| # Copyright (c) 2021 ARM Limited |
| # All rights reserved. |
| # |
| # The license below extends only to copyright in the software and shall |
| # not be construed as granting a license to any other intellectual |
| # property including but not limited to intellectual property relating |
| # to a hardware implementation of the functionality of the software |
| # licensed hereunder. You may use the software subject to the license |
| # terms below provided that you ensure that this notice is replicated |
| # unmodified and in its entirety in all distributions of the software, |
| # modified or unmodified, in source code or in binary form. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are |
| # met: redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer; |
| # redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution; |
| # neither the name of the copyright holders nor the names of its |
| # contributors may be used to endorse or promote products derived from |
| # this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| # |
| |
| import math |
| |
| from m5.util import fatal |
| from m5.params import * |
| from m5.objects import * |
| |
| from m5.defines import buildEnv |
| |
| if buildEnv["PROTOCOL"] == "CHI": |
| import ruby.CHI_config as CHI |
| |
| from topologies.BaseTopology import SimpleTopology |
| |
| |
| class CustomMesh(SimpleTopology): |
| description = "CustomMesh" |
| |
| def __init__(self, controllers): |
| self.nodes = controllers |
| |
| # -------------------------------------------------------------------------- |
| # _makeMesh |
| # -------------------------------------------------------------------------- |
| |
| def _makeMesh( |
| self, |
| IntLink, |
| link_latency, |
| num_rows, |
| num_columns, |
| cross_links, |
| cross_link_latency, |
| ): |
| |
| # East->West, West->East, North->South, South->North |
| # XY routing weights |
| link_weights = [1, 1, 2, 2] |
| |
| # East output to West input links |
| for row in range(num_rows): |
| for col in range(num_columns): |
| if col + 1 < num_columns: |
| east_out = col + (row * num_columns) |
| west_in = (col + 1) + (row * num_columns) |
| llat = ( |
| cross_link_latency |
| if (east_out, west_in) in cross_links |
| else link_latency |
| ) |
| self._int_links.append( |
| IntLink( |
| link_id=self._link_count, |
| src_node=self._routers[east_out], |
| dst_node=self._routers[west_in], |
| dst_inport="West", |
| latency=llat, |
| weight=link_weights[0], |
| ) |
| ) |
| self._link_count += 1 |
| |
| # West output to East input links |
| for row in range(num_rows): |
| for col in range(num_columns): |
| if col + 1 < num_columns: |
| east_in = col + (row * num_columns) |
| west_out = (col + 1) + (row * num_columns) |
| llat = ( |
| cross_link_latency |
| if (west_out, east_in) in cross_links |
| else link_latency |
| ) |
| self._int_links.append( |
| IntLink( |
| link_id=self._link_count, |
| src_node=self._routers[west_out], |
| dst_node=self._routers[east_in], |
| dst_inport="East", |
| latency=llat, |
| weight=link_weights[1], |
| ) |
| ) |
| self._link_count += 1 |
| |
| # North output to South input links |
| for col in range(num_columns): |
| for row in range(num_rows): |
| if row + 1 < num_rows: |
| north_out = col + (row * num_columns) |
| south_in = col + ((row + 1) * num_columns) |
| llat = ( |
| cross_link_latency |
| if (north_out, south_in) in cross_links |
| else link_latency |
| ) |
| self._int_links.append( |
| IntLink( |
| link_id=self._link_count, |
| src_node=self._routers[north_out], |
| dst_node=self._routers[south_in], |
| dst_inport="South", |
| latency=llat, |
| weight=link_weights[2], |
| ) |
| ) |
