blob: ca1bc7b5a2df754a002a8b26f10f48afec33ab13 [file] [log] [blame]
# -*- mode:python -*-
# Copyright (c) 2013, 2015-2020 ARM Limited
# All rights reserved.
#
# The license below extends only to copyright in the software and shall
# not be construed as granting a license to any other intellectual
# property including but not limited to intellectual property relating
# to a hardware implementation of the functionality of the software
# licensed hereunder. You may use the software subject to the license
# terms below provided that you ensure that this notice is replicated
# unmodified and in its entirety in all distributions of the software,
# modified or unmodified, in source code or in binary form.
#
# Copyright (c) 2011 Advanced Micro Devices, Inc.
# Copyright (c) 2009 The Hewlett-Packard Development Company
# Copyright (c) 2004-2005 The Regents of The University of Michigan
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
###################################################
#
# SCons top-level build description (SConstruct) file.
#
# While in this directory ('gem5'), just type 'scons' to build the default
# configuration (see below), or type 'scons build/<CONFIG>/<binary>'
# to build some other configuration (e.g., 'build/X86/gem5.opt' for
# the optimized X86 version).
#
# You can build gem5 in a different directory as long as there is a
# 'build/<CONFIG>' somewhere along the target path. The build system
# expects that all configs under the same build directory are being
# built for the same host system.
#
# Examples:
#
# The following two commands are equivalent. The '-u' option tells
# scons to search up the directory tree for this SConstruct file.
# % cd <path-to-src>/gem5 ; scons build/X86/gem5.debug
# % cd <path-to-src>/gem5/build/X86; scons -u gem5.debug
#
# The following two commands are equivalent and demonstrate building
# in a directory outside of the source tree. The '-C' option tells
# scons to chdir to the specified directory to find this SConstruct
# file.
# % cd <path-to-src>/gem5 ; scons /local/foo/build/X86/gem5.debug
# % cd /local/foo/build/X86; scons -C <path-to-src>/gem5 gem5.debug
#
# You can use 'scons -H' to print scons options. If you're in this
# 'gem5' directory (or use -u or -C to tell scons where to find this
# file), you can use 'scons -h' to print all the gem5-specific build
# options as well.
#
###################################################
# Global Python imports
import atexit
import os
import sys
from os import mkdir, environ
from os.path import abspath, dirname, expanduser
from os.path import isdir, isfile
from os.path import join, split
# SCons imports
import SCons
import SCons.Node
import SCons.Node.FS
import SCons.Tool
########################################################################
#
# Command line options.
#
########################################################################
AddOption('--no-colors', dest='use_colors', action='store_false',
help="Don't add color to abbreviated scons output")
AddOption('--with-cxx-config', action='store_true',
help="Build with support for C++-based configuration")
AddOption('--default',
help='Override which build_opts file to use for defaults')
AddOption('--ignore-style', action='store_true',
help='Disable style checking hooks')
AddOption('--gold-linker', action='store_true', help='Use the gold linker')
AddOption('--no-compress-debug', action='store_true',
help="Don't compress debug info in build files")
AddOption('--with-lto', action='store_true',
help='Enable Link-Time Optimization')
AddOption('--verbose', action='store_true',
help='Print full tool command lines')
AddOption('--without-python', action='store_true',
help='Build without Python configuration support')
AddOption('--without-tcmalloc', action='store_true',
help='Disable linking against tcmalloc')
AddOption('--with-ubsan', action='store_true',
help='Build with Undefined Behavior Sanitizer if available')
AddOption('--with-asan', action='store_true',
help='Build with Address Sanitizer if available')
AddOption('--with-systemc-tests', action='store_true',
help='Build systemc tests')
# Imports of gem5_scons happen here since it depends on some options which are
# declared above.
from gem5_scons import error, warning, summarize_warnings, parse_build_path
from gem5_scons import TempFileSpawn, EnvDefaults, MakeAction, MakeActionTool
import gem5_scons
from gem5_scons.builders import ConfigFile, AddLocalRPATH, SwitchingHeaders
from gem5_scons.util import compareVersions, readCommand
Export('MakeAction')
