system/arm/dt/armv7.dts

/*
 * Copyright (c) 2015-2016, 2019 ARM Limited
 * All rights reserved
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met: redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer;
 * redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution;
 * neither the name of the copyright holders nor the names of its
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/dts-v1/;

/include/ CONF_PLATFORM

#define CPU(n) \
	cpu@ ## n { \
		device_type = "cpu"; \
		compatible = "gem5,arm", "arm,cortex-a15"; \
		reg = < n >; \
	};

/ {
	model = "V2P-CA15";
	compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress";

	memory@80000000 {
		device_type = "memory";
		reg = <0 0x80000000 0x4 0x00000000>;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		#if CONF_CPUS > 0
		CPU(0)
		#endif
		#if CONF_CPUS > 1
		CPU(1)
		#endif
		#if CONF_CPUS > 2
		CPU(2)
		#endif
		#if CONF_CPUS > 3
		CPU(3)
		#endif
		#if CONF_CPUS > 4
		CPU(4)
		#endif
		#if CONF_CPUS > 5
		CPU(5)
		#endif
		#if CONF_CPUS > 6
		CPU(6)
		#endif
		#if CONF_CPUS > 7
		CPU(7)
		#endif
		#if CONF_CPUS > 8
		CPU(8)
		#endif
		#if CONF_CPUS > 9
		CPU(9)
		#endif
		#if CONF_CPUS > 10
		CPU(10)
		#endif
		#if CONF_CPUS > 11
		CPU(11)
		#endif
		#if CONF_CPUS > 12
		CPU(12)
		#endif
		#if CONF_CPUS > 13
		CPU(13)
		#endif
		#if CONF_CPUS > 14
		CPU(14)
		#endif
		#if CONF_CPUS > 15
		CPU(15)
		#endif
		#if CONF_CPUS > 16
		#error Unsupported number of CPUs
		#endif
	};

	virt-encoder {
		compatible = "drm,virtual-encoder";
		port {
			dp0_virt_input: endpoint@0 {
				remote-endpoint = <&dp0_output>;
			};
		};

		display-timings {
			native-mode = <&timing0>;

			timing0: timing_1080p60 {
				/* 1920x1080-60 */
				clock-frequency = <148500000>;
				hactive = <1920>;
				vactive = <1080>;
				hfront-porch = <148>;
				hback-porch = <88>;
				hsync-len = <44>;
				vfront-porch = <36>;
				vback-porch = <4>;
				vsync-len = <5>;
			};
		};
	};
};

&dp0 {
	status = "ok";

	port {
		dp0_output: endpoint@0 {
			remote-endpoint = <&dp0_virt_input>;
		};
	};
};