| # -*- mode:python -*- |
| |
| # Copyright (c) 2013, 2015-2020, 2023 ARM Limited |
| # All rights reserved. |
| # |
| # The license below extends only to copyright in the software and shall |
| # not be construed as granting a license to any other intellectual |
| # property including but not limited to intellectual property relating |
| # to a hardware implementation of the functionality of the software |
| # licensed hereunder. You may use the software subject to the license |
| # terms below provided that you ensure that this notice is replicated |
| # unmodified and in its entirety in all distributions of the software, |
| # modified or unmodified, in source code or in binary form. |
| # |
| # Copyright (c) 2011 Advanced Micro Devices, Inc. |
| # Copyright (c) 2009 The Hewlett-Packard Development Company |
| # Copyright (c) 2004-2005 The Regents of The University of Michigan |
| # All rights reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are |
| # met: redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer; |
| # redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution; |
| # neither the name of the copyright holders nor the names of its |
| # contributors may be used to endorse or promote products derived from |
| # this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| ################################################### |
| # |
| # SCons top-level build description (SConstruct) file. |
| # |
| # While in this directory ('gem5'), just type 'scons' to build the default |
| # configuration (see below), or type 'scons build/<CONFIG>/<binary>' |
| # to build some other configuration (e.g., 'build/X86/gem5.opt' for |
| # the optimized X86 version). |
| # |
| # You can build gem5 in a different directory as long as there is a |
| # 'build/<CONFIG>' somewhere along the target path. The build system |
| # expects that all configs under the same build directory are being |
| # built for the same host system. |
| # |
| # Examples: |
| # |
| # The following two commands are equivalent. The '-u' option tells |
| # scons to search up the directory tree for this SConstruct file. |
| # % cd <path-to-src>/gem5 ; scons build/X86/gem5.debug |
| # % cd <path-to-src>/gem5/build/X86; scons -u gem5.debug |
| # |
| # The following two commands are equivalent and demonstrate building |
| # in a directory outside of the source tree. The '-C' option tells |
| # scons to chdir to the specified directory to find this SConstruct |
| # file. |
| # % cd <path-to-src>/gem5 ; scons /local/foo/build/X86/gem5.debug |
| # % cd /local/foo/build/X86; scons -C <path-to-src>/gem5 gem5.debug |
| # |
| # You can use 'scons -H' to print scons options. If you're in this |
| # 'gem5' directory (or use -u or -C to tell scons where to find this |
| # file), you can use 'scons -h' to print all the gem5-specific build |
| # options as well. |
| # |
| ################################################### |
| |
| # Global Python imports |
| import atexit |
| import os |
| import sys |
| |
| from os import mkdir, remove, environ |
| from os.path import abspath, dirname, expanduser |
| from os.path import isdir, isfile |
| from os.path import join, split |
| |
| import logging |
| logging.basicConfig() |
| |
| # SCons imports |
| import SCons |
| import SCons.Node |
| import SCons.Node.FS |
| import SCons.Tool |
| |
| if getattr(SCons, '__version__', None) in ('3.0.0', '3.0.1'): |
| # Monkey patch a fix which appears in version 3.0.2, since we only |
| # require version 3.0.0 |
| def __hash__(self): |
| return hash(self.lstr) |
| import SCons.Subst |
| SCons.Subst.Literal.__hash__ = __hash__ |
| |
| |
| ######################################################################## |
| # |
| # Command line options. |
| # |
| ######################################################################## |
| |
| linker_options = ('bfd', 'gold', 'lld', 'mold') |
| |
| AddOption('--no-colors', dest='use_colors', action='store_false', |
| help="Don't add color to abbreviated scons output") |