| self._link_count += 1 |
| |
| # South output to North input links |
| for col in range(num_columns): |
| for row in range(num_rows): |
| if row + 1 < num_rows: |
| north_in = col + (row * num_columns) |
| south_out = col + ((row + 1) * num_columns) |
| llat = ( |
| cross_link_latency |
| if (south_out, north_in) in cross_links |
| else link_latency |
| ) |
| self._int_links.append( |
| IntLink( |
| link_id=self._link_count, |
| src_node=self._routers[south_out], |
| dst_node=self._routers[north_in], |
| dst_inport="North", |
| latency=llat, |
| weight=link_weights[3], |
| ) |
| ) |
| self._link_count += 1 |
| |
| # -------------------------------------------------------------------------- |
| # distributeNodes |
| # -------------------------------------------------------------------------- |
| |
| def _createRNFRouter(self, mesh_router): |
| # Create a zero-latency router bridging node controllers |
| # and the mesh router |
| node_router = self._Router(router_id=len(self._routers), latency=0) |
| self._routers.append(node_router) |
| |
| # connect node_router <-> mesh router |
| self._int_links.append( |
| self._IntLink( |
| link_id=self._link_count, |
| src_node=node_router, |
| dst_node=mesh_router, |
| latency=self._router_link_latency, |
| ) |
| ) |
| self._link_count += 1 |
| |
| self._int_links.append( |
| self._IntLink( |
| link_id=self._link_count, |
| src_node=mesh_router, |
| dst_node=node_router, |
| latency=self._router_link_latency, |
| ) |
| ) |
| self._link_count += 1 |
| |
| return node_router |
| |
| def distributeNodes(self, node_placement_config, node_list): |
| if len(node_list) == 0: |
| return |
| |
| num_nodes_per_router = node_placement_config.num_nodes_per_router |
| router_idx_list = node_placement_config.router_list |
| |
| if num_nodes_per_router: |
| # evenly distribute nodes to all listed routers |
| assert len(router_idx_list) * num_nodes_per_router == len( |
| node_list |
| ) |
| |
| for idx, node in enumerate(node_list): |
| mesh_router_idx = router_idx_list[idx // num_nodes_per_router] |
| router = self._routers[mesh_router_idx] |
| |
| # Create another router bridging RNF node controllers |
| # and the mesh router |
| # for non-RNF nodes, node router is mesh router |
| if isinstance(node, CHI.CHI_RNF): |
| router = self._createRNFRouter(router) |
| |
| # connect all ctrls in the node to node_router |
| ctrls = node.getNetworkSideControllers() |
| for c in ctrls: |
| self._ext_links.append( |
| self._ExtLink( |
| link_id=self._link_count, |
| ext_node=c, |
| int_node=router, |
| latency=self._node_link_latency, |
| ) |
| ) |
| self._link_count += 1 |
| else: |
| # try to circulate all nodes to all routers, some routers may be |
| # connected to zero or more than one node. |
| idx = 0 |
| for node in node_list: |
| ridx = router_idx_list[idx] |
| router = self._routers[ridx] |
| |
| if isinstance(node, CHI.CHI_RNF): |
| router = self._createRNFRouter(router) |
| ctrls = node.getNetworkSideControllers() |
| for c in ctrls: |
| self._ext_links.append( |
| self._ExtLink( |
| link_id=self._link_count, |
| ext_node=c, |
| int_node=router, |
| latency=self._node_link_latency, |
| ) |
| ) |
| self._link_count += 1 |
| idx = (idx + 1) % len(router_idx_list) |
| |
| # -------------------------------------------------------------------------- |
| # makeTopology |
| # -------------------------------------------------------------------------- |
| |
| def makeTopology(self, options, network, IntLink, ExtLink, Router): |
| assert buildEnv["PROTOCOL"] == "CHI" |
| |
| num_rows = options.num_rows |
| num_cols = options.num_cols |
| num_mesh_routers = num_rows * num_cols |
| |
