| /* |
| * Copyright (c) 2017-2020 Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef SRC_SIM_MEM_STATE_HH |
| #define SRC_SIM_MEM_STATE_HH |
| |
| #include <list> |
| #include <memory> |
| #include <string> |
| #include <vector> |
| |
| #include "debug/Vma.hh" |
| #include "mem/page_table.hh" |
| #include "mem/se_translating_port_proxy.hh" |
| #include "sim/serialize.hh" |
| #include "sim/vma.hh" |
| |
| namespace gem5 |
| { |
| |
| class Process; |
| struct ProcessParams; |
| class System; |
| |
| /** |
| * This class holds the memory state for the Process class and all of its |
| * derived, architecture-specific children. |
| * |
| * The class represents the Process' address space which may change |
| * dynamically while the simulation is running. They are updated by system |
| * calls and faults. Each change represents a modification to the process |
| * address space. |
| * |
| * The class is meant to be allocated dynamically and shared through a |
| * pointer interface. Multiple process can potentially share portions of their |
| * virtual address space if specific options are passed into the clone(2) |
| * system call. |
| */ |
| class MemState : public Serializable |
| { |
| public: |
| MemState(Process *owner, Addr brk_point, Addr stack_base, |
| Addr max_stack_size, Addr next_thread_stack_base, |
| Addr mmap_end); |
| |
| MemState& operator=(const MemState &in); |
| |
| /** |
| * Change the Process owner in case this MemState is copied. |
| */ |
| void resetOwner(Process *owner); |
| |
| /** |
| * Get/set base addresses and sizes for the stack and data segments of |
| * the process' memory. |
| */ |
| Addr getBrkPoint() const { return _brkPoint; } |
| Addr getStackBase() const { return _stackBase; } |
| Addr getStackSize() const { return _stackSize; } |
| Addr getMaxStackSize() const { return _maxStackSize; } |
| Addr getStackMin() const { return _stackMin; } |
| Addr getNextThreadStackBase() const { return _nextThreadStackBase; } |
| Addr getMmapEnd() const { return _mmapEnd; } |
| void setBrkPoint(Addr brk_point) { _brkPoint = brk_point; } |
| void setStackBase(Addr stack_base) { _stackBase = stack_base; } |
| void setStackSize(Addr stack_size) { _stackSize = stack_size; } |
| void setMaxStackSize(Addr max_stack) { _maxStackSize = max_stack; } |
| void setStackMin(Addr stack_min) { _stackMin = stack_min; } |
| void setNextThreadStackBase(Addr ntsb) { _nextThreadStackBase = ntsb; } |
| void setMmapEnd(Addr mmap_end) { _mmapEnd = mmap_end; } |
| |
| /* |
| * Extend the end of the mmap region by length bytes. Once a contiguous |
| * region of free virtual memory is found the start of that region is |
| * returned. |
| */ |
| Addr extendMmap(Addr length); |
| |
| /** |
| * Check if any page in the virtual address range from start_addr to |
| * start_addr + length is already mapped in the page table. |
| * |
| * @param start_addr Starting address of region to check. |
| * @param length Length of the range to check. |
| * |
| * @return true if all pages in the range are unmapped in page table |
| */ |
| bool isUnmapped(Addr start_addr, Addr length); |
| |
| /** |
| * Add a new memory region. The region represents a contiguous virtual |
| * address range which can map to physical memory or a host-backed file. |
| * Regions which are not file-backed should use -1 for sim_fd and 0 for |
| * offset. |
| * |
| * @param start_addr Starting address of the region. |
| * @param length Size of the region. |
| * @param name Name of region. Optional. |
| * @param sim_fd File descriptor for file-backed regions or -1. |
| * @param offset Offset in file in which region starts. |
| */ |
| void mapRegion(Addr start_addr, Addr length, |
| const std::string& name="anon", int sim_fd=-1, |
| Addr offset=0); |
| |
| /** |
| * Unmap a pre-existing region. Depending on the range being unmapped |
| * the resulting new regions will either be split, resized, or |
| * removed completely. |
| * |
| * @param start_addr Starting address of region to unmap. |
| * @param length Size of region to unmap. |
| */ |
| void unmapRegion(Addr start_addr, Addr length); |
| |
| /** |
| * Remap a pre-existing region. This changes the virtual address |
| * range of the region. This will result in regions being expanded |
| * if there is overlap with another region or simply moving the range |
| * otherwise. |
| * |
| * @param start_addr Start address of region being remapped. |
