src/cpu/o3/decode_impl.hh - public/gem5 - Git at Google

 /*
  * Copyright (c) 2012, 2014 ARM Limited
  * All rights reserved
  *
  * The license below extends only to copyright in the software and shall
  * not be construed as granting a license to any other intellectual
  * property including but not limited to intellectual property relating
  * to a hardware implementation of the functionality of the software
  * licensed hereunder.  You may use the software subject to the license
  * terms below provided that you ensure that this notice is replicated
  * unmodified and in its entirety in all distributions of the software,
  * modified or unmodified, in source code or in binary form.
  *
  * Copyright (c) 2004-2006 The Regents of The University of Michigan
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are
  * met: redistributions of source code must retain the above copyright
  * notice, this list of conditions and the following disclaimer;
  * redistributions in binary form must reproduce the above copyright
  * notice, this list of conditions and the following disclaimer in the
  * documentation and/or other materials provided with the distribution;
  * neither the name of the copyright holders nor the names of its
  * contributors may be used to endorse or promote products derived from
  * this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 #ifndef __CPU_O3_DECODE_IMPL_HH__
 #define __CPU_O3_DECODE_IMPL_HH__

 #include "arch/types.hh"
 #include "base/trace.hh"
 #include "config/the_isa.hh"
 #include "cpu/o3/decode.hh"
 #include "cpu/inst_seq.hh"
 #include "debug/Activity.hh"
 #include "debug/Decode.hh"
 #include "debug/O3PipeView.hh"
 #include "params/DerivO3CPU.hh"
 #include "sim/full_system.hh"

 // clang complains about std::set being overloaded with Packet::set if
 // we open up the entire namespace std
 using std::list;

 template<class Impl>
 DefaultDecode<Impl>::DefaultDecode(O3CPU *_cpu, DerivO3CPUParams *params)
     : cpu(_cpu),
       renameToDecodeDelay(params->renameToDecodeDelay),
       iewToDecodeDelay(params->iewToDecodeDelay),
       commitToDecodeDelay(params->commitToDecodeDelay),
       fetchToDecodeDelay(params->fetchToDecodeDelay),
       decodeWidth(params->decodeWidth),
       numThreads(params->numThreads),
       stats(_cpu)
 {
     if (decodeWidth > Impl::MaxWidth)
         fatal("decodeWidth (%d) is larger than compiled limit (%d),\n"
              "\tincrease MaxWidth in src/cpu/o3/impl.hh\n",
              decodeWidth, static_cast<int>(Impl::MaxWidth));

     // @todo: Make into a parameter
     skidBufferMax = (fetchToDecodeDelay + 1) *  params->fetchWidth;
     for (int tid = 0; tid < Impl::MaxThreads; tid++) {
         stalls[tid] = {false};
         decodeStatus[tid] = Idle;
         bdelayDoneSeqNum[tid] = 0;
         squashInst[tid] = nullptr;
         squashAfterDelaySlot[tid] = 0;
     }
 }

 template<class Impl>
 void
 DefaultDecode<Impl>::startupStage()
 {
     resetStage();
 }

 template<class Impl>
 void
 DefaultDecode<Impl>::clearStates(ThreadID tid)
 {
     decodeStatus[tid] = Idle;
     stalls[tid].rename = false;
 }

 template<class Impl>
 void
 DefaultDecode<Impl>::resetStage()
 {
     _status = Inactive;

     // Setup status, make sure stall signals are clear.
     for (ThreadID tid = 0; tid < numThreads; ++tid) {
         decodeStatus[tid] = Idle;

         stalls[tid].rename = false;
     }
 }

 template <class Impl>
 std::string
 DefaultDecode<Impl>::name() const
 {
     return cpu->name() + ".decode";
 }

 template <class Impl>
 DefaultDecode<Impl>::DecodeStats::DecodeStats(O3CPU *cpu)
     : Stats::Group(cpu, "decode"),
       ADD_STAT(idleCycles, "Number of cycles decode is idle"),
       ADD_STAT(blockedCycles, "Number of cycles decode is blocked"),
       ADD_STAT(runCycles, "Number of cycles decode is running"),
       ADD_STAT(unblockCycles, "Number of cycles decode is unblocking"),
       ADD_STAT(squashCycles, "Number of cycles decode is squashing"),
       ADD_STAT(branchResolved, "Number of times decode resolved a "
           " branch"),
       ADD_STAT(branchMispred, "Number of times decode detected a branch"
           " misprediction"),
       ADD_STAT(controlMispred,"Number of times decode detected an"
           " instruction incorrectly predicted as a control"),
       ADD_STAT(decodedInsts, "Number of instructions handled by decode"),
       ADD_STAT(squashedInsts, "Number of squashed instructions handled"
           " by decode")
 {
     idleCycles.prereq(idleCycles);
     blockedCycles.prereq(blockedCycles);
     runCycles.prereq(runCycles);
     unblockCycles.prereq(unblockCycles);
     squashCycles.prereq(squashCycles);
     branchResolved.prereq(branchResolved);
     branchMispred.prereq(branchMispred);
     controlMispred.prereq(controlMispred);
     decodedInsts.prereq(decodedInsts);
     squashedInsts.prereq(squashedInsts);
 }

 template<class Impl>
 void
 DefaultDecode<Impl>::setTimeBuffer(TimeBuffer<TimeStruct> *tb_ptr)
 {
     timeBuffer = tb_ptr;

     // Setup wire to write information back to fetch.
     toFetch = timeBuffer->getWire(0);

