| /* | |
| * Copyright (c) 2011, 2017 ARM Limited | |
| * All rights reserved | |
| * | |
| * The license below extends only to copyright in the software and shall | |
| * not be construed as granting a license to any other intellectual | |
| * property including but not limited to intellectual property relating | |
| * to a hardware implementation of the functionality of the software | |
| * licensed hereunder. You may use the software subject to the license | |
| * terms below provided that you ensure that this notice is replicated | |
| * unmodified and in its entirety in all distributions of the software, | |
| * modified or unmodified, in source code or in binary form. | |
| * | |
| * Copyright (c) 2003-2005 The Regents of The University of Michigan | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are | |
| * met: redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer; | |
| * redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution; | |
| * neither the name of the copyright holders nor the names of its | |
| * contributors may be used to endorse or promote products derived from | |
| * this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| * Authors: Nathan Binkert | |
| */ | |
| #ifdef linux | |
| #define _GNU_SOURCE | |
| #include <sched.h> | |
| #endif | |
| #include <err.h> | |
| #include <fcntl.h> | |
| #include <inttypes.h> | |
| #include <stdio.h> | |
| #include <stdlib.h> | |
| #include <string.h> | |
| #include <sys/mman.h> | |
| #include <sys/stat.h> | |
| #include <sys/types.h> | |
| #include <unistd.h> | |
| #include <gem5/m5ops.h> | |
| #include "m5_mmap.h" | |
| char *progname; | |
| char *command = "unspecified"; | |
| void usage(); | |
| void | |
| parse_int_args(int argc, char *argv[], uint64_t ints[], int len) | |
| { | |
| if (argc > len) | |
| usage(); | |
| // On 32 bit platforms we need to use strtoull to do the conversion | |
| #ifdef __LP64__ | |
| #define strto64 strtoul | |
| #else | |
| #define strto64 strtoull | |
| #endif | |
| int i; | |
| for (i = 0; i < len; ++i) | |
| ints[i] = (i < argc) ? strto64(argv[i], NULL, 0) : 0; | |
| #undef strto64 | |
| } | |
| void | |
| parse_str_args_to_regs(int argc, char *argv[], uint64_t regs[], int len) | |
| { | |
| if (argc > 1 || (argc > 0 && strlen(argv[0]) > len * sizeof(uint64_t))) | |
| usage(); | |
| int i; | |
| for (i = 0; i < len; i++) | |
| regs[i] = 0; | |
| if (argc == 0) | |
| return; | |
| int n; | |
| for (n = 0, i = 0; i < len && n < strlen(argv[0]); n++) { | |
| *((char *)(®s[i]) + (n % 8)) = argv[0][n]; | |
| if ((n % 8) == 7) | |
| i++; | |
| } | |
| } | |
| int | |
| read_file(int dest_fid) | |
| { | |
| uint8_t buf[256*1024]; | |
| int offset = 0; | |
| int len, ret; | |
| // Touch all buffer pages to ensure they are mapped in the | |
| // page table. This is required in the case of X86_FS, where | |
| // Linux does demand paging. | |
| memset(buf, 0, sizeof(buf)); | |
| while ((len = m5_read_file(buf, sizeof(buf), offset)) > 0) { | |
| uint8_t *base = buf; | |
| offset += len; | |
| do { | |
| ret = write(dest_fid, base, len); | |
