| // -*- mode:c++ -*- | |
| // Copyright (c) 2007 MIPS Technologies, Inc. | |
| // All rights reserved. | |
| // | |
| // Redistribution and use in source and binary forms, with or without | |
| // modification, are permitted provided that the following conditions are | |
| // met: redistributions of source code must retain the above copyright | |
| // notice, this list of conditions and the following disclaimer; | |
| // redistributions in binary form must reproduce the above copyright | |
| // notice, this list of conditions and the following disclaimer in the | |
| // documentation and/or other materials provided with the distribution; | |
| // neither the name of the copyright holders nor the names of its | |
| // contributors may be used to endorse or promote products derived from | |
| // this software without specific prior written permission. | |
| // | |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| //////////////////////////////////////////////////////////////////// | |
| // | |
| // DSP integer operate instructions | |
| // | |
| output header {{ | |
| #include <iostream> | |
| /** | |
| * Base class for integer operations. | |
| */ | |
| class DspIntOp : public MipsStaticInst | |
| { | |
| protected: | |
| /// Constructor | |
| DspIntOp(const char *mnem, MachInst _machInst, OpClass __opClass) : | |
| MipsStaticInst(mnem, _machInst, __opClass) | |
| { | |
| } | |
| }; | |
| class DspHiLoOp : public MipsStaticInst | |
| { | |
| protected: | |
| /// Constructor | |
| DspHiLoOp(const char *mnem, MachInst _machInst, OpClass __opClass) : | |
| MipsStaticInst(mnem, _machInst, __opClass) | |
| { | |
| } | |
| }; | |
| }}; | |
| // Dsp instruction class execute method template. | |
| def template DspExecute {{ | |
| Fault %(class_name)s::execute( | |
| ExecContext *xc, trace::InstRecord *traceData) const | |
| { | |
| Fault fault = NoFault; | |
| %(op_decl)s; | |
| if (isDspPresent(xc)) | |
| { | |
| if (isDspEnabled(xc)) | |
| { | |
| %(op_rd)s; | |
| %(code)s; | |
| } | |
| else | |
| { | |
| fault = std::make_shared<DspStateDisabledFault>(); | |
| } | |
| } | |
| else | |
| { | |
| fault = std::make_shared<ReservedInstructionFault>(); | |
| } | |
| if(fault == NoFault) | |
| { | |
| %(op_wb)s; | |
| } | |
| return fault; | |
| } | |
| }}; | |
| // DspHiLo instruction class execute method template. | |
| def template DspHiLoExecute {{ | |
| Fault %(class_name)s::execute( | |
| ExecContext *xc, trace::InstRecord *traceData) const | |
| { | |
| Fault fault = NoFault; | |
| %(op_decl)s; | |
| if (isDspPresent(xc)) | |
| { | |
| if (isDspEnabled(xc)) | |
| { | |
| %(op_rd)s; | |
| %(code)s; | |
| } | |
| else | |
| { | |
| fault = std::make_shared<DspStateDisabledFault>(); | |
| } | |
| } | |
| else | |
| { | |
| fault = std::make_shared<ReservedInstructionFault>(); | |
| } | |
| if(fault == NoFault) | |
| { | |
| %(op_wb)s; | |
| //If there are 2 Destination Registers then | |
| //concatenate the values for the traceData | |
| if(traceData && _numDestRegs == 2) { | |
| // FIXME - set the trace value correctly here | |
| //uint64_t hilo_final_val = (uint64_t)HI_RD_SEL << 32 | LO_RD_SEL; | |
| //traceData->setData(hilo_final_val); | |
| } | |
| } | |
| return fault; | |
| } | |
| }}; | |
| output header {{ | |
| bool isDspEnabled(ExecContext *xc); | |
| bool isDspPresent(ExecContext *xc); | |
| }}; | |
| //Outputs to decoder.cc | |
| output decoder {{ | |
| }}; | |
| output exec {{ | |
| bool | |
| isDspEnabled(ExecContext *xc) | |
| { | |
| return !FullSystem || bits(xc->readMiscReg(misc_reg::Status), 24); | |
| } | |
| }}; | |
| output exec {{ | |
| bool | |
| isDspPresent(ExecContext *xc) | |
| { | |
| return !FullSystem || bits(xc->readMiscReg(misc_reg::Config3), 10); | |
| } | |
| }}; | |
| // add code to fetch the DSPControl register | |
| // and write it back after execution, giving | |
| // the instruction the opportunity to modify | |
| // it if necessary | |
| def format DspIntOp(code, *opt_flags) {{ | |
| decl_code = 'uint32_t dspctl;\n' | |
| decl_code += 'dspctl = DSPControl;\n' | |
| write_code = 'DSPControl = dspctl;\n' | |
| code = decl_code + code + write_code | |
| iop = InstObjParams(name, Name, 'DspIntOp', code, opt_flags) | |
| header_output = BasicDeclare.subst(iop) | |
| decoder_output = BasicConstructor.subst(iop) | |
| decode_block = BasicDecode.subst(iop) | |
| exec_output = DspExecute.subst(iop) | |
| }}; | |
| // add code to fetch the DSPControl register | |
| // and write it back after execution, giving | |
| // the instruction the opportunity to modify | |
| // it if necessary; also, fetch the appropriate | |
| // HI/LO register pair, based on the AC | |
| // instruction field. | |
| def format DspHiLoOp(code, *opt_flags) {{ | |
| decl_code = 'int64_t dspac;\n' | |
| decl_code += 'uint32_t dspctl;\n' | |
| fetch_code = 'dspctl = DSPControl;\n' | |
| fetch_code += 'dspac = HI_RD_SEL;\n' | |
| fetch_code += 'dspac = dspac << 32 | LO_RD_SEL;\n' | |
| write_code = 'DSPControl = dspctl;\n' | |
| write_code += 'HI_RD_SEL = dspac<63:32>;\n' | |
| write_code += 'LO_RD_SEL = dspac<31:0>;\n' | |
| code = decl_code + fetch_code + code + write_code | |
| iop = InstObjParams(name, Name, 'DspHiLoOp', code, opt_flags) | |
| header_output = BasicDeclare.subst(iop) | |
| decoder_output = BasicConstructor.subst(iop) | |
| decode_block = BasicDecode.subst(iop) | |
| exec_output = DspHiLoExecute.subst(iop) | |
| }}; |