     // Create wires to get information from proper places in time buffer.
     fromRename = timeBuffer->getWire(-renameToDecodeDelay);
     fromIEW = timeBuffer->getWire(-iewToDecodeDelay);
     fromCommit = timeBuffer->getWire(-commitToDecodeDelay);
 }

 template<class Impl>
 void
 DefaultDecode<Impl>::setDecodeQueue(TimeBuffer<DecodeStruct> *dq_ptr)
 {
     decodeQueue = dq_ptr;

     // Setup wire to write information to proper place in decode queue.
     toRename = decodeQueue->getWire(0);
 }

 template<class Impl>
 void
 DefaultDecode<Impl>::setFetchQueue(TimeBuffer<FetchStruct> *fq_ptr)
 {
     fetchQueue = fq_ptr;

     // Setup wire to read information from fetch queue.
     fromFetch = fetchQueue->getWire(-fetchToDecodeDelay);
 }

 template<class Impl>
 void
 DefaultDecode<Impl>::setActiveThreads(std::list<ThreadID> *at_ptr)
 {
     activeThreads = at_ptr;
 }

 template <class Impl>
 void
 DefaultDecode<Impl>::drainSanityCheck() const
 {
     for (ThreadID tid = 0; tid < numThreads; ++tid) {
         assert(insts[tid].empty());
         assert(skidBuffer[tid].empty());
     }
 }

 template <class Impl>
 bool
 DefaultDecode<Impl>::isDrained() const
 {
     for (ThreadID tid = 0; tid < numThreads; ++tid) {
         if (!insts[tid].empty() || !skidBuffer[tid].empty() ||
                 (decodeStatus[tid] != Running && decodeStatus[tid] != Idle))
             return false;
     }
     return true;
 }

 template<class Impl>
 bool
 DefaultDecode<Impl>::checkStall(ThreadID tid) const
 {
     bool ret_val = false;

     if (stalls[tid].rename) {
         DPRINTF(Decode,"[tid:%i] Stall fom Rename stage detected.\n", tid);
         ret_val = true;
     }

     return ret_val;
 }

 template<class Impl>
 inline bool
 DefaultDecode<Impl>::fetchInstsValid()
 {
     return fromFetch->size > 0;
 }

 template<class Impl>
 bool
 DefaultDecode<Impl>::block(ThreadID tid)
 {
     DPRINTF(Decode, "[tid:%i] Blocking.\n", tid);

     // Add the current inputs to the skid buffer so they can be
     // reprocessed when this stage unblocks.
     skidInsert(tid);

     // If the decode status is blocked or unblocking then decode has not yet
     // signalled fetch to unblock. In that case, there is no need to tell
     // fetch to block.
     if (decodeStatus[tid] != Blocked) {
         // Set the status to Blocked.
         decodeStatus[tid] = Blocked;

         if (toFetch->decodeUnblock[tid]) {
             toFetch->decodeUnblock[tid] = false;
         } else {
             toFetch->decodeBlock[tid] = true;
             wroteToTimeBuffer = true;
         }

         return true;
     }

     return false;
 }

 template<class Impl>
 bool
 DefaultDecode<Impl>::unblock(ThreadID tid)
 {
     // Decode is done unblocking only if the skid buffer is empty.
     if (skidBuffer[tid].empty()) {
         DPRINTF(Decode, "[tid:%i] Done unblocking.\n", tid);
         toFetch->decodeUnblock[tid] = true;
         wroteToTimeBuffer = true;

         decodeStatus[tid] = Running;
         return true;
     }

     DPRINTF(Decode, "[tid:%i] Currently unblocking.\n", tid);

     return false;
 }

 template<class Impl>
 void
 DefaultDecode<Impl>::squash(const DynInstPtr &inst, ThreadID tid)
 {
     DPRINTF(Decode, "[tid:%i] [sn:%llu] Squashing due to incorrect branch "
             "prediction detected at decode.\n", tid, inst->seqNum);

     // Send back mispredict information.
     toFetch->decodeInfo[tid].branchMispredict = true;
     toFetch->decodeInfo[tid].predIncorrect = true;
     toFetch->decodeInfo[tid].mispredictInst = inst;
     toFetch->decodeInfo[tid].squash = true;
     toFetch->decodeInfo[tid].doneSeqNum = inst->seqNum;
     toFetch->decodeInfo[tid].nextPC = inst->branchTarget();
     toFetch->decodeInfo[tid].branchTaken = inst->pcState().branching();
     toFetch->decodeInfo[tid].squashInst = inst;
     if (toFetch->decodeInfo[tid].mispredictInst->isUncondCtrl()) {
             toFetch->decodeInfo[tid].branchTaken = true;
     }

     InstSeqNum squash_seq_num = inst->seqNum;

     // Might have to tell fetch to unblock.
     if (decodeStatus[tid] == Blocked ||
         decodeStatus[tid] == Unblocking) {
         toFetch->decodeUnblock[tid] = 1;
     }

     // Set status to squashing.
     decodeStatus[tid] = Squashing;

     for (int i=0; i<fromFetch->size; i++) {
         if (fromFetch->insts[i]->threadNumber == tid &&
             fromFetch->insts[i]->seqNum > squash_seq_num) {
             fromFetch->insts[i]->setSquashed();
         }
     }

     // Clear the instruction list and skid buffer in case they have any
     // insts in them.
     while (!insts[tid].empty()) {
         insts[tid].pop();
     }

     while (!skidBuffer[tid].empty()) {
         skidBuffer[tid].pop();
     }

     // Squash instructions up until this one
     cpu->removeInstsUntil(squash_seq_num, tid);
 }

 template<class Impl>
 unsigned
 DefaultDecode<Impl>::squash(ThreadID tid)
 {
     DPRINTF(Decode, "[tid:%i] Squashing.\n",tid);

     if (decodeStatus[tid] == Blocked ||
         decodeStatus[tid] == Unblocking) {
         if (FullSystem) {
             toFetch->decodeUnblock[tid] = 1;
         } else {
             // In syscall emulation, we can have both a block and a squash due
             // to a syscall in the same cycle.  This would cause both signals
             // to be high.  This shouldn't happen in full system.
             // @todo: Determine if this still happens.
             if (toFetch->decodeBlock[tid])
                 toFetch->decodeBlock[tid] = 0;
             else
                 toFetch->decodeUnblock[tid] = 1;
         }
     }