| * @param new_start_addr New start address of the region. |
| * @param length Length of the newly remapped region. |
| */ |
| void remapRegion(Addr start_addr, Addr new_start_addr, Addr length); |
| |
| /** |
| * Change the end of a process' program break. This represents the end |
| * of the heap segment of a process. |
| * |
| * @param old_brk Old program break address |
| * @param new_brk New program break address |
| */ |
| void updateBrkRegion(Addr old_brk, Addr new_brk); |
| |
| /** |
| * Attempt to fix up a fault at vaddr by allocating a page. The fault |
| * likely occurred because a virtual page which does not have physical |
| * page assignment is being accessed. |
| * |
| * @param vaddr The virtual address which is causing the fault. |
| * @return Whether the fault has been fixed. |
| */ |
| bool fixupFault(Addr vaddr); |
| |
| /** |
| * Given the vaddr and size, this method will chunk the allocation into |
| * page granularity and then request physical pages (frames) from the |
| * system object. After retrieving a frame, the method updates the page |
| * table mappings. |
| * |
| * @param vaddr The virtual address in need of a frame allocation. |
| * @param size The size in bytes of the requested mapping. |
| * @param clobber This flag specifies whether mappings in the page tables |
| * can be overwritten and replaced with the new mapping. |
| */ |
| void allocateMem(Addr vaddr, int64_t size, bool clobber = false); |
| |
| void |
| serialize(CheckpointOut &cp) const override |
| { |
| paramOut(cp, "brkPoint", _brkPoint); |
| paramOut(cp, "stackBase", _stackBase); |
| paramOut(cp, "stackSize", _stackSize); |
| paramOut(cp, "maxStackSize", _maxStackSize); |
| paramOut(cp, "stackMin", _stackMin); |
| paramOut(cp, "nextThreadStackBase", _nextThreadStackBase); |
| paramOut(cp, "mmapEnd", _mmapEnd); |
| |
| ScopedCheckpointSection sec(cp, "vmalist"); |
| paramOut(cp, "size", _vmaList.size()); |
| int count = 0; |
| for (auto vma : _vmaList) { |
| ScopedCheckpointSection sec(cp, csprintf("Vma%d", count++)); |
| paramOut(cp, "name", vma.getName()); |
| paramOut(cp, "addrRangeStart", vma.start()); |
| paramOut(cp, "addrRangeEnd", vma.end()); |
| } |
| } |
| |
| void |
| unserialize(CheckpointIn &cp) override |
| { |
| paramIn(cp, "brkPoint", _brkPoint); |
| paramIn(cp, "stackBase", _stackBase); |
| paramIn(cp, "stackSize", _stackSize); |
| paramIn(cp, "maxStackSize", _maxStackSize); |
| paramIn(cp, "stackMin", _stackMin); |
| paramIn(cp, "nextThreadStackBase", _nextThreadStackBase); |
| paramIn(cp, "mmapEnd", _mmapEnd); |
| |
| int count; |
| ScopedCheckpointSection sec(cp, "vmalist"); |
| paramIn(cp, "size", count); |
| for (int i = 0; i < count; ++i) { |
| ScopedCheckpointSection sec(cp, csprintf("Vma%d", i)); |
| std::string name; |
| Addr start; |
| Addr end; |
| paramIn(cp, "name", name); |
| paramIn(cp, "addrRangeStart", start); |
| paramIn(cp, "addrRangeEnd", end); |
| _vmaList.emplace_back(AddrRange(start, end), _pageBytes, name); |
| } |
| } |
| |
| /** |
| * Print the list of VMAs in a format similar to /proc/self/maps |
| */ |
| std::string printVmaList(); |
| |
| private: |
| /** |
| * @param |
| */ |
| void replicatePage(const MemState &in, Addr vaddr, Addr new_paddr, |
| bool alloc_page); |
| |
| /** |
| * @param |
| */ |
| System * system() const; |
| |
| /** |
| * Owner process of MemState. Used to manipulate page tables. |
| */ |
| Process * _ownerProcess; |
| |
| Addr _pageBytes; |
| Addr _brkPoint; |
| Addr _stackBase; |
| Addr _stackSize; |
| Addr _maxStackSize; |
| Addr _stackMin; |
| Addr _nextThreadStackBase; |
| Addr _mmapEnd; |
| |
| /** |
| * Keeps record of the furthest mapped heap location. |
| */ |
| Addr _endBrkPoint; |
| |
| /** |
| * The _vmaList member is a list of virtual memory areas in the target |
| * application space that have been allocated by the target. In most |
| * operating systems, lazy allocation is used and these structures (or |
| * equivalent ones) are used to track the valid address ranges. |
| * |
| * This could use a more efficient data structure like an interval |
| * tree, but it is unclear whether the vmas will be modified often enough |
| * for the improvement in lookup time to matter. Unmapping VMAs currently |
| * modifies the list while iterating so the STL container must either |
| * support this or the unmapping method must be changed. |
| */ |
| std::list<VMA> _vmaList; |
| }; |
| |
| } // namespace gem5 |
| |
| #endif |