| /* | |
| * Copyright (c) 2010-2013, 2015 ARM Limited | |
| * All rights reserved | |
| * | |
| * The license below extends only to copyright in the software and shall | |
| * not be construed as granting a license to any other intellectual | |
| * property including but not limited to intellectual property relating | |
| * to a hardware implementation of the functionality of the software | |
| * licensed hereunder. You may use the software subject to the license | |
| * terms below provided that you ensure that this notice is replicated | |
| * unmodified and in its entirety in all distributions of the software, | |
| * modified or unmodified, in source code or in binary form. | |
| * | |
| * Copyright (c) 2001-2005 The Regents of The University of Michigan | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are | |
| * met: redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer; | |
| * redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution; | |
| * neither the name of the copyright holders nor the names of its | |
| * contributors may be used to endorse or promote products derived from | |
| * this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| #include "mem/simple_mem.hh" | |
| #include "base/random.hh" | |
| #include "base/trace.hh" | |
| #include "debug/Drain.hh" | |
| namespace gem5 | |
| { | |
| namespace memory | |
| { | |
| SimpleMemory::SimpleMemory(const SimpleMemoryParams &p) : | |
| AbstractMemory(p), | |
| port(name() + ".port", *this), latency(p.latency), | |
| latency_var(p.latency_var), bandwidth(p.bandwidth), isBusy(false), | |
| retryReq(false), retryResp(false), | |
| releaseEvent([this]{ release(); }, name()), | |
| dequeueEvent([this]{ dequeue(); }, name()) | |
| { | |
| } | |
| void | |
| SimpleMemory::init() | |
| { | |
| AbstractMemory::init(); | |
| // allow unconnected memories as this is used in several ruby | |
| // systems at the moment | |
| if (port.isConnected()) { | |
| port.sendRangeChange(); | |
| } | |
| } | |
| Tick | |
| SimpleMemory::recvAtomic(PacketPtr pkt) | |
| { | |
| panic_if(pkt->cacheResponding(), "Should not see packets where cache " | |
| "is responding"); | |
| access(pkt); | |
| return getLatency(); | |
| } | |
| Tick | |
| SimpleMemory::recvAtomicBackdoor(PacketPtr pkt, MemBackdoorPtr &_backdoor) | |
| { | |
| Tick latency = recvAtomic(pkt); | |
| getBackdoor(_backdoor); | |
| return latency; | |
| } | |
| void | |
| SimpleMemory::recvFunctional(PacketPtr pkt) | |
| { | |
| pkt->pushLabel(name()); | |
| functionalAccess(pkt); | |
| bool done = false; | |
| auto p = packetQueue.begin(); | |
| // potentially update the packets in our packet queue as well | |
| while (!done && p != packetQueue.end()) { | |
| done = pkt->trySatisfyFunctional(p->pkt); | |
| ++p; | |
| } | |
| pkt->popLabel(); | |
| } | |
| void | |
| SimpleMemory::recvMemBackdoorReq(const MemBackdoorReq &req, | |
| MemBackdoorPtr &_backdoor) | |
| { | |
| getBackdoor(_backdoor); | |
| } | |
| bool | |
| SimpleMemory::recvTimingReq(PacketPtr pkt) | |
| { | |
| panic_if(pkt->cacheResponding(), "Should not see packets where cache " | |
| "is responding"); | |
| panic_if(!(pkt->isRead() || pkt->isWrite()), | |
| "Should only see read and writes at memory controller, " | |
| "saw %s to %#llx\n", pkt->cmdString(), pkt->getAddr()); | |
| // we should not get a new request after committing to retry the | |
| // current one, but unfortunately the CPU violates this rule, so | |
| // simply ignore it for now | |
| if (retryReq) | |
| return false; | |
| // if we are busy with a read or write, remember that we have to | |
| // retry | |
| if (isBusy) { | |
| retryReq = true; | |
| return false; | |
| } | |
| // technically the packet only reaches us after the header delay, | |
| // and since this is a memory controller we also need to | |
| // deserialise the payload before performing any write operation | |
| Tick receive_delay = pkt->headerDelay + pkt->payloadDelay; | |
| pkt->headerDelay = pkt->payloadDelay = 0; | |
| // update the release time according to the bandwidth limit, and | |
| // do so with respect to the time it takes to finish this request | |
| // rather than long term as it is the short term data rate that is | |
| // limited for any real memory | |
| // calculate an appropriate tick to release to not exceed | |
| // the bandwidth limit | |
| Tick duration = pkt->getSize() * bandwidth; | |
| // only consider ourselves busy if there is any need to wait | |