     // Set status to squashing.
     decodeStatus[tid] = Squashing;

     // Go through incoming instructions from fetch and squash them.
     unsigned squash_count = 0;

     for (int i=0; i<fromFetch->size; i++) {
         if (fromFetch->insts[i]->threadNumber == tid) {
             fromFetch->insts[i]->setSquashed();
             squash_count++;
         }
     }

     // Clear the instruction list and skid buffer in case they have any
     // insts in them.
     while (!insts[tid].empty()) {
         insts[tid].pop();
     }

     while (!skidBuffer[tid].empty()) {
         skidBuffer[tid].pop();
     }

     return squash_count;
 }

 template<class Impl>
 void
 DefaultDecode<Impl>::skidInsert(ThreadID tid)
 {
     DynInstPtr inst = NULL;

     while (!insts[tid].empty()) {
         inst = insts[tid].front();

         insts[tid].pop();

         assert(tid == inst->threadNumber);

         skidBuffer[tid].push(inst);

         DPRINTF(Decode,"Inserting [tid:%d][sn:%lli] PC: %s into decode skidBuffer %i\n",
                 inst->threadNumber, inst->seqNum, inst->pcState(), skidBuffer[tid].size());
     }

     // @todo: Eventually need to enforce this by not letting a thread
     // fetch past its skidbuffer
     assert(skidBuffer[tid].size() <= skidBufferMax);
 }

 template<class Impl>
 bool
 DefaultDecode<Impl>::skidsEmpty()
 {
     list<ThreadID>::iterator threads = activeThreads->begin();
     list<ThreadID>::iterator end = activeThreads->end();

     while (threads != end) {
         ThreadID tid = *threads++;
         if (!skidBuffer[tid].empty())
             return false;
     }

     return true;
 }

 template<class Impl>
 void
 DefaultDecode<Impl>::updateStatus()
 {
     bool any_unblocking = false;

     list<ThreadID>::iterator threads = activeThreads->begin();
     list<ThreadID>::iterator end = activeThreads->end();

     while (threads != end) {
         ThreadID tid = *threads++;

         if (decodeStatus[tid] == Unblocking) {
             any_unblocking = true;
             break;
         }
     }

     // Decode will have activity if it's unblocking.
     if (any_unblocking) {
         if (_status == Inactive) {
             _status = Active;

             DPRINTF(Activity, "Activating stage.\n");

             cpu->activateStage(O3CPU::DecodeIdx);
         }
     } else {
         // If it's not unblocking, then decode will not have any internal
         // activity.  Switch it to inactive.
         if (_status == Active) {
             _status = Inactive;
             DPRINTF(Activity, "Deactivating stage.\n");

             cpu->deactivateStage(O3CPU::DecodeIdx);
         }
     }
 }

 template <class Impl>
 void
 DefaultDecode<Impl>::sortInsts()
 {
     int insts_from_fetch = fromFetch->size;
     for (int i = 0; i < insts_from_fetch; ++i) {
         insts[fromFetch->insts[i]->threadNumber].push(fromFetch->insts[i]);
     }
 }

 template<class Impl>
 void
 DefaultDecode<Impl>::readStallSignals(ThreadID tid)
 {
     if (fromRename->renameBlock[tid]) {
         stalls[tid].rename = true;
     }

     if (fromRename->renameUnblock[tid]) {
         assert(stalls[tid].rename);
         stalls[tid].rename = false;
     }
 }

 template <class Impl>
 bool
 DefaultDecode<Impl>::checkSignalsAndUpdate(ThreadID tid)
 {
     // Check if there's a squash signal, squash if there is.
     // Check stall signals, block if necessary.
     // If status was blocked
     //     Check if stall conditions have passed
     //         if so then go to unblocking
     // If status was Squashing
     //     check if squashing is not high.  Switch to running this cycle.

     // Update the per thread stall statuses.
     readStallSignals(tid);

     // Check squash signals from commit.
     if (fromCommit->commitInfo[tid].squash) {

         DPRINTF(Decode, "[tid:%i] Squashing instructions due to squash "
                 "from commit.\n", tid);

         squash(tid);

         return true;
     }

     if (checkStall(tid)) {
         return block(tid);
     }

     if (decodeStatus[tid] == Blocked) {
         DPRINTF(Decode, "[tid:%i] Done blocking, switching to unblocking.\n",
                 tid);

         decodeStatus[tid] = Unblocking;

         unblock(tid);

         return true;
     }

     if (decodeStatus[tid] == Squashing) {
         // Switch status to running if decode isn't being told to block or
         // squash this cycle.
         DPRINTF(Decode, "[tid:%i] Done squashing, switching to running.\n",
                 tid);

         decodeStatus[tid] = Running;

         return false;
     }

     // If we've reached this point, we have not gotten any signals that
     // cause decode to change its status.  Decode remains the same as before.
     return false;
 }

 template<class Impl>
 void
 DefaultDecode<Impl>::tick()
 {
     wroteToTimeBuffer = false;

     bool status_change = false;

     toRenameIndex = 0;

     list<ThreadID>::iterator threads = activeThreads->begin();
     list<ThreadID>::iterator end = activeThreads->end();

     sortInsts();

     //Check stall and squash signals.
     while (threads != end) {
         ThreadID tid = *threads++;

