system/arm/bootloader/arm64/boot.S - public/gem5 - Git at Google

 /*
  * Copyright (c) 2012, 2020 ARM Limited
  * All rights reserved
  *
  * The license below extends only to copyright in the software and shall
  * not be construed as granting a license to any other intellectual
  * property including but not limited to intellectual property relating
  * to a hardware implementation of the functionality of the software
  * licensed hereunder.  You may use the software subject to the license
  * terms below provided that you ensure that this notice is replicated
  * unmodified and in its entirety in all distributions of the software,
  * modified or unmodified, in source code or in binary form.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are
  * met: redistributions of source code must retain the above copyright
  * notice, this list of conditions and the following disclaimer;
  * redistributions in binary form must reproduce the above copyright
  * notice, this list of conditions and the following disclaimer in the
  * documentation and/or other materials provided with the distribution;
  * neither the name of the copyright holders nor the names of its
  * contributors may be used to endorse or promote products derived from
  * this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  */

         .text

         .globl	_start
 _start:
         /* Save some values initialized by gem5. */
         /* DTB address. */
         mov x21, x0
         /* Kernel entry point. */
         mov x20, x3
         /* cpu-release-addr. */
         mov x22, x5

         /*
          * EL3 initialisation
          */
         mrs	x0, CurrentEL
         cmp	x0, #0xc			// EL3?
         b.ne	start_ns			// skip EL3 initialisation

         mov	x0, #0x30			// RES1
         orr	x0, x0, #(1 << 0)		// Non-secure EL1
         orr	x0, x0, #(1 << 8)		// HVC enable
         orr	x0, x0, #(1 << 10)		// 64-bit EL2
         msr	scr_el3, x0

         msr	cptr_el3, xzr			// Disable copro. traps to EL3

         /*
          * Check for the primary CPU to avoid a race on the distributor
          * registers.
          */
         mrs	x0, mpidr_el1
         // ARM MPIDR_EL1 bytes: Aff3 (AArch64), Stuff, Aff2, Aff1, Aff0
         // Test the the MPIDR_EL1 register against 0xff00ffffff to
         // extract the primary CPU.
         ldr x1, =0xff00ffffff
 #ifdef GICV3
         and	x2, x0, #0xff // use Aff0 as cpuid for now...
         tst	x0, x1 // check for cpuid==zero
         b.ne	1f // secondary CPU

         ldr	x1, =GIC_DIST_BASE // GICD_CTLR
         mov	w0, #7 // EnableGrp0 | EnableGrp1NS | EnableGrp1S
         str	w0, [x1]


 1:      ldr	x1, =GIC_REDIST_BASE + 0x10000 + 0x80 // GICR_IGROUPR0
         // 128K for each redistributor, 256K strided...
         mov	x3, #1 << 18 // GICv4
         mul	x3, x3, x2
         add	x1, x1, x3
         mov	w0, #~0 // Grp1 interrupts
         str	w0, [x1], #4
         b.ne	2f // Only local interrupts for secondary CPUs
         ldr	x1, =GIC_DIST_BASE + 0x84 // GICD_IGROUPR
         str	w0, [x1], #4
         str	w0, [x1], #4
         str	w0, [x1], #4

         /* SRE & Disable IRQ/FIQ Bypass & Allow EL2 access to ICC_SRE_EL2 */
 2:      mrs	x10, S3_6_C12_C12_5 // read ICC_SRE_EL3
         orr	x10, x10, #0xf      // enable 0xf
         msr	S3_6_C12_C12_5, x10 // write ICC_SRE_EL3
         isb

         mov	x0, #1
         msr	S3_0_c12_c12_6, x0 // ICC_IGRPEN0_EL1 Enable
         msr	S3_0_C12_C12_7, x0 // ICC_IGRPEN1_EL1 Enable
 #else
         tst x0, x1                    // check for cpuid==zero
         b.ne	1f				      // secondary CPU

         ldr	x1, =GIC_DIST_BASE		// GICD_CTLR
         mov	w0, #3				// EnableGrp0 | EnableGrp1
         str	w0, [x1]

 1:	ldr	x1, =GIC_DIST_BASE + 0x80	// GICD_IGROUPR
         mov	w0, #~0				// Grp1 interrupts
         str	w0, [x1], #4
         b.ne	2f				// Only local interrupts for secondary CPUs
         str	w0, [x1], #4
         str	w0, [x1], #4

