| # Copyright (c) 2019 ARM Limited |
| # All rights reserved. |
| # |
| # The license below extends only to copyright in the software and shall |
| # not be construed as granting a license to any other intellectual |
| # property including but not limited to intellectual property relating |
| # to a hardware implementation of the functionality of the software |
| # licensed hereunder. You may use the software subject to the license |
| # terms below provided that you ensure that this notice is replicated |
| # unmodified and in its entirety in all distributions of the software, |
| # modified or unmodified, in source code or in binary form. |
| # |
| # Copyright (c) 2015 Advanced Micro Devices, Inc. |
| # All rights reserved |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are |
| # met: redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer; |
| # redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution; |
| # neither the name of the copyright holders nor the names of its |
| # contributors may be used to endorse or promote products derived from |
| # this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| import m5 |
| from m5.objects import * |
| from m5.util.convert import * |
| |
| from functools import reduce |
| import operator, os, platform, getpass |
| from os import mkdir, makedirs, getpid, listdir, stat, access |
| from pwd import getpwuid |
| from os.path import join as joinpath |
| from os.path import isdir |
| from shutil import rmtree, copyfile |
| |
| def hex_mask(terms): |
| dec_mask = reduce(operator.or_, [2**i for i in terms], 0) |
| return "%08x" % dec_mask |
| |
| def file_append(path, contents): |
| with open(joinpath(*path), 'a') as f: |
| f.write(str(contents)) |
| |
| def replace_tree(path): |
| if isdir(path): |
| rmtree(path) |
| mkdir(path) |
| |
| def config_filesystem(system, options = None): |
| """ This function parses the system object to create the pseudo file system |
| @param system: The system to create the config for |
| @param options: An optional argument which contains an Options.py options |
| object. This is useful if when use se.py and will set the L2 cache |
| size and the clock in /proc/cpuinfo if provided. |
| |
| First, this function walks the system object to find all CPUs. |
| Then, this function creates the following files with the CPU information |
| - /proc/cpuinfo which contains the clock and the L2 size |
| (assumes all L2s private and the same size) |
| - /proc/stat simply lists all CPUs |
| - /sys/devices/system/cpu/online and /sys/devices/system/cpu/possible |
| These files list all of the CPUs in this system. |
| - /tmp |
| |
| These files are created in the `fs` directory in the outdir path. |
| """ |
| fsdir = joinpath(m5.options.outdir, 'fs') |
| replace_tree(fsdir) |
| |
| # Set up /proc |
| procdir = joinpath(fsdir, 'proc') |
| mkdir(procdir) |
| |
| try: |
| cpus = \ |
| [obj for obj in system.descendants() if isinstance(obj, BaseCPU)] |
| except NameError: |
| # BaseCPU is not defined for the NULL ISA |
| cpus = [] |
| |
| cpu_clock = 0 |
| if hasattr(options, 'cpu_clock'): |
| cpu_clock = toFrequency(options.cpu_clock) / mega |
| |
| l2_size = 0 |
| if hasattr(options, 'l2_size'): |
| l2_size = toMemorySize(options.l2_size) / kibi |
| |
| for i,cpu in enumerate(cpus): |
| one_cpu = 'processor : {proc}\n' + \ |
| 'vendor_id : Generic\n' + \ |
| 'cpu family : 0\n' + \ |
| 'model : 0\n' + \ |
| 'model name : Generic\n' + \ |
| 'stepping : 0\n' + \ |
| 'cpu MHz : {clock:0.3f}\n' + \ |
| 'cache size: : {l2_size}K\n' + \ |
| 'physical id : 0\n' + \ |
| 'siblings : {num_cpus}\n' + \ |
| 'core id : {proc}\n' + \ |
| 'cpu cores : {num_cpus}\n' + \ |
| 'fpu : yes\n' + \ |
| 'fpu exception : yes\n' + \ |
| 'cpuid level : 1\n' + \ |
| 'wp : yes\n' + \ |
| 'flags : fpu\n' + \ |
| 'cache alignment : {cacheline_size}\n' + \ |
| '\n' |
| one_cpu = one_cpu.format(proc = i, num_cpus = len(cpus), |
| # Note: it would be nice to use cpu.clock, but it hasn't |
| # been finalized yet since m5.instantiate() isn't done. |
| clock = cpu_clock, |
| # Note: this assumes the L2 is private to each core |
| l2_size = l2_size, |
| cacheline_size=system.cache_line_size.getValue()) |
