| /* |
| * Copyright (c) 2020 ARM Limited |
| * All rights reserved |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Copyright 2020 Google, Inc. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #pragma GCC diagnostic push |
| |
| // __GNUC__ defined for both clang and gcc |
| // -Wdeprecated-copy has been added in clang10.0.0 and gcc9.0 |
| #if defined(__GNUC__) |
| # if (defined(__clang__) && __GNUC__ >= 10) || \ |
| (!defined(__clang__) && __GNUC__ >= 9) |
| # pragma GCC diagnostic ignored "-Wdeprecated-copy" |
| # endif |
| #endif |
| |
| #include <gmock/gmock.h> |
| #include <gtest/gtest.h> |
| |
| #pragma GCC diagnostic pop |
| |
| #include <vector> |
| |
| #include "dev/reg_bank.hh" |
| |
| using namespace gem5; |
| |
| // Compare the elements of an array against expected values. |
| using testing::ElementsAre; |
| // This version is needed with enough elements, empirically more than 10. |
| using testing::ElementsAreArray; |
| |
| |
| /* |
| * The RegisterRaz (read as zero) type. |
| */ |
| |
| class RegisterRazTest : public testing::Test |
| { |
| protected: |
| static constexpr size_t BufSize = 12; |
| static constexpr size_t BufOffset = 4; |
| static constexpr size_t RazSize = 4; |
| |
| std::array<uint8_t, BufSize> buf; |
| RegisterBankLE::RegisterRaz raz; |
| |
| RegisterRazTest() : raz("raz", RazSize) |
| { |
| buf.fill(0xff); |
| } |
| }; |
| // Needed by C++14 and lower |
| constexpr size_t RegisterRazTest::RazSize; |
| |
| TEST_F(RegisterRazTest, Name) |
| { |
| EXPECT_EQ(raz.name(), "raz"); |
| } |
| |
| TEST_F(RegisterRazTest, Size) |
| { |
| EXPECT_EQ(raz.size(), RazSize); |
| } |
| |
| // Accessing the entire register at once. |
| TEST_F(RegisterRazTest, FullAccess) |
| { |
| raz.write(buf.data() + BufOffset); |
| raz.read(buf.data() + BufOffset); |
| EXPECT_THAT(buf, ElementsAreArray({0xff, 0xff, 0xff, 0xff, |
| 0x00, 0x00, 0x00, 0x00, |
| 0xff, 0xff, 0xff, 0xff})); |
| } |
| |
| // Partial access, excluding the start of the register. |
| TEST_F(RegisterRazTest, PartialAccessHigh) |
| { |
| raz.write(buf.data() + BufOffset, 1, 3); |
| raz.read(buf.data() + BufOffset, 1, 3); |
| EXPECT_THAT(buf, ElementsAreArray({0xff, 0xff, 0xff, 0xff, |
| 0x00, 0x00, 0x00, 0xff, |
| 0xff, 0xff, 0xff, 0xff})); |
| } |
| |
| // Partial access, excluding the end of the register. |
| TEST_F(RegisterRazTest, PartialAccessLow) |
| { |
| raz.write(buf.data() + BufOffset, 0, 3); |
| raz.read(buf.data() + BufOffset, 0, 3); |
| EXPECT_THAT(buf, ElementsAreArray({0xff, 0xff, 0xff, 0xff, |
| 0x00, 0x00, 0x00, 0xff, |
| 0xff, 0xff, 0xff, 0xff})); |
| } |
| |
| // Partial access, excluding both ends of the register. |
| TEST_F(RegisterRazTest, PartialAccessMid) |
| { |
| raz.write(buf.data() + BufOffset, 1, 2); |
| raz.read(buf.data() + BufOffset, 1, 2); |
| EXPECT_THAT(buf, ElementsAreArray({0xff, 0xff, 0xff, 0xff, |
| 0x00, 0x00, 0xff, 0xff, |
| 0xff, 0xff, 0xff, 0xff})); |
| } |
| |
| TEST_F(RegisterRazTest, Serialize) |
| { |
| std::ostringstream os; |
| raz.serialize(os); |
| EXPECT_EQ(os.str(), ""); |
| } |
| |
| TEST_F(RegisterRazTest, Unserialize) |
| { |
| std::string s; |
| EXPECT_TRUE(raz.unserialize(s)); |
| } |
| |
| |
| /* |
| * The RegisterRao (read as one) type. |
| */ |
| |
| class RegisterRaoTest : public testing::Test |
| { |
| protected: |
| static constexpr size_t BufSize = 12; |
| static constexpr size_t BufOffset = 4; |
| static constexpr size_t RaoSize = 4; |
| |
| std::array<uint8_t, BufSize> buf; |
| RegisterBankLE::RegisterRao rao; |
| |
| RegisterRaoTest() : rao("rao", RaoSize) |
| { |
| buf.fill(0x00); |
| } |
| }; |
| // Needed by C++14 and lower |
| constexpr size_t RegisterRaoTest::RaoSize; |
| |
| TEST_F(RegisterRaoTest, Name) |
| { |
| EXPECT_EQ(rao.name(), "rao"); |
| } |
| |
| TEST_F(RegisterRaoTest, Size) |
| { |
| EXPECT_EQ(rao.size(), RaoSize); |
| } |
| |
| // Accessing the entire register at once. |
| TEST_F(RegisterRaoTest, FullAccess) |
| { |
| rao.write(buf.data() + BufOffset); |
| rao.read(buf.data() + BufOffset); |
| EXPECT_THAT(buf, ElementsAreArray({0x00, 0x00, 0x00, 0x00, |
| 0xff, 0xff, 0xff, 0xff, |
| 0x00, 0x00, 0x00, 0x00})); |
| } |
| |
| // Partial access, excluding the start of the register. |
| TEST_F(RegisterRaoTest, PartialAccessHigh) |
| { |
| rao.write(buf.data() + BufOffset, 1, 3); |
| rao.read(buf.data() + BufOffset, 1, 3); |
| EXPECT_THAT(buf, ElementsAreArray({0x00, 0x00, 0x00, 0x00, |
| 0xff, 0xff, 0xff, 0x00, |
| 0x00, 0x00, 0x00, 0x00})); |