########################################################################
#
# Set up the main build environment.
#
########################################################################
main = Environment(tools=[
'default', 'git', TempFileSpawn, EnvDefaults, MakeActionTool,
ConfigFile, AddLocalRPATH, SwitchingHeaders
])
main.Tool(SCons.Tool.FindTool(['gcc', 'clang'], main))
main.Tool(SCons.Tool.FindTool(['g++', 'clang++'], main))
Export('main')
from gem5_scons.util import get_termcap
termcap = get_termcap()
# Check that we have a C/C++ compiler
if not ('CC' in main and 'CXX' in main):
error("No C++ compiler installed (package g++ on Ubuntu and RedHat)")
# Find default configuration & binary.
Default(environ.get('M5_DEFAULT_BINARY', 'build/ARM/gem5.debug'))
########################################################################
#
# Figure out which configurations to set up based on the path(s) of
# the target(s).
#
########################################################################
# helper function: find last occurrence of element in list
def rfind(l, elt, offs = -1):
for i in range(len(l)+offs, 0, -1):
if l[i] == elt:
return i
raise ValueError("element not found")
# Take a list of paths (or SCons Nodes) and return a list with all
# paths made absolute and ~-expanded. Paths will be interpreted
# relative to the launch directory unless a different root is provided
def makePathListAbsolute(path_list, root=GetLaunchDir()):
return [abspath(os.path.join(root, expanduser(str(p))))
for p in path_list]
# Each target must have 'build' in the interior of the path; the
# directory below this will determine the build parameters. For
# example, for target 'foo/bar/build/X86/arch/x86/blah.do' we
# recognize that X86 specifies the configuration because it
# follow 'build' in the build path.
# The funky assignment to "[:]" is needed to replace the list contents
# in place rather than reassign the symbol to a new list, which
# doesn't work (obviously!).
BUILD_TARGETS[:] = makePathListAbsolute(BUILD_TARGETS)
# Generate a list of the unique build roots and configs that the
# collected targets reference.
variant_paths = set()
build_root = None
for t in BUILD_TARGETS:
this_build_root, variant = parse_build_path(t)
# Make sure all targets use the same build root.
if not build_root:
build_root = this_build_root
elif this_build_root != build_root:
error("build targets not under same build root\n %s\n %s" %
(build_root, this_build_root))
# Collect all the variants into a set.
variant_paths.add(os.path.join('/', build_root, variant))
# Make sure build_root exists (might not if this is the first build there)
if not isdir(build_root):
mkdir(build_root)
main['BUILDROOT'] = build_root
main.SConsignFile(os.path.join(build_root, "sconsign"))
########################################################################
#
# Set up global sticky variables... these are common to an entire build
# tree (not specific to a particular build like X86)
#
########################################################################
global_vars_file = os.path.join(build_root, 'variables.global')
global_vars = Variables(global_vars_file, args=ARGUMENTS)
global_vars.AddVariables(
('CC', 'C compiler', environ.get('CC', main['CC'])),
('CXX', 'C++ compiler', environ.get('CXX', main['CXX'])),
('CCFLAGS_EXTRA', 'Extra C and C++ compiler flags', ''),
('LDFLAGS_EXTRA', 'Extra linker flags', ''),
('MARSHAL_CCFLAGS_EXTRA', 'Extra C and C++ marshal compiler flags', ''),
('MARSHAL_LDFLAGS_EXTRA', 'Extra marshal linker flags', ''),
('PYTHON_CONFIG', 'Python config binary to use',
[ 'python3-config', 'python-config']
),
('PROTOC', 'protoc tool', environ.get('PROTOC', 'protoc')),
('BATCH', 'Use batch pool for build and tests', False),
('BATCH_CMD', 'Batch pool submission command name', 'qdo'),
('M5_BUILD_CACHE', 'Cache built objects in this directory', False),
('EXTRAS', 'Add extra directories to the compilation', '')
)
# Update main environment with values from ARGUMENTS & global_vars_file
global_vars.Update(main)
Help('''
Global build variables:
{help}
'''.format(help=global_vars.GenerateHelpText(main)), append=True)
# Save sticky variable settings back to current variables file
global_vars.Save(global_vars_file, main)