| self._IntLink = IntLink |
| self._ExtLink = ExtLink |
| self._Router = Router |
| |
| if hasattr(options, "router_link_latency"): |
| self._router_link_latency = options.router_link_latency |
| self._node_link_latency = options.node_link_latency |
| else: |
| print("WARNING: router/node link latencies not provided") |
| self._router_link_latency = options.link_latency |
| self._node_link_latency = options.link_latency |
| |
| # classify nodes into different types |
| rnf_nodes = [] |
| hnf_nodes = [] |
| mn_nodes = [] |
| mem_nodes = [] |
| io_mem_nodes = [] |
| rni_dma_nodes = [] |
| rni_io_nodes = [] |
| |
| # Notice below that all the type must be the same for all nodes with |
| # the same base type. |
| rnf_params = None |
| hnf_params = None |
| mn_params = None |
| mem_params = None |
| io_mem_params = None |
| rni_dma_params = None |
| rni_io_params = None |
| |
| def check_same(val, curr): |
| assert curr == None or curr == val |
| return val |
| |
| for n in self.nodes: |
| if isinstance(n, CHI.CHI_RNF): |
| rnf_nodes.append(n) |
| rnf_params = check_same(type(n).NoC_Params, rnf_params) |
| elif isinstance(n, CHI.CHI_HNF): |
| hnf_nodes.append(n) |
| hnf_params = check_same(type(n).NoC_Params, hnf_params) |
| elif isinstance(n, CHI.CHI_MN): |
| mn_nodes.append(n) |
| mn_params = check_same(type(n).NoC_Params, mn_params) |
| elif isinstance(n, CHI.CHI_SNF_MainMem): |
| mem_nodes.append(n) |
| mem_params = check_same(type(n).NoC_Params, mem_params) |
| elif isinstance(n, CHI.CHI_SNF_BootMem): |
| io_mem_nodes.append(n) |
| io_mem_params = check_same(type(n).NoC_Params, io_mem_params) |
| elif isinstance(n, CHI.CHI_RNI_DMA): |
| rni_dma_nodes.append(n) |
| rni_dma_params = check_same(type(n).NoC_Params, rni_dma_params) |
| elif isinstance(n, CHI.CHI_RNI_IO): |
| rni_io_nodes.append(n) |
| rni_io_params = check_same(type(n).NoC_Params, rni_io_params) |
| else: |
| fatal( |
| "topologies.CustomMesh: {} not supported".format( |
| n.__class__.__name__ |
| ) |
| ) |
| |
| # Create all mesh routers |
| self._routers = [ |
| Router(router_id=i, latency=options.router_latency) |
| for i in range(num_mesh_routers) |
| ] |
| |
| self._link_count = 0 |
| self._int_links = [] |
| self._ext_links = [] |
| |
| # Create all the mesh internal links. |
| self._makeMesh( |
| IntLink, |
| self._router_link_latency, |
| num_rows, |
| num_cols, |
| options.cross_links, |
| options.cross_link_latency, |
| ) |
| |
| # Place CHI_RNF on the mesh |
| self.distributeNodes(rnf_params, rnf_nodes) |
| |
| # Place CHI_HNF on the mesh |
| self.distributeNodes(hnf_params, hnf_nodes) |
| |
| # Place CHI_MN on the mesh |
| self.distributeNodes(mn_params, mn_nodes) |
| |
| # Place CHI_SNF_MainMem on the mesh |
| self.distributeNodes(mem_params, mem_nodes) |
| |
| # Place all IO mem nodes on the mesh |
| self.distributeNodes(io_mem_params, io_mem_nodes) |
| |
| # Place all IO request nodes on the mesh |
| self.distributeNodes(rni_dma_params, rni_dma_nodes) |
| self.distributeNodes(rni_io_params, rni_io_nodes) |
| |
| # Set up |
| network.int_links = self._int_links |
| network.ext_links = self._ext_links |
| network.routers = self._routers |
| |
| pairing = getattr(options, "pairing", None) |
| if pairing != None: |
| self._autoPairHNFandSNF(hnf_list, mem_ctrls, pairing) |
| |
| # -------------------------------------------------------------------------- |
| # _autoPair |
| # -------------------------------------------------------------------------- |
| def _autoPairHNFandSNF(self, cache_ctrls, mem_ctrls, pairing): |
| # Use the pairing defined by the configuration to reassign the |
| # memory ranges |
| pair_debug = False |
| |