| } |
| |
| // Partial access, excluding the end of the register. |
| TEST_F(RegisterRaoTest, PartialAccessLow) |
| { |
| rao.write(buf.data() + BufOffset, 0, 3); |
| rao.read(buf.data() + BufOffset, 0, 3); |
| EXPECT_THAT(buf, ElementsAreArray({0x00, 0x00, 0x00, 0x00, |
| 0xff, 0xff, 0xff, 0x00, |
| 0x00, 0x00, 0x00, 0x00})); |
| } |
| |
| // Partial access, excluding both ends of the register. |
| TEST_F(RegisterRaoTest, PartialAccessMid) |
| { |
| rao.write(buf.data() + BufOffset, 1, 2); |
| rao.read(buf.data() + BufOffset, 1, 2); |
| EXPECT_THAT(buf, ElementsAreArray({0x00, 0x00, 0x00, 0x00, |
| 0xff, 0xff, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00})); |
| } |
| |
| TEST_F(RegisterRaoTest, Serialize) |
| { |
| std::ostringstream os; |
| rao.serialize(os); |
| EXPECT_EQ(os.str(), ""); |
| } |
| |
| TEST_F(RegisterRaoTest, Unserialize) |
| { |
| std::string s; |
| EXPECT_TRUE(rao.unserialize(s)); |
| } |
| |
| |
| /* |
| * The RegisterBuf type. |
| */ |
| |
| class RegisterBufTest : public testing::Test |
| { |
| protected: |
| static constexpr size_t RegSize = 4; |
| |
| std::array<uint8_t, RegSize * 3> buf; |
| std::array<uint8_t, RegSize * 3> backing; |
| |
| RegisterBankLE::RegisterBuf reg; |
| |
| public: |
| RegisterBufTest() |
| : buf{0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x8, 0x9, 0xa, 0xb, 0xc}, |
| backing{0x10, 0x20, 0x30, 0x40, 0x50, 0x60, |
| 0x70, 0x80, 0x90, 0xa0, 0xb0, 0xc0}, |
| reg("buf_reg", backing.data() + RegSize, RegSize) |
| {} |
| }; |
| // Needed by C++14 and lower |
| constexpr size_t RegisterBufTest::RegSize; |
| |
| TEST_F(RegisterBufTest, Name) |
| { |
| EXPECT_EQ(reg.name(), "buf_reg"); |
| } |
| |
| TEST_F(RegisterBufTest, Size) |
| { |
| EXPECT_EQ(reg.size(), RegSize); |
| } |
| |
| // Read the entire register. |
| TEST_F(RegisterBufTest, FullRead) |
| { |
| reg.read(buf.data() + RegSize); |
| EXPECT_THAT(buf, ElementsAreArray({0x1, 0x2, 0x3, 0x4, |
| 0x50, 0x60, 0x70, 0x80, |
| 0x9, 0xa, 0xb, 0xc})); |
| EXPECT_THAT(backing, ElementsAreArray({0x10, 0x20, 0x30, 0x40, |
| 0x50, 0x60, 0x70, 0x80, |
| 0x90, 0xa0, 0xb0, 0xc0})); |
| } |
| |
| // Write the entire register. |
| TEST_F(RegisterBufTest, FullWrite) |
| { |
| reg.write(buf.data() + RegSize); |
| EXPECT_THAT(buf, ElementsAreArray({0x1, 0x2, 0x3, 0x4, |
| 0x5, 0x6, 0x7, 0x8, |
| 0x9, 0xa, 0xb, 0xc})); |
| EXPECT_THAT(backing, ElementsAreArray({0x10, 0x20, 0x30, 0x40, |
| 0x5, 0x6, 0x7, 0x8, |
| 0x90, 0xa0, 0xb0, 0xc0})); |
| } |
| |
| // Partial read, excluding the start of the register. |
| TEST_F(RegisterBufTest, PartialReadHigh) |
| { |
| reg.read(buf.data() + RegSize, 1, 3); |
| EXPECT_THAT(buf, ElementsAreArray({0x1, 0x2, 0x3, 0x4, |
| 0x60, 0x70, 0x80, 0x8, |
| 0x9, 0xa, 0xb, 0xc})); |
| EXPECT_THAT(backing, ElementsAreArray({0x10, 0x20, 0x30, 0x40, |
| 0x50, 0x60, 0x70, 0x80, |
| 0x90, 0xa0, 0xb0, 0xc0})); |
| } |
| |
| // Partial write, excluding the start of the register. |
| TEST_F(RegisterBufTest, PartialWriteHigh) |
| { |
| reg.write(buf.data() + RegSize, 1, 3); |
| EXPECT_THAT(buf, ElementsAreArray({0x1, 0x2, 0x3, 0x4, |
| 0x5, 0x6, 0x7, 0x8, |
| 0x9, 0xa, 0xb, 0xc})); |
| EXPECT_THAT(backing, ElementsAreArray({0x10, 0x20, 0x30, 0x40, |
| 0x50, 0x5, 0x6, 0x7, |
| 0x90, 0xa0, 0xb0, 0xc0})); |
| } |
| |
| // Partial read, excluding the end of the register. |
| TEST_F(RegisterBufTest, PartialReadLow) |
| { |
| reg.read(buf.data() + RegSize, 0, 3); |
| EXPECT_THAT(buf, ElementsAreArray({0x1, 0x2, 0x3, 0x4, |
| 0x50, 0x60, 0x70, 0x8, |
| 0x9, 0xa, 0xb, 0xc})); |
| EXPECT_THAT(backing, ElementsAreArray({0x10, 0x20, 0x30, 0x40, |
| 0x50, 0x60, 0x70, 0x80, |
| 0x90, 0xa0, 0xb0, 0xc0})); |
| } |
| |
| // Partial write, excluding the end of the register. |
| TEST_F(RegisterBufTest, PartialWriteLow) |
| { |
| reg.write(buf.data() + RegSize, 0, 3); |
| EXPECT_THAT(buf, ElementsAreArray({0x1, 0x2, 0x3, 0x4, |
| 0x5, 0x6, 0x7, 0x8, |
| 0x9, 0xa, 0xb, 0xc})); |
| EXPECT_THAT(backing, ElementsAreArray({0x10, 0x20, 0x30, 0x40, |
| 0x5, 0x6, 0x7, 0x80, |
| 0x90, 0xa0, 0xb0, 0xc0})); |
| } |
| |
| // Partial read, excluding both ends of the register. |
| TEST_F(RegisterBufTest, PartialReadMid) |
| { |
| reg.read(buf.data() + RegSize, 1, 2); |
| EXPECT_THAT(buf, ElementsAreArray({0x1, 0x2, 0x3, 0x4, |
| 0x60, 0x70, 0x7, 0x8, |
| 0x9, 0xa, 0xb, 0xc})); |
| EXPECT_THAT(backing, ElementsAreArray({0x10, 0x20, 0x30, 0x40, |
| 0x50, 0x60, 0x70, 0x80, |
| 0x90, 0xa0, 0xb0, 0xc0})); |
| } |
