blob: ff3bbe8f0eff61541dee6c45209e9d39bbb74de1 [file] [log] [blame]
/*
* Copyright (c) 2012-2013 ARM Limited
* All rights reserved.
*
* The license below extends only to copyright in the software and shall
* not be construed as granting a license to any other intellectual
* property including but not limited to intellectual property relating
* to a hardware implementation of the functionality of the software
* licensed hereunder. You may use the software subject to the license
* terms below provided that you ensure that this notice is replicated
* unmodified and in its entirety in all distributions of the software,
* modified or unmodified, in source code or in binary form.
*
* Copyright (c) 2009-2013 Advanced Micro Devices, Inc.
* Copyright (c) 2011 Mark D. Hill and David A. Wood
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "mem/ruby/system/RubyPort.hh"
#include "cpu/testers/rubytest/RubyTester.hh"
#include "debug/Config.hh"
#include "debug/Drain.hh"
#include "debug/Ruby.hh"
#include "mem/protocol/AccessPermission.hh"
#include "mem/ruby/slicc_interface/AbstractController.hh"
#include "mem/simple_mem.hh"
#include "sim/full_system.hh"
#include "sim/system.hh"
RubyPort::RubyPort(const Params *p)
: ClockedObject(p), m_ruby_system(p->ruby_system), m_version(p->version),
m_controller(NULL), m_mandatory_q_ptr(NULL),
m_usingRubyTester(p->using_ruby_tester), system(p->system),
pioMasterPort(csprintf("%s.pio-master-port", name()), this),
pioSlavePort(csprintf("%s.pio-slave-port", name()), this),
memMasterPort(csprintf("%s.mem-master-port", name()), this),
memSlavePort(csprintf("%s-mem-slave-port", name()), this,
p->ruby_system->getAccessBackingStore(), -1,
p->no_retry_on_stall),
gotAddrRanges(p->port_master_connection_count),
m_isCPUSequencer(p->is_cpu_sequencer)
{
assert(m_version != -1);
// create the slave ports based on the number of connected ports
for (size_t i = 0; i < p->port_slave_connection_count; ++i) {
slave_ports.push_back(new MemSlavePort(csprintf("%s.slave%d", name(),
i), this, p->ruby_system->getAccessBackingStore(),
i, p->no_retry_on_stall));
}
// create the master ports based on the number of connected ports
for (size_t i = 0; i < p->port_master_connection_count; ++i) {
master_ports.push_back(new PioMasterPort(csprintf("%s.master%d",
name(), i), this));
}
}
void
RubyPort::init()
{
assert(m_controller != NULL);
m_mandatory_q_ptr = m_controller->getMandatoryQueue();
}
Port &
RubyPort::getPort(const std::string &if_name, PortID idx)
{
if (if_name == "mem_master_port") {
return memMasterPort;
} else if (if_name == "pio_master_port") {
return pioMasterPort;
} else if (if_name == "mem_slave_port") {
return memSlavePort;
} else if (if_name == "pio_slave_port") {
return pioSlavePort;
} else if (if_name == "master") {
// used by the x86 CPUs to connect the interrupt PIO and interrupt
// slave port
if (idx >= static_cast<PortID>(master_ports.size())) {
panic("RubyPort::getPort master: unknown index %d\n", idx);
}
return *master_ports[idx];
} else if (if_name == "slave") {
// used by the CPUs to connect the caches to the interconnect, and
// for the x86 case also the interrupt master
if (idx >= static_cast<PortID>(slave_ports.size())) {
panic("RubyPort::getPort slave: unknown index %d\n", idx);
}
return *slave_ports[idx];
}
// pass it along to our super class
return ClockedObject::getPort(if_name, idx);
}
RubyPort::PioMasterPort::PioMasterPort(const std::string &_name,
RubyPort *_port)
: QueuedMasterPort(_name, _port, reqQueue, snoopRespQueue),
reqQueue(*_port, *this), snoopRespQueue(*_port, *this)
{
DPRINTF(RubyPort, "Created master pioport on sequencer %s\n", _name);
}
RubyPort::PioSlavePort::PioSlavePort(const std::string &_name,
