| /* |
| * Copyright (c) 2002-2005 The Regents of The University of Michigan |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "arch/utility.hh" |
| #include "cpu/exetrace.hh" |
| #include "cpu/simple/atomic.hh" |
| #include "mem/packet_impl.hh" |
| #include "sim/builder.hh" |
| |
| using namespace std; |
| using namespace TheISA; |
| |
| AtomicSimpleCPU::TickEvent::TickEvent(AtomicSimpleCPU *c) |
| : Event(&mainEventQueue, CPU_Tick_Pri), cpu(c) |
| { |
| } |
| |
| |
| void |
| AtomicSimpleCPU::TickEvent::process() |
| { |
| cpu->tick(); |
| } |
| |
| const char * |
| AtomicSimpleCPU::TickEvent::description() |
| { |
| return "AtomicSimpleCPU tick event"; |
| } |
| |
| |
| void |
| AtomicSimpleCPU::init() |
| { |
| //Create Memory Ports (conect them up) |
| Port *mem_dport = mem->getPort(""); |
| dcachePort.setPeer(mem_dport); |
| mem_dport->setPeer(&dcachePort); |
| |
| Port *mem_iport = mem->getPort(""); |
| icachePort.setPeer(mem_iport); |
| mem_iport->setPeer(&icachePort); |
| |
| BaseCPU::init(); |
| #if FULL_SYSTEM |
| for (int i = 0; i < execContexts.size(); ++i) { |
| ExecContext *xc = execContexts[i]; |
| |
| // initialize CPU, including PC |
| TheISA::initCPU(xc, xc->readCpuId()); |
| } |
| #endif |
| } |
| |
| bool |
| AtomicSimpleCPU::CpuPort::recvTiming(Packet *pkt) |
| { |
| panic("AtomicSimpleCPU doesn't expect recvAtomic callback!"); |
| return true; |
| } |
| |
| Tick |
| AtomicSimpleCPU::CpuPort::recvAtomic(Packet *pkt) |
| { |
| panic("AtomicSimpleCPU doesn't expect recvAtomic callback!"); |
| return curTick; |
| } |
| |
| void |
| AtomicSimpleCPU::CpuPort::recvFunctional(Packet *pkt) |
| { |
| panic("AtomicSimpleCPU doesn't expect recvFunctional callback!"); |
| } |
| |
| void |
| AtomicSimpleCPU::CpuPort::recvStatusChange(Status status) |
| { |
| if (status == RangeChange) |
| return; |
| |
| panic("AtomicSimpleCPU doesn't expect recvStatusChange callback!"); |
| } |
| |
| Packet * |
| AtomicSimpleCPU::CpuPort::recvRetry() |
| { |
| panic("AtomicSimpleCPU doesn't expect recvRetry callback!"); |
| return NULL; |
| } |
| |
| |
| AtomicSimpleCPU::AtomicSimpleCPU(Params *p) |
| : BaseSimpleCPU(p), tickEvent(this), |
| width(p->width), simulate_stalls(p->simulate_stalls), |
| icachePort(this), dcachePort(this) |
| { |
| _status = Idle; |
| |
| ifetch_req = new Request(true); |
| ifetch_req->setAsid(0); |
| // @todo fix me and get the real cpu iD!!! |
| ifetch_req->setCpuNum(0); |
| ifetch_req->setSize(sizeof(MachInst)); |
| ifetch_pkt = new Packet; |
| ifetch_pkt->cmd = Read; |
| ifetch_pkt->dataStatic(&inst); |
| ifetch_pkt->req = ifetch_req; |
| ifetch_pkt->size = sizeof(MachInst); |
| ifetch_pkt->dest = Packet::Broadcast; |
| |
| data_read_req = new Request(true); |
| // @todo fix me and get the real cpu iD!!! |
| data_read_req->setCpuNum(0); |
| data_read_req->setAsid(0); |
| data_read_pkt = new Packet; |
| data_read_pkt->cmd = Read; |
| data_read_pkt->dataStatic(&dataReg); |
| data_read_pkt->req = data_read_req; |
| data_read_pkt->dest = Packet::Broadcast; |
| |
| data_write_req = new Request(true); |
| // @todo fix me and get the real cpu iD!!! |
| data_write_req->setCpuNum(0); |
| data_write_req->setAsid(0); |
| data_write_pkt = new Packet; |
| data_write_pkt->cmd = Write; |
| data_write_pkt->req = data_write_req; |
| data_write_pkt->dest = Packet::Broadcast; |
| } |
| |
| |
| AtomicSimpleCPU::~AtomicSimpleCPU() |
| { |
| } |
| |
| void |
| AtomicSimpleCPU::serialize(ostream &os) |
| { |
| BaseSimpleCPU::serialize(os); |
