| /* |
| * Copyright (c) 2008 Princeton University |
| * Copyright (c) 2016 Georgia Institute of Technology |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Authors: Niket Agarwal |
| * Tushar Krishna |
| */ |
| |
| |
| #include "mem/ruby/network/garnet2.0/Router.hh" |
| |
| #include "base/stl_helpers.hh" |
| #include "debug/RubyNetwork.hh" |
| #include "mem/ruby/network/garnet2.0/CreditLink.hh" |
| #include "mem/ruby/network/garnet2.0/CrossbarSwitch.hh" |
| #include "mem/ruby/network/garnet2.0/GarnetNetwork.hh" |
| #include "mem/ruby/network/garnet2.0/InputUnit.hh" |
| #include "mem/ruby/network/garnet2.0/NetworkLink.hh" |
| #include "mem/ruby/network/garnet2.0/OutputUnit.hh" |
| #include "mem/ruby/network/garnet2.0/RoutingUnit.hh" |
| #include "mem/ruby/network/garnet2.0/SwitchAllocator.hh" |
| |
| using namespace std; |
| using m5::stl_helpers::deletePointers; |
| |
| Router::Router(const Params *p) |
| : BasicRouter(p), Consumer(this) |
| { |
| m_latency = p->latency; |
| m_virtual_networks = p->virt_nets; |
| m_vc_per_vnet = p->vcs_per_vnet; |
| m_num_vcs = m_virtual_networks * m_vc_per_vnet; |
| |
| m_routing_unit = new RoutingUnit(this); |
| m_sw_alloc = new SwitchAllocator(this); |
| m_switch = new CrossbarSwitch(this); |
| |
| m_input_unit.clear(); |
| m_output_unit.clear(); |
| } |
| |
| Router::~Router() |
| { |
| deletePointers(m_input_unit); |
| deletePointers(m_output_unit); |
| delete m_routing_unit; |
| delete m_sw_alloc; |
| delete m_switch; |
| } |
| |
| void |
| Router::init() |
| { |
| BasicRouter::init(); |
| |
| m_sw_alloc->init(); |
| m_switch->init(); |
| } |
| |
| void |
| Router::wakeup() |
| { |
| DPRINTF(RubyNetwork, "Router %d woke up\n", m_id); |
| |
| // check for incoming flits |
| for (int inport = 0; inport < m_input_unit.size(); inport++) { |
| m_input_unit[inport]->wakeup(); |
| } |
| |
| // check for incoming credits |
| // Note: the credit update is happening before SA |
| // buffer turnaround time = |
| // credit traversal (1-cycle) + SA (1-cycle) + Link Traversal (1-cycle) |
| // if we want the credit update to take place after SA, this loop should |
| // be moved after the SA request |
| for (int outport = 0; outport < m_output_unit.size(); outport++) { |
| m_output_unit[outport]->wakeup(); |
| } |
| |
| // Switch Allocation |
| m_sw_alloc->wakeup(); |
| |
| // Switch Traversal |
| m_switch->wakeup(); |
| } |
| |
| void |
| Router::addInPort(PortDirection inport_dirn, |
| NetworkLink *in_link, CreditLink *credit_link) |
| { |
| int port_num = m_input_unit.size(); |
| InputUnit *input_unit = new InputUnit(port_num, inport_dirn, this); |
| |
| input_unit->set_in_link(in_link); |
| input_unit->set_credit_link(credit_link); |
| in_link->setLinkConsumer(this); |
| credit_link->setSourceQueue(input_unit->getCreditQueue()); |
| |
| m_input_unit.push_back(input_unit); |
| |
| m_routing_unit->addInDirection(inport_dirn, port_num); |
| } |
| |
| void |
| Router::addOutPort(PortDirection outport_dirn, |
| NetworkLink *out_link, |
| const NetDest& routing_table_entry, int link_weight, |
| CreditLink *credit_link) |
| { |
| int port_num = m_output_unit.size(); |
| OutputUnit *output_unit = new OutputUnit(port_num, outport_dirn, this); |
| |
| output_unit->set_out_link(out_link); |
| output_unit->set_credit_link(credit_link); |
| credit_link->setLinkConsumer(this); |
| out_link->setSourceQueue(output_unit->getOutQueue()); |
| |
| m_output_unit.push_back(output_unit); |
| |
| m_routing_unit->addRoute(routing_table_entry); |
| m_routing_unit->addWeight(link_weight); |
| m_routing_unit->addOutDirection(outport_dirn, port_num); |
| } |
| |
| PortDirection |
| Router::getOutportDirection(int outport) |
| { |
| return m_output_unit[outport]->get_direction(); |
| } |
| |
| PortDirection |