RubyPort *_port)
: QueuedSlavePort(_name, _port, queue), queue(*_port, *this)
{
DPRINTF(RubyPort, "Created slave pioport on sequencer %s\n", _name);
}
RubyPort::MemMasterPort::MemMasterPort(const std::string &_name,
RubyPort *_port)
: QueuedMasterPort(_name, _port, reqQueue, snoopRespQueue),
reqQueue(*_port, *this), snoopRespQueue(*_port, *this)
{
DPRINTF(RubyPort, "Created master memport on ruby sequencer %s\n", _name);
}
RubyPort::MemSlavePort::MemSlavePort(const std::string &_name, RubyPort *_port,
bool _access_backing_store, PortID id,
bool _no_retry_on_stall)
: QueuedSlavePort(_name, _port, queue, id), queue(*_port, *this),
access_backing_store(_access_backing_store),
no_retry_on_stall(_no_retry_on_stall)
{
DPRINTF(RubyPort, "Created slave memport on ruby sequencer %s\n", _name);
}
bool
RubyPort::PioMasterPort::recvTimingResp(PacketPtr pkt)
{
RubyPort *rp = static_cast<RubyPort *>(&owner);
DPRINTF(RubyPort, "Response for address: 0x%#x\n", pkt->getAddr());
// send next cycle
rp->pioSlavePort.schedTimingResp(
pkt, curTick() + rp->m_ruby_system->clockPeriod());
return true;
}
bool RubyPort::MemMasterPort::recvTimingResp(PacketPtr pkt)
{
// got a response from a device
assert(pkt->isResponse());
// First we must retrieve the request port from the sender State
RubyPort::SenderState *senderState =
safe_cast<RubyPort::SenderState *>(pkt->popSenderState());
MemSlavePort *port = senderState->port;
assert(port != NULL);
delete senderState;
// In FS mode, ruby memory will receive pio responses from devices
// and it must forward these responses back to the particular CPU.
DPRINTF(RubyPort, "Pio response for address %#x, going to %s\n",
pkt->getAddr(), port->name());
// attempt to send the response in the next cycle
RubyPort *rp = static_cast<RubyPort *>(&owner);
port->schedTimingResp(pkt, curTick() + rp->m_ruby_system->clockPeriod());
return true;
}
bool
RubyPort::PioSlavePort::recvTimingReq(PacketPtr pkt)
{
RubyPort *ruby_port = static_cast<RubyPort *>(&owner);
for (size_t i = 0; i < ruby_port->master_ports.size(); ++i) {
AddrRangeList l = ruby_port->master_ports[i]->getAddrRanges();
for (auto it = l.begin(); it != l.end(); ++it) {
if (it->contains(pkt->getAddr())) {
// generally it is not safe to assume success here as
// the port could be blocked
bool M5_VAR_USED success =
ruby_port->master_ports[i]->sendTimingReq(pkt);
assert(success);
return true;
}
}
}
panic("Should never reach here!\n");
}
Tick
RubyPort::PioSlavePort::recvAtomic(PacketPtr pkt)
{
RubyPort *ruby_port = static_cast<RubyPort *>(&owner);
// Only atomic_noncaching mode supported!
if (!ruby_port->system->bypassCaches()) {
panic("Ruby supports atomic accesses only in noncaching mode\n");
}
for (size_t i = 0; i < ruby_port->master_ports.size(); ++i) {
AddrRangeList l = ruby_port->master_ports[i]->getAddrRanges();
for (auto it = l.begin(); it != l.end(); ++it) {
if (it->contains(pkt->getAddr())) {
return ruby_port->master_ports[i]->sendAtomic(pkt);
}
}
}
panic("Could not find address in Ruby PIO address ranges!\n");
}
bool
RubyPort::MemSlavePort::recvTimingReq(PacketPtr pkt)
{
DPRINTF(RubyPort, "Timing request for address %#x on port %d\n",
pkt->getAddr(), id);
RubyPort *ruby_port = static_cast<RubyPort *>(&owner);
if (pkt->cacheResponding())
panic("RubyPort should never see request with the "
"cacheResponding flag set\n");
// ruby doesn't support cache maintenance operations at the
// moment, as a workaround, we respond right away
if (pkt->req->isCacheMaintenance()) {
warn_once("Cache maintenance operations are not supported in Ruby.\n");
pkt->makeResponse();
schedTimingResp(pkt, curTick());
return true;
}
// Check for pio requests and directly send them to the dedicated
// pio port.