| SERIALIZE_ENUM(_status); |
| nameOut(os, csprintf("%s.tickEvent", name())); |
| tickEvent.serialize(os); |
| } |
| |
| void |
| AtomicSimpleCPU::unserialize(Checkpoint *cp, const string §ion) |
| { |
| BaseSimpleCPU::unserialize(cp, section); |
| UNSERIALIZE_ENUM(_status); |
| tickEvent.unserialize(cp, csprintf("%s.tickEvent", section)); |
| } |
| |
| void |
| AtomicSimpleCPU::switchOut(Sampler *s) |
| { |
| sampler = s; |
| if (status() == Running) { |
| _status = SwitchedOut; |
| |
| tickEvent.squash(); |
| } |
| sampler->signalSwitched(); |
| } |
| |
| |
| void |
| AtomicSimpleCPU::takeOverFrom(BaseCPU *oldCPU) |
| { |
| BaseCPU::takeOverFrom(oldCPU); |
| |
| assert(!tickEvent.scheduled()); |
| |
| // if any of this CPU's ExecContexts are active, mark the CPU as |
| // running and schedule its tick event. |
| for (int i = 0; i < execContexts.size(); ++i) { |
| ExecContext *xc = execContexts[i]; |
| if (xc->status() == ExecContext::Active && _status != Running) { |
| _status = Running; |
| tickEvent.schedule(curTick); |
| break; |
| } |
| } |
| } |
| |
| |
| void |
| AtomicSimpleCPU::activateContext(int thread_num, int delay) |
| { |
| assert(thread_num == 0); |
| assert(cpuXC); |
| |
| assert(_status == Idle); |
| assert(!tickEvent.scheduled()); |
| |
| notIdleFraction++; |
| tickEvent.schedule(curTick + cycles(delay)); |
| _status = Running; |
| } |
| |
| |
| void |
| AtomicSimpleCPU::suspendContext(int thread_num) |
| { |
| assert(thread_num == 0); |
| assert(cpuXC); |
| |
| assert(_status == Running); |
| |
| // tick event may not be scheduled if this gets called from inside |
| // an instruction's execution, e.g. "quiesce" |
| if (tickEvent.scheduled()) |
| tickEvent.deschedule(); |
| |
| notIdleFraction--; |
| _status = Idle; |
| } |
| |
| |
| template <class T> |
| Fault |
| AtomicSimpleCPU::read(Addr addr, T &data, unsigned flags) |
| { |
| data_read_req->setVaddr(addr); |
| data_read_req->setSize(sizeof(T)); |
| data_read_req->setFlags(flags); |
| data_read_req->setTime(curTick); |
| |
| if (traceData) { |
| traceData->setAddr(addr); |
| } |
| |
| // translate to physical address |
| Fault fault = cpuXC->translateDataReadReq(data_read_req); |
| |
| // Now do the access. |
| if (fault == NoFault) { |
| data_read_pkt->reset(); |
| data_read_pkt->addr = data_read_req->getPaddr(); |
| data_read_pkt->size = sizeof(T); |
| |
| dcache_complete = dcachePort.sendAtomic(data_read_pkt); |
| dcache_access = true; |
| |
| assert(data_read_pkt->result == Success); |
| data = data_read_pkt->get<T>(); |
| |
| } |
| |
| // This will need a new way to tell if it has a dcache attached. |
| if (data_read_req->getFlags() & UNCACHEABLE) |
| recordEvent("Uncached Read"); |
| |
| return fault; |
| } |
| |
| #ifndef DOXYGEN_SHOULD_SKIP_THIS |
| |
| template |
| Fault |
| AtomicSimpleCPU::read(Addr addr, uint64_t &data, unsigned flags); |
| |
| template |
| Fault |
| AtomicSimpleCPU::read(Addr addr, uint32_t &data, unsigned flags); |
| |
| template |
| Fault |
| AtomicSimpleCPU::read(Addr addr, uint16_t &data, unsigned flags); |
| |
| template |
| Fault |
| AtomicSimpleCPU::read(Addr addr, uint8_t &data, unsigned flags); |
| |
| #endif //DOXYGEN_SHOULD_SKIP_THIS |
| |
| template<> |
| Fault |
| AtomicSimpleCPU::read(Addr addr, double &data, unsigned flags) |
| { |
| return read(addr, *(uint64_t*)&data, flags); |
| } |
| |
| template<> |
| Fault |
| AtomicSimpleCPU::read(Addr addr, float &data, unsigned flags) |
| { |
| return read(addr, *(uint32_t*)&data, flags); |
