distribution |
| int hit_level = translation_state->hitLevel; |
| assert(hit_level != -1); |
| stats.hitsPerTLBLevel[hit_level]++; |
| |
| // New SenderState for the memory access |
| GpuTranslationState *sender_state = |
| safe_cast<GpuTranslationState*>(pkt->senderState); |
| |
| delete sender_state->tlbEntry; |
| delete sender_state->saved; |
| delete sender_state; |
| |
| assert(pkt->req->hasPaddr()); |
| assert(pkt->req->hasSize()); |
| |
| // this is necessary because the GPU TLB receives packets instead |
| // of requests. when the translation is complete, all relevent |
| // fields in the request will be populated, but not in the packet. |
| // here we create the new packet so we can set the size, addr, |
| // and proper flags. |
| PacketPtr oldPkt = pkt; |
| pkt = new Packet(oldPkt->req, oldPkt->cmd); |
| if (isDataAccess) { |
| uint8_t *tmpData = oldPkt->getPtr<uint8_t>(); |
| pkt->dataStatic(tmpData); |
| } |
| delete oldPkt; |
| |
| |
| // New SenderState for the memory access |
| pkt->senderState = |
| new ComputeUnit::DataPort::SenderState(gpuDynInst, index, |
| nullptr); |
| |
| gpuDynInst->memStatusVector[pkt->getAddr()].push_back(index); |
| gpuDynInst->tlbHitLevel[index] = hit_level; |
| |
| // translation is done. Schedule the mem_req_event at the |
| // appropriate cycle to send the timing memory request to ruby |
| EventFunctionWrapper *mem_req_event = |
| memPort[index].createMemReqEvent(pkt); |
| |
| DPRINTF(GPUPort, "CU%d: WF[%d][%d]: index %d, addr %#x data " |
| "scheduled\n", cu_id, gpuDynInst->simdId, |
| gpuDynInst->wfSlotId, index, pkt->req->getPaddr()); |
| |
| schedule(mem_req_event, curTick() + req_tick_latency); |
| } else if (tlbPort[tlbPort_index].isStalled()) { |
| assert(tlbPort[tlbPort_index].retries.size() > 0); |
| |
| DPRINTF(GPUTLB, "CU%d: WF[%d][%d]: Translation for addr %#x " |
| "failed!\n", cu_id, gpuDynInst->simdId, |
| gpuDynInst->wfSlotId, tmp_vaddr); |
| |
| tlbPort[tlbPort_index].retries.push_back(pkt); |
| } else if (!tlbPort[tlbPort_index].sendTimingReq(pkt)) { |
| // Stall the data port; |
| // No more packet will be issued till |
| // ruby indicates resources are freed by |
| // a recvReqRetry() call back on this port. |
| tlbPort[tlbPort_index].stallPort(); |
| |
| DPRINTF(GPUTLB, "CU%d: WF[%d][%d]: Translation for addr %#x " |
| "failed!\n", cu_id, gpuDynInst->simdId, |
| gpuDynInst->wfSlotId, tmp_vaddr); |
| |
| tlbPort[tlbPort_index].retries.push_back(pkt); |
| } else { |
| DPRINTF(GPUTLB, |
| "CU%d: WF[%d][%d]: Translation for addr %#x sent!\n", |
| cu_id, gpuDynInst->simdId, gpuDynInst->wfSlotId, tmp_vaddr); |
| } |
| } else { |
| if (pkt->cmd == MemCmd::MemSyncReq) { |
| gpuDynInst->resetEntireStatusVector(); |
| } else { |
| gpuDynInst->decrementStatusVector(index); |
| } |
| |
| // New SenderState for the memory access |
| delete pkt->senderState; |
| |
| // Because it's atomic operation, only need TLB translation state |
| pkt->senderState = new GpuTranslationState(TLB_mode, |
| shader->gpuTc); |
| |
| tlbPort[tlbPort_index].sendFunctional(pkt); |
| |
| // the addr of the packet is not modified, so we need to create a new |
| // packet, or otherwise the memory access will have the old virtual |
| // address sent in the translation packet, instead of the physical |
| // address returned by the translation. |
| PacketPtr new_pkt = new Packet(pkt->req, pkt->cmd); |
| new_pkt->dataStatic(pkt->getPtr<uint8_t>()); |
| |
| // Translation is done. It is safe to send the packet to memory. |
| memPort[0].sendFunctional(new_pkt); |
| |
| DPRINTF(GPUMem, "Functional sendRequest\n"); |
| DPRINTF(GPUMem, "CU%d: WF[%d][%d]: index %d: addr %#x\n", cu_id, |
| gpuDynInst->simdId, gpuDynInst->wfSlotId, index, |
| new_pkt->req->getPaddr()); |
| |
| // safe_cast the senderState |
| GpuTranslationState *sender_state = |
| safe_cast<GpuTranslationState*>(pkt->senderState); |
| |
| delete sender_state->tlbEntry; |
| delete new_pkt; |
| delete pkt->senderState; |
| delete pkt; |
| } |
| } |
| |
| void |
| ComputeUnit::sendScalarRequest(GPUDynInstPtr gpuDynInst, PacketPtr pkt) |
| { |
| assert(pkt->isWrite() || pkt->isRead()); |
| |
| BaseMMU::Mode tlb_mode = pkt->isRead() ? BaseMMU::Read : BaseMMU::Write; |
| |
| pkt->senderState = |
| new ComputeUnit::ScalarDTLBPort::SenderState(gpuDynInst); |
| |
| pkt->senderState = |
| new GpuTranslationState(tlb_mode, shader->gpuTc, false, |
| pkt->senderState); |
| |
| if (scalarDTLBPort.isStalled()) { |
| assert(scalarDTLBPort.retries.size()); |
| scalarDTLBPort.retries.push_back(pkt); |
| } else if (!scalarDTLBPort.sendTimingReq(pkt)) { |
| scalarDTLBPort.stallPort(); |
| scalarDTLBPort.retries.push_back(pkt); |
| } else { |
| DPRINTF(GPUTLB, "sent scalar %s translation request for addr %#x\n", |
| tlb_mode == BaseMMU::Read ? "read" : "write", |
| pkt->req->getVaddr()); |
| } |
| } |
| |
| void |
| ComputeUnit::injectGlobalMemFence(GPUDynInstPtr gpuDynInst, |
| bool kernelMemSync, |
| RequestPtr req) |
| { |
| assert(gpuDynInst->isGlobalSeg() || |
| gpuDynInst->executedAs() == enums::SC_GLOBAL); |
| |
| if (!req) { |
| req = std::make_shared<Request>( |
| 0, 0, 0, requestorId(), 0, gpuDynInst->wfDynId); |
| } |
| |
| // all mem sync requests have Paddr == 0 |
| req->setPaddr(0); |
| |
| PacketPtr pkt = nullptr; |
| |
| if (kernelMemSync) { |
| if (gpuDynInst->isKernelLaunch()) { |
| req->setCacheCoherenceFlags(Request::INV_L1); |