| AddOption('--with-cxx-config', action='store_true', |
| help="Build with support for C++-based configuration") |
| AddOption('--default', |
| help='Override which build_opts file to use for defaults') |
| AddOption('--ignore-style', action='store_true', |
| help='Disable style checking hooks') |
| AddOption('--linker', action='store', default=None, choices=linker_options, |
| help=f'Select which linker to use ({", ".join(linker_options)})') |
| AddOption('--gold-linker', action='store_const', const='gold', dest='linker', |
| help='Use the gold linker. Deprecated: Use --linker=gold') |
| AddOption('--no-compress-debug', action='store_true', |
| help="Don't compress debug info in build files") |
| AddOption('--with-lto', action='store_true', |
| help='Enable Link-Time Optimization') |
| AddOption('--verbose', action='store_true', |
| help='Print full tool command lines') |
| AddOption('--without-python', action='store_true', |
| help='Build without Python configuration support') |
| AddOption('--without-tcmalloc', action='store_true', |
| help='Disable linking against tcmalloc') |
| AddOption('--with-ubsan', action='store_true', |
| help='Build with Undefined Behavior Sanitizer if available') |
| AddOption('--with-asan', action='store_true', |
| help='Build with Address Sanitizer if available') |
| AddOption('--with-systemc-tests', action='store_true', |
| help='Build systemc tests') |
| AddOption('--install-hooks', action='store_true', |
| help='Install revision control hooks non-interactively') |
| AddOption('--gprof', action='store_true', |
| help='Enable support for the gprof profiler') |
| AddOption('--pprof', action='store_true', |
| help='Enable support for the pprof profiler') |
| # Default to --no-duplicate-sources, but keep --duplicate-sources to opt-out |
| # of this new build behaviour in case it introduces regressions. We could use |
| # action=argparse.BooleanOptionalAction here once Python 3.9 is required. |
| AddOption('--duplicate-sources', action='store_true', default=False, |
| dest='duplicate_sources', |
| help='Create symlinks to sources in the build directory') |
| AddOption('--no-duplicate-sources', action='store_false', |
| dest='duplicate_sources', |
| help='Do not create symlinks to sources in the build directory') |
| |
| # Inject the built_tools directory into the python path. |
| sys.path[1:1] = [ Dir('#build_tools').abspath ] |
| |
| # Imports of gem5_scons happen here since it depends on some options which are |
| # declared above. |
| from gem5_scons import error, warning, summarize_warnings, parse_build_path |
| from gem5_scons import TempFileSpawn, EnvDefaults, MakeAction, MakeActionTool |
| import gem5_scons |
| from gem5_scons.builders import ConfigFile, AddLocalRPATH, SwitchingHeaders |
| from gem5_scons.builders import Blob |
| from gem5_scons.sources import TagImpliesTool |
| from gem5_scons.util import compareVersions, readCommand |
| |
| # Disable warnings when targets can be built with multiple environments but |
| # with the same actions. This can happen intentionally if, for instance, a |
| # generated source file is used to build object files in different ways in |
| # different environments, but generating the source file itself is exactly the |
| # same. This can be re-enabled from the command line if desired. |
| SetOption('warn', 'no-duplicate-environment') |
| |
| Export('MakeAction') |
| |
| # Patch re.compile to support inline flags anywhere within a RE |
| # string. Required to use PLY with Python 3.11+. |
| gem5_scons.patch_re_compile_for_inline_flags() |
| |
| ######################################################################## |
| # |
| # Set up the main build environment. |
| # |
| ######################################################################## |
| |
| main = Environment(tools=[ |
| 'default', 'git', TempFileSpawn, EnvDefaults, MakeActionTool, |
| ConfigFile, AddLocalRPATH, SwitchingHeaders, TagImpliesTool, Blob |
| ]) |
| |
