| /* |
| * Copyright (c) 2020 ARM Limited |
| * All rights reserved |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed here under. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /** |
| * @file |
| * Declaration of the NVM generator for issuing variable buffer |
| * hit length requests and bank utilisation. |
| */ |
| |
| #ifndef __CPU_TRAFFIC_GEN_HYBRID_GEN_HH__ |
| #define __CPU_TRAFFIC_GEN_HYBRID_GEN_HH__ |
| |
| #include "base/bitfield.hh" |
| #include "base/intmath.hh" |
| #include "base_gen.hh" |
| #include "enums/AddrMap.hh" |
| #include "mem/packet.hh" |
| |
| namespace gem5 |
| { |
| |
| /** |
| * Hybrid NVM + DRAM specific generator is for issuing request with variable |
| * buffer hit length and bank utilization. Currently assumes a single |
| * channel configuration. |
| */ |
| class HybridGen : public BaseGen |
| { |
| |
| public: |
| |
| /** |
| * Create a hybrid DRAM + NVM address sequence generator. |
| * |
| * @param obj SimObject owning this sequence generator |
| * @param requestor_id RequestorID related to the memory requests |
| * @param _duration duration of this state before transitioning |
| * @param start_addr_dram Start address for DRAM range |
| * @param end_addr_dram End address for DRAM range |
| * @param _blocksize_dram Size used for transactions injected |
| * @param start_addr_nvm Start address for NVM range |
| * @param end_addr_nvm End address for NVM range |
| * @param _blocksize_nvm Size used for transactions injected |
| * @param cacheline_size cache line size in the system |
| * @param min_period Lower limit of random inter-transaction time |
| * @param max_period Upper limit of random inter-transaction time |
| * @param read_percent Percent of transactions that are reads |
| * @param data_limit Upper limit on how much data to read/write |
| * @param num_seq_pkts_dram Number of packets per stride, each _blocksize |
| * @param page_size_dram Buffer size (bytes) used in the NVM |
| * @param nbr_of_banks_dram Total number of parallel banks in NVM |
| * @param nbr_of_banks_util_dram Number of banks to utilized, |
| * for N banks, we will use banks: 0->(N-1) |
| * @param num_seq_pkts_nvm Number of packets per stride, each _blocksize |
| * @param buffer_size_nvm Buffer size (bytes) used in the NVM |
| * @param nbr_of_banks_nvm Total number of parallel banks in NVM |
| * @param nbr_of_banks_util_nvm Number of banks to utilized, |
| * for N banks, we will use banks: 0->(N-1) |
| * @param addr_mapping Address mapping to be used, |
| * assumes single channel system |
| * @param nbr_of_ranks_dram Number of DRAM ranks |
| * @param nbr_of_ranks_nvm Number of NVM ranks |
| * @param nvm_percent Percentage of traffic going to NVM |
| */ |
| HybridGen(SimObject &obj, |
| RequestorID requestor_id, Tick _duration, |
| Addr start_addr_dram, Addr end_addr_dram, |
| Addr blocksize_dram, |
| Addr start_addr_nvm, Addr end_addr_nvm, |
| Addr blocksize_nvm, |
| Addr cacheline_size, |
| Tick min_period, Tick max_period, |
| uint8_t read_percent, Addr data_limit, |
| unsigned int num_seq_pkts_dram, unsigned int page_size_dram, |
| unsigned int nbr_of_banks_dram, unsigned int nbr_of_banks_util_dram, |
| unsigned int num_seq_pkts_nvm, unsigned int buffer_size_nvm, |
| unsigned int nbr_of_banks_nvm, unsigned int nbr_of_banks_util_nvm, |
| enums::AddrMap addr_mapping, |
| unsigned int nbr_of_ranks_dram, |
| unsigned int nbr_of_ranks_nvm, |
| uint8_t nvm_percent); |
| |
| void enter(); |
| |
| PacketPtr getNextPacket(); |
| |
| /** Insert bank, rank, and column bits into packed |
| * address to create address for 1st command in a |
| * series |
| * @param new_bank Bank number of next packet series |
| * @param new_rank Rank value of next packet series |
| */ |
| void genStartAddr(unsigned int new_bank , unsigned int new_rank); |
| |
| Tick nextPacketTick(bool elastic, Tick delay) const; |
| |
| protected: |
| /** Start of DRAM address range */ |
| const Addr startAddrDram; |
| |