| Router::getInportDirection(int inport) |
| { |
| return m_input_unit[inport]->get_direction(); |
| } |
| |
| int |
| Router::route_compute(RouteInfo route, int inport, PortDirection inport_dirn) |
| { |
| return m_routing_unit->outportCompute(route, inport, inport_dirn); |
| } |
| |
| void |
| Router::grant_switch(int inport, flit *t_flit) |
| { |
| m_switch->update_sw_winner(inport, t_flit); |
| } |
| |
| void |
| Router::schedule_wakeup(Cycles time) |
| { |
| // wake up after time cycles |
| scheduleEvent(time); |
| } |
| |
| std::string |
| Router::getPortDirectionName(PortDirection direction) |
| { |
| // PortDirection is actually a string |
| // If not, then this function should add a switch |
| // statement to convert direction to a string |
| // that can be printed out |
| return direction; |
| } |
| |
| void |
| Router::regStats() |
| { |
| BasicRouter::regStats(); |
| |
| m_buffer_reads |
| .name(name() + ".buffer_reads") |
| .flags(Stats::nozero) |
| ; |
| |
| m_buffer_writes |
| .name(name() + ".buffer_writes") |
| .flags(Stats::nozero) |
| ; |
| |
| m_crossbar_activity |
| .name(name() + ".crossbar_activity") |
| .flags(Stats::nozero) |
| ; |
| |
| m_sw_input_arbiter_activity |
| .name(name() + ".sw_input_arbiter_activity") |
| .flags(Stats::nozero) |
| ; |
| |
| m_sw_output_arbiter_activity |
| .name(name() + ".sw_output_arbiter_activity") |
| .flags(Stats::nozero) |
| ; |
| } |
| |
| void |
| Router::collateStats() |
| { |
| for (int j = 0; j < m_virtual_networks; j++) { |
| for (int i = 0; i < m_input_unit.size(); i++) { |
| m_buffer_reads += m_input_unit[i]->get_buf_read_activity(j); |
| m_buffer_writes += m_input_unit[i]->get_buf_write_activity(j); |
| } |
| } |
| |
| m_sw_input_arbiter_activity = m_sw_alloc->get_input_arbiter_activity(); |
| m_sw_output_arbiter_activity = m_sw_alloc->get_output_arbiter_activity(); |
| m_crossbar_activity = m_switch->get_crossbar_activity(); |
| } |
| |
| void |
| Router::resetStats() |
| { |
| for (int j = 0; j < m_virtual_networks; j++) { |
| for (int i = 0; i < m_input_unit.size(); i++) { |
| m_input_unit[i]->resetStats(); |
| } |
| } |
| |
| m_switch->resetStats(); |
| m_sw_alloc->resetStats(); |
| } |
| |
| void |
| Router::printFaultVector(ostream& out) |
| { |
| int temperature_celcius = BASELINE_TEMPERATURE_CELCIUS; |
| int num_fault_types = m_network_ptr->fault_model->number_of_fault_types; |
| float fault_vector[num_fault_types]; |
| get_fault_vector(temperature_celcius, fault_vector); |
| out << "Router-" << m_id << " fault vector: " << endl; |
| for (int fault_type_index = 0; fault_type_index < num_fault_types; |
| fault_type_index++) { |
| out << " - probability of ("; |
| out << |
| m_network_ptr->fault_model->fault_type_to_string(fault_type_index); |
| out << ") = "; |
| out << fault_vector[fault_type_index] << endl; |
| } |
| } |
| |
| void |
| Router::printAggregateFaultProbability(std::ostream& out) |
| { |
| int temperature_celcius = BASELINE_TEMPERATURE_CELCIUS; |
| float aggregate_fault_prob; |
| get_aggregate_fault_probability(temperature_celcius, |
| &aggregate_fault_prob); |
| out << "Router-" << m_id << " fault probability: "; |
| out << aggregate_fault_prob << endl; |
| } |
| |
| uint32_t |
| Router::functionalWrite(Packet *pkt) |
| { |
| uint32_t num_functional_writes = 0; |
| num_functional_writes += m_switch->functionalWrite(pkt); |
| |
| for (uint32_t i = 0; i < m_input_unit.size(); i++) { |
| num_functional_writes += m_input_unit[i]->functionalWrite(pkt); |
| } |
| |
| for (uint32_t i = 0; i < m_output_unit.size(); i++) { |
| num_functional_writes += m_output_unit[i]->functionalWrite(pkt); |
| } |
| |
| return num_functional_writes; |
| } |
| |
| Router * |
| GarnetRouterParams::create() |
| { |
| return new Router(this); |
| } |