| |
| // Partial write, excluding both ends of the register. |
| TEST_F(RegisterBufTest, PartialWriteMid) |
| { |
| reg.write(buf.data() + RegSize, 1, 2); |
| EXPECT_THAT(buf, ElementsAreArray({0x1, 0x2, 0x3, 0x4, |
| 0x5, 0x6, 0x7, 0x8, |
| 0x9, 0xa, 0xb, 0xc})); |
| EXPECT_THAT(backing, ElementsAreArray({0x10, 0x20, 0x30, 0x40, |
| 0x50, 0x5, 0x6, 0x80, |
| 0x90, 0xa0, 0xb0, 0xc0})); |
| } |
| |
| TEST_F(RegisterBufTest, Serialize) |
| { |
| std::ostringstream os; |
| reg.serialize(os); |
| EXPECT_EQ(os.str(), ""); |
| } |
| |
| TEST_F(RegisterBufTest, Unserialize) |
| { |
| std::string s; |
| EXPECT_TRUE(reg.unserialize(s)); |
| } |
| |
| |
| /* |
| * The RegisterLBuf type. Since it's so similar to RegisterBuf, just do a |
| * basic check that it's applying it's locally managed buffer to it's parent |
| * type. |
| */ |
| |
| class RegisterLBufTest : public testing::Test |
| { |
| protected: |
| static constexpr size_t RegSize = 12; |
| |
| RegisterBankLE::RegisterLBuf<12> reg; |
| std::array<uint8_t, 4> to_write; |
| |
| public: |
| RegisterLBufTest() : reg("lbuf_reg"), to_write{0x1, 0x2, 0x3, 0x4} |
| { |
| reg.buffer.fill(0xff); |
| } |
| }; |
| |
| TEST_F(RegisterLBufTest, Name) |
| { |
| EXPECT_EQ(reg.name(), "lbuf_reg"); |
| } |
| |
| TEST_F(RegisterLBufTest, PartialWrite) |
| { |
| reg.write(to_write.data(), 4, 4); |
| EXPECT_THAT(reg.buffer, ElementsAreArray({0xff, 0xff, 0xff, 0xff, |
| 0x1, 0x2, 0x3, 0x4, |
| 0xff, 0xff, 0xff, 0xff})); |
| } |
| |
| TEST_F(RegisterLBufTest, Serialize) |
| { |
| std::ostringstream os; |
| for (int i = 0; i < reg.buffer.size(); i++) |
| reg.buffer[i] = i; |
| reg.serialize(os); |
| EXPECT_EQ(os.str(), "0 1 2 3 4 5 6 7 8 9 10 11"); |
| } |
| |
| TEST_F(RegisterLBufTest, UnserializeSucess) |
| { |
| std::string s = "0 1 2 3 4 5 6 7 8 9 10 11"; |
| EXPECT_TRUE(reg.unserialize(s)); |
| EXPECT_THAT(reg.buffer, ElementsAreArray({0, 1, 2, 3, 4, 5, |
| 6, 7, 8, 9, 10, 11})); |
| } |
| |
| TEST_F(RegisterLBufTest, UnserializeFailure) |
| { |
| std::string s = "0 1 2 3 4 5 6 7 8 9 10"; |
| EXPECT_FALSE(reg.unserialize(s)); |
| EXPECT_THAT(reg.buffer, ElementsAreArray({0xff, 0xff, 0xff, 0xff, |
| 0xff, 0xff, 0xff, 0xff, |
| 0xff, 0xff, 0xff, 0xff})); |
| } |
| |
| |
| /* |
| * The templated Register<> type which takes a backing type and endianness |
| * as template parameters. |
| */ |
| |
| class TypedRegisterTest : public testing::Test |
| { |
| protected: |
| using BackingType = uint16_t; |
| static constexpr size_t RegSize = sizeof(BackingType); |
| |
| // We'll typically test with the little endian version, since it only |
| // matters for a few methods. |
| RegisterBankLE::Register<BackingType> reg; |
| RegisterBankBE::Register<BackingType> regBE; |
| |
| std::array<uint8_t, RegSize * 3> buf; |
| |
| TypedRegisterTest() : reg("le_reg", 0x1122), regBE("be_reg", 0x1122), |
| buf{0x1, 0x2, 0x3, 0x4, 0x5, 0x6} |
| {} |
| }; |
| // Needed by C++14 and lower |
| constexpr size_t TypedRegisterTest::RegSize; |
| |
| TEST_F(TypedRegisterTest, DefaultConstructor) |
| { |
| RegisterBankLE::Register<uint32_t> def("def"); |
| EXPECT_EQ(def.get(), 0); |
| } |
| |
| TEST_F(TypedRegisterTest, Name) |
| { |
| EXPECT_EQ(reg.name(), "le_reg"); |
| } |
| |
| TEST_F(TypedRegisterTest, Size) |
| { |
| EXPECT_EQ(reg.size(), RegSize); |
| } |
| |
| TEST_F(TypedRegisterTest, Writable) |
| { |
| // By default, all bits of the registers are writeable. |
| EXPECT_EQ(reg.writeable(), 0xffff); |
| } |
| |
| // Verify that get returns the initial value of the reg. |
| TEST_F(TypedRegisterTest, GetInitial) |
| { |
| EXPECT_EQ(reg.get(), 0x1122); |
| } |
| |
| TEST_F(TypedRegisterTest, Get) |
| { |
| reg.get() = 0x1020; |
| EXPECT_EQ(reg.get(), 0x1020); |
| reg.get() = 0x3040; |
| EXPECT_EQ(reg.get(), 0x3040); |
| } |
| |
| // Do a full big endian read using the default read handler. |
| TEST_F(TypedRegisterTest, BigEndianDefaultFullRead) |
| { |
| regBE.read(buf.data() + RegSize); |
| EXPECT_EQ(regBE.get(), 0x1122); |
| EXPECT_THAT(buf, ElementsAre(0x1, 0x2, 0x11, 0x22, 0x5, 0x6)); |
| } |
| |
| // Do a full big endian write using the default write handler. |
| TEST_F(TypedRegisterTest, BigEndianDefaultFullWrite) |
| { |
| regBE.write(buf.data() + RegSize); |
| EXPECT_EQ(regBE.get(), 0x0304); |
| EXPECT_THAT(buf, ElementsAre(0x1, 0x2, 0x3, 0x4, 0x5, 0x6)); |
| } |
| |
| // Do a partial big endian read of the low half of the register. |
| TEST_F(TypedRegisterTest, BigEndianDefaultPartialReadLow) |