| main.Tool(SCons.Tool.FindTool(['gcc', 'clang'], main)) |
| main.Tool(SCons.Tool.FindTool(['g++', 'clang++'], main)) |
| |
| Export('main') |
| |
| from gem5_scons.util import get_termcap |
| termcap = get_termcap() |
| |
| # Check that we have a C/C++ compiler |
| if not ('CC' in main and 'CXX' in main): |
| error("No C++ compiler installed (package g++ on Ubuntu and RedHat)") |
| |
| # Find default configuration & binary. |
| Default(environ.get('M5_DEFAULT_BINARY', 'build/ARM/gem5.debug')) |
| |
| |
| ######################################################################## |
| # |
| # Figure out which configurations to set up based on the path(s) of |
| # the target(s). |
| # |
| ######################################################################## |
| |
| # helper function: find last occurrence of element in list |
| def rfind(l, elt, offs = -1): |
| for i in range(len(l)+offs, 0, -1): |
| if l[i] == elt: |
| return i |
| raise ValueError("element not found") |
| |
| # Take a list of paths (or SCons Nodes) and return a list with all |
| # paths made absolute and ~-expanded. Paths will be interpreted |
| # relative to the launch directory unless a different root is provided |
| def makePathListAbsolute(path_list, root=GetLaunchDir()): |
| return [abspath(os.path.join(root, expanduser(str(p)))) |
| for p in path_list] |
| |
| # Each target must have 'build' in the interior of the path; the |
| # directory below this will determine the build parameters. For |
| # example, for target 'foo/bar/build/X86/arch/x86/blah.do' we |
| # recognize that X86 specifies the configuration because it |
| # follow 'build' in the build path. |
| |
| # The funky assignment to "[:]" is needed to replace the list contents |
| # in place rather than reassign the symbol to a new list, which |
| # doesn't work (obviously!). |
| BUILD_TARGETS[:] = makePathListAbsolute(BUILD_TARGETS) |
| |
| # Generate a list of the unique build roots and configs that the |
| # collected targets reference. |
| variant_paths = set() |
| build_root = None |
| for t in BUILD_TARGETS: |
| this_build_root, variant = parse_build_path(t) |
| |
| # Make sure all targets use the same build root. |
| if not build_root: |
| build_root = this_build_root |
| elif this_build_root != build_root: |
| error("build targets not under same build root\n %s\n %s" % |
| (build_root, this_build_root)) |
| |
| # Collect all the variants into a set. |
| variant_paths.add(os.path.join('/', build_root, variant)) |
| |
| # Make sure build_root exists (might not if this is the first build there) |
| if not isdir(build_root): |
| mkdir(build_root) |
| main['BUILDROOT'] = build_root |
| |
| |
| ######################################################################## |
| # |
| # Set up various paths. |
| # |
| ######################################################################## |
| |
| base_dir = Dir('#src').abspath |
| Export('base_dir') |
| |
| # the ext directory should be on the #includes path |
| main.Append(CPPPATH=[Dir('ext')]) |
| |
| # Add shared top-level headers |
| main.Prepend(CPPPATH=Dir('include')) |
| if not GetOption('duplicate_sources'): |
| main.Prepend(CPPPATH=Dir('src')) |
| |
| |
| ######################################################################## |
| # |
| # Set command line options based on the configuration of the host and |
| # build settings. |
| # |
| ######################################################################## |
| |
| # Initialize the Link-Time Optimization (LTO) flags |
| main['LTO_CCFLAGS'] = [] |
| main['LTO_LINKFLAGS'] = [] |
| |
| # According to the readme, tcmalloc works best if the compiler doesn't |
| # assume that we're using the builtin malloc and friends. These flags |
| # are compiler-specific, so we need to set them after we detect which |
| # compiler we're using. |
| main['TCMALLOC_CCFLAGS'] = [] |
| |
| CXX_version = readCommand([main['CXX'], '--version'], exception=False) |
| |
| main['GCC'] = CXX_version and CXX_version.find('g++') >= 0 |