| req->setReqInstSeqNum(gpuDynInst->seqNum()); |
| req->setFlags(Request::KERNEL); |
| pkt = new Packet(req, MemCmd::MemSyncReq); |
| pkt->pushSenderState( |
| new ComputeUnit::DataPort::SenderState(gpuDynInst, 0, nullptr)); |
| |
| EventFunctionWrapper *mem_req_event = |
| memPort[0].createMemReqEvent(pkt); |
| |
| DPRINTF(GPUPort, "CU%d: WF[%d][%d]: index %d, addr %#x scheduling " |
| "an acquire\n", cu_id, gpuDynInst->simdId, |
| gpuDynInst->wfSlotId, 0, pkt->req->getPaddr()); |
| |
| schedule(mem_req_event, curTick() + req_tick_latency); |
| } else { |
| // kernel end flush of GL2 cache may be quiesced by Ruby if the |
| // GL2 is a read-only cache |
| assert(shader->impl_kern_end_rel); |
| assert(gpuDynInst->isEndOfKernel()); |
| |
| req->setCacheCoherenceFlags(Request::FLUSH_L2); |
| req->setReqInstSeqNum(gpuDynInst->seqNum()); |
| req->setFlags(Request::KERNEL); |
| pkt = new Packet(req, MemCmd::MemSyncReq); |
| pkt->pushSenderState( |
| new ComputeUnit::DataPort::SenderState(gpuDynInst, 0, nullptr)); |
| |
| EventFunctionWrapper *mem_req_event = |
| memPort[0].createMemReqEvent(pkt); |
| |
| DPRINTF(GPUPort, "CU%d: WF[%d][%d]: index %d, addr %#x scheduling " |
| "a release\n", cu_id, gpuDynInst->simdId, |
| gpuDynInst->wfSlotId, 0, pkt->req->getPaddr()); |
| |
| schedule(mem_req_event, curTick() + req_tick_latency); |
| } |
| } else { |
| gpuDynInst->setRequestFlags(req); |
| |
| req->setReqInstSeqNum(gpuDynInst->seqNum()); |
| |
| pkt = new Packet(req, MemCmd::MemSyncReq); |
| pkt->pushSenderState( |
| new ComputeUnit::DataPort::SenderState(gpuDynInst, 0, nullptr)); |
| |
| EventFunctionWrapper *mem_req_event = |
| memPort[0].createMemReqEvent(pkt); |
| |
| DPRINTF(GPUPort, |
| "CU%d: WF[%d][%d]: index %d, addr %#x sync scheduled\n", |
| cu_id, gpuDynInst->simdId, gpuDynInst->wfSlotId, 0, |
| pkt->req->getPaddr()); |
| |
| schedule(mem_req_event, curTick() + req_tick_latency); |
| } |
| } |
| |
| void |
| ComputeUnit::DataPort::processMemRespEvent(PacketPtr pkt) |
| { |
| DataPort::SenderState *sender_state = |
| safe_cast<DataPort::SenderState*>(pkt->senderState); |
| |
| GPUDynInstPtr gpuDynInst = sender_state->_gpuDynInst; |
| ComputeUnit *compute_unit = computeUnit; |
| |
| assert(gpuDynInst); |
| |
| DPRINTF(GPUPort, "CU%d: WF[%d][%d]: Response for addr %#x, index %d\n", |
| compute_unit->cu_id, gpuDynInst->simdId, gpuDynInst->wfSlotId, |
| pkt->req->getPaddr(), id); |
| |
| Addr paddr = pkt->req->getPaddr(); |
| |
| // mem sync resp callback must be handled already in |
| // DataPort::recvTimingResp |
| assert(pkt->cmd != MemCmd::MemSyncResp); |
| |
| // The status vector and global memory response for WriteResp packets get |
| // handled by the WriteCompleteResp packets. |
| if (pkt->cmd == MemCmd::WriteResp) { |
| delete pkt; |
| return; |
| } |
| |
| // this is for read, write and atomic |
| int index = gpuDynInst->memStatusVector[paddr].back(); |
| |
| DPRINTF(GPUMem, "Response for addr %#x, index %d\n", |
| pkt->req->getPaddr(), id); |
| |
| gpuDynInst->memStatusVector[paddr].pop_back(); |
| gpuDynInst->pAddr = pkt->req->getPaddr(); |
| |
| gpuDynInst->decrementStatusVector(index); |
| DPRINTF(GPUMem, "bitvector is now %s\n", gpuDynInst->printStatusVector()); |
| |
| if (gpuDynInst->allLanesZero()) { |
| auto iter = gpuDynInst->memStatusVector.begin(); |
| auto end = gpuDynInst->memStatusVector.end(); |
| |
| while (iter != end) { |
| assert(iter->second.empty()); |
| ++iter; |
| } |
| |
| // Calculate the difference between the arrival of the first cache |
| // block and the last cache block to arrive if we have the time |
| // for the first cache block. |
| if (compute_unit->headTailMap.count(gpuDynInst)) { |
| Tick headTick = compute_unit->headTailMap.at(gpuDynInst); |
| compute_unit->stats.headTailLatency.sample(curTick() - headTick); |
| compute_unit->headTailMap.erase(gpuDynInst); |
| } |
| |
| gpuDynInst->memStatusVector.clear(); |
| |
| gpuDynInst-> |
| profileRoundTripTime(curTick(), InstMemoryHop::GMEnqueue); |
| compute_unit->globalMemoryPipe.handleResponse(gpuDynInst); |
| |
| DPRINTF(GPUMem, "CU%d: WF[%d][%d]: packet totally complete\n", |
| compute_unit->cu_id, gpuDynInst->simdId, |
| gpuDynInst->wfSlotId); |
| } else { |
| if (pkt->isRead()) { |
| if (!compute_unit->headTailMap.count(gpuDynInst)) { |
| compute_unit->headTailMap |
| .insert(std::make_pair(gpuDynInst, curTick())); |
| } |
| } |
| } |
| |
| delete pkt->senderState; |
| delete pkt; |
| } |
| |
| bool |
| ComputeUnit::DTLBPort::recvTimingResp(PacketPtr pkt) |
| { |
| Addr line = pkt->req->getPaddr(); |
| |
| DPRINTF(GPUTLB, "CU%d: DTLBPort received %#x->%#x\n", computeUnit->cu_id, |
| pkt->req->getVaddr(), line); |
| |
| assert(pkt->senderState); |
| computeUnit->stats.tlbCycles += curTick(); |
| |
| // pop off the TLB translation state |
| GpuTranslationState *translation_state = |
| safe_cast<GpuTranslationState*>(pkt->senderState); |
| |
| // no PageFaults are permitted for data accesses |
| if (!translation_state->tlbEntry) { |
| DTLBPort::SenderState *sender_state = |
| safe_cast<DTLBPort::SenderState*>(translation_state->saved); |
| |
| [[maybe_unused]] Wavefront *w = |
| computeUnit->wfList[sender_state->_gpuDynInst->simdId] |
| [sender_state->_gpuDynInst->wfSlotId]; |
| |
| DPRINTFN("Wave %d couldn't tranlate vaddr %#x\n", w->wfDynId, |
| pkt->req->getVaddr()); |
| } |
| |
| // update the hitLevel distribution |
