| # -*- mode:python -*- |
| |
| # Copyright (c) 2007-2008 The Hewlett-Packard Development Company |
| # All rights reserved. |
| # |
| # The license below extends only to copyright in the software and shall |
| # not be construed as granting a license to any other intellectual |
| # property including but not limited to intellectual property relating |
| # to a hardware implementation of the functionality of the software |
| # licensed hereunder. You may use the software subject to the license |
| # terms below provided that you ensure that this notice is replicated |
| # unmodified and in its entirety in all distributions of the software, |
| # modified or unmodified, in source code or in binary form. |
| # |
| # Copyright (c) 2005-2006 The Regents of The University of Michigan |
| # All rights reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are |
| # met: redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer; |
| # redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution; |
| # neither the name of the copyright holders nor the names of its |
| # contributors may be used to endorse or promote products derived from |
| # this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| Import('*') |
| |
| Source('cpuid.cc', tags='x86 isa') |
| Source('decoder.cc', tags='x86 isa') |
| Source('decoder_tables.cc', tags='x86 isa') |
| Source('emulenv.cc', tags='x86 isa') |
| Source('faults.cc', tags='x86 isa') |
| Source('fs_workload.cc', tags='x86 isa') |
| Source('insts/badmicroop.cc', tags='x86 isa') |
| Source('insts/microop.cc', tags='x86 isa') |
| Source('insts/microregop.cc', tags='x86 isa') |
| Source('insts/static_inst.cc', tags='x86 isa') |
| Source('interrupts.cc', tags='x86 isa') |
| Source('isa.cc', tags='x86 isa') |
| Source('nativetrace.cc', tags='x86 isa') |
| Source('pagetable.cc', tags='x86 isa') |
| Source('pagetable_walker.cc', tags='x86 isa') |
| Source('process.cc', tags='x86 isa') |
| Source('remote_gdb.cc', tags='x86 isa') |
| Source('tlb.cc', tags='x86 isa') |
| Source('types.cc', tags='x86 isa') |
| Source('utility.cc', tags='x86 isa') |
| |
| SimObject('X86SeWorkload.py', tags='x86 isa') |
| SimObject('X86FsWorkload.py', tags='x86 isa') |
| SimObject('X86ISA.py', tags='x86 isa') |
| SimObject('X86LocalApic.py', tags='x86 isa') |
| SimObject('X86MMU.py', tags='x86 isa') |
| SimObject('X86NativeTrace.py', tags='x86 isa') |
| SimObject('X86TLB.py', tags='x86 isa') |
| |
| DebugFlag('LocalApic', "Local APIC debugging", tags='x86 isa') |
| DebugFlag('X86', "Generic X86 ISA debugging", tags='x86 isa') |
| DebugFlag('ACPI', "ACPI debugging", tags='x86 isa') |
| |
| python_files = ( |
| '__init__.py', |
| 'general_purpose/__init__.py', |
| 'general_purpose/arithmetic/__init__.py', |
| 'general_purpose/arithmetic/add_and_subtract.py', |
| 'general_purpose/arithmetic/increment_and_decrement.py', |
| 'general_purpose/arithmetic/multiply_and_divide.py', |
| 'general_purpose/cache_and_memory_management.py', |
| 'general_purpose/compare_and_test/__init__.py', |
| 'general_purpose/compare_and_test/bit_scan.py', |
| 'general_purpose/compare_and_test/bit_test.py', |
| 'general_purpose/compare_and_test/bounds.py', |
| 'general_purpose/compare_and_test/compare.py', |
| 'general_purpose/compare_and_test/set_byte_on_condition.py', |
| 'general_purpose/compare_and_test/test.py', |
| 'general_purpose/control_transfer/__init__.py', |
| 'general_purpose/control_transfer/call.py', |
| 'general_purpose/control_transfer/conditional_jump.py', |