| main['CLANG'] = CXX_version and CXX_version.find('clang') >= 0 |
| if main['GCC'] + main['CLANG'] > 1: |
| error('Two compilers enabled at once?') |
| |
| # Find the gem5 binary target architecture (usually host architecture). The |
| # "Target: <target>" is consistent accross gcc and clang at the time of |
| # writting this. |
| bin_target_arch = readCommand([main['CXX'], '--verbose'], exception=False) |
| main["BIN_TARGET_ARCH"] = ( |
| "x86_64" |
| if bin_target_arch.find("Target: x86_64") != -1 |
| else "aarch64" |
| if bin_target_arch.find("Target: aarch64") != -1 |
| else "unknown" |
| ) |
| |
| ######################################################################## |
| # |
| # Detect and configure external dependencies. |
| # |
| ######################################################################## |
| |
| main['USE_PYTHON'] = not GetOption('without_python') |
| |
| def config_embedded_python(env): |
| # Find Python include and library directories for embedding the |
| # interpreter. We rely on python-config to resolve the appropriate |
| # includes and linker flags. If you want to link in an alternate version |
| # of python, override the PYTHON_CONFIG variable. |
| |
| python_config = env.Detect(env['PYTHON_CONFIG']) |
| if python_config is None: |
| error("Can't find a suitable python-config, tried " |
| f"{env['PYTHON_CONFIG']}") |
| |
| print(f"Info: Using Python config: {python_config}") |
| |
| cmd = [python_config, '--ldflags', '--includes'] |
| |
| # Starting in Python 3.8 the --embed flag is required. Use it if supported. |
| with gem5_scons.Configure(env) as conf: |
| if conf.TryAction(f'@{python_config} --embed')[0]: |
| cmd.append('--embed') |
| |
| def flag_filter(env, cmd_output, unique=True): |
| # Since this function does not use the `unique` param, one should not |
| # pass any value to this param. |
| assert(unique==True) |
| flags = cmd_output.split() |
| prefixes = ('-l', '-L', '-I') |
| is_useful = lambda x: any(x.startswith(prefix) for prefix in prefixes) |
| useful_flags = list(filter(is_useful, flags)) |
| env.MergeFlags(' '.join(useful_flags)) |
| |
| env.ParseConfig(cmd, flag_filter) |
| |
| env.Prepend(CPPPATH=Dir('ext/pybind11/include/')) |
| |
| with gem5_scons.Configure(env) as conf: |
| # verify that this stuff works |
| if not conf.CheckHeader('Python.h', '<>'): |
| error("Check failed for Python.h header.\n", |
| "Two possible reasons:\n" |
| "1. Python headers are not installed (You can install the " |
| "package python-dev on Ubuntu and RedHat)\n" |
| "2. SCons is using a wrong C compiler. This can happen if " |
| "CC has the wrong value.\n" |
| f"CC = {env['CC']}") |
| py_version = conf.CheckPythonLib() |
| if not py_version: |
| error("Can't find a working Python installation") |
| |
| # Found a working Python installation. Check if it meets minimum |
| # requirements. |
| ver_string = '.'.join(map(str, py_version)) |
| if py_version[0] < 3 or (py_version[0] == 3 and py_version[1] < 6): |
| error('Embedded python library 3.6 or newer required, found ' |
| f'{ver_string}.') |
| elif py_version[0] > 3: |
| warning('Embedded python library too new. ' |
| f'Python 3 expected, found {ver_string}.') |
| |
| |
| ######################################################################## |
| # |
| # Define build environments for required variants. |
| # |
| ######################################################################## |
| |
| for variant_path in variant_paths: |
| # Make a copy of the build-root environment to use for this config. |
| env = main.Clone() |
| env['BUILDDIR'] = variant_path |
| |
| gem5_build = os.path.join(build_root, variant_path, 'gem5.build') |
| env['GEM5BUILD'] = gem5_build |
| Execute(Mkdir(gem5_build)) |
| |
| env.SConsignFile(os.path.join(gem5_build, 'sconsign')) |
| |
| # Set up default C++ compiler flags |
| if env['GCC'] or env['CLANG']: |
| # As gcc and clang share many flags, do the common parts here |
| env.Append(CCFLAGS=['-pipe']) |