         DPRINTF(Decode,"Processing [tid:%i]\n",tid);
         status_change =  checkSignalsAndUpdate(tid) || status_change;

         decode(status_change, tid);
     }

     if (status_change) {
         updateStatus();
     }

     if (wroteToTimeBuffer) {
         DPRINTF(Activity, "Activity this cycle.\n");

         cpu->activityThisCycle();
     }
 }

 template<class Impl>
 void
 DefaultDecode<Impl>::decode(bool &status_change, ThreadID tid)
 {
     // If status is Running or idle,
     //     call decodeInsts()
     // If status is Unblocking,
     //     buffer any instructions coming from fetch
     //     continue trying to empty skid buffer
     //     check if stall conditions have passed

     if (decodeStatus[tid] == Blocked) {
         ++stats.blockedCycles;
     } else if (decodeStatus[tid] == Squashing) {
         ++stats.squashCycles;
     }

     // Decode should try to decode as many instructions as its bandwidth
     // will allow, as long as it is not currently blocked.
     if (decodeStatus[tid] == Running ||
         decodeStatus[tid] == Idle) {
         DPRINTF(Decode, "[tid:%i] Not blocked, so attempting to run "
                 "stage.\n",tid);

         decodeInsts(tid);
     } else if (decodeStatus[tid] == Unblocking) {
         // Make sure that the skid buffer has something in it if the
         // status is unblocking.
         assert(!skidsEmpty());

         // If the status was unblocking, then instructions from the skid
         // buffer were used.  Remove those instructions and handle
         // the rest of unblocking.
         decodeInsts(tid);

         if (fetchInstsValid()) {
             // Add the current inputs to the skid buffer so they can be
             // reprocessed when this stage unblocks.
             skidInsert(tid);
         }

         status_change = unblock(tid) || status_change;
     }
 }

 template <class Impl>
 void
 DefaultDecode<Impl>::decodeInsts(ThreadID tid)
 {
     // Instructions can come either from the skid buffer or the list of
     // instructions coming from fetch, depending on decode's status.
     int insts_available = decodeStatus[tid] == Unblocking ?
         skidBuffer[tid].size() : insts[tid].size();

     if (insts_available == 0) {
         DPRINTF(Decode, "[tid:%i] Nothing to do, breaking out"
                 " early.\n",tid);
         // Should I change the status to idle?
         ++stats.idleCycles;
         return;
     } else if (decodeStatus[tid] == Unblocking) {
         DPRINTF(Decode, "[tid:%i] Unblocking, removing insts from skid "
                 "buffer.\n",tid);
         ++stats.unblockCycles;
     } else if (decodeStatus[tid] == Running) {
         ++stats.runCycles;
     }

     std::queue<DynInstPtr>
         &insts_to_decode = decodeStatus[tid] == Unblocking ?
         skidBuffer[tid] : insts[tid];

     DPRINTF(Decode, "[tid:%i] Sending instruction to rename.\n",tid);

     while (insts_available > 0 && toRenameIndex < decodeWidth) {
         assert(!insts_to_decode.empty());

         DynInstPtr inst = std::move(insts_to_decode.front());

         insts_to_decode.pop();

         DPRINTF(Decode, "[tid:%i] Processing instruction [sn:%lli] with "
                 "PC %s\n", tid, inst->seqNum, inst->pcState());

         if (inst->isSquashed()) {
             DPRINTF(Decode, "[tid:%i] Instruction %i with PC %s is "
                     "squashed, skipping.\n",
                     tid, inst->seqNum, inst->pcState());

             ++stats.squashedInsts;

             --insts_available;

             continue;
         }

         // Also check if instructions have no source registers.  Mark
         // them as ready to issue at any time.  Not sure if this check
         // should exist here or at a later stage; however it doesn't matter
         // too much for function correctness.
         if (inst->numSrcRegs() == 0) {
             inst->setCanIssue();
         }

         // This current instruction is valid, so add it into the decode
         // queue.  The next instruction may not be valid, so check to
         // see if branches were predicted correctly.
         toRename->insts[toRenameIndex] = inst;

         ++(toRename->size);
         ++toRenameIndex;
         ++stats.decodedInsts;
         --insts_available;

 #if TRACING_ON
         if (DTRACE(O3PipeView)) {
             inst->decodeTick = curTick() - inst->fetchTick;
         }
 #endif

         // Ensure that if it was predicted as a branch, it really is a
         // branch.
         if (inst->readPredTaken() && !inst->isControl()) {
             panic("Instruction predicted as a branch!");

             ++stats.controlMispred;

             // Might want to set some sort of boolean and just do
             // a check at the end
             squash(inst, inst->threadNumber);

             break;
         }

         // Go ahead and compute any PC-relative branches.
         // This includes direct unconditional control and
         // direct conditional control that is predicted taken.
         if (inst->isDirectCtrl() &&
            (inst->isUncondCtrl() || inst->readPredTaken()))
         {
             ++stats.branchResolved;

             if (!(inst->branchTarget() == inst->readPredTarg())) {
                 ++stats.branchMispred;

                 // Might want to set some sort of boolean and just do
                 // a check at the end
                 squash(inst, inst->threadNumber);
                 TheISA::PCState target = inst->branchTarget();

                 DPRINTF(Decode,
                         "[tid:%i] [sn:%llu] "
                         "Updating predictions: Wrong predicted target: %s \
                         PredPC: %s\n",
                         tid, inst->seqNum, inst->readPredTarg(), target);
                 //The micro pc after an instruction level branch should be 0
                 inst->setPredTarg(target);
                 break;
             }
         }
     }

     // If we didn't process all instructions, then we will need to block
     // and put all those instructions into the skid buffer.
     if (!insts_to_decode.empty()) {
         block(tid);
     }

