| /* |
| * Copyright (c) 2010-2015 ARM Limited |
| * All rights reserved |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Copyright (c) 2005 The Regents of The University of Michigan |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Authors: Ali Saidi |
| * Andreas Sandberg |
| */ |
| |
| |
| /** @file |
| * Implementiation of a PL011 UART |
| */ |
| |
| #ifndef __DEV_ARM_PL011_H__ |
| #define __DEV_ARM_PL011_H__ |
| |
| #include "dev/arm/amba_device.hh" |
| #include "dev/serial/uart.hh" |
| |
| class BaseGic; |
| struct Pl011Params; |
| |
| class Pl011 : public Uart, public AmbaDevice |
| { |
| public: |
| Pl011(const Pl011Params *p); |
| |
| void serialize(CheckpointOut &cp) const override; |
| void unserialize(CheckpointIn &cp) override; |
| |
| public: // PioDevice |
| Tick read(PacketPtr pkt) override; |
| Tick write(PacketPtr pkt) override; |
| |
| public: // Uart |
| void dataAvailable() override; |
| |
| |
| protected: // Interrupt handling |
| /** Function to generate interrupt */ |
| void generateInterrupt(); |
| |
| /** |
| * Assign new interrupt values and update interrupt signals |
| * |
| * A new interrupt is scheduled signalled if the set of unmasked |
| * interrupts goes empty to non-empty. Conversely, if the set of |
| * unmasked interrupts goes from non-empty to empty, the interrupt |
| * signal is cleared. |
| * |
| * @param ints New <i>raw</i> interrupt status |
| * @param mask New interrupt mask |
| */ |
| void setInterrupts(uint16_t ints, uint16_t mask); |
| /** |
| * Convenience function to update the interrupt mask |
| * |
| * @see setInterrupts |
| * @param mask New interrupt mask |
| */ |
| void setInterruptMask(uint16_t mask) { setInterrupts(rawInt, mask); } |
| /** |
| * Convenience function to raise a new interrupt |
| * |
| * @see setInterrupts |
| * @param ints Set of interrupts to raise |
| */ |
| void raiseInterrupts(uint16_t ints) { setInterrupts(rawInt | ints, imsc); } |
| /** |
| * Convenience function to clear interrupts |
| * |
| * @see setInterrupts |
| * @param ints Set of interrupts to clear |
| */ |
| void clearInterrupts(uint16_t ints) { setInterrupts(rawInt & ~ints, imsc); } |
| |
| /** Masked interrupt status register */ |
| inline uint16_t maskInt() const { return rawInt & imsc; } |
| |
| /** Wrapper to create an event out of the thing */ |
| EventFunctionWrapper intEvent; |
| |
| protected: // Registers |
| static const uint64_t AMBA_ID = ULL(0xb105f00d00341011); |
| static const int UART_DR = 0x000; |
| static const int UART_RSR = 0x004; |
| static const int UART_ECR = 0x004; |
| static const int UART_FR = 0x018; |
| static const int UART_FR_CTS = 0x001; |
| static const int UART_FR_RXFE = 0x010; |
| static const int UART_FR_TXFF = 0x020; |
| static const int UART_FR_RXFF = 0x040; |
| static const int UART_FR_TXFE = 0x080; |
| static const int UART_IBRD = 0x024; |
| static const int UART_FBRD = 0x028; |
| static const int UART_LCRH = 0x02C; |
| static const int UART_CR = 0x030; |
| static const int UART_IFLS = 0x034; |
| static const int UART_IMSC = 0x038; |
| static const int UART_RIS = 0x03C; |
| static const int UART_MIS = 0x040; |
| static const int UART_ICR = 0x044; |
| static const int UART_DMACR = 0x048; |
| |
| static const uint16_t UART_RIINTR = 1 << 0; |
| static const uint16_t UART_CTSINTR = 1 << 1; |
| static const uint16_t UART_CDCINTR = 1 << 2; |
| static const uint16_t UART_DSRINTR = 1 << 3; |
| static const uint16_t UART_RXINTR = 1 << 4; |
| static const uint16_t UART_TXINTR = 1 << 5; |
| static const uint16_t UART_RTINTR = 1 << 6; |
| static const uint16_t UART_FEINTR = 1 << 7; |
| static const uint16_t UART_PEINTR = 1 << 8; |
| static const uint16_t UART_BEINTR = 1 << 9; |
| static const uint16_t UART_OEINTR = 1 << 10; |
| |
| uint16_t control; |
| |
| /** fractional baud rate divisor. Not used for anything but reporting |
| * written value */ |
| uint16_t fbrd; |
| |
| /** integer baud rate divisor. Not used for anything but reporting |
| * written value */ |
| uint16_t ibrd; |
| |
| /** Line control register. Not used for anything but reporting |
| * written value */ |
| uint16_t lcrh; |
| |
| /** interrupt fifo level register. Not used for anything but reporting |
| * written value */ |
| uint16_t ifls; |
| |
| /** interrupt mask register. */ |
| uint16_t imsc; |
| |
| /** raw interrupt status register */ |
| uint16_t rawInt; |
| |
| protected: // Configuration |
| /** Gic to use for interrupting */ |
| BaseGic * const gic; |
| |
| /** Should the simulation end on an EOT */ |
| const bool endOnEOT; |
| |
| /** Interrupt number to generate */ |
| const int intNum; |
| |
| /** Delay before interrupting */ |
| const Tick intDelay; |
| }; |
| |
| #endif //__DEV_ARM_PL011_H__ |