| /** End of DRAM address range */ |
| const Addr endAddrDram; |
| |
| /** Blocksize and address increment for DRAM */ |
| const Addr blocksizeDram; |
| |
| /** Start of DRAM address range */ |
| const Addr startAddrNvm; |
| |
| /** End of DRAM address range */ |
| const Addr endAddrNvm; |
| |
| /** Blocksize and address increment for DRAM */ |
| const Addr blocksizeNvm; |
| |
| /** Cache line size in the simulated system */ |
| const Addr cacheLineSize; |
| |
| /** Request generation period */ |
| const Tick minPeriod; |
| const Tick maxPeriod; |
| |
| /** Percent of generated transactions that should be reads */ |
| const uint8_t readPercent; |
| |
| /** Maximum amount of data to manipulate */ |
| const Addr dataLimit; |
| |
| /** Number of sequential packets to be generated per cpu request */ |
| const unsigned int numSeqPktsDram; |
| const unsigned int numSeqPktsNvm; |
| |
| /** Track number of sequential packets generated for a request */ |
| unsigned int countNumSeqPkts; |
| |
| /** Address of request */ |
| Addr addr; |
| |
| /** Page size of DRAM */ |
| const unsigned int pageSizeDram; |
| |
| /** Number of page bits in DRAM address */ |
| const unsigned int pageBitsDram; |
| |
| /** Number of bank bits in DRAM address*/ |
| const unsigned int bankBitsDram; |
| |
| /** Number of block bits in DRAM address */ |
| const unsigned int blockBitsDram; |
| |
| /** Number of banks in DRAM */ |
| const unsigned int nbrOfBanksDram; |
| |
| /** Number of banks to be utilized for a given configuration */ |
| const unsigned int nbrOfBanksUtilDram; |
| |
| /** Buffer size of NVM */ |
| const unsigned int bufferSizeNvm; |
| |
| /** Number of buffer bits in NVM address */ |
| const unsigned int pageBitsNvm; |
| |
| /** Number of bank bits in NVM address*/ |
| const unsigned int bankBitsNvm; |
| |
| /** Number of block bits in NVM address */ |
| const unsigned int blockBitsNvm; |
| |
| /** Number of banks in NVM */ |
| const unsigned int nbrOfBanksNvm; |
| |
| /** Number of banks to be utilized for a given configuration */ |
| const unsigned int nbrOfBanksUtilNvm; |
| |
| /** Address mapping to be used */ |
| enums::AddrMap addrMapping; |
| |
| /** Number of ranks to be utilized for a given configuration */ |
| const unsigned int nbrOfRanksDram; |
| |
| /** Number of rank bits in DRAM address*/ |
| const unsigned int rankBitsDram; |
| |
| /** Number of ranks to be utilized for a given configuration */ |
| const unsigned int nbrOfRanksNvm; |
| |
| /** Number of rank bits in DRAM address*/ |
| const unsigned int rankBitsNvm; |
| |
| /** Percent of generated transactions that should go to NVM */ |
| const uint8_t nvmPercent; |
| |
| /** Remember type of requests to be generated in series */ |
| bool isRead; |
| |
| /** Remember the interface to be generated in series */ |
| bool isNvm; |
| |
| /** |
| * Counter to determine the amount of data |
| * manipulated. Used to determine if we should continue |
| * generating requests. |
| */ |
| Addr dataManipulated; |
| |
| /** Number of sequential DRAM packets to be generated per cpu request */ |
| unsigned int numSeqPkts; |
| |
| /** Start of address range */ |
| Addr startAddr; |
| |
| /** End of address range */ |
| Addr endAddr; |
| |
| /** Blocksize and address increment */ |
| Addr blocksize; |
| |
| /** Page size of DRAM */ |
| unsigned int pageSize; |
| |
| /** Number of page bits in DRAM address */ |
| unsigned int pageBits; |
| |
| /** Number of bank bits in DRAM address*/ |
| unsigned int bankBits; |
| |
| /** Number of block bits in DRAM address */ |
| unsigned int blockBits; |
| |
| /** Number of banks in DRAM */ |
| unsigned int nbrOfBanks; |
| |
| /** Number of banks to be utilized for a given configuration */ |
| unsigned int nbrOfBanksUtil; |
| |
| /** Number of ranks to be utilized for a given configuration */ |
| unsigned int nbrOfRanks; |
| |
| /** Number of rank bits in DRAM address*/ |
| unsigned int rankBits; |
| |
| }; |
| |
| } // namespace gem5 |
| |
| #endif |