| env.Append(CCFLAGS=['-fno-strict-aliasing']) |
| |
| # Enable -Wall and -Wextra and then disable the few warnings that |
| # we consistently violate |
| env.Append(CCFLAGS=['-Wall', '-Wundef', '-Wextra', |
| '-Wno-sign-compare', '-Wno-unused-parameter']) |
| |
| # We always compile using C++17 |
| env.Append(CXXFLAGS=['-std=c++17']) |
| |
| if sys.platform.startswith('freebsd'): |
| env.Append(CCFLAGS=['-I/usr/local/include']) |
| env.Append(CXXFLAGS=['-I/usr/local/include']) |
| # On FreeBSD we need libthr. |
| env.Append(LIBS=['thr']) |
| |
| with gem5_scons.Configure(env) as conf: |
| conf.CheckLinkFlag('-Wl,--as-needed') |
| |
| linker = GetOption('linker') |
| if linker: |
| with gem5_scons.Configure(env) as conf: |
| if not conf.CheckLinkFlag(f'-fuse-ld={linker}'): |
| # check mold support for gcc older than 12.1.0 |
| if linker == 'mold' and \ |
| (env['GCC'] and \ |
| compareVersions(env['CXXVERSION'], |
| "12.1.0") < 0) and \ |
| ((isdir('/usr/libexec/mold') and \ |
| conf.CheckLinkFlag('-B/usr/libexec/mold')) or \ |
| (isdir('/usr/local/libexec/mold') and \ |
| conf.CheckLinkFlag('-B/usr/local/libexec/mold'))): |
| pass # support mold |
| else: |
| error(f'Linker "{linker}" is not supported') |
| if linker == 'gold' and not GetOption('with_lto'): |
| # Tell the gold linker to use threads. The gold linker |
| # segfaults if both threads and LTO are enabled. |
| conf.CheckLinkFlag('-Wl,--threads') |
| conf.CheckLinkFlag( |
| '-Wl,--thread-count=%d' % GetOption('num_jobs')) |
| |
| # Treat warnings as errors but white list some warnings that we |
| # want to allow (e.g., deprecation warnings). |
| env.Append(CCFLAGS=['-Werror', |
| '-Wno-error=deprecated-declarations', |
| '-Wno-error=deprecated', |
| ]) |
| |
| else: |
| error('\n'.join(( |
| "Don't know what compiler options to use for your compiler.", |
| "compiler: " + env['CXX'], |
| "version: " + CXX_version.replace('\n', '<nl>') if |
| CXX_version else 'COMMAND NOT FOUND!', |
| "If you're trying to use a compiler other than GCC", |
| "or clang, there appears to be something wrong with your", |
| "environment.", |
| "", |
| "If you are trying to use a compiler other than those listed", |
| "above you will need to ease fix SConstruct and ", |
| "src/SConscript to support that compiler."))) |
| |
| if env['GCC']: |
| if compareVersions(env['CXXVERSION'], "7") < 0: |
| error('gcc version 7 or newer required.\n' |
| 'Installed version:', env['CXXVERSION']) |
| |
| # Add the appropriate Link-Time Optimization (LTO) flags if |
| # `--with-lto` is set. |
| if GetOption('with_lto'): |
| # g++ uses "make" to parallelize LTO. The program can be overriden |
| # with the environment variable "MAKE", but we currently make no |
| # attempt to plumb that variable through. |
| parallelism = '' |
| if env.Detect('make'): |
| parallelism = '=%d' % GetOption('num_jobs') |
| else: |
| warning('"make" not found, link time optimization will be ' |
| 'single threaded.') |
| |
| for var in 'LTO_CCFLAGS', 'LTO_LINKFLAGS': |
| # Use the same amount of jobs for LTO as scons. |
| env[var] = ['-flto%s' % parallelism] |
| |
| env.Append(TCMALLOC_CCFLAGS=[ |
| '-fno-builtin-malloc', '-fno-builtin-calloc', |
| '-fno-builtin-realloc', '-fno-builtin-free']) |
| |
| if compareVersions(env['CXXVERSION'], "9") < 0: |
| # `libstdc++fs`` must be explicitly linked for `std::filesystem`` |
| # in GCC version 8. As of GCC version 9, this is not required. |
| # |
| # In GCC 7 the `libstdc++fs`` library explicit linkage is also |
| # required but the `std::filesystem` is under the `experimental` |
| # namespace(`std::experimental::filesystem`). |
| # |
| # Note: gem5 does not support GCC versions < 7. |
| env.Append(LIBS=['stdc++fs']) |
| |
| elif env['CLANG']: |
| if compareVersions(env['CXXVERSION'], "6") < 0: |
| error('clang version 6 or newer required.\n' |
| 'Installed version:', env['CXXVERSION']) |
| |
| # Set the Link-Time Optimization (LTO) flags if enabled. |
| if GetOption('with_lto'): |