| int hit_level = translation_state->hitLevel; |
| computeUnit->stats.hitsPerTLBLevel[hit_level]++; |
| |
| delete translation_state->tlbEntry; |
| assert(!translation_state->ports.size()); |
| pkt->senderState = translation_state->saved; |
| |
| // for prefetch pkt |
| BaseMMU::Mode TLB_mode = translation_state->tlbMode; |
| |
| delete translation_state; |
| |
| // use the original sender state to know how to close this transaction |
| DTLBPort::SenderState *sender_state = |
| safe_cast<DTLBPort::SenderState*>(pkt->senderState); |
| |
| GPUDynInstPtr gpuDynInst = sender_state->_gpuDynInst; |
| PortID mp_index = sender_state->portIndex; |
| Addr vaddr = pkt->req->getVaddr(); |
| gpuDynInst->memStatusVector[line].push_back(mp_index); |
| gpuDynInst->tlbHitLevel[mp_index] = hit_level; |
| |
| MemCmd requestCmd; |
| |
| if (pkt->cmd == MemCmd::ReadResp) { |
| requestCmd = MemCmd::ReadReq; |
| } else if (pkt->cmd == MemCmd::WriteResp) { |
| requestCmd = MemCmd::WriteReq; |
| } else if (pkt->cmd == MemCmd::SwapResp) { |
| requestCmd = MemCmd::SwapReq; |
| } else { |
| panic("unsupported response to request conversion %s\n", |
| pkt->cmd.toString()); |
| } |
| |
| if (computeUnit->prefetchDepth) { |
| int simdId = gpuDynInst->simdId; |
| int wfSlotId = gpuDynInst->wfSlotId; |
| Addr last = 0; |
| |
| switch(computeUnit->prefetchType) { |
| case enums::PF_CU: |
| last = computeUnit->lastVaddrCU[mp_index]; |
| break; |
| case enums::PF_PHASE: |
| last = computeUnit->lastVaddrSimd[simdId][mp_index]; |
| break; |
| case enums::PF_WF: |
| last = computeUnit->lastVaddrWF[simdId][wfSlotId][mp_index]; |
| default: |
| break; |
| } |
| |
| DPRINTF(GPUPrefetch, "CU[%d][%d][%d][%d]: %#x was last\n", |
| computeUnit->cu_id, simdId, wfSlotId, mp_index, last); |
| |
| int stride = last ? (roundDown(vaddr, X86ISA::PageBytes) - |
| roundDown(last, X86ISA::PageBytes)) >> X86ISA::PageShift |
| : 0; |
| |
| DPRINTF(GPUPrefetch, "Stride is %d\n", stride); |
| |
| computeUnit->lastVaddrCU[mp_index] = vaddr; |
| computeUnit->lastVaddrSimd[simdId][mp_index] = vaddr; |
| computeUnit->lastVaddrWF[simdId][wfSlotId][mp_index] = vaddr; |
| |
| stride = (computeUnit->prefetchType == enums::PF_STRIDE) ? |
| computeUnit->prefetchStride: stride; |
| |
| DPRINTF(GPUPrefetch, "%#x to: CU[%d][%d][%d][%d]\n", vaddr, |
| computeUnit->cu_id, simdId, wfSlotId, mp_index); |
| |
| DPRINTF(GPUPrefetch, "Prefetching from %#x:", vaddr); |
| |
| // Prefetch Next few pages atomically |
| for (int pf = 1; pf <= computeUnit->prefetchDepth; ++pf) { |
| DPRINTF(GPUPrefetch, "%d * %d: %#x\n", pf, stride, |
| vaddr + stride * pf * X86ISA::PageBytes); |
| |
| if (!stride) |
| break; |
| |
| RequestPtr prefetch_req = std::make_shared<Request>( |
| vaddr + stride * pf * X86ISA::PageBytes, |
| sizeof(uint8_t), 0, |
| computeUnit->requestorId(), |
| 0, 0, nullptr); |
| |
| PacketPtr prefetch_pkt = new Packet(prefetch_req, requestCmd); |
| uint8_t foo = 0; |
| prefetch_pkt->dataStatic(&foo); |
| |
| // Because it's atomic operation, only need TLB translation state |
| prefetch_pkt->senderState = |
| new GpuTranslationState(TLB_mode, |
| computeUnit->shader->gpuTc, true); |
| |
| // Currently prefetches are zero-latency, hence the sendFunctional |
| sendFunctional(prefetch_pkt); |
| |
| /* safe_cast the senderState */ |
| GpuTranslationState *tlb_state = |
| safe_cast<GpuTranslationState*>( |
| prefetch_pkt->senderState); |
| |
| |
| delete tlb_state->tlbEntry; |
| delete tlb_state; |
| delete prefetch_pkt; |
| } |
| } |
| |
| // First we must convert the response cmd back to a request cmd so that |
| // the request can be sent through the cu's request port |
| PacketPtr new_pkt = new Packet(pkt->req, requestCmd); |
| new_pkt->dataStatic(pkt->getPtr<uint8_t>()); |
| delete pkt->senderState; |
| delete pkt; |
| |
| // New SenderState for the memory access |
| new_pkt->senderState = |
| new ComputeUnit::DataPort::SenderState(gpuDynInst, mp_index, |
| nullptr); |
| |
| // translation is done. Schedule the mem_req_event at the appropriate |
| // cycle to send the timing memory request to ruby |
| EventFunctionWrapper *mem_req_event = |
| computeUnit->memPort[mp_index].createMemReqEvent(new_pkt); |
| |
| DPRINTF(GPUPort, "CU%d: WF[%d][%d]: index %d, addr %#x data scheduled\n", |
| computeUnit->cu_id, gpuDynInst->simdId, |
| gpuDynInst->wfSlotId, mp_index, new_pkt->req->getPaddr()); |
| |
| computeUnit->schedule(mem_req_event, curTick() + |
| computeUnit->req_tick_latency); |
| |
| return true; |
| } |
| |
| EventFunctionWrapper* |
| ComputeUnit::DataPort::createMemReqEvent(PacketPtr pkt) |
| { |
| return new EventFunctionWrapper( |
| [this, pkt]{ processMemReqEvent(pkt); }, |
| "ComputeUnit memory request event", true); |
| } |
| |
| EventFunctionWrapper* |
| ComputeUnit::DataPort::createMemRespEvent(PacketPtr pkt) |
| { |
| return new EventFunctionWrapper( |
| [this, pkt]{ processMemRespEvent(pkt); }, |
| "ComputeUnit memory response event", true); |
| } |
| |
| void |
| ComputeUnit::DataPort::processMemReqEvent(PacketPtr pkt) |
| { |
| SenderState *sender_state = safe_cast<SenderState*>(pkt->senderState); |
| GPUDynInstPtr gpuDynInst = sender_state->_gpuDynInst; |
| [[maybe_unused]] ComputeUnit *compute_unit = computeUnit; |
| |
| if (!(sendTimingReq(pkt))) { |
| retries.push_back(std::make_pair(pkt, gpuDynInst)); |
| |
| DPRINTF(GPUPort, |
| "CU%d: WF[%d][%d]: index %d, addr %#x data req failed!\n", |