     // Record that decode has written to the time buffer for activity
     // tracking.
     if (toRenameIndex) {
         wroteToTimeBuffer = true;
     }
 }

 #endif//__CPU_O3_DECODE_IMPL_HH__
	/*
	* Copyright (c) 2012, 2014 ARM Limited
	* All rights reserved
	*
	* The license below extends only to copyright in the software and shall
	* not be construed as granting a license to any other intellectual
	* property including but not limited to intellectual property relating
	* to a hardware implementation of the functionality of the software
	* licensed hereunder. You may use the software subject to the license
	* terms below provided that you ensure that this notice is replicated
	* unmodified and in its entirety in all distributions of the software,
	* modified or unmodified, in source code or in binary form.
	*
	* Copyright (c) 2004-2006 The Regents of The University of Michigan
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are
	* met: redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer;
	* redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution;
	* neither the name of the copyright holders nor the names of its
	* contributors may be used to endorse or promote products derived from
	* this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	#ifndef __CPU_O3_DECODE_IMPL_HH__
	#define __CPU_O3_DECODE_IMPL_HH__

	#include "arch/types.hh"
	#include "base/trace.hh"
	#include "config/the_isa.hh"
	#include "cpu/o3/decode.hh"
	#include "cpu/inst_seq.hh"
	#include "debug/Activity.hh"
	#include "debug/Decode.hh"
	#include "debug/O3PipeView.hh"
	#include "params/DerivO3CPU.hh"
	#include "sim/full_system.hh"

	// clang complains about std::set being overloaded with Packet::set if
	// we open up the entire namespace std
	using std::list;

	template<class Impl>
	DefaultDecode<Impl>::DefaultDecode(O3CPU _cpu, DerivO3CPUParams params)
	: cpu(_cpu),
	renameToDecodeDelay(params->renameToDecodeDelay),
	iewToDecodeDelay(params->iewToDecodeDelay),
	commitToDecodeDelay(params->commitToDecodeDelay),
	fetchToDecodeDelay(params->fetchToDecodeDelay),
	decodeWidth(params->decodeWidth),
	numThreads(params->numThreads),
	stats(_cpu)
	{
	if (decodeWidth > Impl::MaxWidth)
	fatal("decodeWidth (%d) is larger than compiled limit (%d),\n"
	"\tincrease MaxWidth in src/cpu/o3/impl.hh\n",
	decodeWidth, static_cast<int>(Impl::MaxWidth));

	// @todo: Make into a parameter
	skidBufferMax = (fetchToDecodeDelay + 1) * params->fetchWidth;
	for (int tid = 0; tid < Impl::MaxThreads; tid++) {
	stalls[tid] = {false};
	decodeStatus[tid] = Idle;
	bdelayDoneSeqNum[tid] = 0;
	squashInst[tid] = nullptr;
	squashAfterDelaySlot[tid] = 0;
	}
	}

	template<class Impl>
	void
	DefaultDecode<Impl>::startupStage()
	{
	resetStage();
	}

	template<class Impl>
	void
	DefaultDecode<Impl>::clearStates(ThreadID tid)
	{
	decodeStatus[tid] = Idle;
	stalls[tid].rename = false;
	}

	template<class Impl>
	void
	DefaultDecode<Impl>::resetStage()
	{
	_status = Inactive;

	// Setup status, make sure stall signals are clear.
	for (ThreadID tid = 0; tid < numThreads; ++tid) {
	decodeStatus[tid] = Idle;

	stalls[tid].rename = false;
	}
	}

	template <class Impl>
	std::string
	DefaultDecode<Impl>::name() const
	{
	return cpu->name() + ".decode";
	}

	template <class Impl>
	DefaultDecode<Impl>::DecodeStats::DecodeStats(O3CPU *cpu)
	: Stats::Group(cpu, "decode"),
	ADD_STAT(idleCycles, "Number of cycles decode is idle"),
	ADD_STAT(blockedCycles, "Number of cycles decode is blocked"),
	ADD_STAT(runCycles, "Number of cycles decode is running"),
	ADD_STAT(unblockCycles, "Number of cycles decode is unblocking"),
	ADD_STAT(squashCycles, "Number of cycles decode is squashing"),
	ADD_STAT(branchResolved, "Number of times decode resolved a "
	" branch"),
	ADD_STAT(branchMispred, "Number of times decode detected a branch"
	" misprediction"),
	ADD_STAT(controlMispred,"Number of times decode detected an"
	" instruction incorrectly predicted as a control"),
	ADD_STAT(decodedInsts, "Number of instructions handled by decode"),
	ADD_STAT(squashedInsts, "Number of squashed instructions handled"
	" by decode")
	{
	idleCycles.prereq(idleCycles);
	blockedCycles.prereq(blockedCycles);
	runCycles.prereq(runCycles);
	unblockCycles.prereq(unblockCycles);
	squashCycles.prereq(squashCycles);
	branchResolved.prereq(branchResolved);
	branchMispred.prereq(branchMispred);
	controlMispred.prereq(controlMispred);
	decodedInsts.prereq(decodedInsts);
	squashedInsts.prereq(squashedInsts);
	}

	template<class Impl>
	void
	DefaultDecode<Impl>::setTimeBuffer(TimeBuffer<TimeStruct> *tb_ptr)
	{
	timeBuffer = tb_ptr;

	// Setup wire to write information back to fetch.
	toFetch = timeBuffer->getWire(0);

	// Create wires to get information from proper places in time buffer.
	fromRename = timeBuffer->getWire(-renameToDecodeDelay);
	fromIEW = timeBuffer->getWire(-iewToDecodeDelay);
	fromCommit = timeBuffer->getWire(-commitToDecodeDelay);
	}

	template<class Impl>
	void
	DefaultDecode<Impl>::setDecodeQueue(TimeBuffer<DecodeStruct> *dq_ptr)
	{
	decodeQueue = dq_ptr;

