| # example test compile and run parameters |
| # Note: the absolute path to the chdir-print binary should be specified |
| # in the run command even if running from the same folder. This is needed |
| # because chdir is executed before triggering a clone for the file read, |
| # and the cloned process won't be able to find the executable if a relative |
| # path is provided. |
| |
| # compile examples |
| scons --default=X86 ./build/X86/gem5.opt PROTOCOL=MOESI_hammer |
| scons --default=X86 ./build/X86/gem5.opt PROTOCOL=MESI_Three_Level |
| |
| # run parameters |
| <GEM5_ROOT>/build/X86/gem5.opt <GEM5_ROOT>/configs/example/se.py -c <GEM5_ROOT>/tests/test-progs/chdir-print/chdir-print -n2 --ruby |
| |
| |
| # example successful output for MESI_Three_Level: |
| |
| <...> |
| |
| **** REAL SIMULATION **** |
| info: Entering event queue @ 0. Starting simulation... |
| warn: Replacement policy updates recently became the responsibility of SLICC state machines. Make sure to setMRU() near callbacks in .sm files! |
| cwd: /proj/research_simu/users/jalsop/gem5-mem_dif_debug/tests/test-progs/chdir-print/ |
| cwd: /proc |
| |
| <...> |
| |
| processor : 0 |
| vendor_id : Generic |
| cpu family : 0 |
| model : 0 |
| model name : Generic |
| stepping : 0 |
| cpu MHz : 2000 |
| cache size: : 2048K |
| physical id : 0 |
| siblings : 2 |
| core id : 0 |
| cpu cores : 2 |
| fpu : yes |
| fpu exception : yes |
| cpuid level : 1 |
| wp : yes |
| flags : fpu |
| cache alignment : 64 |
| |
| processor : 1 |
| vendor_id : Generic |
| cpu family : 0 |
| model : 0 |
| model name : Generic |
| stepping : 0 |
| cpu MHz : 2000 |
| cache size: : 2048K |
| physical id : 0 |
| siblings : 2 |
| core id : 1 |
| cpu cores : 2 |
| fpu : yes |
| fpu exception : yes |
| cpuid level : 1 |
| wp : yes |
| flags : fpu |
| cache alignment : 64 |
| |
| SUCCESS |
| Exiting @ tick 2694923000 because exiting with last active thread context |