| file_append((procdir, 'cpuinfo'), one_cpu) |
| |
| file_append((procdir, 'stat'), 'cpu 0 0 0 0 0 0 0\n') |
| for i in range(len(cpus)): |
| file_append((procdir, 'stat'), 'cpu%d 0 0 0 0 0 0 0\n' % i) |
| |
| # Set up /sys |
| sysdir = joinpath(fsdir, 'sys') |
| mkdir(sysdir) |
| |
| # Set up /sys/devices/system/cpu |
| cpudir = joinpath(sysdir, 'devices', 'system', 'cpu') |
| makedirs(cpudir, exist_ok=True) |
| |
| file_append((cpudir, 'online'), '0-%d' % (len(cpus) - 1)) |
| file_append((cpudir, 'possible'), '0-%d' % (len(cpus) - 1)) |
| |
| # Set up /tmp |
| tmpdir = joinpath(fsdir, 'tmp') |
| replace_tree(tmpdir) |
| |
| system.redirect_paths = _redirect_paths(options) |
| |
| # Setting the interpreter path. This is used to load the |
| # guest dynamic linker itself from the elf file. |
| interp = getattr(options, 'interp_dir', None) |
| if interp: |
| from m5.core import setInterpDir |
| setInterpDir(interp) |
| |
| print("Setting the interpreter path to:", interp, |
| "\nFor dynamically linked applications you might still " |
| "need to setup the --redirects so that libraries are " |
| "found\n") |
| |
| def register_node(cpu_list, mem, node_number): |
| nodebasedir = joinpath(m5.options.outdir, 'fs', 'sys', 'devices', |
| 'system', 'node') |
| |
| nodedir = joinpath(nodebasedir,'node%d' % node_number) |
| makedirs(nodedir, exist_ok=True) |
| |
| file_append((nodedir, 'cpumap'), hex_mask(cpu_list)) |
| file_append((nodedir, 'meminfo'), |
| 'Node %d MemTotal: %dkB' % (node_number, |
| toMemorySize(str(mem))/kibi)) |
| |
| def register_cpu(physical_package_id, core_siblings, |
| core_id, thread_siblings): |
| cpudir = joinpath(m5.options.outdir, 'fs', 'sys', 'devices', 'system', |
| 'cpu', 'cpu%d' % core_id) |
| |
| makedirs(joinpath(cpudir, 'topology'), exist_ok=True) |
| makedirs(joinpath(cpudir, 'cache')) |
| |
| file_append((cpudir, 'online'), '1') |
| file_append((cpudir, 'topology', 'physical_package_id'), |
| physical_package_id) |
| file_append((cpudir, 'topology', 'core_siblings'), |
| hex_mask(core_siblings)) |
| file_append((cpudir, 'topology', 'core_id'), core_id) |
| file_append((cpudir, 'topology', 'thread_siblings'), |
| hex_mask(thread_siblings)) |
| |
| def register_cache(level, idu_type, size, line_size, assoc, cpus): |
| fsdir = joinpath(m5.options.outdir, 'fs') |
| for i in cpus: |
| cachedir = joinpath(fsdir, 'sys', 'devices', 'system', 'cpu', |
| 'cpu%d' % i, 'cache') |
| |
| j = 0 |
| while isdir(joinpath(cachedir, 'index%d' % j)): |
| j += 1 |
| indexdir = joinpath(cachedir, 'index%d' % j) |
| makedirs(indexdir, exist_ok=True) |
| |
| file_append((indexdir, 'level'), level) |
| file_append((indexdir, 'type'), idu_type) |
| file_append((indexdir, 'size'), "%dK" % (toMemorySize(size)/kibi)) |
| file_append((indexdir, 'coherency_line_size'), line_size) |
| |
| # Since cache size = number of indices * associativity * block size |
| num_sets = toMemorySize(size) / int(assoc) * int(line_size) |
| |
| file_append((indexdir, 'number_of_sets'), num_sets) |
| file_append((indexdir, 'physical_line_partition'), '1') |
| file_append((indexdir, 'shared_cpu_map'), hex_mask(cpus)) |
| file_append((indexdir, 'shared_cpu_list'), |
| ','.join(str(cpu) for cpu in cpus)) |
| |
| def _redirect_paths(options): |
| # Redirect filesystem syscalls from src to the first matching dests |
| redirect_paths = [RedirectPath(app_path = "/proc", |
| host_paths = ["%s/fs/proc" % m5.options.outdir]), |
| RedirectPath(app_path = "/sys", |
| host_paths = ["%s/fs/sys" % m5.options.outdir]), |
| RedirectPath(app_path = "/tmp", |
| host_paths = ["%s/fs/tmp" % m5.options.outdir])] |
| |
| # Setting the redirect paths so that the guest dynamic linker |
| # can point to the proper /lib collection (e.g. to load libc) |
| redirects = getattr(options, 'redirects', []) |
| for redirect in redirects: |
| app_path, host_path = redirect.split("=") |
| redirect_paths.append( |
| RedirectPath(app_path = app_path, host_paths = [ host_path ])) |
| |
| chroot = getattr(options, 'chroot', None) |
| if chroot: |
| redirect_paths.append( |
| RedirectPath( |
| app_path = "/", |
| host_paths = ["%s" % os.path.expanduser(chroot)])) |
| |
| return redirect_paths |