| if (ret < 0) { | |
| perror("Failed to write file"); | |
| exit(2); | |
| } else if (ret == 0) { | |
| fprintf(stderr, "Failed to write file: " | |
| "Unhandled short write\n"); | |
| exit(2); | |
| } | |
| base += ret; | |
| len -= ret; | |
| } while (len); | |
| } | |
| return offset; | |
| } | |
| void | |
| write_file(const char *filename, const char *host_filename) | |
| { | |
| fprintf(stderr, "opening %s\n", filename); | |
| int src_fid = open(filename, O_RDONLY); | |
| if (src_fid < 0) { | |
| fprintf(stderr, "error opening %s\n", filename); | |
| return; | |
| } | |
| char buf[256*1024]; | |
| int offset = 0; | |
| int len; | |
| int bytes = 0; | |
| memset(buf, 0, sizeof(buf)); | |
| while ((len = read(src_fid, buf, sizeof(buf))) > 0) { | |
| bytes += m5_write_file(buf, len, offset, host_filename); | |
| offset += len; | |
| } | |
| fprintf(stderr, "written %d bytes\n", bytes); | |
| close(src_fid); | |
| } | |
| void | |
| do_exit(int argc, char *argv[]) | |
| { | |
| if (argc > 1) | |
| usage(); | |
| uint64_t ints[1]; | |
| parse_int_args(argc, argv, ints, 1); | |
| m5_exit(ints[0]); | |
| } | |
| void | |
| do_fail(int argc, char *argv[]) | |
| { | |
| if (argc < 1 || argc > 2) | |
| usage(); | |
| uint64_t ints[2] = {0,0}; | |
| parse_int_args(argc, argv, ints, argc); | |
| m5_fail(ints[1], ints[0]); | |
| } | |
| void | |
| do_reset_stats(int argc, char *argv[]) | |
| { | |
| uint64_t ints[2]; | |
| parse_int_args(argc, argv, ints, 2); | |
| m5_reset_stats(ints[0], ints[1]); | |
| } | |
| void | |
| do_dump_stats(int argc, char *argv[]) | |
| { | |
| uint64_t ints[2]; | |
| parse_int_args(argc, argv, ints, 2); | |
| m5_dump_stats(ints[0], ints[1]); | |
| } | |
| void | |
| do_dump_reset_stats(int argc, char *argv[]) | |
| { | |
| uint64_t ints[2]; | |
| parse_int_args(argc, argv, ints, 2); | |
| m5_dump_reset_stats(ints[0], ints[1]); | |
| } | |
| void | |
| do_read_file(int argc, char *argv[]) | |
| { | |
| if (argc > 0) | |
| usage(); | |
| read_file(STDOUT_FILENO); | |
| } | |
| void | |
| do_write_file(int argc, char *argv[]) | |
| { | |
| if (argc != 1 && argc != 2) | |
| usage(); | |
| const char *filename = argv[0]; | |
| const char *host_filename = (argc == 2) ? argv[1] : argv[0]; | |
| write_file(filename, host_filename); | |
| } | |
| void | |
| do_exec_file(int argc, char *argv[]) | |
| { | |
| if (argc > 0) | |
| usage(); | |
| const char *destname = "/tmp/execfile"; | |
| int fid = open(destname, O_WRONLY, 0777); | |
| int len = read_file(fid); | |
| close(fid); | |
| if (len > 0) { | |
| execl(destname, "execfile", NULL); | |
| err(1, "execl failed!"); | |
| } | |
| } | |
| void | |
| do_checkpoint(int argc, char *argv[]) | |
| { | |
| uint64_t ints[2]; | |
| parse_int_args(argc, argv, ints, 2); | |
| m5_checkpoint(ints[0], ints[1]); | |
| } | |
| void | |
| do_addsymbol(int argc, char *argv[]) | |
| { | |
| if (argc != 2) | |
| usage(); | |
| uint64_t addr = strtoul(argv[0], NULL, 0); | |
| char *symbol = argv[1]; | |
| m5_add_symbol(addr, symbol); | |
| } | |
| void | |