| { |
| regBE.read(buf.data() + RegSize, 0, 1); |
| EXPECT_EQ(regBE.get(), 0x1122); |
| EXPECT_THAT(buf, ElementsAre(0x1, 0x2, 0x11, 0x4, 0x5, 0x6)); |
| } |
| |
| // Do a partial big endian read of the high half of the register. |
| TEST_F(TypedRegisterTest, BigEndianDefaultPartialReadHigh) |
| { |
| regBE.read(buf.data() + RegSize, 1, 1); |
| EXPECT_EQ(regBE.get(), 0x1122); |
| EXPECT_THAT(buf, ElementsAre(0x1, 0x2, 0x22, 0x4, 0x5, 0x6)); |
| } |
| |
| // Do a partial big endian write of the low half of the register. |
| TEST_F(TypedRegisterTest, BigEndianDefaultPartialWriteLow) |
| { |
| regBE.write(buf.data() + RegSize, 0, 1); |
| EXPECT_EQ(regBE.get(), 0x0322); |
| EXPECT_THAT(buf, ElementsAre(0x1, 0x2, 0x3, 0x4, 0x5, 0x6)); |
| } |
| |
| // Do a partial big endian write of the High half of the register. |
| TEST_F(TypedRegisterTest, BigEndianDefaultPartialWriteHigh) |
| { |
| regBE.write(buf.data() + RegSize, 1, 1); |
| EXPECT_EQ(regBE.get(), 0x1103); |
| EXPECT_THAT(buf, ElementsAre(0x1, 0x2, 0x3, 0x4, 0x5, 0x6)); |
| } |
| |
| // Do a full little endian read using the default read handler. |
| TEST_F(TypedRegisterTest, LittleEndianDefaultFullRead) |
| { |
| reg.read(buf.data() + RegSize); |
| EXPECT_EQ(reg.get(), 0x1122); |
| EXPECT_THAT(buf, ElementsAre(0x1, 0x2, 0x22, 0x11, 0x5, 0x6)); |
| } |
| |
| // Do a full little endian write using the default write handler. |
| TEST_F(TypedRegisterTest, LittleEndianDefaultFullWrite) |
| { |
| reg.write(buf.data() + RegSize); |
| EXPECT_EQ(reg.get(), 0x0403); |
| EXPECT_THAT(buf, ElementsAre(0x1, 0x2, 0x3, 0x4, 0x5, 0x6)); |
| } |
| |
| // Do a partial little endian read of the low half of the register. |
| TEST_F(TypedRegisterTest, LittleEndianDefaultPartialReadLow) |
| { |
| reg.read(buf.data() + RegSize, 0, 1); |
| EXPECT_EQ(reg.get(), 0x1122); |
| EXPECT_THAT(buf, ElementsAre(0x1, 0x2, 0x22, 0x4, 0x5, 0x6)); |
| } |
| |
| // Do a partial little endian read of the high half of the register. |
| TEST_F(TypedRegisterTest, LittleEndianDefaultPartialReadHigh) |
| { |
| reg.read(buf.data() + RegSize, 1, 1); |
| EXPECT_EQ(reg.get(), 0x1122); |
| EXPECT_THAT(buf, ElementsAre(0x1, 0x2, 0x11, 0x4, 0x5, 0x6)); |
| } |
| |
| // Do a partial little endian write of the low half of the register. |
| TEST_F(TypedRegisterTest, LittleEndianDefaultPartialWriteLow) |
| { |
| reg.write(buf.data() + RegSize, 0, 1); |
| EXPECT_EQ(reg.get(), 0x1103); |
| EXPECT_THAT(buf, ElementsAre(0x1, 0x2, 0x3, 0x4, 0x5, 0x6)); |
| } |
| |
| // Do a partial little endian write of the High half of the register. |
| TEST_F(TypedRegisterTest, LittleEndianDefaultPartialWriteHigh) |
| { |
| reg.write(buf.data() + RegSize, 1, 1); |
| EXPECT_EQ(reg.get(), 0x0322); |
| EXPECT_THAT(buf, ElementsAre(0x1, 0x2, 0x3, 0x4, 0x5, 0x6)); |
| } |
| |
| // Set a mask for use on writes. |
| TEST_F(TypedRegisterTest, SetWriteable) |
| { |
| reg.writeable(0xff00); |
| reg.write(buf.data() + RegSize); |
| EXPECT_EQ(reg.get(), 0x0422); |
| |
| regBE.writeable(0xff00); |
| regBE.write(buf.data() + RegSize); |
| EXPECT_EQ(regBE.get(), 0x0322); |
| } |
| |
| // Make a register read only. |
| TEST_F(TypedRegisterTest, ReadOnly) |
| { |
| reg.readonly(); |
| reg.write(buf.data() + RegSize); |
| EXPECT_EQ(reg.get(), 0x1122); |
| } |
| |
| // Update a register with an explicit mask. |
| TEST_F(TypedRegisterTest, UpdateWithMask) |
| { |
| reg.update(0xeeee, 0x0ff0); |
| EXPECT_EQ(reg.get(), 0x1ee2); |
| } |
| |
| // Update a register using the register's built in mask. |
| TEST_F(TypedRegisterTest, UpdateDefaultMask) |
| { |
| reg.writeable(0xf00f); |
| reg.update(0xeeee); |
| EXPECT_EQ(reg.get(), 0xe12e); |
| } |
| |
| // Set a custom read handler for a register. |
| TEST_F(TypedRegisterTest, Reader) |
| { |
| RegisterBankLE::Register<BackingType> *reg_ptr = nullptr; |
| BackingType ret = 0x3344; |
| |
| reg.reader([®_ptr, &ret](auto &r){ |
| reg_ptr = &r; |
| return ret; |
| }); |
| |
| reg.read(buf.data() + RegSize); |
| EXPECT_THAT(buf, ElementsAre(0x1, 0x2, 0x44, 0x33, 0x5, 0x6)); |
| EXPECT_EQ(reg_ptr, ®); |
| } |
| |
| // Set a custom read handler for a register which is a class method. |
| TEST_F(TypedRegisterTest, ReaderMF) |
| { |
| using Reg = RegisterBankLE::Register<BackingType>; |
| |
| struct ReadStruct |
| { |
| Reg *reg_ptr = nullptr; |
| BackingType ret = 0x3344; |
| |
| BackingType |
| reader(Reg &r) |
| { |
| reg_ptr = &r; |
| return ret; |
| } |
| } read_struct; |
| |