| for var in 'LTO_CCFLAGS', 'LTO_LINKFLAGS': |
| env[var] = ['-flto'] |
| |
| # clang has a few additional warnings that we disable. |
| with gem5_scons.Configure(env) as conf: |
| conf.CheckCxxFlag('-Wno-c99-designator') |
| conf.CheckCxxFlag('-Wno-defaulted-function-deleted') |
| |
| env.Append(TCMALLOC_CCFLAGS=['-fno-builtin']) |
| |
| if compareVersions(env['CXXVERSION'], "11") < 0: |
| # `libstdc++fs`` must be explicitly linked for `std::filesystem`` |
| # in clang versions 6 through 10. |
| # |
| # In addition, for these versions, the |
| # `std::filesystem` is under the `experimental` |
| # namespace(`std::experimental::filesystem`). |
| # |
| # Note: gem5 does not support clang versions < 6. |
| env.Append(LIBS=['stdc++fs']) |
| |
| |
| # On Mac OS X/Darwin we need to also use libc++ (part of XCode) as |
| # opposed to libstdc++, as the later is dated. |
| if sys.platform == "darwin": |
| env.Append(CXXFLAGS=['-stdlib=libc++']) |
| env.Append(LIBS=['c++']) |
| |
| # Add sanitizers flags |
| sanitizers=[] |
| if GetOption('with_ubsan'): |
| sanitizers.append('undefined') |
| if GetOption('with_asan'): |
| # Available for gcc >= 5 or llvm >= 3.1 both a requirement |
| # by the build system |
| sanitizers.append('address') |
| suppressions_file = Dir('util').File('lsan-suppressions').get_abspath() |
| suppressions_opt = 'suppressions=%s' % suppressions_file |
| suppressions_opts = ':'.join([suppressions_opt, |
| 'print_suppressions=0']) |
| env['ENV']['LSAN_OPTIONS'] = suppressions_opts |
| print() |
| warning('To suppress false positive leaks, set the LSAN_OPTIONS ' |
| 'environment variable to "%s" when running gem5' % |
| suppressions_opts) |
| warning('LSAN_OPTIONS=%s' % suppressions_opts) |
| print() |
| if sanitizers: |
| sanitizers = ','.join(sanitizers) |
| if env['GCC'] or env['CLANG']: |
| env.Append(CCFLAGS=['-fsanitize=%s' % sanitizers, |
| '-fno-omit-frame-pointer'], |
| LINKFLAGS=['-fsanitize=%s' % sanitizers, |
| '-static-libasan']) |
| |
| if main["BIN_TARGET_ARCH"] == "x86_64": |
| # Sanitizers can enlarge binary size drammatically, north of |
| # 2GB. This can prevent successful linkage due to symbol |
| # relocation outside from the 2GB region allocated by the small |
| # x86_64 code model that is enabled by default (32-bit relative |
| # offset limitation). Switching to the medium model in x86_64 |
| # enables 64-bit relative offset for large objects (>64KB by |
| # default) while sticking to 32-bit relative addressing for |
| # code and smaller objects. Note this comes at a potential |
| # performance cost so it should not be enabled in all cases. |
| # This should still be a very happy medium for |
| # non-perf-critical sanitized builds. |
| env.Append(CCFLAGS='-mcmodel=medium') |
| env.Append(LINKFLAGS='-mcmodel=medium') |
| elif main["BIN_TARGET_ARCH"] == "aarch64": |
| # aarch64 default code model is small but with different |
| # constrains than for x86_64. With aarch64, the small code |
| # model enables 4GB distance between symbols. This is |
| # sufficient for the largest ALL/gem5.debug target with all |
| # sanitizers enabled at the time of writting this. Note that |
| # the next aarch64 code model is "large" which prevents dynamic |
| # linkage so it should be avoided when possible. |
| pass |
| else: |
| warning( |
| "Unknown code model options for your architecture. " |
| "Linkage might fail for larger binaries " |
| "(e.g., ALL/gem5.debug with sanitizers enabled)." |
| ) |
| else: |
| warning("Don't know how to enable %s sanitizer(s) for your " |
| "compiler." % sanitizers) |
| |
| if sys.platform == 'cygwin': |
| # cygwin has some header file issues... |
| env.Append(CCFLAGS=["-Wno-uninitialized"]) |
| |
| |
| if not GetOption('no_compress_debug'): |
| with gem5_scons.Configure(env) as conf: |
| if not conf.CheckCxxFlag('-gz'): |
| warning("Can't enable object file debug section compression") |
| if not conf.CheckLinkFlag('-gz'): |
| warning("Can't enable executable debug section compression") |