if (pkt->cmd != MemCmd::MemFenceReq) {
if (!isPhysMemAddress(pkt->getAddr())) {
assert(ruby_port->memMasterPort.isConnected());
DPRINTF(RubyPort, "Request address %#x assumed to be a "
"pio address\n", pkt->getAddr());
// Save the port in the sender state object to be used later to
// route the response
pkt->pushSenderState(new SenderState(this));
// send next cycle
RubySystem *rs = ruby_port->m_ruby_system;
ruby_port->memMasterPort.schedTimingReq(pkt,
curTick() + rs->clockPeriod());
return true;
}
assert(getOffset(pkt->getAddr()) + pkt->getSize() <=
RubySystem::getBlockSizeBytes());
}
// Submit the ruby request
RequestStatus requestStatus = ruby_port->makeRequest(pkt);
// If the request successfully issued then we should return true.
// Otherwise, we need to tell the port to retry at a later point
// and return false.
if (requestStatus == RequestStatus_Issued) {
// Save the port in the sender state object to be used later to
// route the response
pkt->pushSenderState(new SenderState(this));
DPRINTF(RubyPort, "Request %s address %#x issued\n", pkt->cmdString(),
pkt->getAddr());
return true;
}
if (pkt->cmd != MemCmd::MemFenceReq) {
DPRINTF(RubyPort,
"Request %s for address %#x did not issue because %s\n",
pkt->cmdString(), pkt->getAddr(),
RequestStatus_to_string(requestStatus));
}
addToRetryList();
return false;
}
Tick
RubyPort::MemSlavePort::recvAtomic(PacketPtr pkt)
{
RubyPort *ruby_port = static_cast<RubyPort *>(&owner);
// Only atomic_noncaching mode supported!
if (!ruby_port->system->bypassCaches()) {
panic("Ruby supports atomic accesses only in noncaching mode\n");
}
// Check for pio requests and directly send them to the dedicated
// pio port.
if (pkt->cmd != MemCmd::MemFenceReq) {
if (!isPhysMemAddress(pkt->getAddr())) {
assert(ruby_port->memMasterPort.isConnected());
DPRINTF(RubyPort, "Request address %#x assumed to be a "
"pio address\n", pkt->getAddr());
// Save the port in the sender state object to be used later to
// route the response
pkt->pushSenderState(new SenderState(this));
// send next cycle
Tick req_ticks = ruby_port->memMasterPort.sendAtomic(pkt);
return ruby_port->ticksToCycles(req_ticks);
}
assert(getOffset(pkt->getAddr()) + pkt->getSize() <=
RubySystem::getBlockSizeBytes());
}
// Find appropriate directory for address
// This assumes that protocols have a Directory machine,
// which has its memPort hooked up to memory. This can
// fail for some custom protocols.
MachineID id = ruby_port->m_controller->mapAddressToMachine(
pkt->getAddr(), MachineType_Directory);
RubySystem *rs = ruby_port->m_ruby_system;
AbstractController *directory =
rs->m_abstract_controls[id.getType()][id.getNum()];
return directory->recvAtomic(pkt);
}
void
RubyPort::MemSlavePort::addToRetryList()
{
RubyPort *ruby_port = static_cast<RubyPort *>(&owner);
//
// Unless the requestor do not want retries (e.g., the Ruby tester),
// record the stalled M5 port for later retry when the sequencer
// becomes free.