| compute_unit->cu_id, gpuDynInst->simdId, gpuDynInst->wfSlotId, |
| id, pkt->req->getPaddr()); |
| } else { |
| DPRINTF(GPUPort, |
| "CU%d: WF[%d][%d]: gpuDynInst: %d, index %d, addr %#x data " |
| "req sent!\n", compute_unit->cu_id, gpuDynInst->simdId, |
| gpuDynInst->wfSlotId, gpuDynInst->seqNum(), id, |
| pkt->req->getPaddr()); |
| } |
| } |
| |
| const char* |
| ComputeUnit::ScalarDataPort::MemReqEvent::description() const |
| { |
| return "ComputeUnit scalar memory request event"; |
| } |
| |
| void |
| ComputeUnit::ScalarDataPort::MemReqEvent::process() |
| { |
| SenderState *sender_state = safe_cast<SenderState*>(pkt->senderState); |
| GPUDynInstPtr gpuDynInst = sender_state->_gpuDynInst; |
| [[maybe_unused]] ComputeUnit *compute_unit = scalarDataPort.computeUnit; |
| |
| if (!(scalarDataPort.sendTimingReq(pkt))) { |
| scalarDataPort.retries.push_back(pkt); |
| |
| DPRINTF(GPUPort, |
| "CU%d: WF[%d][%d]: addr %#x data req failed!\n", |
| compute_unit->cu_id, gpuDynInst->simdId, |
| gpuDynInst->wfSlotId, pkt->req->getPaddr()); |
| } else { |
| DPRINTF(GPUPort, |
| "CU%d: WF[%d][%d]: gpuDynInst: %d, addr %#x data " |
| "req sent!\n", compute_unit->cu_id, gpuDynInst->simdId, |
| gpuDynInst->wfSlotId, gpuDynInst->seqNum(), |
| pkt->req->getPaddr()); |
| } |
| } |
| |
| /* |
| * The initial translation request could have been rejected, |
| * if <retries> queue is not Retry sending the translation |
| * request. sendRetry() is called from the peer port whenever |
| * a translation completes. |
| */ |
| void |
| ComputeUnit::DTLBPort::recvReqRetry() |
| { |
| int len = retries.size(); |
| |
| DPRINTF(GPUTLB, "CU%d: DTLB recvReqRetry - %d pending requests\n", |
| computeUnit->cu_id, len); |
| |
| assert(len > 0); |
| assert(isStalled()); |
| // recvReqRetry is an indication that the resource on which this |
| // port was stalling on is freed. So, remove the stall first |
| unstallPort(); |
| |
| for (int i = 0; i < len; ++i) { |
| PacketPtr pkt = retries.front(); |
| [[maybe_unused]] Addr vaddr = pkt->req->getVaddr(); |
| DPRINTF(GPUTLB, "CU%d: retrying D-translaton for address%#x", vaddr); |
| |
| if (!sendTimingReq(pkt)) { |
| // Stall port |
| stallPort(); |
| DPRINTF(GPUTLB, ": failed again\n"); |
| break; |
| } else { |
| DPRINTF(GPUTLB, ": successful\n"); |
| retries.pop_front(); |
| } |
| } |
| } |
| |
| bool |
| ComputeUnit::ScalarDTLBPort::recvTimingResp(PacketPtr pkt) |
| { |
| assert(pkt->senderState); |
| |
| GpuTranslationState *translation_state = |
| safe_cast<GpuTranslationState*>(pkt->senderState); |
| |
| // Page faults are not allowed |
| fatal_if(!translation_state->tlbEntry, |
| "Translation of vaddr %#x failed\n", pkt->req->getVaddr()); |
| |
| delete translation_state->tlbEntry; |
| assert(!translation_state->ports.size()); |
| |
| pkt->senderState = translation_state->saved; |
| delete translation_state; |
| |
| ScalarDTLBPort::SenderState *sender_state = |
| safe_cast<ScalarDTLBPort::SenderState*>(pkt->senderState); |
| |
| GPUDynInstPtr gpuDynInst = sender_state->_gpuDynInst; |
| delete pkt->senderState; |
| |
| [[maybe_unused]] Wavefront *w = gpuDynInst->wavefront(); |
| |
| DPRINTF(GPUTLB, "CU%d: WF[%d][%d][wv=%d]: scalar DTLB port received " |
| "translation: PA %#x -> %#x\n", computeUnit->cu_id, w->simdId, |
| w->wfSlotId, w->kernId, pkt->req->getVaddr(), pkt->req->getPaddr()); |
| |
| MemCmd mem_cmd; |
| |
| if (pkt->cmd == MemCmd::ReadResp) { |
| mem_cmd = MemCmd::ReadReq; |
| } else if (pkt->cmd == MemCmd::WriteResp) { |
| mem_cmd = MemCmd::WriteReq; |
| } else { |
| fatal("Scalar DTLB receieved unexpected MemCmd response %s\n", |
| pkt->cmd.toString()); |
| } |
| |
| PacketPtr req_pkt = new Packet(pkt->req, mem_cmd); |
| req_pkt->dataStatic(pkt->getPtr<uint8_t>()); |
| delete pkt; |
| |
| req_pkt->senderState = |
| new ComputeUnit::ScalarDataPort::SenderState(gpuDynInst); |
| |
| if (!computeUnit->scalarDataPort.sendTimingReq(req_pkt)) { |
| computeUnit->scalarDataPort.retries.push_back(req_pkt); |
| DPRINTF(GPUMem, "send scalar req failed for: %s\n", |
| gpuDynInst->disassemble()); |
| } else { |
| DPRINTF(GPUMem, "send scalar req for: %s\n", |
| gpuDynInst->disassemble()); |
| } |
| |
| return true; |
| } |
| |
| bool |
| ComputeUnit::ITLBPort::recvTimingResp(PacketPtr pkt) |
| { |
| [[maybe_unused]] Addr line = pkt->req->getPaddr(); |
| DPRINTF(GPUTLB, "CU%d: ITLBPort received %#x->%#x\n", |
| computeUnit->cu_id, pkt->req->getVaddr(), line); |
| |
| assert(pkt->senderState); |
| |
| // pop off the TLB translation state |
| GpuTranslationState *translation_state |
| = safe_cast<GpuTranslationState*>(pkt->senderState); |
| |
| bool success = translation_state->tlbEntry != nullptr; |
| delete translation_state->tlbEntry; |
| assert(!translation_state->ports.size()); |
| pkt->senderState = translation_state->saved; |
| delete translation_state; |
| |
| // use the original sender state to know how to close this transaction |
| ITLBPort::SenderState *sender_state = |
| safe_cast<ITLBPort::SenderState*>(pkt->senderState); |
| |
| // get the wavefront associated with this translation request |
| Wavefront *wavefront = sender_state->wavefront; |
| delete pkt->senderState; |
| |
| if (success) { |
| // pkt is reused in fetch(), don't delete it here. However, we must |
| // reset the command to be a request so that it can be sent through |
| // the cu's request port |
| assert(pkt->cmd == MemCmd::ReadResp); |