| |
| if env['USE_PYTHON']: |
| config_embedded_python(env) |
| gem5py_env = env.Clone() |
| else: |
| gem5py_env = env.Clone() |
| config_embedded_python(gem5py_env) |
| |
| # Bare minimum environment that only includes python |
| gem5py_env.Append(CCFLAGS=['${GEM5PY_CCFLAGS_EXTRA}']) |
| gem5py_env.Append(LINKFLAGS=['${GEM5PY_LINKFLAGS_EXTRA}']) |
| |
| if GetOption('gprof') and GetOption('pprof'): |
| error('Only one type of profiling should be enabled at a time') |
| if GetOption('gprof'): |
| env.Append(CCFLAGS=['-g', '-pg'], LINKFLAGS=['-pg']) |
| if GetOption('pprof'): |
| env.Append(CCFLAGS=['-g'], |
| LINKFLAGS=['-Wl,--no-as-needed', '-lprofiler', |
| '-Wl,--as-needed']) |
| |
| env['HAVE_PKG_CONFIG'] = env.Detect('pkg-config') |
| |
| with gem5_scons.Configure(env) as conf: |
| # On Solaris you need to use libsocket for socket ops |
| if not conf.CheckLibWithHeader( |
| [None, 'socket'], 'sys/socket.h', 'C++', 'accept(0,0,0);'): |
| error("Can't find library with socket calls (e.g. accept()).") |
| |
| if not conf.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'): |
| error('Did not find needed zlib compression library ' |
| 'and/or zlib.h header file.\n' |
| 'Please install zlib and try again.') |
| |
| if not GetOption('without_tcmalloc'): |
| with gem5_scons.Configure(env) as conf: |
| if conf.CheckLib('tcmalloc_minimal'): |
| conf.env.Append(CCFLAGS=conf.env['TCMALLOC_CCFLAGS']) |
| elif conf.CheckLib('tcmalloc'): |
| conf.env.Append(CCFLAGS=conf.env['TCMALLOC_CCFLAGS']) |
| else: |
| warning("You can get a 12% performance improvement by " |
| "installing tcmalloc (libgoogle-perftools-dev package " |
| "on Ubuntu or RedHat).") |
| |
| if not GetOption('silent'): |
| print("Building in", variant_path) |
| |
| # variant_dir is the tail component of build path, and is used to |
| # determine the build parameters (e.g., 'X86') |
| (build_root, variant_dir) = os.path.split(variant_path) |
| |
| #################################################################### |
| # |
| # Read and process SConsopts files. These can add new settings which |
| # affect each variant directory independently. |
| # |
| #################################################################### |
| |
| # Register a callback to call after all SConsopts files have been read. |
| after_sconsopts_callbacks = [] |
| def AfterSConsopts(cb): |
| after_sconsopts_callbacks.append(cb) |
| Export('AfterSConsopts') |
| |
| # Sticky variables get saved in the variables file so they persist from |
| # one invocation to the next (unless overridden, in which case the new |
| # value becomes sticky). |
| sticky_vars = Variables(args=ARGUMENTS) |
| Export('sticky_vars') |
| |
| # EXTRAS is special since it affects what SConsopts need to be read. |
| sticky_vars.Add(('EXTRAS', 'Add extra directories to the compilation', '')) |
| |
| # Set env variables according to the build directory config. |
| sticky_vars.files = [] |
| # Variables for $BUILD_ROOT/$VARIANT_DIR are stored in |
| # $BUILD_ROOT/$VARIANT_DIR/gem5.build/variables |
| |
| gem5_build_vars = os.path.join(gem5_build, 'variables') |
| build_root_vars = os.path.join(build_root, 'variables', variant_dir) |
| current_vars_files = [gem5_build_vars, build_root_vars] |
| existing_vars_files = list(filter(isfile, current_vars_files)) |
| if existing_vars_files: |
| sticky_vars.files.extend(existing_vars_files) |
| if not GetOption('silent'): |
| print('Using saved variables file(s) %s' % |
| ', '.join(existing_vars_files)) |
| else: |
| # Variant specific variables file doesn't exist. |
| |
| # Get default build variables from source tree. Variables are |
| # normally determined by name of $VARIANT_DIR, but can be |
| # overridden by '--default=' arg on command line. |
| default = GetOption('default') |
| opts_dir = Dir('#build_opts').abspath |
| if default: |
| default_vars_files = [ |
| gem5_build_vars, |
| build_root_vars, |
| os.path.join(opts_dir, default) |
| ] |
| else: |