//
if (!no_retry_on_stall && !ruby_port->onRetryList(this)) {
ruby_port->addToRetryList(this);
}
}
void
RubyPort::MemSlavePort::recvFunctional(PacketPtr pkt)
{
DPRINTF(RubyPort, "Functional access for address: %#x\n", pkt->getAddr());
RubyPort *rp M5_VAR_USED = static_cast<RubyPort *>(&owner);
RubySystem *rs = rp->m_ruby_system;
// Check for pio requests and directly send them to the dedicated
// pio port.
if (!isPhysMemAddress(pkt->getAddr())) {
DPRINTF(RubyPort, "Pio Request for address: 0x%#x\n", pkt->getAddr());
assert(rp->pioMasterPort.isConnected());
rp->pioMasterPort.sendFunctional(pkt);
return;
}
assert(pkt->getAddr() + pkt->getSize() <=
makeLineAddress(pkt->getAddr()) + RubySystem::getBlockSizeBytes());
if (access_backing_store) {
// The attached physmem contains the official version of data.
// The following command performs the real functional access.
// This line should be removed once Ruby supplies the official version
// of data.
rs->getPhysMem()->functionalAccess(pkt);
} else {
bool accessSucceeded = false;
bool needsResponse = pkt->needsResponse();
// Do the functional access on ruby memory
if (pkt->isRead()) {
accessSucceeded = rs->functionalRead(pkt);
} else if (pkt->isWrite()) {
accessSucceeded = rs->functionalWrite(pkt);
} else {
panic("Unsupported functional command %s\n", pkt->cmdString());
}
// Unless the requester explicitly said otherwise, generate an error if
// the functional request failed
if (!accessSucceeded && !pkt->suppressFuncError()) {
fatal("Ruby functional %s failed for address %#x\n",
pkt->isWrite() ? "write" : "read", pkt->getAddr());
}
// turn packet around to go back to requester if response expected
if (needsResponse) {
pkt->setFunctionalResponseStatus(accessSucceeded);
}
DPRINTF(RubyPort, "Functional access %s!\n",
accessSucceeded ? "successful":"failed");
}
}
void
RubyPort::ruby_hit_callback(PacketPtr pkt)
{
DPRINTF(RubyPort, "Hit callback for %s 0x%x\n", pkt->cmdString(),
pkt->getAddr());
// The packet was destined for memory and has not yet been turned
// into a response
assert(system->isMemAddr(pkt->getAddr()));
assert(pkt->isRequest());
// First we must retrieve the request port from the sender State
RubyPort::SenderState *senderState =
safe_cast<RubyPort::SenderState *>(pkt->popSenderState());
MemSlavePort *port = senderState->port;
assert(port != NULL);
delete senderState;
port->hitCallback(pkt);
trySendRetries();
}
void
RubyPort::trySendRetries()
{
//
// If we had to stall the MemSlavePorts, wake them up because the sequencer
// likely has free resources now.
//
if (!retryList.empty()) {
// Record the current list of ports to retry on a temporary list
// before calling sendRetryReq on those ports. sendRetryReq will cause
// an immediate retry, which may result in the ports being put back on
// the list. Therefore we want to clear the retryList before calling
// sendRetryReq.
std::vector<MemSlavePort *> curRetryList(retryList);
retryList.clear();
for (auto i = curRetryList.begin(); i != curRetryList.end(); ++i) {
DPRINTF(RubyPort,
"Sequencer may now be free. SendRetry to port %s\n",
(*i)->name());
(*i)->sendRetryReq();
}
}
}
void
RubyPort::testDrainComplete()
{
//If we weren't able to drain before, we might be able to now.