| } |
| |
| |
| template<> |
| Fault |
| AtomicSimpleCPU::read(Addr addr, int32_t &data, unsigned flags) |
| { |
| return read(addr, (uint32_t&)data, flags); |
| } |
| |
| |
| template <class T> |
| Fault |
| AtomicSimpleCPU::write(T data, Addr addr, unsigned flags, uint64_t *res) |
| { |
| data_write_req->setVaddr(addr); |
| data_write_req->setTime(curTick); |
| data_write_req->setSize(sizeof(T)); |
| data_write_req->setFlags(flags); |
| |
| if (traceData) { |
| traceData->setAddr(addr); |
| } |
| |
| // translate to physical address |
| Fault fault = cpuXC->translateDataWriteReq(data_write_req); |
| |
| // Now do the access. |
| if (fault == NoFault) { |
| data_write_pkt->reset(); |
| data = htog(data); |
| data_write_pkt->dataStatic(&data); |
| data_write_pkt->addr = data_write_req->getPaddr(); |
| data_write_pkt->size = sizeof(T); |
| |
| dcache_complete = dcachePort.sendAtomic(data_write_pkt); |
| dcache_access = true; |
| |
| assert(data_write_pkt->result == Success); |
| |
| if (res && data_write_req->getFlags() & LOCKED) { |
| *res = data_write_req->getScResult(); |
| } |
| } |
| |
| // This will need a new way to tell if it's hooked up to a cache or not. |
| if (data_write_req->getFlags() & UNCACHEABLE) |
| recordEvent("Uncached Write"); |
| |
| // If the write needs to have a fault on the access, consider calling |
| // changeStatus() and changing it to "bad addr write" or something. |
| return fault; |
| } |
| |
| |
| #ifndef DOXYGEN_SHOULD_SKIP_THIS |
| template |
| Fault |
| AtomicSimpleCPU::write(uint64_t data, Addr addr, |
| unsigned flags, uint64_t *res); |
| |
| template |
| Fault |
| AtomicSimpleCPU::write(uint32_t data, Addr addr, |
| unsigned flags, uint64_t *res); |
| |
| template |
| Fault |
| AtomicSimpleCPU::write(uint16_t data, Addr addr, |
| unsigned flags, uint64_t *res); |
| |
| template |
| Fault |
| AtomicSimpleCPU::write(uint8_t data, Addr addr, |
| unsigned flags, uint64_t *res); |
| |
| #endif //DOXYGEN_SHOULD_SKIP_THIS |
| |
| template<> |
| Fault |
| AtomicSimpleCPU::write(double data, Addr addr, unsigned flags, uint64_t *res) |
| { |
| return write(*(uint64_t*)&data, addr, flags, res); |
| } |
| |
| template<> |
| Fault |
| AtomicSimpleCPU::write(float data, Addr addr, unsigned flags, uint64_t *res) |
| { |
| return write(*(uint32_t*)&data, addr, flags, res); |
| } |
| |
| |
| template<> |
| Fault |
| AtomicSimpleCPU::write(int32_t data, Addr addr, unsigned flags, uint64_t *res) |
| { |
| return write((uint32_t)data, addr, flags, res); |
| } |
| |
| |
| void |
| AtomicSimpleCPU::tick() |
| { |
| Tick latency = cycles(1); // instruction takes one cycle by default |
| |
| for (int i = 0; i < width; ++i) { |
| numCycles++; |
| |
| checkForInterrupts(); |
| |
| ifetch_req->resetMin(); |
| ifetch_pkt->reset(); |
| Fault fault = setupFetchPacket(ifetch_pkt); |
| |
| if (fault == NoFault) { |
| Tick icache_complete = icachePort.sendAtomic(ifetch_pkt); |
| // ifetch_req is initialized to read the instruction directly |
| // into the CPU object's inst field. |
| |
| dcache_access = false; // assume no dcache access |
| preExecute(); |
| fault = curStaticInst->execute(this, traceData); |
| postExecute(); |
| |
| if (traceData) { |
| traceData->finalize(); |
| } |
| |
| if (simulate_stalls) { |
| // This calculation assumes that the icache and dcache |
| // access latencies are always a multiple of the CPU's |
| // cycle time. If not, the next tick event may get |
| // scheduled at a non-integer multiple of the CPU |