########################################################################
#
# Set up various paths.
#
########################################################################
# Parse EXTRAS variable to build list of all directories where we're
# look for sources etc. This list is exported as extras_dir_list.
base_dir = Dir('#src').abspath
if main['EXTRAS']:
extras_dir_list = makePathListAbsolute(main['EXTRAS'].split(':'))
else:
extras_dir_list = []
Export('base_dir')
Export('extras_dir_list')
# the ext directory should be on the #includes path
main.Append(CPPPATH=[Dir('ext')])
# Add shared top-level headers
main.Prepend(CPPPATH=Dir('include'))
########################################################################
#
# Set command line options based on the configuration of the host and
# build settings.
#
########################################################################
# Initialize the Link-Time Optimization (LTO) flags
main['LTO_CCFLAGS'] = []
main['LTO_LDFLAGS'] = []
# According to the readme, tcmalloc works best if the compiler doesn't
# assume that we're using the builtin malloc and friends. These flags
# are compiler-specific, so we need to set them after we detect which
# compiler we're using.
main['TCMALLOC_CCFLAGS'] = []
CXX_version = readCommand([main['CXX'], '--version'], exception=False)
main['GCC'] = CXX_version and CXX_version.find('g++') >= 0
main['CLANG'] = CXX_version and CXX_version.find('clang') >= 0
if main['GCC'] + main['CLANG'] > 1:
error('Two compilers enabled at once?')
# Set up default C++ compiler flags
if main['GCC'] or main['CLANG']:
# As gcc and clang share many flags, do the common parts here
main.Append(CCFLAGS=['-pipe'])
main.Append(CCFLAGS=['-fno-strict-aliasing'])
# Enable -Wall and -Wextra and then disable the few warnings that
# we consistently violate
main.Append(CCFLAGS=['-Wall', '-Wundef', '-Wextra',
'-Wno-sign-compare', '-Wno-unused-parameter'])
# We always compile using C++17
main.Append(CXXFLAGS=['-std=c++17'])
if sys.platform.startswith('freebsd'):
main.Append(CCFLAGS=['-I/usr/local/include'])
main.Append(CXXFLAGS=['-I/usr/local/include'])
# On FreeBSD we need libthr.
main.Append(LIBS=['thr'])
with gem5_scons.Configure(main) as conf:
conf.CheckLinkFlag('-Wl,--as-needed')
if GetOption('gold_linker'):
main.Append(LINKFLAGS='-fuse-ld=gold')
# Treat warnings as errors but white list some warnings that we
# want to allow (e.g., deprecation warnings).
main.Append(CCFLAGS=['-Werror',
'-Wno-error=deprecated-declarations',
'-Wno-error=deprecated',
])
else:
error('\n'.join((
"Don't know what compiler options to use for your compiler.",
"compiler: " + main['CXX'],
"version: " + CXX_version.replace('\n', '<nl>') if
CXX_version else 'COMMAND NOT FOUND!',
"If you're trying to use a compiler other than GCC",
"or clang, there appears to be something wrong with your",
"environment.",
"",
"If you are trying to use a compiler other than those listed",
"above you will need to ease fix SConstruct and ",
"src/SConscript to support that compiler.")))
if main['GCC']:
if compareVersions(main['CXXVERSION'], "5") < 0:
error('gcc version 5 or newer required.\n'
'Installed version:', main['CXXVERSION'])
# Add the appropriate Link-Time Optimization (LTO) flags if `--with-lto` is
# set.
if GetOption('with_lto'):
# g++ uses "make" to parallelize LTO. The program can be overriden with
# the environment variable "MAKE", but we currently make no attempt to
# plumb that variable through.
parallelism = ''
if main.Detect('make'):
parallelism = '=%d' % GetOption('num_jobs')
else:
warning('"make" not found, link time optimization will be '
'single threaded.')