| pkt->cmd = MemCmd::ReadReq; |
| |
| computeUnit->fetchStage.fetch(pkt, wavefront); |
| } else { |
| if (wavefront->dropFetch) { |
| assert(wavefront->instructionBuffer.empty()); |
| wavefront->dropFetch = false; |
| } |
| |
| wavefront->pendingFetch = 0; |
| } |
| |
| return true; |
| } |
| |
| /* |
| * The initial translation request could have been rejected, if |
| * <retries> queue is not empty. Retry sending the translation |
| * request. sendRetry() is called from the peer port whenever |
| * a translation completes. |
| */ |
| void |
| ComputeUnit::ITLBPort::recvReqRetry() |
| { |
| |
| int len = retries.size(); |
| DPRINTF(GPUTLB, "CU%d: ITLB recvReqRetry - %d pending requests\n", len); |
| |
| assert(len > 0); |
| assert(isStalled()); |
| |
| // recvReqRetry is an indication that the resource on which this |
| // port was stalling on is freed. So, remove the stall first |
| unstallPort(); |
| |
| for (int i = 0; i < len; ++i) { |
| PacketPtr pkt = retries.front(); |
| [[maybe_unused]] Addr vaddr = pkt->req->getVaddr(); |
| DPRINTF(GPUTLB, "CU%d: retrying I-translaton for address%#x", vaddr); |
| |
| if (!sendTimingReq(pkt)) { |
| stallPort(); // Stall port |
| DPRINTF(GPUTLB, ": failed again\n"); |
| break; |
| } else { |
| DPRINTF(GPUTLB, ": successful\n"); |
| retries.pop_front(); |
| } |
| } |
| } |
| |
| void |
| ComputeUnit::updateInstStats(GPUDynInstPtr gpuDynInst) |
| { |
| if (gpuDynInst->isScalar()) { |
| if (gpuDynInst->isALU() && !gpuDynInst->isWaitcnt()) { |
| stats.sALUInsts++; |
| stats.instCyclesSALU++; |
| } else if (gpuDynInst->isLoad()) { |
| stats.scalarMemReads++; |
| } else if (gpuDynInst->isStore()) { |
| stats.scalarMemWrites++; |
| } |
| } else { |
| if (gpuDynInst->isALU()) { |
| shader->total_valu_insts++; |
| if (shader->total_valu_insts == shader->max_valu_insts) { |
| exitSimLoop("max vALU insts"); |
| } |
| stats.vALUInsts++; |
| stats.instCyclesVALU++; |
| stats.threadCyclesVALU |
| += gpuDynInst->wavefront()->execMask().count(); |
| } else if (gpuDynInst->isFlat()) { |
| if (gpuDynInst->isLocalMem()) { |
| stats.flatLDSInsts++; |
| } else { |
| stats.flatVMemInsts++; |
| } |
| } else if (gpuDynInst->isFlatGlobal()) { |
| stats.flatVMemInsts++; |
| } else if (gpuDynInst->isLocalMem()) { |
| stats.ldsNoFlatInsts++; |
| } else if (gpuDynInst->isLoad()) { |
| stats.vectorMemReads++; |
| } else if (gpuDynInst->isStore()) { |
| stats.vectorMemWrites++; |
| } |
| |
| if (gpuDynInst->isLoad()) { |
| switch (gpuDynInst->executedAs()) { |
| case enums::SC_SPILL: |
| stats.spillReads++; |
| break; |
| case enums::SC_GLOBAL: |
| stats.globalReads++; |
| break; |
| case enums::SC_GROUP: |
| stats.groupReads++; |
| break; |
| case enums::SC_PRIVATE: |
| stats.privReads++; |
| break; |
| case enums::SC_READONLY: |
| stats.readonlyReads++; |
| break; |
| case enums::SC_KERNARG: |
| stats.kernargReads++; |
| break; |
| case enums::SC_ARG: |
| stats.argReads++; |
| break; |
| case enums::SC_NONE: |
| /** |
| * this case can occur for flat mem insts |
| * who execute with EXEC = 0 |
| */ |
| break; |
| default: |
| fatal("%s has no valid segment\n", gpuDynInst->disassemble()); |
| break; |
| } |
| } else if (gpuDynInst->isStore()) { |
| switch (gpuDynInst->executedAs()) { |
| case enums::SC_SPILL: |
| stats.spillWrites++; |
| break; |
| case enums::SC_GLOBAL: |
| stats.globalWrites++; |
| break; |
| case enums::SC_GROUP: |
| stats.groupWrites++; |
| break; |
| case enums::SC_PRIVATE: |
| stats.privWrites++; |
| break; |
| case enums::SC_READONLY: |
| stats.readonlyWrites++; |
| break; |
| case enums::SC_KERNARG: |
| stats.kernargWrites++; |
| break; |
| case enums::SC_ARG: |
| stats.argWrites++; |
| break; |
| case enums::SC_NONE: |
| /** |
| * this case can occur for flat mem insts |
| * who execute with EXEC = 0 |
| */ |
| break; |
| default: |
| fatal("%s has no valid segment\n", gpuDynInst->disassemble()); |
| break; |
| } |
| } |
| } |
| } |
| |
| void |
| ComputeUnit::updatePageDivergenceDist(Addr addr) |
| { |
| Addr virt_page_addr = roundDown(addr, X86ISA::PageBytes); |
| |
| if (!pagesTouched.count(virt_page_addr)) |
| pagesTouched[virt_page_addr] = 1; |
| else |
| pagesTouched[virt_page_addr]++; |
| } |
| |
| void |
| ComputeUnit::exitCallback() |
| { |
| if (countPages) { |
| std::ostream *page_stat_file = simout.create(name().c_str())->stream(); |
| |
| *page_stat_file << "page, wavefront accesses, workitem accesses" << |
| std::endl; |
| |
| for (auto iter : pageAccesses) { |
| *page_stat_file << std::hex << iter.first << ","; |
| *page_stat_file << std::dec << iter.second.first << ","; |
| *page_stat_file << std::dec << iter.second.second << std::endl; |
| } |
| } |
| } |
| |
| bool |
| ComputeUnit::isDone() const |
| { |
| for (int i = 0; i < numVectorALUs; ++i) { |
| if (!isVectorAluIdle(i)) { |
| return false; |
| } |
| } |
| |
| // TODO: FIXME if more than 1 of any memory pipe supported |
| if (!srfToScalarMemPipeBus.rdy()) { |
| return false; |
| } |
| if (!vrfToGlobalMemPipeBus.rdy()) { |
| return false; |
| } |
| if (!vrfToLocalMemPipeBus.rdy()) { |
| return false; |
| } |
| |
| if (!globalMemoryPipe.isGMReqFIFOWrRdy() |
| || !localMemoryPipe.isLMReqFIFOWrRdy() |
| || !localMemoryPipe.isLMRespFIFOWrRdy() || !locMemToVrfBus.rdy() || |
| !glbMemToVrfBus.rdy() || !scalarMemToSrfBus.rdy()) { |
| return false; |
| } |
| |
| return true; |
| } |
| |
| int32_t |
