| /* |
| * Copyright (c) 2021 The Regents of the University of California |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "dev/lupio/lupio_pic.hh" |
| |
| #include "cpu/base.hh" |
| #include "debug/LupioPIC.hh" |
| #include "mem/packet_access.hh" |
| #include "params/LupioPIC.hh" |
| #include "sim/system.hh" |
| |
| namespace gem5 |
| { |
| |
| LupioPIC::LupioPIC(const Params ¶ms) : |
| BasicPioDevice(params, params.pio_size), |
| system(params.system), |
| nSrc(params.n_src), |
| nThread(params.num_threads), |
| intType(params.int_type), |
| mask{0}, |
| enable{0} |
| { |
| // CPU0 receives all IRQ sources by default |
| enable[0] = 0xFFFFFFFF; |
| DPRINTF(LupioPIC, "LupioPIC initalized\n"); |
| } |
| |
| void |
| LupioPIC::lupioPicUpdateIRQ() |
| { |
| for (int cpu = 0; cpu < nThread; cpu++) { |
| auto tc = system->threads[cpu]; |
| |
| if (enable[cpu] & mask[cpu] & pending) { |
| tc->getCpuPtr()->postInterrupt(tc->threadId(), intType, 0); |
| } else { |
| tc->getCpuPtr()->clearInterrupt(tc->threadId(), intType, 0); |
| } |
| } |
| } |
| |
| void |
| LupioPIC::post(int src_id) |
| { |
| gem5_assert(src_id < nSrc && src_id >= 0); |
| |
| uint32_t irq_mask = 1UL << src_id; |
| pending |= irq_mask; |
| lupioPicUpdateIRQ(); |
| } |
| |
| void |
| LupioPIC::clear(int src_id) |
| { |
| gem5_assert(src_id < nSrc && src_id >= 0); |
| |
| uint32_t irq_mask = 1UL << src_id; |
| pending &= ~irq_mask; |
| lupioPicUpdateIRQ(); |
| } |
| |
| uint64_t |
| LupioPIC::lupioPicRead(uint8_t addr) |
| { |
| uint32_t r = 0; |
| |
| int cpu = addr / LUPIO_PIC_MAX; |
| int reg = addr % LUPIO_PIC_MAX; |
| |
| switch (reg) { |
| case LUPIO_PIC_PRIO: |
| // Value will be 32 if there is no unmasked pending IRQ |
| r = ctz32(pending & mask[cpu] & enable[cpu]); |
| DPRINTF(LupioPIC, "Read PIC_PRIO: %d\n", r); |
| break; |
| case LUPIO_PIC_MASK: |
| r = mask[cpu]; |
| DPRINTF(LupioPIC, "Read PIC_MASK: %d\n", r); |
| break; |
| case LUPIO_PIC_PEND: |
| r = (enable[cpu] & pending); |
| DPRINTF(LupioPIC, "Read PIC_PEND: %d\n", r); |
| break; |
| case LUPIO_PIC_ENAB: |
| r = enable[cpu]; |
| break; |
| |
| default: |
| panic("Unexpected read to the LupioPIC device at address %#llx!", |
| addr); |
| break; |
| } |
| return r; |
| } |
| |
| void |
| LupioPIC::lupioPicWrite(uint8_t addr, uint64_t val64) |
| { |
| uint32_t val = val64; |
| |
| int cpu = addr / LUPIO_PIC_MAX; |
| int reg = addr % LUPIO_PIC_MAX; |
| |
| switch (reg) { |
| case LUPIO_PIC_MASK: |
| mask[cpu] = val; |
| DPRINTF(LupioPIC, "Write PIC_MASK: %d\n", mask[cpu]); |
| lupioPicUpdateIRQ(); |
| break; |
| case LUPIO_PIC_ENAB: |
| enable[cpu] = val; |
| DPRINTF(LupioPIC, "Write PIC_ENAB: %d\n", enable[cpu]); |
| lupioPicUpdateIRQ(); |
| break; |
| |
| default: |
| panic("Unexpected write to the LupioPIC device at address %#llx!", |
| addr); |
| break; |
| } |
| } |
| |
| Tick |
| LupioPIC::read(PacketPtr pkt) |
| { |
| Addr pic_addr = pkt->getAddr() - pioAddr; |
| |
| DPRINTF(LupioPIC, |
| "Read request - addr: %#x, size: %#x\n", pic_addr, pkt->getSize()); |
| |
| uint64_t read_val = lupioPicRead(pic_addr); |
| DPRINTF(LupioPIC, "Packet Read: %#x\n", read_val); |
| pkt->setUintX(read_val, byteOrder); |
| pkt->makeResponse(); |
| |
| return pioDelay; |
| } |
| |
| Tick |
| LupioPIC::write(PacketPtr pkt) |
| { |
| Addr pic_addr = pkt->getAddr() - pioAddr; |
| |
| DPRINTF(LupioPIC, "Write register %#x value %#x\n", pic_addr, |
| pkt->getUintX(byteOrder)); |
| |
| lupioPicWrite(pic_addr, pkt->getUintX(byteOrder)); |
| DPRINTF(LupioPIC, "Packet Write Value: %d\n", pkt->getUintX(byteOrder)); |
| |
| pkt->makeResponse(); |
| |
| return pioDelay; |
| } |
| } // namespace gem5 |