if (drainState() == DrainState::Draining) {
unsigned int drainCount = outstandingCount();
DPRINTF(Drain, "Drain count: %u\n", drainCount);
if (drainCount == 0) {
DPRINTF(Drain, "RubyPort done draining, signaling drain done\n");
signalDrainDone();
}
}
}
DrainState
RubyPort::drain()
{
if (isDeadlockEventScheduled()) {
descheduleDeadlockEvent();
}
//
// If the RubyPort is not empty, then it needs to clear all outstanding
// requests before it should call signalDrainDone()
//
DPRINTF(Config, "outstanding count %d\n", outstandingCount());
if (outstandingCount() > 0) {
DPRINTF(Drain, "RubyPort not drained\n");
return DrainState::Draining;
} else {
return DrainState::Drained;
}
}
void
RubyPort::MemSlavePort::hitCallback(PacketPtr pkt)
{
bool needsResponse = pkt->needsResponse();
// Unless specified at configuraiton, all responses except failed SC
// and Flush operations access M5 physical memory.
bool accessPhysMem = access_backing_store;
if (pkt->isLLSC()) {
if (pkt->isWrite()) {
if (pkt->req->getExtraData() != 0) {
//
// Successful SC packets convert to normal writes
//
pkt->convertScToWrite();
} else {
//
// Failed SC packets don't access physical memory and thus
// the RubyPort itself must convert it to a response.
//
accessPhysMem = false;
}
} else {
//
// All LL packets convert to normal loads so that M5 PhysMem does
// not lock the blocks.
//
pkt->convertLlToRead();
}
}
// Flush, acquire, release requests don't access physical memory
if (pkt->isFlush() || pkt->cmd == MemCmd::MemFenceReq) {
accessPhysMem = false;
}
if (pkt->req->isKernel()) {
accessPhysMem = false;
needsResponse = true;
}
DPRINTF(RubyPort, "Hit callback needs response %d\n", needsResponse);
RubyPort *ruby_port = static_cast<RubyPort *>(&owner);
RubySystem *rs = ruby_port->m_ruby_system;
if (accessPhysMem) {
rs->getPhysMem()->access(pkt);
} else if (needsResponse) {
pkt->makeResponse();
}
// turn packet around to go back to requester if response expected
if (needsResponse) {
DPRINTF(RubyPort, "Sending packet back over port\n");
// Send a response in the same cycle. There is no need to delay the
// response because the response latency is already incurred in the
// Ruby protocol.
schedTimingResp(pkt, curTick());
} else {
delete pkt;
}
DPRINTF(RubyPort, "Hit callback done!\n");
}
AddrRangeList
RubyPort::PioSlavePort::getAddrRanges() const
{
// at the moment the assumption is that the master does not care
AddrRangeList ranges;
RubyPort *ruby_port = static_cast<RubyPort *>(&owner);
for (size_t i = 0; i < ruby_port->master_ports.size(); ++i) {
ranges.splice(ranges.begin(),
ruby_port->master_ports[i]->getAddrRanges());
}
for (const auto M5_VAR_USED &r : ranges)
DPRINTF(RubyPort, "%s\n", r.to_string());
return ranges;
}
bool
RubyPort::MemSlavePort::isPhysMemAddress(Addr addr) const
{
RubyPort *ruby_port = static_cast<RubyPort *>(&owner);
return ruby_port->system->isMemAddr(addr);
}
void
RubyPort::ruby_eviction_callback(Addr address)
{
DPRINTF(RubyPort, "Sending invalidations.\n");
// Allocate the invalidate request and packet on the stack, as it is
// assumed they will not be modified or deleted by receivers.
// TODO: should this really be using funcMasterId?
auto request = std::make_shared<Request>(
address, RubySystem::getBlockSizeBytes(), 0,
Request::funcMasterId);
// Use a single packet to signal all snooping ports of the invalidation.
// This assumes that snooping ports do NOT modify the packet/request
Packet pkt(request, MemCmd::InvalidateReq);
for (CpuPortIter p = slave_ports.begin(); p != slave_ports.end(); ++p) {
// check if the connected master port is snooping
if ((*p)->isSnooping()) {
// send as a snoop request
(*p)->sendTimingSnoopReq(&pkt);
}
}
}
void
RubyPort::PioMasterPort::recvRangeChange()
{
RubyPort &r = static_cast<RubyPort &>(owner);
r.gotAddrRanges--;
if (r.gotAddrRanges == 0 && FullSystem) {
r.pioSlavePort.sendRangeChange();
}
}