| reg.reader(&read_struct, &ReadStruct::reader); |
| |
| reg.read(buf.data() + RegSize); |
| EXPECT_THAT(buf, ElementsAre(0x1, 0x2, 0x44, 0x33, 0x5, 0x6)); |
| EXPECT_EQ(read_struct.reg_ptr, ®); |
| } |
| |
| // Set a custom write handler for a register. |
| TEST_F(TypedRegisterTest, Writer) |
| { |
| RegisterBankLE::Register<BackingType> *reg_ptr = nullptr; |
| BackingType value = 0; |
| |
| reg.writer([®_ptr, &value](auto &r, const BackingType &v) { |
| reg_ptr = &r; |
| value = v; |
| }); |
| |
| reg.write(buf.data() + RegSize); |
| EXPECT_EQ(reg_ptr, ®); |
| EXPECT_EQ(value, 0x0403); |
| } |
| |
| // Set a custom write handler for a register which is a class method. |
| TEST_F(TypedRegisterTest, WriterMF) |
| { |
| using Reg = RegisterBankLE::Register<BackingType>; |
| |
| struct WriteStruct |
| { |
| Reg *reg_ptr = nullptr; |
| BackingType value = 0; |
| |
| void |
| writer(Reg &r, const BackingType &v) |
| { |
| reg_ptr = &r; |
| value = v; |
| } |
| } write_struct; |
| |
| reg.writer(&write_struct, &WriteStruct::writer); |
| |
| reg.write(buf.data() + RegSize); |
| EXPECT_EQ(write_struct.reg_ptr, ®); |
| EXPECT_THAT(write_struct.value, 0x0403); |
| } |
| |
| // Set a custom partial read handler for a register. |
| TEST_F(TypedRegisterTest, PartialReader) |
| { |
| RegisterBankLE::Register<BackingType> *reg_ptr = nullptr; |
| int first = 0; |
| int last = 0; |
| BackingType ret = 0x3344; |
| |
| reg.partialReader([®_ptr, &first, &last, ret](auto &r, int f, int l) { |
| reg_ptr = &r; |
| first = f; |
| last = l; |
| return ret; |
| }); |
| |
| reg.read(buf.data() + RegSize, 1, 1); |
| EXPECT_THAT(buf, ElementsAre(0x1, 0x2, 0x33, 0x4, 0x5, 0x6)); |
| EXPECT_EQ(reg_ptr, ®); |
| EXPECT_EQ(first, 15); |
| EXPECT_EQ(last, 8); |
| } |
| |
| // Set a custom partial read handler for a register which is a class method. |
| TEST_F(TypedRegisterTest, PartialReaderMF) |
| { |
| using Reg = RegisterBankLE::Register<BackingType>; |
| |
| struct ReadStruct |
| { |
| Reg *reg_ptr = nullptr; |
| int first = 0; |
| int last = 0; |
| BackingType ret = 0x3344; |
| |
| BackingType |
| reader(Reg &r, int f, int l) |
| { |
| reg_ptr = &r; |
| first = f; |
| last = l; |
| return ret; |
| } |
| } read_struct; |
| |
| reg.partialReader(&read_struct, &ReadStruct::reader); |
| |
| reg.read(buf.data() + RegSize, 1, 1); |
| EXPECT_THAT(buf, ElementsAre(0x1, 0x2, 0x33, 0x4, 0x5, 0x6)); |
| EXPECT_EQ(read_struct.reg_ptr, ®); |
| EXPECT_EQ(read_struct.first, 15); |
| EXPECT_EQ(read_struct.last, 8); |
| } |
| |
| // Set a custom partial write handler for a register. |
| TEST_F(TypedRegisterTest, PartialWriter) |
| { |
| RegisterBankLE::Register<BackingType> *reg_ptr = nullptr; |
| BackingType value = 0; |
| int first = 0; |
| int last = 0; |
| |
| reg.partialWriter([®_ptr, &value, &first, &last]( |
| auto &r, const BackingType &v, int f, int l) { |
| reg_ptr = &r; |
| value = v; |
| first = f; |
| last = l; |
| }); |
| |
| reg.write(buf.data() + RegSize, 1, 1); |
| EXPECT_EQ(reg_ptr, ®); |
| EXPECT_EQ(value, 0x300); |
| EXPECT_EQ(first, 15); |
| EXPECT_EQ(last, 8); |
| } |
| |
| // Set a custom partial write handler for a register which is a class method. |
| TEST_F(TypedRegisterTest, PartialWriterMF) |
| { |
| using Reg = RegisterBankLE::Register<BackingType>; |
| |
| struct WriteStruct |
| { |
| Reg *reg_ptr = nullptr; |
| BackingType value = 0; |
| int first = 0; |
| int last = 0; |
| |
| void |
| writer(Reg &r, const BackingType &v, int f, int l) |
| { |
| reg_ptr = &r; |
| value = v; |
| first = f; |
| last = l; |
| } |
| } write_struct; |
| |
| reg.partialWriter(&write_struct, &WriteStruct::writer); |
| |
| reg.write(buf.data() + RegSize, 1, 1); |
| EXPECT_EQ(write_struct.reg_ptr, ®); |
| EXPECT_EQ(write_struct.value, 0x300); |
| EXPECT_EQ(write_struct.first, 15); |
| EXPECT_EQ(write_struct.last, 8); |
| } |
| |
| // Default partial reader with a custom read handler. |
| TEST_F(TypedRegisterTest, PartialReaderReader) |
| { |
| RegisterBankLE::Register<BackingType> *reg_ptr = nullptr; |
| BackingType ret = 0x3344; |
| |
| reg.reader([®_ptr, &ret](auto &r){ |
| reg_ptr = &r; |
| return ret; |
| }); |
| |
| reg.read(buf.data() + RegSize, 1, 1); |
| EXPECT_THAT(buf, ElementsAre(0x1, 0x2, 0x33, 0x4, 0x5, 0x6)); |
| EXPECT_EQ(reg_ptr, ®); |
| } |
| |
| // Default partial writer with custome read and write handlers. |
| TEST_F(TypedRegisterTest, PartialWriterReaderWriter) |
| { |
| RegisterBankLE::Register<BackingType> *read_reg_ptr = nullptr; |
