blob: 5e680a8345b6230d31ac4d2be9b3060719c0c415 [file] [log] [blame]
/*
* Copyright (c) 2012 ARM Limited
* All rights reserved
*
* The license below extends only to copyright in the software and shall
* not be construed as granting a license to any other intellectual
* property including but not limited to intellectual property relating
* to a hardware implementation of the functionality of the software
* licensed hereunder. You may use the software subject to the license
* terms below provided that you ensure that this notice is replicated
* unmodified and in its entirety in all distributions of the software,
* modified or unmodified, in source code or in binary form.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __MEM_ADDR_MAPPER_HH__
#define __MEM_ADDR_MAPPER_HH__
#include "mem/port.hh"
#include "params/AddrMapper.hh"
#include "params/RangeAddrMapper.hh"
#include "sim/sim_object.hh"
/**
* An address mapper changes the packet addresses in going from the
* slave port side of the mapper to the master port side. When the
* slave port is queried for the address ranges, it also performs the
* necessary range updates. Note that snoop requests that travel from
* the master port (i.e. the memory side) to the slave port are
* currently not modified.
*/
class AddrMapper : public SimObject
{
public:
AddrMapper(const AddrMapperParams* params);
virtual ~AddrMapper() { }
Port &getPort(const std::string &if_name,
PortID idx=InvalidPortID) override;
void init() override;
protected:
/**
* This function does the actual remapping of one address to another.
* It is pure virtual in this case to to allow any implementation
* required.
* @param addr the address to remap
* @return the new address (can be unchanged)
*/
virtual Addr remapAddr(Addr addr) const = 0;
class AddrMapperSenderState : public Packet::SenderState
{
public:
/**
* Construct a new sender state to remember the original address.
*
* @param _origAddr Address before remapping
*/
AddrMapperSenderState(Addr _origAddr) : origAddr(_origAddr)
{ }
/** Destructor */
~AddrMapperSenderState() { }
/** The original address the packet was destined for */
Addr origAddr;
};
class MapperMasterPort : public RequestPort
{
public:
MapperMasterPort(const std::string& _name, AddrMapper& _mapper)
: RequestPort(_name, &_mapper), mapper(_mapper)
{ }
protected:
void recvFunctionalSnoop(PacketPtr pkt)
{
mapper.recvFunctionalSnoop(pkt);
}
Tick recvAtomicSnoop(PacketPtr pkt)
{
return mapper.recvAtomicSnoop(pkt);
}
bool recvTimingResp(PacketPtr pkt)
{
return mapper.recvTimingResp(pkt);
}
void recvTimingSnoopReq(PacketPtr pkt)
{
mapper.recvTimingSnoopReq(pkt);
}
void recvRangeChange()
{
mapper.recvRangeChange();
}
bool isSnooping() const
{
return mapper.isSnooping();
}
void recvReqRetry()
{
mapper.recvReqRetry();
}
private:
AddrMapper& mapper;
};
/** Instance of master port, facing the memory side */
MapperMasterPort masterPort;
class MapperSlavePort : public ResponsePort
{
public:
MapperSlavePort(const std::string& _name, AddrMapper& _mapper)
: ResponsePort(_name, &_mapper), mapper(_mapper)
{ }
protected:
void recvFunctional(PacketPtr pkt)
{
mapper.recvFunctional(pkt);
}
Tick recvAtomic(PacketPtr pkt)
{
return mapper.recvAtomic(pkt);
}
bool recvTimingReq(PacketPtr pkt)
{
return mapper.recvTimingReq(pkt);
}
bool recvTimingSnoopResp(PacketPtr pkt)
{
return mapper.recvTimingSnoopResp(pkt);
}
AddrRangeList getAddrRanges() const
{
return mapper.getAddrRanges();
}
void recvRespRetry()
{
mapper.recvRespRetry();
}
private:
AddrMapper& mapper;
};
/** Instance of slave port, i.e. on the CPU side */
MapperSlavePort slavePort;
void recvFunctional(PacketPtr pkt);
void recvFunctionalSnoop(PacketPtr pkt);
Tick recvAtomic(PacketPtr pkt);
Tick recvAtomicSnoop(PacketPtr pkt);
bool recvTimingReq(PacketPtr pkt);
bool recvTimingResp(PacketPtr pkt);
void recvTimingSnoopReq(PacketPtr pkt);
bool recvTimingSnoopResp(PacketPtr pkt);
virtual AddrRangeList getAddrRanges() const = 0;
bool isSnooping() const;
void recvReqRetry();
void recvRespRetry();
void recvRangeChange();
};
/**
* Range address mapper that maps a set of original ranges to a set of
* remapped ranges, where a specific range is of the same size
* (original and remapped), only with an offset. It's useful for cases
* where memory is mapped to two different locations
*/
class RangeAddrMapper : public AddrMapper
{
public:
RangeAddrMapper(const RangeAddrMapperParams* p);
~RangeAddrMapper() { }
AddrRangeList getAddrRanges() const;
protected:
/**
* This contains a list of ranges the should be remapped. It must
* be the exact same length as remappedRanges which describes what
* manipulation should be done to each range.
*/
std::vector<AddrRange> originalRanges;
/**
* This contains a list of ranges that addresses should be
* remapped to. See the description for originalRanges above
*/
std::vector<AddrRange> remappedRanges;
Addr remapAddr(Addr addr) const;
};
#endif //__MEM_ADDR_MAPPER_HH__