| ComputeUnit::getRefCounter(const uint32_t dispatchId, |
| const uint32_t wgId) const |
| { |
| return lds.getRefCounter(dispatchId, wgId); |
| } |
| |
| bool |
| ComputeUnit::isVectorAluIdle(uint32_t simdId) const |
| { |
| assert(simdId < numVectorALUs); |
| |
| for (int i_wf = 0; i_wf < shader->n_wf; ++i_wf){ |
| if (wfList[simdId][i_wf]->getStatus() != Wavefront::S_STOPPED) { |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| /** |
| * send a general request to the LDS |
| * make sure to look at the return value here as your request might be |
| * NACK'd and returning false means that you have to have some backup plan |
| */ |
| bool |
| ComputeUnit::sendToLds(GPUDynInstPtr gpuDynInst) |
| { |
| // this is just a request to carry the GPUDynInstPtr |
| // back and forth |
| RequestPtr newRequest = std::make_shared<Request>(); |
| newRequest->setPaddr(0x0); |
| |
| // ReadReq is not evaluted by the LDS but the Packet ctor requires this |
| PacketPtr newPacket = new Packet(newRequest, MemCmd::ReadReq); |
| |
| // This is the SenderState needed upon return |
| newPacket->senderState = new LDSPort::SenderState(gpuDynInst); |
| |
| return ldsPort.sendTimingReq(newPacket); |
| } |
| |
| /** |
| * get the result of packets sent to the LDS when they return |
| */ |
| bool |
| ComputeUnit::LDSPort::recvTimingResp(PacketPtr packet) |
| { |
| const ComputeUnit::LDSPort::SenderState *senderState = |
| dynamic_cast<ComputeUnit::LDSPort::SenderState *>(packet->senderState); |
| |
| fatal_if(!senderState, "did not get the right sort of sender state"); |
| |
| GPUDynInstPtr gpuDynInst = senderState->getMemInst(); |
| |
| delete packet->senderState; |
| delete packet; |
| |
| computeUnit->localMemoryPipe.getLMRespFIFO().push(gpuDynInst); |
| return true; |
| } |
| |
| /** |
| * attempt to send this packet, either the port is already stalled, the request |
| * is nack'd and must stall or the request goes through |
| * when a request cannot be sent, add it to the retries queue |
| */ |
| bool |
| ComputeUnit::LDSPort::sendTimingReq(PacketPtr pkt) |
| { |
| ComputeUnit::LDSPort::SenderState *sender_state = |
| dynamic_cast<ComputeUnit::LDSPort::SenderState*>(pkt->senderState); |
| fatal_if(!sender_state, "packet without a valid sender state"); |
| |
| [[maybe_unused]] GPUDynInstPtr gpuDynInst = sender_state->getMemInst(); |
| |
| if (isStalled()) { |
| fatal_if(retries.empty(), "must have retries waiting to be stalled"); |
| |
| retries.push(pkt); |
| |
| DPRINTF(GPUPort, "CU%d: WF[%d][%d]: LDS send failed!\n", |
| computeUnit->cu_id, gpuDynInst->simdId, |
| gpuDynInst->wfSlotId); |
| return false; |
| } else if (!RequestPort::sendTimingReq(pkt)) { |
| // need to stall the LDS port until a recvReqRetry() is received |
| // this indicates that there is more space |
| stallPort(); |
| retries.push(pkt); |
| |
| DPRINTF(GPUPort, "CU%d: WF[%d][%d]: addr %#x lds req failed!\n", |
| computeUnit->cu_id, gpuDynInst->simdId, |
| gpuDynInst->wfSlotId, pkt->req->getPaddr()); |
| return false; |
| } else { |
| DPRINTF(GPUPort, "CU%d: WF[%d][%d]: addr %#x lds req sent!\n", |
| computeUnit->cu_id, gpuDynInst->simdId, |
| gpuDynInst->wfSlotId, pkt->req->getPaddr()); |
| return true; |
| } |
| } |
| |
| /** |
| * the bus is telling the port that there is now space so retrying stalled |
| * requests should work now |
| * this allows the port to have a request be nack'd and then have the receiver |
| * say when there is space, rather than simply retrying the send every cycle |
| */ |
| void |
| ComputeUnit::LDSPort::recvReqRetry() |
| { |
| auto queueSize = retries.size(); |
| |
| DPRINTF(GPUPort, "CU%d: LDSPort recvReqRetry - %d pending requests\n", |
| computeUnit->cu_id, queueSize); |
| |
| fatal_if(queueSize < 1, |
| "why was there a recvReqRetry() with no pending reqs?"); |
| fatal_if(!isStalled(), |
| "recvReqRetry() happened when the port was not stalled"); |
| |
| unstallPort(); |
| |
| while (!retries.empty()) { |
| PacketPtr packet = retries.front(); |
| |
| DPRINTF(GPUPort, "CU%d: retrying LDS send\n", computeUnit->cu_id); |
| |
| if (!RequestPort::sendTimingReq(packet)) { |
| // Stall port |
| stallPort(); |
| DPRINTF(GPUPort, ": LDS send failed again\n"); |
| break; |
| } else { |
| DPRINTF(GPUTLB, ": LDS send successful\n"); |
| retries.pop(); |
| } |
| } |
| } |
| |
| ComputeUnit::ComputeUnitStats::ComputeUnitStats(statistics::Group *parent, |
| int n_wf) |
| : statistics::Group(parent), |
| ADD_STAT(vALUInsts, "Number of vector ALU insts issued."), |
| ADD_STAT(vALUInstsPerWF, "The avg. number of vector ALU insts issued " |
| "per-wavefront."), |
| ADD_STAT(sALUInsts, "Number of scalar ALU insts issued."), |
| ADD_STAT(sALUInstsPerWF, "The avg. number of scalar ALU insts issued " |
| "per-wavefront."), |
| ADD_STAT(instCyclesVALU, |
| "Number of cycles needed to execute VALU insts."), |
| ADD_STAT(instCyclesSALU, |
| "Number of cycles needed to execute SALU insts."), |
| ADD_STAT(threadCyclesVALU, "Number of thread cycles used to execute " |
| "vector ALU ops. Similar to instCyclesVALU but multiplied by " |
| "the number of active threads."), |
| ADD_STAT(vALUUtilization, |
| "Percentage of active vector ALU threads in a wave."), |
| ADD_STAT(ldsNoFlatInsts, "Number of LDS insts issued, not including FLAT" |
| " accesses that resolve to LDS."), |
| ADD_STAT(ldsNoFlatInstsPerWF, "The avg. number of LDS insts (not " |