| do_loadsymbol(int argc, char *argv[]) | |
| { | |
| if (argc > 0) | |
| usage(); | |
| m5_load_symbol(); | |
| } | |
| void | |
| do_initparam(int argc, char *argv[]) | |
| { | |
| if (argc > 1) | |
| usage(); | |
| uint64_t key_str[2]; | |
| parse_str_args_to_regs(argc, argv, key_str, 2); | |
| uint64_t val = m5_init_param(key_str[0], key_str[1]); | |
| printf("%"PRIu64, val); | |
| } | |
| void | |
| do_sw99param(int argc, char *argv[]) | |
| { | |
| if (argc != 0) | |
| usage(); | |
| uint64_t param = m5_init_param(0, 0); | |
| // run-time, rampup-time, rampdown-time, warmup-time, connections | |
| printf("%"PRId64" %"PRId64" %"PRId64" %"PRId64" %"PRId64, | |
| (param >> 48) & 0xfff, | |
| (param >> 36) & 0xfff, (param >> 24) & 0xfff, | |
| (param >> 12) & 0xfff, (param >> 0) & 0xfff); | |
| } | |
| #ifdef linux | |
| void | |
| do_pin(int argc, char *argv[]) | |
| { | |
| if (argc < 2) | |
| usage(); | |
| cpu_set_t mask; | |
| CPU_ZERO(&mask); | |
| const char *sep = ","; | |
| char *target = strtok(argv[0], sep); | |
| while (target) { | |
| CPU_SET(atoi(target), &mask); | |
| target = strtok(NULL, sep); | |
| } | |
| if (sched_setaffinity(0, sizeof(cpu_set_t), &mask) < 0) | |
| err(1, "setaffinity"); | |
| execvp(argv[1], &argv[1]); | |
| err(1, "execvp failed!"); | |
| } | |
| #endif | |
| struct MainFunc | |
| { | |
| char *name; | |
| void (*func)(int argc, char *argv[]); | |
| char *usage; | |
| }; | |
| struct MainFunc mainfuncs[] = { | |
| { "exit", do_exit, "[delay]" }, | |
| { "fail", do_fail, "<code> [delay]" }, | |
| { "resetstats", do_reset_stats, "[delay [period]]" }, | |
| { "dumpstats", do_dump_stats, "[delay [period]]" }, | |
| { "dumpresetstats", do_dump_reset_stats, "[delay [period]]" }, | |
| { "readfile", do_read_file, "" }, | |
| { "writefile", do_write_file, "<filename> [host filename]" }, | |
| { "execfile", do_exec_file, "" }, | |
| { "checkpoint", do_checkpoint, "[delay [period]]" }, | |
| { "addsymbol", do_addsymbol, "<address> <symbol>" }, | |
| { "loadsymbol", do_loadsymbol, "" }, | |
| { "initparam", do_initparam, "[key] // key must be shorter" | |
| " than 16 chars" }, | |
| { "sw99param", do_sw99param, "" }, | |
| #ifdef linux | |
| { "pin", do_pin, "<cpu> <program> [args ...]" } | |
| #endif | |
| }; | |
| int numfuncs = sizeof(mainfuncs) / sizeof(mainfuncs[0]); | |
| void | |
| usage() | |
| { | |
| int i; | |
| for (i = 0; i < numfuncs; ++i) { | |
| char *header = i ? "" : "usage:"; | |
| fprintf(stderr, "%-6s %s %s %s\n", | |
| header, progname, mainfuncs[i].name, mainfuncs[i].usage); | |
| } | |
| fprintf(stderr, "\n"); | |
| fprintf(stderr, "All times in nanoseconds!\n"); | |
| exit(1); | |
| } | |
| int | |
| main(int argc, char *argv[]) | |
| { | |
| progname = argv[0]; | |
| if (argc < 2) | |
| usage(1); | |
| map_m5_mem(); | |
| command = argv[1]; | |
| argv += 2; | |
| argc -= 2; | |
| int i; | |
| for (i = 0; i < numfuncs; ++i) { | |
| if (strcmp(command, mainfuncs[i].name) != 0) | |
| continue; | |
| mainfuncs[i].func(argc, argv); | |
| exit(0); | |
| } | |
| usage(1); | |
| } |