| print("Pairing HNFs to SNFs") |
| print(pairing) |
| |
| all_cache = [] |
| for c in cache_ctrls: |
| all_cache.extend(c.getNetworkSideControllers()) |
| all_mem = [] |
| for c in mem_ctrls: |
| all_mem.extend(c.getNetworkSideControllers()) |
| |
| # checks and maps index from pairing map to component |
| assert len(pairing) == len(all_cache) |
| |
| def _tolist(val): |
| return val if isinstance(val, list) else [val] |
| |
| for m in all_mem: |
| m._pairing = [] |
| |
| pairing_check = max(1, len(all_mem) / len(all_cache)) |
| for cidx, c in enumerate(all_cache): |
| c._pairing = [] |
| for midx in _tolist(pairing[cidx]): |
| c._pairing.append(all_mem[midx]) |
| if c not in all_mem[midx]._pairing: |
| all_mem[midx]._pairing.append(c) |
| assert len(c._pairing) == pairing_check |
| if pair_debug: |
| print(c.path()) |
| for r in c.addr_ranges: |
| print("%s" % r) |
| for p in c._pairing: |
| print("\t" + p.path()) |
| for r in p.addr_ranges: |
| print("\t%s" % r) |
| |
| # all must be paired |
| for c in all_cache: |
| assert len(c._pairing) > 0 |
| for m in all_mem: |
| assert len(m._pairing) > 0 |
| |
| # only support a single range for the main memory controllers |
| tgt_range_start = all_mem[0].addr_ranges[0].start.value |
| for mem in all_mem: |
| for r in mem.addr_ranges: |
| if r.start.value != tgt_range_start: |
| fatal( |
| "topologies.CustomMesh: not supporting pairing of " |
| "main memory with multiple ranges" |
| ) |
| |
| # reassign ranges for a 1 -> N paring |
| def _rerange(src_cntrls, tgt_cntrls, fix_tgt_peer): |
| assert len(tgt_cntrls) >= len(src_cntrls) |
| |
| def _rangeToBit(addr_ranges): |
| bit = None |
| for r in addr_ranges: |
| if bit == None: |
| bit = r.intlvMatch |
| else: |
| assert bit == r.intlvMatch |
| return bit |
| |
| def _getPeer(cntrl): |
| return cntrl.memory_out_port.peer.simobj |
| |
| sorted_src = list(src_cntrls) |
| sorted_src.sort(key=lambda x: _rangeToBit(x.addr_ranges)) |
| |
| # paired controllers need to have seq. interleaving match values |
| intlvMatch = 0 |
| for src in sorted_src: |
| for tgt in src._pairing: |
| for r in tgt.addr_ranges: |
| r.intlvMatch = intlvMatch |
| if fix_tgt_peer: |
| _getPeer(tgt).range.intlvMatch = intlvMatch |
| intlvMatch = intlvMatch + 1 |
| |
| # recreate masks |
| for src in sorted_src: |
| for src_range in src.addr_ranges: |
| if src_range.start.value != tgt_range_start: |
| continue |
| new_src_mask = [] |
| for m in src_range.masks: |
| # TODO should mask all the way to the max range size |
| new_src_mask.append( |
| m | (m * 2) | (m * 4) | (m * 8) | (m * 16) |
| ) |
| for tgt in src._pairing: |
| paired = False |
| for tgt_range in tgt.addr_ranges: |
| if tgt_range.start.value == src_range.start.value: |
| src_range.masks = new_src_mask |
| new_tgt_mask = [] |
| lsbs = len(tgt_range.masks) - len(new_src_mask) |
| for i in range(lsbs): |
| new_tgt_mask.append(tgt_range.masks[i]) |
| for m in new_src_mask: |
| new_tgt_mask.append(m) |
| tgt_range.masks = new_tgt_mask |
| if fix_tgt_peer: |
| _getPeer(tgt).range.masks = new_tgt_mask |
| paired = True |
| if not paired: |
| fatal( |
| "topologies.CustomMesh: could not " |
| "reassign ranges {} {}".format( |
| src.path(), tgt.path() |
| ) |
| ) |
| |
| if len(all_mem) >= len(all_cache): |
| _rerange(all_cache, all_mem, True) |
| else: |
| _rerange(all_mem, all_cache, False) |
| |
| if pair_debug: |
| print("") |
| for cidx, c in enumerate(all_cache): |
| assert len(c._pairing) == pairing_check |
| print(c.path()) |
| for r in c.addr_ranges: |
| print("%s" % r) |
| for p in c._pairing: |
| print("\t" + p.path()) |
| for r in p.addr_ranges: |
| print("\t%s" % r) |