| 'general_purpose/control_transfer/interrupts_and_exceptions.py', |
| 'general_purpose/control_transfer/jump.py', |
| 'general_purpose/control_transfer/loop.py', |
| 'general_purpose/control_transfer/xreturn.py', |
| 'general_purpose/data_conversion/__init__.py', |
| 'general_purpose/data_conversion/ascii_adjust.py', |
| 'general_purpose/data_conversion/bcd_adjust.py', |
| 'general_purpose/data_conversion/endian_conversion.py', |
| 'general_purpose/data_conversion/extract_sign_mask.py', |
| 'general_purpose/data_conversion/sign_extension.py', |
| 'general_purpose/data_conversion/translate.py', |
| 'general_purpose/data_transfer/__init__.py', |
| 'general_purpose/data_transfer/conditional_move.py', |
| 'general_purpose/data_transfer/move.py', |
| 'general_purpose/data_transfer/stack_operations.py', |
| 'general_purpose/data_transfer/xchg.py', |
| 'general_purpose/flags/__init__.py', |
| 'general_purpose/flags/load_and_store.py', |
| 'general_purpose/flags/push_and_pop.py', |
| 'general_purpose/flags/set_and_clear.py', |
| 'general_purpose/input_output/__init__.py', |
| 'general_purpose/input_output/general_io.py', |
| 'general_purpose/input_output/string_io.py', |
| 'general_purpose/load_effective_address.py', |
| 'general_purpose/load_segment_registers.py', |
| 'general_purpose/logical.py', |
| 'general_purpose/no_operation.py', |
| 'general_purpose/rotate_and_shift/__init__.py', |
| 'general_purpose/rotate_and_shift/rotate.py', |
| 'general_purpose/rotate_and_shift/shift.py', |
| 'general_purpose/semaphores.py', |
| 'general_purpose/string/__init__.py', |
| 'general_purpose/string/compare_strings.py', |
| 'general_purpose/string/load_string.py', |
| 'general_purpose/string/move_string.py', |
| 'general_purpose/string/scan_string.py', |
| 'general_purpose/string/store_string.py', |
| 'general_purpose/system_calls.py', |
| 'romutil.py', |
| 'system/__init__.py', |
| 'system/control_registers.py', |
| 'system/halt.py', |
| 'system/invlpg.py', |
| 'system/undefined_operation.py', |
| 'system/msrs.py', |
| 'system/segmentation.py', |
| 'simd128/__init__.py', |
| 'simd128/integer/__init__.py', |
| 'simd128/integer/data_transfer/__init__.py', |
| 'simd128/integer/data_transfer/move.py', |
| 'simd128/integer/data_transfer/move_non_temporal.py', |
| 'simd128/integer/data_transfer/move_mask.py', |
| 'simd128/integer/data_conversion/__init__.py', |
| 'simd128/integer/data_conversion/convert_mmx_integer_to_floating_point.py', |
| 'simd128/integer/data_conversion/convert_integer_to_floating_point.py', |
| 'simd128/integer/data_conversion/convert_gpr_integer_to_floating_point.py', |
| 'simd128/integer/data_reordering/__init__.py', |
| 'simd128/integer/data_reordering/unpack_and_interleave.py', |
| 'simd128/integer/data_reordering/pack_with_saturation.py', |
| 'simd128/integer/data_reordering/extract_and_insert.py', |
| 'simd128/integer/data_reordering/shuffle.py', |
| 'simd128/integer/arithmetic/__init__.py', |
| 'simd128/integer/arithmetic/subtraction.py', |
| 'simd128/integer/arithmetic/addition.py', |
| 'simd128/integer/arithmetic/multiplication.py', |
| 'simd128/integer/arithmetic/multiply_add.py', |
| 'simd128/integer/arithmetic/average.py', |
| 'simd128/integer/arithmetic/sum_of_absolute_differences.py', |
| 'simd128/integer/shift/__init__.py', |
| 'simd128/integer/shift/right_arithmetic_shift.py', |
| 'simd128/integer/shift/left_logical_shift.py', |
| 'simd128/integer/shift/right_logical_shift.py', |
| 'simd128/integer/compare/__init__.py', |