	// Setup wire to write information to proper place in decode queue.
	toRename = decodeQueue->getWire(0);
	}

	template<class Impl>
	void
	DefaultDecode<Impl>::setFetchQueue(TimeBuffer<FetchStruct> *fq_ptr)
	{
	fetchQueue = fq_ptr;

	// Setup wire to read information from fetch queue.
	fromFetch = fetchQueue->getWire(-fetchToDecodeDelay);
	}

	template<class Impl>
	void
	DefaultDecode<Impl>::setActiveThreads(std::list<ThreadID> *at_ptr)
	{
	activeThreads = at_ptr;
	}

	template <class Impl>
	void
	DefaultDecode<Impl>::drainSanityCheck() const
	{
	for (ThreadID tid = 0; tid < numThreads; ++tid) {
	assert(insts[tid].empty());
	assert(skidBuffer[tid].empty());
	}
	}

	template <class Impl>
	bool
	DefaultDecode<Impl>::isDrained() const
	{
	for (ThreadID tid = 0; tid < numThreads; ++tid) {
	if (!insts[tid].empty() \|\| !skidBuffer[tid].empty() \|\|
	(decodeStatus[tid] != Running && decodeStatus[tid] != Idle))
	return false;
	}
	return true;
	}

	template<class Impl>
	bool
	DefaultDecode<Impl>::checkStall(ThreadID tid) const
	{
	bool ret_val = false;

	if (stalls[tid].rename) {
	DPRINTF(Decode,"[tid:%i] Stall fom Rename stage detected.\n", tid);
	ret_val = true;
	}

	return ret_val;
	}

	template<class Impl>
	inline bool
	DefaultDecode<Impl>::fetchInstsValid()
	{
	return fromFetch->size > 0;
	}

	template<class Impl>
	bool
	DefaultDecode<Impl>::block(ThreadID tid)
	{
	DPRINTF(Decode, "[tid:%i] Blocking.\n", tid);

	// Add the current inputs to the skid buffer so they can be
	// reprocessed when this stage unblocks.
	skidInsert(tid);

	// If the decode status is blocked or unblocking then decode has not yet
	// signalled fetch to unblock. In that case, there is no need to tell
	// fetch to block.
	if (decodeStatus[tid] != Blocked) {
	// Set the status to Blocked.
	decodeStatus[tid] = Blocked;

	if (toFetch->decodeUnblock[tid]) {
	toFetch->decodeUnblock[tid] = false;
	} else {
	toFetch->decodeBlock[tid] = true;
	wroteToTimeBuffer = true;
	}

	return true;
	}

	return false;
	}

	template<class Impl>
	bool
	DefaultDecode<Impl>::unblock(ThreadID tid)
	{
	// Decode is done unblocking only if the skid buffer is empty.
	if (skidBuffer[tid].empty()) {
	DPRINTF(Decode, "[tid:%i] Done unblocking.\n", tid);
	toFetch->decodeUnblock[tid] = true;
	wroteToTimeBuffer = true;

	decodeStatus[tid] = Running;
	return true;
	}

	DPRINTF(Decode, "[tid:%i] Currently unblocking.\n", tid);

	return false;
	}

	template<class Impl>
	void
	DefaultDecode<Impl>::squash(const DynInstPtr &inst, ThreadID tid)
	{
	DPRINTF(Decode, "[tid:%i] [sn:%llu] Squashing due to incorrect branch "
	"prediction detected at decode.\n", tid, inst->seqNum);

	// Send back mispredict information.
	toFetch->decodeInfo[tid].branchMispredict = true;
	toFetch->decodeInfo[tid].predIncorrect = true;
	toFetch->decodeInfo[tid].mispredictInst = inst;
	toFetch->decodeInfo[tid].squash = true;
	toFetch->decodeInfo[tid].doneSeqNum = inst->seqNum;
	toFetch->decodeInfo[tid].nextPC = inst->branchTarget();
	toFetch->decodeInfo[tid].branchTaken = inst->pcState().branching();
	toFetch->decodeInfo[tid].squashInst = inst;
	if (toFetch->decodeInfo[tid].mispredictInst->isUncondCtrl()) {
	toFetch->decodeInfo[tid].branchTaken = true;
	}

	InstSeqNum squash_seq_num = inst->seqNum;

	// Might have to tell fetch to unblock.
	if (decodeStatus[tid] == Blocked \|\|
	decodeStatus[tid] == Unblocking) {
	toFetch->decodeUnblock[tid] = 1;
	}

	// Set status to squashing.
	decodeStatus[tid] = Squashing;

	for (int i=0; i<fromFetch->size; i++) {
	if (fromFetch->insts[i]->threadNumber == tid &&
	fromFetch->insts[i]->seqNum > squash_seq_num) {
	fromFetch->insts[i]->setSquashed();
	}
	}

	// Clear the instruction list and skid buffer in case they have any
	// insts in them.
	while (!insts[tid].empty()) {
	insts[tid].pop();
	}

	while (!skidBuffer[tid].empty()) {
	skidBuffer[tid].pop();
	}

	// Squash instructions up until this one
	cpu->removeInstsUntil(squash_seq_num, tid);
	}

	template<class Impl>
	unsigned
	DefaultDecode<Impl>::squash(ThreadID tid)
	{
	DPRINTF(Decode, "[tid:%i] Squashing.\n",tid);

	if (decodeStatus[tid] == Blocked \|\|
	decodeStatus[tid] == Unblocking) {
	if (FullSystem) {
	toFetch->decodeUnblock[tid] = 1;
	} else {
	// In syscall emulation, we can have both a block and a squash due
	// to a syscall in the same cycle. This would cause both signals
	// to be high. This shouldn't happen in full system.
	// @todo: Determine if this still happens.
	if (toFetch->decodeBlock[tid])
	toFetch->decodeBlock[tid] = 0;
	else
	toFetch->decodeUnblock[tid] = 1;
	}
	}