 2:	ldr	x1, =GIC_CPU_BASE		// GICC_CTLR
         ldr	w0, [x1]
         mov	w0, #3				// EnableGrp0 | EnableGrp1
         str	w0, [x1]

         mov	w0, #1 << 7			// allow NS access to GICC_PMR
         str	w0, [x1, #4]			// GICC_PMR
 #endif

         msr	sctlr_el2, xzr

         /*
          * Prepare the switch to the EL2_SP1 mode from EL3
          */
         ldr	x0, =start_ns			// Return after mode switch
         mov	x1, #0x3c9			// EL2_SP1 | D | A | I | F
         msr	elr_el3, x0
         msr	spsr_el3, x1
         eret

 start_ns:
         /*
          * Kernel parameters
          */
         mov	x0, xzr
         mov	x1, xzr
         mov	x2, xzr
         mov	x3, xzr

         mrs	x4, mpidr_el1
         // ARM MPIDR_EL1 bytes: Aff3 (AArch64), Stuff, Aff2, Aff1, Aff0
         // Test the the MPIDR_EL1 register against 0xff00ffffff to
         // extract the primary CPU.
         ldr x1, =0xff00ffffff
         tst x4, x1                    // check for cpuid==zero
         mov x1, xzr                   // load previous 'xzr' value back to x1
         b.eq	2f				      // secondary CPU

         /*
          * Secondary CPUs
          */
 1:	wfe
         /* The Linux kernel v5.8 and older writes the entry point address
          * of the secondary CPUs to this address, and does a SEV, waking up
          * the secondary CPUs.
          *
          * gem5 informs the kernel the desired address via cpu-release-addr
          * of the DTB.
          *
          * When this is first reached immediately after the bootloader starts,
          * the value at that address must be 0, which is the default memory
          * value set by gem5 for otherwise uninitialized memory, leading to
          * WFE.
          */
         ldr x4, [x22]
         cbz	x4, 1b
         br	x4				// branch to the given address

 2:
         /*
          * UART initialisation (38400 8N1)
          */
         ldr	x4, =UART_BASE			// UART base
         mov	w5, #0x10			// ibrd
         str	w5, [x4, #0x24]
         mov	w5, #0xc300
         orr	w5, w5, #0x0001			// cr
         str	w5, [x4, #0x30]

         /*
          * CLCD output site MB
          */
         ldr	x4, =SYSREGS_BASE
         ldr	w5, =(1 << 31) | (1 << 30) | (7 << 20) | (0 << 16)	// START|WRITE|MUXFPGA|SITE_MB
         str	wzr, [x4, #0xa0]		// V2M_SYS_CFGDATA
         str	w5, [x4, #0xa4]			// V2M_SYS_CFGCTRL

         /*
          * Primary CPU
          */
         // The kernel boot protocol specifies that the DTB address is placed
         // in x0.
         // https://github.com/torvalds/linux/blob/v5.7/Documentation/arm64/
         // booting.rst#4-call-the-kernel-image
         mov x0, x21
         // Jump into the kernel entry point.
         br x20

         .ltorg

         .org	0x200
	/*
	* Copyright (c) 2012, 2020 ARM Limited
	* All rights reserved
	*
	* The license below extends only to copyright in the software and shall
	* not be construed as granting a license to any other intellectual
	* property including but not limited to intellectual property relating
	* to a hardware implementation of the functionality of the software
	* licensed hereunder. You may use the software subject to the license
	* terms below provided that you ensure that this notice is replicated
	* unmodified and in its entirety in all distributions of the software,
	* modified or unmodified, in source code or in binary form.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are
	* met: redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer;
	* redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution;
	* neither the name of the copyright holders nor the names of its
	* contributors may be used to endorse or promote products derived from
	* this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*
	*/

	.text

	.globl _start
	_start:
	/* Save some values initialized by gem5. */
	/* DTB address. */
	mov x21, x0
	/* Kernel entry point. */
	mov x20, x3
	/* cpu-release-addr. */
	mov x22, x5

	/*
	* EL3 initialisation
	*/
	mrs x0, CurrentEL
	cmp x0, #0xc // EL3?
	b.ne start_ns // skip EL3 initialisation

	mov x0, #0x30 // RES1
	orr x0, x0, #(1 << 0) // Non-secure EL1
	orr x0, x0, #(1 << 8) // HVC enable
	orr x0, x0, #(1 << 10) // 64-bit EL2
	msr scr_el3, x0

	msr cptr_el3, xzr // Disable copro. traps to EL3

	/*
	* Check for the primary CPU to avoid a race on the distributor
	* registers.
	*/
	mrs x0, mpidr_el1
	// ARM MPIDR_EL1 bytes: Aff3 (AArch64), Stuff, Aff2, Aff1, Aff0
	// Test the the MPIDR_EL1 register against 0xff00ffffff to
	// extract the primary CPU.
	ldr x1, =0xff00ffffff
	#ifdef GICV3
	and x2, x0, #0xff // use Aff0 as cpuid for now...
	tst x0, x1 // check for cpuid==zero
	b.ne 1f // secondary CPU

	ldr x1, =GIC_DIST_BASE // GICD_CTLR
	mov w0, #7 // EnableGrp0 \| EnableGrp1NS \| EnableGrp1S
	str w0, [x1]