for var in 'LTO_CCFLAGS', 'LTO_LDFLAGS':
# Use the same amount of jobs for LTO as we are running scons with.
main[var] = ['-flto%s' % parallelism]
main.Append(TCMALLOC_CCFLAGS=['-fno-builtin-malloc', '-fno-builtin-calloc',
'-fno-builtin-realloc', '-fno-builtin-free'])
elif main['CLANG']:
if compareVersions(main['CXXVERSION'], "6") < 0:
error('clang version 6 or newer required.\n'
'Installed version:', main['CXXVERSION'])
# Set the Link-Time Optimization (LTO) flags if enabled.
if GetOption('with_lto'):
for var in 'LTO_CCFLAGS', 'LTO_LDFLAGS':
main[var] = ['-flto']
# clang has a few additional warnings that we disable.
with gem5_scons.Configure(main) as conf:
conf.CheckCxxFlag('-Wno-c99-designator')
conf.CheckCxxFlag('-Wno-defaulted-function-deleted')
main.Append(TCMALLOC_CCFLAGS=['-fno-builtin'])
# On Mac OS X/Darwin we need to also use libc++ (part of XCode) as
# opposed to libstdc++, as the later is dated.
if sys.platform == "darwin":
main.Append(CXXFLAGS=['-stdlib=libc++'])
main.Append(LIBS=['c++'])
# Add sanitizers flags
sanitizers=[]
if GetOption('with_ubsan'):
sanitizers.append('undefined')
if GetOption('with_asan'):
# Available for gcc >= 5 or llvm >= 3.1 both a requirement
# by the build system
sanitizers.append('address')
suppressions_file = Dir('util').File('lsan-suppressions').get_abspath()
suppressions_opt = 'suppressions=%s' % suppressions_file
main['ENV']['LSAN_OPTIONS'] = ':'.join([suppressions_opt,
'print_suppressions=0'])
print()
warning('To suppress false positive leaks, set the LSAN_OPTIONS '
'environment variable to "%s" when running gem5' %
suppressions_opt)
warning('LSAN_OPTIONS=suppressions=%s' % suppressions_opt)
print()
if sanitizers:
sanitizers = ','.join(sanitizers)
if main['GCC'] or main['CLANG']:
main.Append(CCFLAGS=['-fsanitize=%s' % sanitizers,
'-fno-omit-frame-pointer'],
LINKFLAGS='-fsanitize=%s' % sanitizers)
else:
warning("Don't know how to enable %s sanitizer(s) for your "
"compiler." % sanitizers)
# Do this after we save setting back, or else we'll tack on an
# extra 'qdo' every time we run scons.
if main['BATCH']:
main['CC'] = main['BATCH_CMD'] + ' ' + main['CC']
main['CXX'] = main['BATCH_CMD'] + ' ' + main['CXX']
main['AS'] = main['BATCH_CMD'] + ' ' + main['AS']
main['AR'] = main['BATCH_CMD'] + ' ' + main['AR']
main['RANLIB'] = main['BATCH_CMD'] + ' ' + main['RANLIB']
if sys.platform == 'cygwin':
# cygwin has some header file issues...
main.Append(CCFLAGS=["-Wno-uninitialized"])
# Cache build files in the supplied directory.
if main['M5_BUILD_CACHE']:
print('Using build cache located at', main['M5_BUILD_CACHE'])
CacheDir(main['M5_BUILD_CACHE'])
if not GetOption('no_compress_debug'):
with gem5_scons.Configure(main) as conf:
if not conf.CheckCxxFlag('-gz'):
warning("Can't enable object file debug section compression")
if not conf.CheckLinkFlag('-gz'):
warning("Can't enable executable debug section compression")