	// Set status to squashing.
	decodeStatus[tid] = Squashing;

	// Go through incoming instructions from fetch and squash them.
	unsigned squash_count = 0;

	for (int i=0; i<fromFetch->size; i++) {
	if (fromFetch->insts[i]->threadNumber == tid) {
	fromFetch->insts[i]->setSquashed();
	squash_count++;
	}
	}

	// Clear the instruction list and skid buffer in case they have any
	// insts in them.
	while (!insts[tid].empty()) {
	insts[tid].pop();
	}

	while (!skidBuffer[tid].empty()) {
	skidBuffer[tid].pop();
	}

	return squash_count;
	}

	template<class Impl>
	void
	DefaultDecode<Impl>::skidInsert(ThreadID tid)
	{
	DynInstPtr inst = NULL;

	while (!insts[tid].empty()) {
	inst = insts[tid].front();

	insts[tid].pop();

	assert(tid == inst->threadNumber);

	skidBuffer[tid].push(inst);

	DPRINTF(Decode,"Inserting [tid:%d][sn:%lli] PC: %s into decode skidBuffer %i\n",
	inst->threadNumber, inst->seqNum, inst->pcState(), skidBuffer[tid].size());
	}

	// @todo: Eventually need to enforce this by not letting a thread
	// fetch past its skidbuffer
	assert(skidBuffer[tid].size() <= skidBufferMax);
	}

	template<class Impl>
	bool
	DefaultDecode<Impl>::skidsEmpty()
	{
	list<ThreadID>::iterator threads = activeThreads->begin();
	list<ThreadID>::iterator end = activeThreads->end();

	while (threads != end) {
	ThreadID tid = *threads++;
	if (!skidBuffer[tid].empty())
	return false;
	}

	return true;
	}

	template<class Impl>
	void
	DefaultDecode<Impl>::updateStatus()
	{
	bool any_unblocking = false;

	list<ThreadID>::iterator threads = activeThreads->begin();
	list<ThreadID>::iterator end = activeThreads->end();

	while (threads != end) {
	ThreadID tid = *threads++;

	if (decodeStatus[tid] == Unblocking) {
	any_unblocking = true;
	break;
	}
	}

	// Decode will have activity if it's unblocking.
	if (any_unblocking) {
	if (_status == Inactive) {
	_status = Active;

	DPRINTF(Activity, "Activating stage.\n");

	cpu->activateStage(O3CPU::DecodeIdx);
	}
	} else {
	// If it's not unblocking, then decode will not have any internal
	// activity. Switch it to inactive.
	if (_status == Active) {
	_status = Inactive;
	DPRINTF(Activity, "Deactivating stage.\n");

	cpu->deactivateStage(O3CPU::DecodeIdx);
	}
	}
	}

	template <class Impl>
	void
	DefaultDecode<Impl>::sortInsts()
	{
	int insts_from_fetch = fromFetch->size;
	for (int i = 0; i < insts_from_fetch; ++i) {
	insts[fromFetch->insts[i]->threadNumber].push(fromFetch->insts[i]);
	}
	}

	template<class Impl>
	void
	DefaultDecode<Impl>::readStallSignals(ThreadID tid)
	{
	if (fromRename->renameBlock[tid]) {
	stalls[tid].rename = true;
	}

	if (fromRename->renameUnblock[tid]) {
	assert(stalls[tid].rename);
	stalls[tid].rename = false;
	}
	}

	template <class Impl>
	bool
	DefaultDecode<Impl>::checkSignalsAndUpdate(ThreadID tid)
	{
	// Check if there's a squash signal, squash if there is.
	// Check stall signals, block if necessary.
	// If status was blocked
	// Check if stall conditions have passed
	// if so then go to unblocking
	// If status was Squashing
	// check if squashing is not high. Switch to running this cycle.

	// Update the per thread stall statuses.
	readStallSignals(tid);

	// Check squash signals from commit.
	if (fromCommit->commitInfo[tid].squash) {

	DPRINTF(Decode, "[tid:%i] Squashing instructions due to squash "
	"from commit.\n", tid);

	squash(tid);

	return true;
	}

	if (checkStall(tid)) {
	return block(tid);
	}

	if (decodeStatus[tid] == Blocked) {
	DPRINTF(Decode, "[tid:%i] Done blocking, switching to unblocking.\n",
	tid);

	decodeStatus[tid] = Unblocking;

	unblock(tid);

	return true;
	}

	if (decodeStatus[tid] == Squashing) {
	// Switch status to running if decode isn't being told to block or
	// squash this cycle.
	DPRINTF(Decode, "[tid:%i] Done squashing, switching to running.\n",
	tid);

	decodeStatus[tid] = Running;

	return false;
	}

	// If we've reached this point, we have not gotten any signals that
	// cause decode to change its status. Decode remains the same as before.
	return false;
	}

	template<class Impl>
	void
	DefaultDecode<Impl>::tick()
	{
	wroteToTimeBuffer = false;

	bool status_change = false;

	toRenameIndex = 0;

	list<ThreadID>::iterator threads = activeThreads->begin();
	list<ThreadID>::iterator end = activeThreads->end();

	sortInsts();

	//Check stall and squash signals.
	while (threads != end) {
	ThreadID tid = *threads++;