	1: ldr x1, =GIC_REDIST_BASE + 0x10000 + 0x80 // GICR_IGROUPR0
	// 128K for each redistributor, 256K strided...
	mov x3, #1 << 18 // GICv4
	mul x3, x3, x2
	add x1, x1, x3
	mov w0, #~0 // Grp1 interrupts
	str w0, [x1], #4
	b.ne 2f // Only local interrupts for secondary CPUs
	ldr x1, =GIC_DIST_BASE + 0x84 // GICD_IGROUPR
	str w0, [x1], #4
	str w0, [x1], #4
	str w0, [x1], #4

	/* SRE & Disable IRQ/FIQ Bypass & Allow EL2 access to ICC_SRE_EL2 */
	2: mrs x10, S3_6_C12_C12_5 // read ICC_SRE_EL3
	orr x10, x10, #0xf // enable 0xf
	msr S3_6_C12_C12_5, x10 // write ICC_SRE_EL3
	isb

	mov x0, #1
	msr S3_0_c12_c12_6, x0 // ICC_IGRPEN0_EL1 Enable
	msr S3_0_C12_C12_7, x0 // ICC_IGRPEN1_EL1 Enable
	#else
	tst x0, x1 // check for cpuid==zero
	b.ne 1f // secondary CPU

	ldr x1, =GIC_DIST_BASE // GICD_CTLR
	mov w0, #3 // EnableGrp0 \| EnableGrp1
	str w0, [x1]

	1: ldr x1, =GIC_DIST_BASE + 0x80 // GICD_IGROUPR
	mov w0, #~0 // Grp1 interrupts
	str w0, [x1], #4
	b.ne 2f // Only local interrupts for secondary CPUs
	str w0, [x1], #4
	str w0, [x1], #4

	2: ldr x1, =GIC_CPU_BASE // GICC_CTLR
	ldr w0, [x1]
	mov w0, #3 // EnableGrp0 \| EnableGrp1
	str w0, [x1]

	mov w0, #1 << 7 // allow NS access to GICC_PMR
	str w0, [x1, #4] // GICC_PMR
	#endif

	msr sctlr_el2, xzr

	/*
	* Prepare the switch to the EL2_SP1 mode from EL3
	*/
	ldr x0, =start_ns // Return after mode switch
	mov x1, #0x3c9 // EL2_SP1 \| D \| A \| I \| F
	msr elr_el3, x0
	msr spsr_el3, x1
	eret

	start_ns:
	/*
	* Kernel parameters
	*/
	mov x0, xzr
	mov x1, xzr
	mov x2, xzr
	mov x3, xzr

	mrs x4, mpidr_el1
	// ARM MPIDR_EL1 bytes: Aff3 (AArch64), Stuff, Aff2, Aff1, Aff0
	// Test the the MPIDR_EL1 register against 0xff00ffffff to
	// extract the primary CPU.
	ldr x1, =0xff00ffffff
	tst x4, x1 // check for cpuid==zero
	mov x1, xzr // load previous 'xzr' value back to x1
	b.eq 2f // secondary CPU

	/*
	* Secondary CPUs
	*/
	1: wfe
	/* The Linux kernel v5.8 and older writes the entry point address
	* of the secondary CPUs to this address, and does a SEV, waking up
	* the secondary CPUs.
	*
	* gem5 informs the kernel the desired address via cpu-release-addr
	* of the DTB.
	*
	* When this is first reached immediately after the bootloader starts,
	* the value at that address must be 0, which is the default memory
	* value set by gem5 for otherwise uninitialized memory, leading to
	* WFE.
	*/
	ldr x4, [x22]
	cbz x4, 1b
	br x4 // branch to the given address

	2:
	/*
	* UART initialisation (38400 8N1)
	*/
	ldr x4, =UART_BASE // UART base
	mov w5, #0x10 // ibrd
	str w5, [x4, #0x24]
	mov w5, #0xc300
	orr w5, w5, #0x0001 // cr
	str w5, [x4, #0x30]

	/*
	* CLCD output site MB
	*/
	ldr x4, =SYSREGS_BASE
	ldr w5, =(1 << 31) \| (1 << 30) \| (7 << 20) \| (0 << 16) // START\|WRITE\|MUXFPGA\|SITE_MB
	str wzr, [x4, #0xa0] // V2M_SYS_CFGDATA
	str w5, [x4, #0xa4] // V2M_SYS_CFGCTRL

	/*
	* Primary CPU
	*/
	// The kernel boot protocol specifies that the DTB address is placed
	// in x0.
	// https://github.com/torvalds/linux/blob/v5.7/Documentation/arm64/
	// booting.rst#4-call-the-kernel-image
	mov x0, x21
	// Jump into the kernel entry point.
	br x20

	.ltorg

	.org 0x200