########################################################################
#
# Detect and configure external dependencies.
#
########################################################################
main['USE_PYTHON'] = not GetOption('without_python')
if main['USE_PYTHON']:
# Find Python include and library directories for embedding the
# interpreter. We rely on python-config to resolve the appropriate
# includes and linker flags. If you want to link in an alternate version
# of python, override the PYTHON_CONFIG variable.
python_config = main.Detect(main['PYTHON_CONFIG'])
if python_config is None:
error("Can't find a suitable python-config, tried %s" % \
main['PYTHON_CONFIG'])
print("Info: Using Python config: %s" % python_config)
cmd = [python_config, '--ldflags', '--includes']
# Starting in Python 3.8 the --embed flag is required. Use it if supported.
with gem5_scons.Configure(main) as conf:
if conf.TryAction('@%s --embed' % python_config)[0]:
cmd.append('--embed')
def flag_filter(env, cmd_output):
flags = cmd_output.split()
prefixes = ('-l', '-L', '-I')
is_useful = lambda x: any(x.startswith(prefix) for prefix in prefixes)
useful_flags = list(filter(is_useful, flags))
env.MergeFlags(' '.join(useful_flags))
main.ParseConfig(cmd, flag_filter)
main.Prepend(CPPPATH=Dir('ext/pybind11/include/'))
with gem5_scons.Configure(main) as conf:
# verify that this stuff works
if not conf.CheckHeader('Python.h', '<>'):
error("Check failed for Python.h header.\n",
"Two possible reasons:\n"
"1. Python headers are not installed (You can install the "
"package python-dev on Ubuntu and RedHat)\n"
"2. SCons is using a wrong C compiler. This can happen if "
"CC has the wrong value.\n"
"CC = %s" % main['CC'])
py_version = conf.CheckPythonLib()
if not py_version:
error("Can't find a working Python installation")
marshal_env = main.Clone()
# Bare minimum environment that only includes python
marshal_env.Append(CCFLAGS='$MARSHAL_CCFLAGS_EXTRA')
marshal_env.Append(LINKFLAGS='$MARSHAL_LDFLAGS_EXTRA')
# Found a working Python installation. Check if it meets minimum
# requirements.
ver_string = '.'.join(map(str, py_version))
if py_version[0] < 3 or (py_version[0] == 3 and py_version[1] < 6):
error('Embedded python library 3.6 or newer required, found %s.' %
ver_string)
elif py_version[0] > 3:
warning('Embedded python library too new. '
'Python 3 expected, found %s.' % ver_string)
main['HAVE_PKG_CONFIG'] = main.Detect('pkg-config')
with gem5_scons.Configure(main) as conf:
# On Solaris you need to use libsocket for socket ops
if not conf.CheckLibWithHeader(
[None, 'socket'], 'sys/socket.h', 'C++', 'accept(0,0,0);'):
error("Can't find library with socket calls (e.g. accept()).")
if not conf.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'):
error('Did not find needed zlib compression library '
'and/or zlib.h header file.\n'
'Please install zlib and try again.')
if not GetOption('without_tcmalloc'):
with gem5_scons.Configure(main) as conf:
if conf.CheckLib('tcmalloc'):
conf.env.Append(CCFLAGS=conf.env['TCMALLOC_CCFLAGS'])
elif conf.CheckLib('tcmalloc_minimal'):
conf.env.Append(CCFLAGS=conf.env['TCMALLOC_CCFLAGS'])
else:
warning("You can get a 12% performance improvement by "
"installing tcmalloc (libgoogle-perftools-dev package "
"on Ubuntu or RedHat).")
########################################################################
#
# Read and process SConsopts files. These can add new settings which
# affect each variant directory independently.
#
########################################################################
# Register a callback which is called after all SConsopts files have been read.
after_sconsopts_callbacks = []
def AfterSConsopts(cb):
after_sconsopts_callbacks.append(cb)
Export('AfterSConsopts')
# Sticky variables get saved in the variables file so they persist from
# one invocation to the next (unless overridden, in which case the new
# value becomes sticky).
sticky_vars = Variables(args=ARGUMENTS)
Export('sticky_vars')
# Sticky variables that should be exported to #defines in config/*.hh
# (see src/SConscript).
export_vars = []
Export('export_vars')
# Walk the tree and execute all SConsopts scripts that wil add to the
# above variables
if GetOption('verbose'):
print("Reading SConsopts")
for bdir in [ base_dir ] + extras_dir_list:
if not isdir(bdir):
error("Directory '%s' does not exist." % bdir)
for root, dirs, files in os.walk(bdir):
if 'SConsopts' in files:
if GetOption('verbose'):
print("Reading", os.path.join(root, 'SConsopts'))
SConscript(os.path.join(root, 'SConsopts'))
# Call any callbacks which the SConsopts files registered.
for cb in after_sconsopts_callbacks:
cb()
# Add any generic sticky variables here.
sticky_vars.Add(BoolVariable('USE_EFENCE',
'Link with Electric Fence malloc debugger', False))