| // cycle time. |
| Tick icache_stall = icache_complete - curTick - cycles(1); |
| Tick dcache_stall = |
| dcache_access ? dcache_complete - curTick - cycles(1) : 0; |
| latency += icache_stall + dcache_stall; |
| } |
| |
| } |
| |
| advancePC(fault); |
| } |
| |
| if (_status != Idle) |
| tickEvent.schedule(curTick + latency); |
| } |
| |
| |
| //////////////////////////////////////////////////////////////////////// |
| // |
| // AtomicSimpleCPU Simulation Object |
| // |
| BEGIN_DECLARE_SIM_OBJECT_PARAMS(AtomicSimpleCPU) |
| |
| Param<Counter> max_insts_any_thread; |
| Param<Counter> max_insts_all_threads; |
| Param<Counter> max_loads_any_thread; |
| Param<Counter> max_loads_all_threads; |
| SimObjectParam<MemObject *> mem; |
| |
| #if FULL_SYSTEM |
| SimObjectParam<AlphaITB *> itb; |
| SimObjectParam<AlphaDTB *> dtb; |
| SimObjectParam<System *> system; |
| Param<int> cpu_id; |
| Param<Tick> profile; |
| #else |
| SimObjectParam<Process *> workload; |
| #endif // FULL_SYSTEM |
| |
| Param<int> clock; |
| |
| Param<bool> defer_registration; |
| Param<int> width; |
| Param<bool> function_trace; |
| Param<Tick> function_trace_start; |
| Param<bool> simulate_stalls; |
| |
| END_DECLARE_SIM_OBJECT_PARAMS(AtomicSimpleCPU) |
| |
| BEGIN_INIT_SIM_OBJECT_PARAMS(AtomicSimpleCPU) |
| |
| INIT_PARAM(max_insts_any_thread, |
| "terminate when any thread reaches this inst count"), |
| INIT_PARAM(max_insts_all_threads, |
| "terminate when all threads have reached this inst count"), |
| INIT_PARAM(max_loads_any_thread, |
| "terminate when any thread reaches this load count"), |
| INIT_PARAM(max_loads_all_threads, |
| "terminate when all threads have reached this load count"), |
| INIT_PARAM(mem, "memory"), |
| |
| #if FULL_SYSTEM |
| INIT_PARAM(itb, "Instruction TLB"), |
| INIT_PARAM(dtb, "Data TLB"), |
| INIT_PARAM(system, "system object"), |
| INIT_PARAM(cpu_id, "processor ID"), |
| INIT_PARAM(profile, ""), |
| #else |
| INIT_PARAM(workload, "processes to run"), |
| #endif // FULL_SYSTEM |
| |
| INIT_PARAM(clock, "clock speed"), |
| INIT_PARAM(defer_registration, "defer system registration (for sampling)"), |
| INIT_PARAM(width, "cpu width"), |
| INIT_PARAM(function_trace, "Enable function trace"), |
| INIT_PARAM(function_trace_start, "Cycle to start function trace"), |
| INIT_PARAM(simulate_stalls, "Simulate cache stall cycles") |
| |
| END_INIT_SIM_OBJECT_PARAMS(AtomicSimpleCPU) |
| |
| |
| CREATE_SIM_OBJECT(AtomicSimpleCPU) |
| { |
| AtomicSimpleCPU::Params *params = new AtomicSimpleCPU::Params(); |
| params->name = getInstanceName(); |
| params->numberOfThreads = 1; |
| params->max_insts_any_thread = max_insts_any_thread; |
| params->max_insts_all_threads = max_insts_all_threads; |
| params->max_loads_any_thread = max_loads_any_thread; |
| params->max_loads_all_threads = max_loads_all_threads; |
| params->deferRegistration = defer_registration; |
| params->clock = clock; |
| params->functionTrace = function_trace; |
| params->functionTraceStart = function_trace_start; |
| params->width = width; |
| params->simulate_stalls = simulate_stalls; |
| params->mem = mem; |
| |
| #if FULL_SYSTEM |
| params->itb = itb; |
| params->dtb = dtb; |
| params->system = system; |
| params->cpu_id = cpu_id; |
| params->profile = profile; |
| #else |
| params->process = workload; |
| #endif |
| |
| AtomicSimpleCPU *cpu = new AtomicSimpleCPU(params); |
| return cpu; |
| } |
| |
| REGISTER_SIM_OBJECT("AtomicSimpleCPU", AtomicSimpleCPU) |
| |