configs: Clean setupBootLoader signature
This is because the bus parameter is not used anymore
Change-Id: I27aa8cc064904a6e3e0376f61eb7db74ea1a4d6c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22002
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
diff --git a/configs/common/FSConfig.py b/configs/common/FSConfig.py
index 1a4e381..b34db4e 100644
--- a/configs/common/FSConfig.py
+++ b/configs/common/FSConfig.py
@@ -297,17 +297,7 @@
'lpj=19988480 norandmaps rw loglevel=8 ' + \
'mem=%(mem)s root=%(rootdev)s'
- # When using external memory, gem5 writes the boot loader to nvmem
- # and then SST will read from it, but SST can only get to nvmem from
- # iobus, as gem5's membus is only used for initialization and
- # SST doesn't use it. Attaching nvmem to iobus solves this issue.
- # During initialization, system_port -> membus -> iobus -> nvmem.
- if external_memory:
- self.realview.setupBootLoader(self.iobus, self, binary)
- elif ruby:
- self.realview.setupBootLoader(None, self, binary)
- else:
- self.realview.setupBootLoader(self.membus, self, binary)
+ self.realview.setupBootLoader(self, binary)
if hasattr(self.realview.gic, 'cpu_addr'):
self.gic_cpu_addr = self.realview.gic.cpu_addr
diff --git a/configs/example/arm/fs_bigLITTLE.py b/configs/example/arm/fs_bigLITTLE.py
index 75567e1..36c5963 100644
--- a/configs/example/arm/fs_bigLITTLE.py
+++ b/configs/example/arm/fs_bigLITTLE.py
@@ -142,7 +142,7 @@
for dev in sys.pci_vio_block:
sys.attach_pci(dev)
- sys.realview.setupBootLoader(sys.membus, sys, SysPaths.binary)
+ sys.realview.setupBootLoader(sys, SysPaths.binary)
return sys
diff --git a/configs/example/arm/starter_fs.py b/configs/example/arm/starter_fs.py
index 36c51d6..3a7f298 100644
--- a/configs/example/arm/starter_fs.py
+++ b/configs/example/arm/starter_fs.py
@@ -148,7 +148,7 @@
system.addCaches(want_caches, last_cache_level=2)
# Setup gem5's minimal Linux boot loader.
- system.realview.setupBootLoader(system.membus, system, SysPaths.binary)
+ system.realview.setupBootLoader(system, SysPaths.binary)
if args.dtb:
system.dtb_filename = args.dtb
diff --git a/src/dev/arm/RealView.py b/src/dev/arm/RealView.py
index d24dbe2..6a45d34 100644
--- a/src/dev/arm/RealView.py
+++ b/src/dev/arm/RealView.py
@@ -600,7 +600,7 @@
def attachIO(self, *args, **kwargs):
self._attach_io(self._off_chip_devices(), *args, **kwargs)
- def setupBootLoader(self, mem_bus, cur_sys, loc):
+ def setupBootLoader(self, cur_sys, loc):
cur_sys.boot_loader = loc('boot.arm')
cur_sys.atags_addr = 0x100
cur_sys.load_offset = 0
@@ -751,7 +751,7 @@
self.gicv2m = Gicv2m()
self.gicv2m.frames = [Gicv2mFrame(spi_base=256, spi_len=64, addr=0x2C1C0000)]
- def setupBootLoader(self, mem_bus, cur_sys, loc):
+ def setupBootLoader(self, cur_sys, loc):
if not cur_sys.boot_loader:
cur_sys.boot_loader = loc('boot_emm.arm')
cur_sys.atags_addr = 0x8000000
@@ -766,7 +766,7 @@
conf_base=0x30000000, conf_size='256MB', conf_device_bits=12,
pci_pio_base=0x2f000000)
- def setupBootLoader(self, mem_bus, cur_sys, loc):
+ def setupBootLoader(self, cur_sys, loc):
if not cur_sys.boot_loader:
cur_sys.boot_loader = loc('boot_emm.arm64')
cur_sys.atags_addr = 0x8000000
@@ -951,7 +951,7 @@
device.host = self.pci_host
self._attach_device(device, *args, **kwargs)
- def setupBootLoader(self, mem_bus, cur_sys, loc):
+ def setupBootLoader(self, cur_sys, loc):
if not cur_sys.boot_loader:
cur_sys.boot_loader = [ loc('boot_emm.arm64'), loc('boot_emm.arm') ]
cur_sys.atags_addr = 0x8000000
@@ -1012,9 +1012,9 @@
self.gic, self.gic.its
]
- def setupBootLoader(self, mem_bus, cur_sys, loc):
+ def setupBootLoader(self, cur_sys, loc):
cur_sys.boot_loader = [ loc('boot_emm_v2.arm64') ]
- super(VExpress_GEM5_V2_Base,self).setupBootLoader(mem_bus,
+ super(VExpress_GEM5_V2_Base,self).setupBootLoader(
cur_sys, loc)
class VExpress_GEM5_V2(VExpress_GEM5_V2_Base):