| "including FLAT accesses that resolve to LDS) per-wavefront."), |
| ADD_STAT(flatVMemInsts, |
| "The number of FLAT insts that resolve to vmem issued."), |
| ADD_STAT(flatVMemInstsPerWF, "The average number of FLAT insts that " |
| "resolve to vmem issued per-wavefront."), |
| ADD_STAT(flatLDSInsts, |
| "The number of FLAT insts that resolve to LDS issued."), |
| ADD_STAT(flatLDSInstsPerWF, "The average number of FLAT insts that " |
| "resolve to LDS issued per-wavefront."), |
| ADD_STAT(vectorMemWrites, |
| "Number of vector mem write insts (excluding FLAT insts)."), |
| ADD_STAT(vectorMemWritesPerWF, "The average number of vector mem write " |
| "insts (excluding FLAT insts) per-wavefront."), |
| ADD_STAT(vectorMemReads, |
| "Number of vector mem read insts (excluding FLAT insts)."), |
| ADD_STAT(vectorMemReadsPerWF, "The avg. number of vector mem read insts " |
| "(excluding FLAT insts) per-wavefront."), |
| ADD_STAT(scalarMemWrites, "Number of scalar mem write insts."), |
| ADD_STAT(scalarMemWritesPerWF, |
| "The average number of scalar mem write insts per-wavefront."), |
| ADD_STAT(scalarMemReads, "Number of scalar mem read insts."), |
| ADD_STAT(scalarMemReadsPerWF, |
| "The average number of scalar mem read insts per-wavefront."), |
| ADD_STAT(vectorMemReadsPerKiloInst, |
| "Number of vector mem reads per kilo-instruction"), |
| ADD_STAT(vectorMemWritesPerKiloInst, |
| "Number of vector mem writes per kilo-instruction"), |
| ADD_STAT(vectorMemInstsPerKiloInst, |
| "Number of vector mem insts per kilo-instruction"), |
| ADD_STAT(scalarMemReadsPerKiloInst, |
| "Number of scalar mem reads per kilo-instruction"), |
| ADD_STAT(scalarMemWritesPerKiloInst, |
| "Number of scalar mem writes per kilo-instruction"), |
| ADD_STAT(scalarMemInstsPerKiloInst, |
| "Number of scalar mem insts per kilo-instruction"), |
| ADD_STAT(instCyclesVMemPerSimd, "Number of cycles to send address, " |
| "command, data from VRF to vector memory unit, per SIMD"), |
| ADD_STAT(instCyclesScMemPerSimd, "Number of cycles to send address, " |
| "command, data from SRF to scalar memory unit, per SIMD"), |
| ADD_STAT(instCyclesLdsPerSimd, "Number of cycles to send address, " |
| "command, data from VRF to LDS unit, per SIMD"), |
| ADD_STAT(globalReads, "Number of reads to the global segment"), |
| ADD_STAT(globalWrites, "Number of writes to the global segment"), |
| ADD_STAT(globalMemInsts, |
| "Number of memory instructions sent to the global segment"), |
| ADD_STAT(argReads, "Number of reads to the arg segment"), |
| ADD_STAT(argWrites, "NUmber of writes to the arg segment"), |
| ADD_STAT(argMemInsts, |
| "Number of memory instructions sent to the arg segment"), |
| ADD_STAT(spillReads, "Number of reads to the spill segment"), |
| ADD_STAT(spillWrites, "Number of writes to the spill segment"), |
| ADD_STAT(spillMemInsts, |
| "Number of memory instructions sent to the spill segment"), |
| ADD_STAT(groupReads, "Number of reads to the group segment"), |
| ADD_STAT(groupWrites, "Number of writes to the group segment"), |
| ADD_STAT(groupMemInsts, |
| "Number of memory instructions sent to the group segment"), |
| ADD_STAT(privReads, "Number of reads to the private segment"), |
| ADD_STAT(privWrites, "Number of writes to the private segment"), |
| ADD_STAT(privMemInsts, |
| "Number of memory instructions sent to the private segment"), |
| ADD_STAT(readonlyReads, "Number of reads to the readonly segment"), |
| ADD_STAT(readonlyWrites, |
| "Number of memory instructions sent to the readonly segment"), |
| ADD_STAT(readonlyMemInsts, |
| "Number of memory instructions sent to the readonly segment"), |
| ADD_STAT(kernargReads, "Number of reads sent to the kernarg segment"), |
| ADD_STAT(kernargWrites, |
| "Number of memory instructions sent to the kernarg segment"), |
| ADD_STAT(kernargMemInsts, |
| "Number of memory instructions sent to the kernarg segment"), |
| ADD_STAT(waveLevelParallelism, |
| "wave level parallelism: count of active waves at wave launch"), |
| ADD_STAT(tlbRequests, "number of uncoalesced requests"), |
| ADD_STAT(tlbCycles, |
| "total number of cycles for all uncoalesced requests"), |
| ADD_STAT(tlbLatency, "Avg. translation latency for data translations"), |
| ADD_STAT(hitsPerTLBLevel, |
| "TLB hits distribution (0 for page table, x for Lx-TLB)"), |
| ADD_STAT(ldsBankAccesses, "Total number of LDS bank accesses"), |
| ADD_STAT(ldsBankConflictDist, |
| "Number of bank conflicts per LDS memory packet"), |
| ADD_STAT(pageDivergenceDist, |
| "pages touched per wf (over all mem. instr.)"), |
| ADD_STAT(dynamicGMemInstrCnt, |
| "dynamic non-flat global memory instruction count"), |
| ADD_STAT(dynamicFlatMemInstrCnt, |
| "dynamic flat global memory instruction count"), |
| ADD_STAT(dynamicLMemInstrCnt, "dynamic local memory intruction count"), |
| ADD_STAT(wgBlockedDueBarrierAllocation, |
| "WG dispatch was blocked due to lack of barrier resources"), |
| ADD_STAT(wgBlockedDueLdsAllocation, |
| "Workgroup blocked due to LDS capacity"), |
| ADD_STAT(numInstrExecuted, "number of instructions executed"), |
| ADD_STAT(execRateDist, "Instruction Execution Rate: Number of executed " |
| "vector instructions per cycle"), |
| ADD_STAT(numVecOpsExecuted, |
| "number of vec ops executed (e.g. WF size/inst)"), |
| ADD_STAT(numVecOpsExecutedF16, |
| "number of f16 vec ops executed (e.g. WF size/inst)"), |
| ADD_STAT(numVecOpsExecutedF32, |
| "number of f32 vec ops executed (e.g. WF size/inst)"), |