	DPRINTF(Decode,"Processing [tid:%i]\n",tid);
	status_change = checkSignalsAndUpdate(tid) \|\| status_change;

	decode(status_change, tid);
	}

	if (status_change) {
	updateStatus();
	}

	if (wroteToTimeBuffer) {
	DPRINTF(Activity, "Activity this cycle.\n");

	cpu->activityThisCycle();
	}
	}

	template<class Impl>
	void
	DefaultDecode<Impl>::decode(bool &status_change, ThreadID tid)
	{
	// If status is Running or idle,
	// call decodeInsts()
	// If status is Unblocking,
	// buffer any instructions coming from fetch
	// continue trying to empty skid buffer
	// check if stall conditions have passed

	if (decodeStatus[tid] == Blocked) {
	++stats.blockedCycles;
	} else if (decodeStatus[tid] == Squashing) {
	++stats.squashCycles;
	}

	// Decode should try to decode as many instructions as its bandwidth
	// will allow, as long as it is not currently blocked.
	if (decodeStatus[tid] == Running \|\|
	decodeStatus[tid] == Idle) {
	DPRINTF(Decode, "[tid:%i] Not blocked, so attempting to run "
	"stage.\n",tid);

	decodeInsts(tid);
	} else if (decodeStatus[tid] == Unblocking) {
	// Make sure that the skid buffer has something in it if the
	// status is unblocking.
	assert(!skidsEmpty());

	// If the status was unblocking, then instructions from the skid
	// buffer were used. Remove those instructions and handle
	// the rest of unblocking.
	decodeInsts(tid);

	if (fetchInstsValid()) {
	// Add the current inputs to the skid buffer so they can be
	// reprocessed when this stage unblocks.
	skidInsert(tid);
	}

	status_change = unblock(tid) \|\| status_change;
	}
	}

	template <class Impl>
	void
	DefaultDecode<Impl>::decodeInsts(ThreadID tid)
	{
	// Instructions can come either from the skid buffer or the list of
	// instructions coming from fetch, depending on decode's status.
	int insts_available = decodeStatus[tid] == Unblocking ?
	skidBuffer[tid].size() : insts[tid].size();

	if (insts_available == 0) {
	DPRINTF(Decode, "[tid:%i] Nothing to do, breaking out"
	" early.\n",tid);
	// Should I change the status to idle?
	++stats.idleCycles;
	return;
	} else if (decodeStatus[tid] == Unblocking) {
	DPRINTF(Decode, "[tid:%i] Unblocking, removing insts from skid "
	"buffer.\n",tid);
	++stats.unblockCycles;
	} else if (decodeStatus[tid] == Running) {
	++stats.runCycles;
	}

	std::queue<DynInstPtr>
	&insts_to_decode = decodeStatus[tid] == Unblocking ?
	skidBuffer[tid] : insts[tid];

	DPRINTF(Decode, "[tid:%i] Sending instruction to rename.\n",tid);

	while (insts_available > 0 && toRenameIndex < decodeWidth) {
	assert(!insts_to_decode.empty());

	DynInstPtr inst = std::move(insts_to_decode.front());

	insts_to_decode.pop();

	DPRINTF(Decode, "[tid:%i] Processing instruction [sn:%lli] with "
	"PC %s\n", tid, inst->seqNum, inst->pcState());

	if (inst->isSquashed()) {
	DPRINTF(Decode, "[tid:%i] Instruction %i with PC %s is "
	"squashed, skipping.\n",
	tid, inst->seqNum, inst->pcState());

	++stats.squashedInsts;

	--insts_available;

	continue;
	}

	// Also check if instructions have no source registers. Mark
	// them as ready to issue at any time. Not sure if this check
	// should exist here or at a later stage; however it doesn't matter
	// too much for function correctness.
	if (inst->numSrcRegs() == 0) {
	inst->setCanIssue();
	}

	// This current instruction is valid, so add it into the decode
	// queue. The next instruction may not be valid, so check to
	// see if branches were predicted correctly.
	toRename->insts[toRenameIndex] = inst;

	++(toRename->size);
	++toRenameIndex;
	++stats.decodedInsts;
	--insts_available;

	#if TRACING_ON
	if (DTRACE(O3PipeView)) {
	inst->decodeTick = curTick() - inst->fetchTick;
	}
	#endif

	// Ensure that if it was predicted as a branch, it really is a
	// branch.
	if (inst->readPredTaken() && !inst->isControl()) {
	panic("Instruction predicted as a branch!");

	++stats.controlMispred;

	// Might want to set some sort of boolean and just do
	// a check at the end
	squash(inst, inst->threadNumber);

	break;
	}

	// Go ahead and compute any PC-relative branches.
	// This includes direct unconditional control and
	// direct conditional control that is predicted taken.
	if (inst->isDirectCtrl() &&
	(inst->isUncondCtrl() \|\| inst->readPredTaken()))
	{
	++stats.branchResolved;

	if (!(inst->branchTarget() == inst->readPredTarg())) {
	++stats.branchMispred;

	// Might want to set some sort of boolean and just do
	// a check at the end
	squash(inst, inst->threadNumber);
	TheISA::PCState target = inst->branchTarget();

	DPRINTF(Decode,
	"[tid:%i] [sn:%llu] "
	"Updating predictions: Wrong predicted target: %s \
	PredPC: %s\n",
	tid, inst->seqNum, inst->readPredTarg(), target);
	//The micro pc after an instruction level branch should be 0
	inst->setPredTarg(target);
	break;
	}
	}
	}

	// If we didn't process all instructions, then we will need to block
	// and put all those instructions into the skid buffer.
	if (!insts_to_decode.empty()) {
	block(tid);
	}

	// Record that decode has written to the time buffer for activity
	// tracking.
	if (toRenameIndex) {
	wroteToTimeBuffer = true;
	}
	}

	#endif//__CPU_O3_DECODE_IMPL_HH__