| default_vars_files = [os.path.join(opts_dir, variant_dir)] |
| existing_default_files = list(filter(isfile, default_vars_files)) |
| if existing_default_files: |
| default_vars_file = existing_default_files[0] |
| sticky_vars.files.append(default_vars_file) |
| print("Variables file(s) %s not found,\n using defaults in %s" % |
| (' or '.join(current_vars_files), default_vars_file)) |
| else: |
| error("Cannot find variables file(s) %s or default file(s) %s" % |
| (' or '.join(current_vars_files), |
| ' or '.join(default_vars_files))) |
| Exit(1) |
| |
| # Apply current settings for EXTRAS to env. |
| sticky_vars.Update(env) |
| |
| # Parse EXTRAS variable to build list of all directories where we're |
| # look for sources etc. This list is exported as extras_dir_list. |
| if env['EXTRAS']: |
| extras_dir_list = makePathListAbsolute(env['EXTRAS'].split(':')) |
| else: |
| extras_dir_list = [] |
| |
| Export('extras_dir_list') |
| |
| # Variables which were determined with Configure. |
| env['CONF'] = {} |
| |
| # Walk the tree and execute all SConsopts scripts that wil add to the |
| # above variables |
| if GetOption('verbose'): |
| print("Reading SConsopts") |
| |
| def trySConsopts(dir): |
| sconsopts_path = os.path.join(dir, 'SConsopts') |
| if not isfile(sconsopts_path): |
| return |
| if GetOption('verbose'): |
| print("Reading", sconsopts_path) |
| SConscript(sconsopts_path, exports={'main': env}) |
| |
| trySConsopts(Dir('#').abspath) |
| for bdir in [ base_dir ] + extras_dir_list: |
| if not isdir(bdir): |
| error("Directory '%s' does not exist." % bdir) |
| for root, dirs, files in os.walk(bdir): |
| trySConsopts(root) |
| |
| # Call any callbacks which the SConsopts files registered. |
| for cb in after_sconsopts_callbacks: |
| cb() |
| |
| # Update env for new variables added by the SConsopts. |
| sticky_vars.Update(env) |
| |
| Help(''' |
| Build variables for {dir}: |
| {help} |
| '''.format(dir=variant_dir, help=sticky_vars.GenerateHelpText(env)), |
| append=True) |
| |
| # If the old vars file exists, delete it to avoid confusion/stale values. |
| if isfile(build_root_vars): |
| warning(f'Deleting old variant variables file "{build_root_vars}"') |
| remove(build_root_vars) |
| # Save sticky variables back to the gem5.build variant variables file. |
| sticky_vars.Save(gem5_build_vars, env) |
| |
| # Pull all the sticky variables into the CONF dict. |
| env['CONF'].update({key: env[key] for key in sticky_vars.keys()}) |
| |
| # Do this after we save setting back, or else we'll tack on an |
| # extra 'qdo' every time we run scons. |
| if env['CONF']['BATCH']: |
| env['CC'] = env['CONF']['BATCH_CMD'] + ' ' + env['CC'] |
| env['CXX'] = env['CONF']['BATCH_CMD'] + ' ' + env['CXX'] |
| env['AS'] = env['CONF']['BATCH_CMD'] + ' ' + env['AS'] |
| env['AR'] = env['CONF']['BATCH_CMD'] + ' ' + env['AR'] |
| env['RANLIB'] = env['CONF']['BATCH_CMD'] + ' ' + env['RANLIB'] |
| |
| # Cache build files in the supplied directory. |
| if env['CONF']['M5_BUILD_CACHE']: |
| print('Using build cache located at', env['CONF']['M5_BUILD_CACHE']) |
| CacheDir(env['CONF']['M5_BUILD_CACHE']) |
| |
| |
| env.Append(CCFLAGS='$CCFLAGS_EXTRA') |
| env.Append(LINKFLAGS='$LINKFLAGS_EXTRA') |
| |
| exports=['env', 'gem5py_env'] |
| |
| ext_dir = Dir('#ext').abspath |
| variant_ext = os.path.join(variant_path, 'ext') |
| for root, dirs, files in os.walk(ext_dir): |
| if 'SConscript' in files: |
| build_dir = os.path.relpath(root, ext_dir) |
| SConscript(os.path.join(root, 'SConscript'), |
| variant_dir=os.path.join(variant_ext, build_dir), |
| exports=exports, |
| duplicate=GetOption('duplicate_sources')) |
| |
| # The src/SConscript file sets up the build rules in 'env' according |
| # to the configured variables. It returns a list of environments, |
| # one for each variant build (debug, opt, etc.) |
| SConscript('src/SConscript', variant_dir=variant_path, exports=exports, |
| duplicate=GetOption('duplicate_sources')) |
| |
| atexit.register(summarize_warnings) |