########################################################################
#
# Find and process all the SConscript files in ext. These are shared by
# all variants in a build root.
#
########################################################################
ext_dir = Dir('#ext').abspath
ext_build_dirs = []
for root, dirs, files in os.walk(ext_dir):
if 'SConscript' in files:
build_dir = os.path.relpath(root, ext_dir)
ext_build_dirs.append(build_dir)
main.SConscript(os.path.join(root, 'SConscript'),
variant_dir=os.path.join(build_root, build_dir))
gdb_xml_dir = os.path.join(ext_dir, 'gdb-xml')
Export('gdb_xml_dir')
########################################################################
#
# Define build environments for required variants.
#
########################################################################
for variant_path in variant_paths:
if not GetOption('silent'):
print("Building in", variant_path)
# Make a copy of the build-root environment to use for this config.
env = main.Clone()
env['BUILDDIR'] = variant_path
# variant_dir is the tail component of build path, and is used to
# determine the build parameters (e.g., 'X86')
(build_root, variant_dir) = os.path.split(variant_path)
# Set env variables according to the build directory config.
sticky_vars.files = []
# Variables for $BUILD_ROOT/$VARIANT_DIR are stored in
# $BUILD_ROOT/variables/$VARIANT_DIR so you can nuke
# $BUILD_ROOT/$VARIANT_DIR without losing your variables settings.
current_vars_file = os.path.join(build_root, 'variables', variant_dir)
if isfile(current_vars_file):
sticky_vars.files.append(current_vars_file)
if not GetOption('silent'):
print("Using saved variables file %s" % current_vars_file)
elif variant_dir in ext_build_dirs:
# Things in ext are built without a variant directory.
continue
else:
# Variant specific variables file doesn't exist.
# Make sure the directory is there so we can create the file later.
opt_dir = dirname(current_vars_file)
if not isdir(opt_dir):
mkdir(opt_dir)
# Get default build variables from source tree. Variables are
# normally determined by name of $VARIANT_DIR, but can be
# overridden by '--default=' arg on command line.
default = GetOption('default')
opts_dir = Dir('#build_opts').abspath
if default:
default_vars_files = [
os.path.join(build_root, 'variables', default),
os.path.join(opts_dir, default)
]
else:
default_vars_files = [os.path.join(opts_dir, variant_dir)]
existing_files = list(filter(isfile, default_vars_files))
if existing_files:
default_vars_file = existing_files[0]
sticky_vars.files.append(default_vars_file)
print("Variables file %s not found,\n using defaults in %s"
% (current_vars_file, default_vars_file))
else:
error("Cannot find variables file %s or default file(s) %s"
% (current_vars_file, ' or '.join(default_vars_files)))
Exit(1)
# Apply current variable settings to env
sticky_vars.Update(env)
Help('''
Build variables for {dir}:
{help}
'''.format(dir=variant_dir, help=sticky_vars.GenerateHelpText(env)),
append=True)
# Process variable settings.
if env['USE_EFENCE']:
env.Append(LIBS=['efence'])
if env['KVM_ISA'] != env['TARGET_ISA']:
env['USE_KVM'] = False
# Save sticky variable settings back to current variables file
sticky_vars.Save(current_vars_file, env)
env.Append(CCFLAGS='$CCFLAGS_EXTRA')
env.Append(LINKFLAGS='$LDFLAGS_EXTRA')
exports=['env']
if main['USE_PYTHON']:
exports.append('marshal_env')
# The src/SConscript file sets up the build rules in 'env' according
# to the configured variables. It returns a list of environments,
# one for each variant build (debug, opt, etc.)
SConscript('src/SConscript', variant_dir=variant_path, exports=exports)
atexit.register(summarize_warnings)