| // to avoid extra events being scheduled for (infinitely) fast | |
| // memories | |
| if (duration != 0) { | |
| schedule(releaseEvent, curTick() + duration); | |
| isBusy = true; | |
| } | |
| // go ahead and deal with the packet and put the response in the | |
| // queue if there is one | |
| bool needsResponse = pkt->needsResponse(); | |
| recvAtomic(pkt); | |
| // turn packet around to go back to requestor if response expected | |
| if (needsResponse) { | |
| // recvAtomic() should already have turned packet into | |
| // atomic response | |
| assert(pkt->isResponse()); | |
| Tick when_to_send = curTick() + receive_delay + getLatency(); | |
| // typically this should be added at the end, so start the | |
| // insertion sort with the last element, also make sure not to | |
| // re-order in front of some existing packet with the same | |
| // address, the latter is important as this memory effectively | |
| // hands out exclusive copies (shared is not asserted) | |
| auto i = packetQueue.end(); | |
| --i; | |
| while (i != packetQueue.begin() && when_to_send < i->tick && | |
| !i->pkt->matchAddr(pkt)) | |
| --i; | |
| // emplace inserts the element before the position pointed to by | |
| // the iterator, so advance it one step | |
| packetQueue.emplace(++i, pkt, when_to_send); | |
| if (!retryResp && !dequeueEvent.scheduled()) | |
| schedule(dequeueEvent, packetQueue.back().tick); | |
| } else { | |
| pendingDelete.reset(pkt); | |
| } | |
| return true; | |
| } | |
| void | |
| SimpleMemory::release() | |
| { | |
| assert(isBusy); | |
| isBusy = false; | |
| if (retryReq) { | |
| retryReq = false; | |
| port.sendRetryReq(); | |
| } | |
| } | |
| void | |
| SimpleMemory::dequeue() | |
| { | |
| assert(!packetQueue.empty()); | |
| DeferredPacket deferred_pkt = packetQueue.front(); | |
| retryResp = !port.sendTimingResp(deferred_pkt.pkt); | |
| if (!retryResp) { | |
| packetQueue.pop_front(); | |
| // if the queue is not empty, schedule the next dequeue event, | |
| // otherwise signal that we are drained if we were asked to do so | |
| if (!packetQueue.empty()) { | |
| // if there were packets that got in-between then we | |
| // already have an event scheduled, so use re-schedule | |
| reschedule(dequeueEvent, | |
| std::max(packetQueue.front().tick, curTick()), true); | |
| } else if (drainState() == DrainState::Draining) { | |
| DPRINTF(Drain, "Draining of SimpleMemory complete\n"); | |
| signalDrainDone(); | |
| } | |
| } | |
| } | |
| Tick | |
| SimpleMemory::getLatency() const | |
| { | |
| return latency + | |
| (latency_var ? random_mt.random<Tick>(0, latency_var) : 0); | |
| } | |
| void | |
| SimpleMemory::recvRespRetry() | |
| { | |
| assert(retryResp); | |
| dequeue(); | |
| } | |
| Port & | |
| SimpleMemory::getPort(const std::string &if_name, PortID idx) | |
| { | |
| if (if_name != "port") { | |
| return AbstractMemory::getPort(if_name, idx); | |
| } else { | |
| return port; | |
| } | |
| } | |
| DrainState | |
| SimpleMemory::drain() | |
| { | |
| if (!packetQueue.empty()) { | |
| DPRINTF(Drain, "SimpleMemory Queue has requests, waiting to drain\n"); | |
| return DrainState::Draining; | |
| } else { | |
| return DrainState::Drained; | |
| } | |
| } | |
| SimpleMemory::MemoryPort::MemoryPort(const std::string& _name, | |
| SimpleMemory& _memory) | |
| : ResponsePort(_name), mem(_memory) | |
| { } | |
| AddrRangeList | |
| SimpleMemory::MemoryPort::getAddrRanges() const | |
| { | |
| AddrRangeList ranges; | |
| ranges.push_back(mem.getAddrRange()); | |
| return ranges; | |
| } | |
| Tick | |
| SimpleMemory::MemoryPort::recvAtomic(PacketPtr pkt) | |
| { | |
| return mem.recvAtomic(pkt); | |
| } | |
| Tick | |
| SimpleMemory::MemoryPort::recvAtomicBackdoor( | |
| PacketPtr pkt, MemBackdoorPtr &_backdoor) | |
| { | |
| return mem.recvAtomicBackdoor(pkt, _backdoor); | |
| } | |
| void | |
| SimpleMemory::MemoryPort::recvFunctional(PacketPtr pkt) | |
| { | |
| mem.recvFunctional(pkt); | |
| } | |
| void | |
| SimpleMemory::MemoryPort::recvMemBackdoorReq(const MemBackdoorReq &req, | |
| MemBackdoorPtr &backdoor) | |
| { | |
| mem.recvMemBackdoorReq(req, backdoor); | |
| } | |
| bool | |
| SimpleMemory::MemoryPort::recvTimingReq(PacketPtr pkt) | |
| { | |
| return mem.recvTimingReq(pkt); | |
| } | |
| void | |
| SimpleMemory::MemoryPort::recvRespRetry() | |
| { | |
| mem.recvRespRetry(); | |
| } | |
| } // namespace memory | |
| } // namespace gem5 |