| ADD_STAT(numVecOpsExecutedF64, |
| "number of f64 vec ops executed (e.g. WF size/inst)"), |
| ADD_STAT(numVecOpsExecutedFMA16, |
| "number of fma16 vec ops executed (e.g. WF size/inst)"), |
| ADD_STAT(numVecOpsExecutedFMA32, |
| "number of fma32 vec ops executed (e.g. WF size/inst)"), |
| ADD_STAT(numVecOpsExecutedFMA64, |
| "number of fma64 vec ops executed (e.g. WF size/inst)"), |
| ADD_STAT(numVecOpsExecutedMAC16, |
| "number of mac16 vec ops executed (e.g. WF size/inst)"), |
| ADD_STAT(numVecOpsExecutedMAC32, |
| "number of mac32 vec ops executed (e.g. WF size/inst)"), |
| ADD_STAT(numVecOpsExecutedMAC64, |
| "number of mac64 vec ops executed (e.g. WF size/inst)"), |
| ADD_STAT(numVecOpsExecutedMAD16, |
| "number of mad16 vec ops executed (e.g. WF size/inst)"), |
| ADD_STAT(numVecOpsExecutedMAD32, |
| "number of mad32 vec ops executed (e.g. WF size/inst)"), |
| ADD_STAT(numVecOpsExecutedMAD64, |
| "number of mad64 vec ops executed (e.g. WF size/inst)"), |
| ADD_STAT(numVecOpsExecutedTwoOpFP, |
| "number of two op FP vec ops executed (e.g. WF size/inst)"), |
| ADD_STAT(totalCycles, "number of cycles the CU ran for"), |
| ADD_STAT(vpc, "Vector Operations per cycle (this CU only)"), |
| ADD_STAT(vpc_f16, "F16 Vector Operations per cycle (this CU only)"), |
| ADD_STAT(vpc_f32, "F32 Vector Operations per cycle (this CU only)"), |
| ADD_STAT(vpc_f64, "F64 Vector Operations per cycle (this CU only)"), |
| ADD_STAT(ipc, "Instructions per cycle (this CU only)"), |
| ADD_STAT(controlFlowDivergenceDist, "number of lanes active per " |
| "instruction (over all instructions)"), |
| ADD_STAT(activeLanesPerGMemInstrDist, |
| "number of active lanes per global memory instruction"), |
| ADD_STAT(activeLanesPerLMemInstrDist, |
| "number of active lanes per local memory instruction"), |
| ADD_STAT(numALUInstsExecuted, |
| "Number of dynamic non-GM memory insts executed"), |
| ADD_STAT(numTimesWgBlockedDueVgprAlloc, "Number of times WGs are " |
| "blocked due to VGPR allocation per SIMD"), |
| ADD_STAT(numTimesWgBlockedDueSgprAlloc, "Number of times WGs are " |
| "blocked due to SGPR allocation per SIMD"), |
| ADD_STAT(numCASOps, "number of compare and swap operations"), |
| ADD_STAT(numFailedCASOps, |
| "number of compare and swap operations that failed"), |
| ADD_STAT(completedWfs, "number of completed wavefronts"), |
| ADD_STAT(completedWGs, "number of completed workgroups"), |
| ADD_STAT(headTailLatency, "ticks between first and last cache block " |
| "arrival at coalescer"), |
| ADD_STAT(instInterleave, "Measure of instruction interleaving per SIMD") |
| { |
| ComputeUnit *cu = static_cast<ComputeUnit*>(parent); |
| |
| instCyclesVMemPerSimd.init(cu->numVectorALUs); |
| instCyclesScMemPerSimd.init(cu->numVectorALUs); |
| instCyclesLdsPerSimd.init(cu->numVectorALUs); |
| |
| hitsPerTLBLevel.init(4); |
| execRateDist.init(0, 10, 2); |
| ldsBankConflictDist.init(0, cu->wfSize(), 2); |
| |
| pageDivergenceDist.init(1, cu->wfSize(), 4); |
| controlFlowDivergenceDist.init(1, cu->wfSize(), 4); |
| activeLanesPerGMemInstrDist.init(1, cu->wfSize(), 4); |
| activeLanesPerLMemInstrDist.init(1, cu->wfSize(), 4); |
| |
| headTailLatency.init(0, 1000000, 10000).flags(statistics::pdf | |
| statistics::oneline); |
| waveLevelParallelism.init(0, n_wf * cu->numVectorALUs, 1); |
| instInterleave.init(cu->numVectorALUs, 0, 20, 1); |
| |
| vALUInstsPerWF = vALUInsts / completedWfs; |
| sALUInstsPerWF = sALUInsts / completedWfs; |
| vALUUtilization = (threadCyclesVALU / (64 * instCyclesVALU)) * 100; |
| ldsNoFlatInstsPerWF = ldsNoFlatInsts / completedWfs; |
| flatVMemInstsPerWF = flatVMemInsts / completedWfs; |
| flatLDSInstsPerWF = flatLDSInsts / completedWfs; |
| vectorMemWritesPerWF = vectorMemWrites / completedWfs; |
| vectorMemReadsPerWF = vectorMemReads / completedWfs; |
| scalarMemWritesPerWF = scalarMemWrites / completedWfs; |
| scalarMemReadsPerWF = scalarMemReads / completedWfs; |
| |
| vectorMemReadsPerKiloInst = (vectorMemReads / numInstrExecuted) * 1000; |
| vectorMemWritesPerKiloInst = (vectorMemWrites / numInstrExecuted) * 1000; |
| vectorMemInstsPerKiloInst = |
| ((vectorMemReads + vectorMemWrites) / numInstrExecuted) * 1000; |
| scalarMemReadsPerKiloInst = (scalarMemReads / numInstrExecuted) * 1000; |
| scalarMemWritesPerKiloInst = (scalarMemWrites / numInstrExecuted) * 1000; |
| scalarMemInstsPerKiloInst = |
| ((scalarMemReads + scalarMemWrites) / numInstrExecuted) * 1000; |
| |
| globalMemInsts = globalReads + globalWrites; |
| argMemInsts = argReads + argWrites; |
| spillMemInsts = spillReads + spillWrites; |
| groupMemInsts = groupReads + groupWrites; |
| privMemInsts = privReads + privWrites; |
| readonlyMemInsts = readonlyReads + readonlyWrites; |
| kernargMemInsts = kernargReads + kernargWrites; |
| |
| tlbLatency = tlbCycles / tlbRequests; |
| |
| // fixed number of TLB levels |
| for (int i = 0; i < 4; ++i) { |
| if (!i) |
| hitsPerTLBLevel.subname(i,"page_table"); |
| else |
| hitsPerTLBLevel.subname(i, csprintf("L%d_TLB",i)); |
| } |
| |
| ipc = numInstrExecuted / totalCycles; |
| vpc = numVecOpsExecuted / totalCycles; |
| vpc_f16 = numVecOpsExecutedF16 / totalCycles; |
| vpc_f32 = numVecOpsExecutedF32 / totalCycles; |
| vpc_f64 = numVecOpsExecutedF64 / totalCycles; |
| |
| numALUInstsExecuted = numInstrExecuted - dynamicGMemInstrCnt - |
| dynamicLMemInstrCnt; |
| } |
| |
| } // namespace gem5 |