| BackingType read_ret = 0x3344; |
| |
| RegisterBankLE::Register<BackingType> *write_reg_ptr = nullptr; |
| BackingType write_value = 0; |
| |
| reg.reader([&read_reg_ptr, read_ret](auto &r){ |
| read_reg_ptr = &r; |
| return read_ret; |
| }).writer([&write_reg_ptr, &write_value](auto &r, const BackingType &v) { |
| write_reg_ptr = &r; |
| write_value = v; |
| }); |
| |
| reg.write(buf.data() + RegSize, 1, 1); |
| EXPECT_THAT(buf, ElementsAre(0x1, 0x2, 0x3, 0x4, 0x5, 0x6)); |
| EXPECT_EQ(read_reg_ptr, ®); |
| EXPECT_EQ(write_reg_ptr, ®); |
| EXPECT_EQ(write_value, 0x0344); |
| } |
| |
| TEST_F(TypedRegisterTest, Serialize) |
| { |
| std::ostringstream os; |
| reg.serialize(os); |
| EXPECT_EQ(os.str(), "4386"); |
| } |
| |
| TEST_F(TypedRegisterTest, UnserializeSucess) |
| { |
| std::string s = "1234"; |
| EXPECT_TRUE(reg.unserialize(s)); |
| EXPECT_EQ(reg.get(), 1234); |
| } |
| |
| TEST_F(TypedRegisterTest, UnserializeFailure) |
| { |
| std::string s = "not_a_number"; |
| EXPECT_FALSE(reg.unserialize(s)); |
| } |
| |
| /* |
| * The RegisterBank itself. |
| */ |
| |
| class RegisterBankTest : public testing::Test |
| { |
| protected: |
| class TestRegBank : public RegisterBankLE |
| { |
| public: |
| TestRegBank(const std::string &new_name, Addr new_base) : |
| RegisterBankLE(new_name, new_base) |
| {} |
| }; |
| |
| enum AccessType |
| { |
| Read, |
| Write, |
| PartialRead, |
| PartialWrite |
| }; |
| |
| struct Access |
| { |
| AccessType type; |
| uint32_t value = 0; |
| int first = 0; |
| int last = 0; |
| uint32_t ret = 0; |
| |
| Access(AccessType _type) : type(_type) {} |
| Access(AccessType _type, uint32_t _value, |
| int _first, int _last, uint32_t _ret) : |
| type(_type), value(_value), |
| first(_first), last(_last), ret(_ret) |
| {} |
| |
| bool |
| operator == (const Access &other) const |
| { |
| return type == other.type && value == other.value && |
| first == other.first && last == other.last && |
| ret == other.ret; |
| } |
| }; |
| |
| // A 32 bit register which keeps track of what happens to it. |
| class TestReg : public TestRegBank::Register32 |
| { |
| public: |
| std::vector<Access> accesses; |
| |
| TestReg(const std::string &new_name, uint32_t initial) : |
| TestRegBank::Register32(new_name, initial) |
| { |
| reader([this](auto &r) { |
| Access access(Read); |
| access.ret = defaultReader(r); |
| accesses.push_back(access); |
| return access.ret; |
| }); |
| writer([this](auto &r, const uint32_t &v) { |
| Access access(Write); |
| access.value = v; |
| defaultWriter(r, v); |
| accesses.push_back(access); |
| }); |
| partialReader([this](auto &r, int f, int l) { |
| Access access(PartialRead); |
| access.first = f; |
| access.last = l; |
| access.ret = defaultPartialReader(r, f, l); |
| accesses.push_back(access); |
| return access.ret; |
| }); |
| partialWriter([this](auto &r, const uint32_t &v, int f, int l) { |
| Access access(PartialWrite); |
| access.value = v; |
| access.first = f; |
| access.last = l; |
| defaultPartialWriter(r, v, f, l); |
| accesses.push_back(access); |
| }); |
| } |
| }; |
| |
| TestReg reg0, reg1, reg2; |
| TestRegBank emptyBank, fullBank; |
| |
| std::array<uint8_t, 12> buf; |
| |
| RegisterBankTest() : |
| reg0("reg0", 0xd3d2d1d0), reg1("reg1", 0xe3e2e1e0), |
| reg2("reg2", 0xf3f2f1f0), |
| emptyBank("empty", 0x12345), fullBank("full", 0x1000), |
| buf{0x11, 0x22, 0x33, 0x44, 0x55, 0x66, |
| 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc} |
| { |
| fullBank.addRegisters({reg0, reg1, reg2}); |
| } |
| }; |
| |
| // Some basic accessors. |
| |
| TEST_F(RegisterBankTest, Name) |
| { |
| EXPECT_EQ(emptyBank.name(), "empty"); |
| EXPECT_EQ(fullBank.name(), "full"); |
| } |
| |
| TEST_F(RegisterBankTest, Base) |
| { |
| EXPECT_EQ(emptyBank.base(), 0x12345); |
| EXPECT_EQ(fullBank.base(), 0x1000); |
| } |
| |
| // Adding registers, and the size accessor. With registers, size is boring. |
| TEST_F(RegisterBankTest, AddRegistersSize) |
| { |
| EXPECT_EQ(emptyBank.size(), 0); |
| emptyBank.addRegister(reg0); |
| EXPECT_EQ(emptyBank.size(), 4); |
| emptyBank.addRegisters({reg1, reg2}); |
| EXPECT_EQ(emptyBank.size(), 12); |
| } |
| |
| // Reads. |
| |
| TEST_F(RegisterBankTest, ReadOneAlignedFirst) |
| { |
| fullBank.read(0x1000, buf.data() + 4, 4); |
| EXPECT_THAT(buf, ElementsAreArray({0x11, 0x22, 0x33, 0x44, |
| 0xd0, 0xd1, 0xd2, 0xd3, |
| 0x99, 0xaa, 0xbb, 0xcc})); |
| EXPECT_THAT(reg0.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xd3d2d1d0) |