| 'simd128/integer/compare/compare_and_write_mask.py', |
| 'simd128/integer/compare/compare_and_write_minimum_or_maximum.py', |
| 'simd128/integer/logical/__init__.py', |
| 'simd128/integer/logical/pand.py', |
| 'simd128/integer/logical/por.py', |
| 'simd128/integer/logical/exclusive_or.py', |
| 'simd128/integer/save_and_restore_state/__init__.py', |
| 'simd128/integer/save_and_restore_state/save_and_restore_state.py', |
| 'simd128/integer/save_and_restore_state/' |
| 'save_and_restore_control_and_status.py', |
| 'simd128/floating_point/__init__.py', |
| 'simd128/floating_point/data_transfer/__init__.py', |
| 'simd128/floating_point/data_transfer/move_mask.py', |
| 'simd128/floating_point/data_transfer/move.py', |
| 'simd128/floating_point/data_transfer/move_with_duplication.py', |
| 'simd128/floating_point/data_transfer/move_non_temporal.py', |
| 'simd128/floating_point/data_conversion/__init__.py', |
| 'simd128/floating_point/data_conversion/' |
| 'convert_floating_point_to_floating_point.py', |
| 'simd128/floating_point/data_conversion/' |
| 'convert_floating_point_to_xmm_integer.py', |
| 'simd128/floating_point/data_conversion/' |
| 'convert_floating_point_to_mmx_integer.py', |
| 'simd128/floating_point/data_conversion/' |
| 'convert_floating_point_to_gpr_integer.py', |
| 'simd128/floating_point/data_reordering/__init__.py', |
| 'simd128/floating_point/data_reordering/unpack_and_interleave.py', |
| 'simd128/floating_point/data_reordering/shuffle.py', |
| 'simd128/floating_point/arithmetic/__init__.py', |
| 'simd128/floating_point/arithmetic/subtraction.py', |
| 'simd128/floating_point/arithmetic/addition.py', |
| 'simd128/floating_point/arithmetic/horizontal_subtraction.py', |
| 'simd128/floating_point/arithmetic/horizontal_addition.py', |
| 'simd128/floating_point/arithmetic/square_root.py', |
| 'simd128/floating_point/arithmetic/' |
| 'simultaneous_addition_and_subtraction.py', |
| 'simd128/floating_point/arithmetic/multiplication.py', |
| 'simd128/floating_point/arithmetic/division.py', |
| 'simd128/floating_point/arithmetic/reciprocal_square_root.py', |
| 'simd128/floating_point/arithmetic/reciprocal_estimation.py', |
| 'simd128/floating_point/compare/__init__.py', |
| 'simd128/floating_point/compare/compare_and_write_mask.py', |
| 'simd128/floating_point/compare/compare_and_write_rflags.py', |
| 'simd128/floating_point/compare/compare_and_write_minimum_or_maximum.py', |
| 'simd128/floating_point/logical/__init__.py', |
| 'simd128/floating_point/logical/andp.py', |
| 'simd128/floating_point/logical/orp.py', |
| 'simd128/floating_point/logical/exclusive_or.py', |
| 'simd64/__init__.py', |
| 'simd64/integer/__init__.py', |
| 'simd64/integer/data_transfer/__init__.py', |
| 'simd64/integer/data_transfer/move_mask.py', |
| 'simd64/integer/data_transfer/move.py', |
| 'simd64/integer/data_transfer/move_non_temporal.py', |
| 'simd64/integer/exit_media_state.py', |
| 'simd64/integer/data_reordering/__init__.py', |
| 'simd64/integer/data_reordering/unpack_and_interleave.py', |
| 'simd64/integer/data_reordering/pack_with_saturation.py', |
| 'simd64/integer/data_reordering/extract_and_insert.py', |
| 'simd64/integer/data_reordering/shuffle_and_swap.py', |
| 'simd64/integer/data_conversion.py', |
| 'simd64/integer/arithmetic/__init__.py', |
| 'simd64/integer/arithmetic/subtraction.py', |
| 'simd64/integer/arithmetic/addition.py', |
| 'simd64/integer/arithmetic/multiplication.py', |
| 'simd64/integer/arithmetic/multiply_add.py', |
