| /* |
| * Copyright (c) 2009 Mark D. Hill and David A. Wood |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <sys/wait.h> |
| #include <algorithm> |
| |
| #include "config/gems_root.hh" |
| #include "mem/ruby/common/Address.hh" |
| #include "mem/ruby/eventqueue/RubyEventQueue.hh" |
| #include "mem/ruby/libruby_internal.hh" |
| #include "mem/ruby/recorder/Tracer.hh" |
| #include "mem/ruby/system/MemoryVector.hh" |
| #include "mem/ruby/system/RubyPort.hh" |
| #include "mem/ruby/system/System.hh" |
| |
| using namespace std; |
| |
| string |
| RubyRequestType_to_string(const RubyRequestType& obj) |
| { |
| switch(obj) { |
| case RubyRequestType_IFETCH: |
| return "IFETCH"; |
| case RubyRequestType_LD: |
| return "LD"; |
| case RubyRequestType_ST: |
| return "ST"; |
| case RubyRequestType_Locked_Read: |
| return "Locked_Read"; |
| case RubyRequestType_Locked_Write: |
| return "Locked_Write"; |
| case RubyRequestType_RMW_Read: |
| return "RMW_Read"; |
| case RubyRequestType_RMW_Write: |
| return "RMW_Write"; |
| case RubyRequestType_NULL: |
| default: |
| assert(0); |
| return ""; |
| } |
| } |
| |
| RubyRequestType |
| string_to_RubyRequestType(string str) |
| { |
| if (str == "IFETCH") |
| return RubyRequestType_IFETCH; |
| else if (str == "LD") |
| return RubyRequestType_LD; |
| else if (str == "ST") |
| return RubyRequestType_ST; |
| else if (str == "Locked_Read") |
| return RubyRequestType_Locked_Read; |
| else if (str == "Locked_Write") |
| return RubyRequestType_Locked_Write; |
| else if (str == "RMW_Read") |
| return RubyRequestType_RMW_Read; |
| else if (str == "RMW_Write") |
| return RubyRequestType_RMW_Write; |
| else |
| assert(0); |
| return RubyRequestType_NULL; |
| } |
| |
| ostream& |
| operator<<(ostream& out, const RubyRequestType& obj) |
| { |
| out << RubyRequestType_to_string(obj); |
| out << flush; |
| return out; |
| } |
| |
| ostream& |
| operator<<(ostream& out, const RubyRequest& obj) |
| { |
| out << hex << "0x" << obj.paddr << " data: 0x" << flush; |
| for (int i = 0; i < obj.len; i++) { |
| out << (int)obj.data[i]; |
| } |
| out << dec << " type: " << RubyRequestType_to_string(obj.type) << endl; |
| return out; |
| } |
| |
| vector<string> |
| tokenizeString(string str, string delims) |
| { |
| vector<string> tokens; |
| char* pch; |
| char* tmp; |
| const char* c_delims = delims.c_str(); |
| tmp = new char[str.length()+1]; |
| strcpy(tmp, str.c_str()); |
| pch = strtok(tmp, c_delims); |
| while (pch != NULL) { |
| string tmp_str(pch); |
| if (tmp_str == "null") tmp_str = ""; |
| tokens.push_back(tmp_str); |
| |
| pch = strtok(NULL, c_delims); |
| } |
| delete [] tmp; |
| return tokens; |
| } |
| |
| /* |
| * The current state of M5/Ruby integration breaks the libruby |
| * interface. This code is ifdef'd out for now so that we can move |
| * forward with the integration process for non-libruby uses. We'll |
| * have to go back and resolve the libruby compatibility issue at a |
| * later date. |
| */ |
| #if 0 |
| void |
| libruby_init(const char* cfg_filename) |
| { |
| ifstream cfg_output(cfg_filename); |
| |
| vector<RubyObjConf> * sys_conf = new vector<RubyObjConf>; |
| |
| string line; |
| getline(cfg_output, line) ; |
| while ( !cfg_output.eof() ) { |
| vector<string> tokens = tokenizeString(line, " "); |
| assert(tokens.size() >= 2); |
| vector<string> argv; |
| for (size_t i=2; i<tokens.size(); i++) { |
| replace(tokens[i].begin(), tokens[i].end(), '%', ' '); |
| replace(tokens[i].begin(), tokens[i].end(), '#', '\n'); |
| argv.push_back(tokens[i]); |
| } |
| sys_conf->push_back(RubyObjConf(tokens[0], tokens[1], argv)); |
| tokens.clear(); |
| argv.clear(); |
| getline(cfg_output, line); |
| } |
| |
| RubySystem::create(*sys_conf); |
| delete sys_conf; |
| } |
| #endif |
| |
| RubyPortHandle |
| libruby_get_port(const char* port_name, |
| void (*hit_callback)(int64_t access_id)) |
| { |
| // |
| // Fix me: Hit callback is now a non-static member function pointer of |
| // RubyPort and cannot be set to an arbitrary global function |
| // |
| return NULL;//static_cast<RubyPortHandle>(RubySystem::getPort(port_name, hit_callback)); |
| } |
| |
| RubyPortHandle libruby_get_port_by_name(const char* port_name) |
| { |
| // |
| // Fix me: Ports should now be initialized using the python configuration |
| // system |
| // |
| return NULL;//static_cast<RubyPortHandle>(RubySystem::getPortOnly(port_name)); |
| } |
| |
| void |
| libruby_write_ram(uint64_t paddr, uint8_t* data, int len) |
| { |
| RubySystem::getMemoryVector()->write(Address(paddr), data, len); |
| } |
| |
| void |
| libruby_read_ram(uint64_t paddr, uint8_t* data, int len) |
| { |
| RubySystem::getMemoryVector()->read(Address(paddr), data, len); |
| } |
| |
| int64_t |
| libruby_issue_request(RubyPortHandle p, struct RubyRequest request) |
| { |
| // |
| // Fix me: Ports should now be accessed using the python configuration |
| // system |
| // |
| return 0;//return static_cast<RubyPort*>(p)->makeRequest(request); |
| } |
| |
| int |
| libruby_tick(int n) |
| { |
| RubyEventQueue *eventq = RubySystem::getEventQueue(); |
| eventq->triggerEvents(eventq->getTime() + n); |
| return 0; |
| } |
| |
| void |
| libruby_destroy() |
| { |
| } |
| |
| const char* |
| libruby_last_error() |
| { |
| return ""; |
| } |
| |
| void |
| libruby_print_config(ostream & out) |
| { |
| RubySystem::printConfig(out); |
| } |
| |
| void |
| libruby_print_stats(ostream & out) |
| { |
| RubySystem::printStats(out); |
| } |
| void |
| libruby_playback_trace(char * trace_filename) |
| { |
| RubySystem::getTracer()->playbackTrace(trace_filename); |
| } |
| |
| void |
| libruby_start_tracing(char * record_filename) |
| { |
| // start the trace |
| RubySystem::getTracer()->startTrace(record_filename); |
| } |
| |
| void |
| libruby_stop_tracing() |
| { |
| // start the trace |
| RubySystem::getTracer()->stopTrace(); |
| } |
| |
| uint64_t |
| libruby_get_time() |
| { |
| return RubySystem::getCycleCount(0); |
| } |