| )); |
| EXPECT_TRUE(reg1.accesses.empty()); |
| EXPECT_TRUE(reg2.accesses.empty()); |
| } |
| |
| TEST_F(RegisterBankTest, ReadOneAlignedMid) |
| { |
| fullBank.read(0x1004, buf.data() + 4, 4); |
| EXPECT_THAT(buf, ElementsAreArray({0x11, 0x22, 0x33, 0x44, |
| 0xe0, 0xe1, 0xe2, 0xe3, |
| 0x99, 0xaa, 0xbb, 0xcc})); |
| EXPECT_TRUE(reg0.accesses.empty()); |
| EXPECT_THAT(reg1.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xe3e2e1e0) |
| )); |
| EXPECT_TRUE(reg2.accesses.empty()); |
| } |
| |
| TEST_F(RegisterBankTest, ReadOneAlignedLast) |
| { |
| fullBank.read(0x1008, buf.data() + 4, 4); |
| EXPECT_THAT(buf, ElementsAreArray({0x11, 0x22, 0x33, 0x44, |
| 0xf0, 0xf1, 0xf2, 0xf3, |
| 0x99, 0xaa, 0xbb, 0xcc})); |
| EXPECT_TRUE(reg0.accesses.empty()); |
| EXPECT_TRUE(reg1.accesses.empty()); |
| EXPECT_THAT(reg2.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xf3f2f1f0) |
| )); |
| } |
| |
| TEST_F(RegisterBankTest, ReadTwoAligned) |
| { |
| fullBank.read(0x1004, buf.data() + 2, 8); |
| EXPECT_THAT(buf, ElementsAreArray({0x11, 0x22, 0xe0, 0xe1, |
| 0xe2, 0xe3, 0xf0, 0xf1, |
| 0xf2, 0xf3, 0xbb, 0xcc})); |
| EXPECT_TRUE(reg0.accesses.empty()); |
| EXPECT_THAT(reg1.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xe3e2e1e0) |
| )); |
| EXPECT_THAT(reg2.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xf3f2f1f0) |
| )); |
| } |
| |
| TEST_F(RegisterBankTest, ReadContained) |
| { |
| fullBank.read(0x1001, buf.data() + 4, 2); |
| EXPECT_THAT(buf, ElementsAreArray({0x11, 0x22, 0x33, 0x44, |
| 0xd1, 0xd2, 0x77, 0x88, |
| 0x99, 0xaa, 0xbb, 0xcc})); |
| EXPECT_THAT(reg0.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xd3d2d1d0), |
| Access(PartialRead, 0, 23, 8, 0x00d2d100) |
| )); |
| EXPECT_TRUE(reg1.accesses.empty()); |
| EXPECT_TRUE(reg2.accesses.empty()); |
| } |
| |
| TEST_F(RegisterBankTest, ReadOneSpanning) |
| { |
| fullBank.read(0x1002, buf.data() + 4, 4); |
| EXPECT_THAT(buf, ElementsAreArray({0x11, 0x22, 0x33, 0x44, |
| 0xd2, 0xd3, 0xe0, 0xe1, |
| 0x99, 0xaa, 0xbb, 0xcc})); |
| EXPECT_THAT(reg0.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xd3d2d1d0), |
| Access(PartialRead, 0, 31, 16, 0xd3d20000) |
| )); |
| EXPECT_THAT(reg1.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xe3e2e1e0), |
| Access(PartialRead, 0, 15, 0, 0x0000e1e0) |
| )); |
| EXPECT_TRUE(reg2.accesses.empty()); |
| } |
| |
| TEST_F(RegisterBankTest, ReadTwoSpanning) |
| { |
| fullBank.read(0x1002, buf.data() + 2, 8); |
| EXPECT_THAT(buf, ElementsAreArray({0x11, 0x22, 0xd2, 0xd3, |
| 0xe0, 0xe1, 0xe2, 0xe3, |
| 0xf0, 0xf1, 0xbb, 0xcc})); |
| EXPECT_THAT(reg0.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xd3d2d1d0), |
| Access(PartialRead, 0, 31, 16, 0xd3d20000) |
| )); |
| EXPECT_THAT(reg1.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xe3e2e1e0) |
| )); |
| EXPECT_THAT(reg2.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xf3f2f1f0), |
| Access(PartialRead, 0, 15, 0, 0x0000f1f0) |
| )); |
| } |
| |
| TEST_F(RegisterBankTest, ReadPartialFull) |
| { |
| fullBank.read(0x1002, buf.data() + 4, 6); |
| EXPECT_THAT(buf, ElementsAreArray({0x11, 0x22, 0x33, 0x44, |
| 0xd2, 0xd3, 0xe0, 0xe1, |
| 0xe2, 0xe3, 0xbb, 0xcc})); |
| EXPECT_THAT(reg0.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xd3d2d1d0), |
| Access(PartialRead, 0, 31, 16, 0xd3d20000) |
| )); |
| EXPECT_THAT(reg1.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xe3e2e1e0) |
| )); |
| EXPECT_TRUE(reg2.accesses.empty()); |
| } |
| |
| TEST_F(RegisterBankTest, ReadFullPartial) |
| { |
| fullBank.read(0x1004, buf.data() + 4, 6); |
| EXPECT_THAT(buf, ElementsAreArray({0x11, 0x22, 0x33, 0x44, |
| 0xe0, 0xe1, 0xe2, 0xe3, |
| 0xf0, 0xf1, 0xbb, 0xcc})); |
| EXPECT_TRUE(reg0.accesses.empty()); |
| EXPECT_THAT(reg1.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xe3e2e1e0) |
| )); |
| EXPECT_THAT(reg2.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xf3f2f1f0), |
| Access(PartialRead, 0, 15, 0, 0x0000f1f0) |
| )); |
| } |
| |
| TEST_F(RegisterBankTest, ReadLastPartial) |
| { |
| fullBank.read(0x100a, buf.data() + 4, 2); |
| EXPECT_THAT(buf, ElementsAreArray({0x11, 0x22, 0x33, 0x44, |
| 0xf2, 0xf3, 0x77, 0x88, |
| 0x99, 0xaa, 0xbb, 0xcc})); |
| EXPECT_TRUE(reg0.accesses.empty()); |
| EXPECT_TRUE(reg1.accesses.empty()); |
| EXPECT_THAT(reg2.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xf3f2f1f0), |
| Access(PartialRead, 0, 31, 16, 0xf3f20000) |
| )); |
| } |
| |
| // Write. |
| |
| TEST_F(RegisterBankTest, WriteOneAlignedFirst) |