| 'simd64/integer/arithmetic/average.py', |
| 'simd64/integer/arithmetic/sum_of_absolute_differences.py', |
| 'simd64/integer/shift/__init__.py', |
| 'simd64/integer/shift/right_arithmetic_shift.py', |
| 'simd64/integer/shift/left_logical_shift.py', |
| 'simd64/integer/shift/right_logical_shift.py', |
| 'simd64/integer/compare/__init__.py', |
| 'simd64/integer/compare/compare_and_write_mask.py', |
| 'simd64/integer/compare/compare_and_write_minimum_or_maximum.py', |
| 'simd64/integer/logical/__init__.py', |
| 'simd64/integer/logical/pand.py', |
| 'simd64/integer/logical/por.py', |
| 'simd64/integer/logical/exclusive_or.py', |
| 'simd64/integer/save_and_restore_state.py', |
| 'simd64/floating_point/__init__.py', |
| 'simd64/floating_point/arithmetic/__init__.py', |
| 'simd64/floating_point/arithmetic/subtraction.py', |
| 'simd64/floating_point/arithmetic/addition.py', |
| 'simd64/floating_point/arithmetic/reciprocal_estimation.py', |
| 'simd64/floating_point/arithmetic/multiplication.py', |
| 'simd64/floating_point/arithmetic/accumulation.py', |
| 'simd64/floating_point/arithmetic/reciprocal_square_root.py', |
| 'simd64/floating_point/data_conversion.py', |
| 'simd64/floating_point/compare/__init__.py', |
| 'simd64/floating_point/compare/compare_and_write_mask.py', |
| 'simd64/floating_point/compare/compare_and_write_minimum_or_maximum.py', |
| 'x87/__init__.py', |
| 'x87/data_transfer_and_conversion/__init__.py', |
| 'x87/data_transfer_and_conversion/convert_and_load_or_store_integer.py', |
| 'x87/data_transfer_and_conversion/load_or_store_floating_point.py', |
| 'x87/data_transfer_and_conversion/exchange.py', |
| 'x87/data_transfer_and_conversion/convert_and_load_or_store_bcd.py', |
| 'x87/data_transfer_and_conversion/conditional_move.py', |
| 'x87/data_transfer_and_conversion/extract.py', |
| 'x87/load_constants/__init__.py', |
| 'x87/load_constants/load_0_1_or_pi.py', |
| 'x87/load_constants/load_logarithm.py', |
| 'x87/arithmetic/__init__.py', |
| 'x87/arithmetic/subtraction.py', |
| 'x87/arithmetic/addition.py', |
| 'x87/arithmetic/partial_remainder.py', |
| 'x87/arithmetic/multiplication.py', |
| 'x87/arithmetic/division.py', |
| 'x87/arithmetic/change_sign.py', |
| 'x87/arithmetic/round.py', |
| 'x87/arithmetic/square_root.py', |
| 'x87/transcendental_functions/__init__.py', |
| 'x87/transcendental_functions/trigonometric_functions.py', |
| 'x87/transcendental_functions/logarithmic_functions.py', |
| 'x87/compare_and_test/__init__.py', |
| 'x87/compare_and_test/classify.py', |
| 'x87/compare_and_test/test.py', |
| 'x87/compare_and_test/floating_point_ordered_compare.py', |
| 'x87/compare_and_test/floating_point_unordered_compare.py', |
| 'x87/compare_and_test/integer_compare.py', |
| 'x87/stack_management/__init__.py', |
| 'x87/stack_management/stack_control.py', |
| 'x87/stack_management/clear_state.py', |
| 'x87/control/__init__.py', |
| 'x87/control/clear_exceptions.py', |
| 'x87/control/initialize.py', |
| 'x87/control/wait_for_exceptions.py', |
| 'x87/control/save_x87_status_word.py', |
| 'x87/control/save_and_restore_x87_control_word.py', |
| 'x87/control/save_and_restore_x87_environment.py', |
| 'x87/no_operation.py' |
| ) |
| |
| |
| # Add in files generated by the ISA description. |
| isa_desc_files = ISADesc('isa/main.isa', tags='x86 isa') |
| for f in isa_desc_files: |
| # Add in python file dependencies that won't be caught otherwise |
| for pyfile in python_files: |
| env.Depends(f, "isa/insts/%s" % pyfile) |