| { |
| fullBank.write(0x1000, buf.data() + 4, 4); |
| EXPECT_EQ(reg0.get(), 0x88776655); |
| EXPECT_EQ(reg1.get(), 0xe3e2e1e0); |
| EXPECT_EQ(reg2.get(), 0xf3f2f1f0); |
| EXPECT_THAT(reg0.accesses, ElementsAre( |
| Access(Write, 0x88776655, 0, 0, 0) |
| )); |
| EXPECT_TRUE(reg1.accesses.empty()); |
| EXPECT_TRUE(reg2.accesses.empty()); |
| } |
| |
| TEST_F(RegisterBankTest, WriteOneAlignedMid) |
| { |
| fullBank.write(0x1004, buf.data() + 4, 4); |
| EXPECT_EQ(reg0.get(), 0xd3d2d1d0); |
| EXPECT_EQ(reg1.get(), 0x88776655); |
| EXPECT_EQ(reg2.get(), 0xf3f2f1f0); |
| EXPECT_TRUE(reg0.accesses.empty()); |
| EXPECT_THAT(reg1.accesses, ElementsAre( |
| Access(Write, 0x88776655, 0, 0, 0) |
| )); |
| EXPECT_TRUE(reg2.accesses.empty()); |
| } |
| |
| TEST_F(RegisterBankTest, WriteOneAlignedLast) |
| { |
| fullBank.write(0x1008, buf.data() + 4, 4); |
| EXPECT_EQ(reg0.get(), 0xd3d2d1d0); |
| EXPECT_EQ(reg1.get(), 0xe3e2e1e0); |
| EXPECT_EQ(reg2.get(), 0x88776655); |
| EXPECT_TRUE(reg0.accesses.empty()); |
| EXPECT_TRUE(reg1.accesses.empty()); |
| EXPECT_THAT(reg2.accesses, ElementsAre( |
| Access(Write, 0x88776655, 0, 0, 0) |
| )); |
| } |
| |
| TEST_F(RegisterBankTest, WriteTwoAligned) |
| { |
| fullBank.write(0x1004, buf.data() + 2, 8); |
| EXPECT_EQ(reg0.get(), 0xd3d2d1d0); |
| EXPECT_EQ(reg1.get(), 0x66554433); |
| EXPECT_EQ(reg2.get(), 0xaa998877); |
| EXPECT_TRUE(reg0.accesses.empty()); |
| EXPECT_THAT(reg1.accesses, ElementsAre( |
| Access(Write, 0x66554433, 0, 0, 0) |
| )); |
| EXPECT_THAT(reg2.accesses, ElementsAre( |
| Access(Write, 0xaa998877, 0, 0, 0) |
| )); |
| } |
| |
| TEST_F(RegisterBankTest, WriteContained) |
| { |
| fullBank.write(0x1001, buf.data() + 4, 2); |
| EXPECT_EQ(reg0.get(), 0xd36655d0); |
| EXPECT_EQ(reg1.get(), 0xe3e2e1e0); |
| EXPECT_EQ(reg2.get(), 0xf3f2f1f0); |
| EXPECT_THAT(reg0.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xd3d2d1d0), |
| Access(Write, 0xd36655d0, 0, 0, 0), |
| Access(PartialWrite, 0x00665500, 23, 8, 0) |
| )); |
| EXPECT_TRUE(reg1.accesses.empty()); |
| EXPECT_TRUE(reg2.accesses.empty()); |
| } |
| |
| TEST_F(RegisterBankTest, WriteOneSpanning) |
| { |
| fullBank.write(0x1002, buf.data() + 4, 4); |
| EXPECT_EQ(reg0.get(), 0x6655d1d0); |
| EXPECT_EQ(reg1.get(), 0xe3e28877); |
| EXPECT_EQ(reg2.get(), 0xf3f2f1f0); |
| EXPECT_THAT(reg0.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xd3d2d1d0), |
| Access(Write, 0x6655d1d0, 0, 0, 0), |
| Access(PartialWrite, 0x66550000, 31, 16, 0) |
| )); |
| EXPECT_THAT(reg1.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xe3e2e1e0), |
| Access(Write, 0xe3e28877, 0, 0, 0), |
| Access(PartialWrite, 0x00008877, 15, 0, 0) |
| )); |
| EXPECT_TRUE(reg2.accesses.empty()); |
| } |
| |
| TEST_F(RegisterBankTest, WriteTwoSpanning) |
| { |
| fullBank.write(0x1002, buf.data() + 2, 8); |
| EXPECT_EQ(reg0.get(), 0x4433d1d0); |
| EXPECT_EQ(reg1.get(), 0x88776655); |
| EXPECT_EQ(reg2.get(), 0xf3f2aa99); |
| EXPECT_THAT(reg0.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xd3d2d1d0), |
| Access(Write, 0x4433d1d0, 0, 0, 0), |
| Access(PartialWrite, 0x44330000, 31, 16, 0) |
| )); |
| EXPECT_THAT(reg1.accesses, ElementsAre( |
| Access(Write, 0x88776655, 0, 0, 0) |
| )); |
| EXPECT_THAT(reg2.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xf3f2f1f0), |
| Access(Write, 0xf3f2aa99, 0, 0, 0), |
| Access(PartialWrite, 0x0000aa99, 15, 0, 0) |
| )); |
| } |
| |
| TEST_F(RegisterBankTest, WritePartialFull) |
| { |
| fullBank.write(0x1002, buf.data() + 4, 6); |
| EXPECT_EQ(reg0.get(), 0x6655d1d0); |
| EXPECT_EQ(reg1.get(), 0xaa998877); |
| EXPECT_EQ(reg2.get(), 0xf3f2f1f0); |
| EXPECT_THAT(reg0.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xd3d2d1d0), |
| Access(Write, 0x6655d1d0, 0, 0, 0), |
| Access(PartialWrite, 0x66550000, 31, 16, 0) |
| )); |
| EXPECT_THAT(reg1.accesses, ElementsAre( |
| Access(Write, 0xaa998877, 0, 0, 0) |
| )); |
| EXPECT_TRUE(reg2.accesses.empty()); |
| } |
| |
| TEST_F(RegisterBankTest, WriteFullPartial) |
| { |
| fullBank.write(0x1004, buf.data() + 4, 6); |
| EXPECT_EQ(reg0.get(), 0xd3d2d1d0); |
| EXPECT_EQ(reg1.get(), 0x88776655); |
| EXPECT_EQ(reg2.get(), 0xf3f2aa99); |
| EXPECT_TRUE(reg0.accesses.empty()); |
| EXPECT_THAT(reg1.accesses, ElementsAre( |
| Access(Write, 0x88776655, 0, 0, 0) |
| )); |
| EXPECT_THAT(reg2.accesses, ElementsAre( |
| Access(Read, 0, 0, 0, 0xf3f2f1f0), |
| Access(Write, 0xf3f2aa99, 0, 0, 0), |
| Access(PartialWrite, 0x0000aa99, 15, 0, 0) |
| )); |
| } |