src/arch/x86/bios/IntelMP.py - public/gem5 - Git at Google


            
            # Copyright (c) 2008 The Hewlett-Packard Development Company

            
            # All rights reserved.

            
            #

            
            # The license below extends only to copyright in the software and shall

            
            # not be construed as granting a license to any other intellectual

            
            # property including but not limited to intellectual property relating

            
            # to a hardware implementation of the functionality of the software

            
            # licensed hereunder.  You may use the software subject to the license

            
            # terms below provided that you ensure that this notice is replicated

            
            # unmodified and in its entirety in all distributions of the software,

            
            # modified or unmodified, in source code or in binary form.

            
            #

            
            # Redistribution and use in source and binary forms, with or without

            
            # modification, are permitted provided that the following conditions are

            
            # met: redistributions of source code must retain the above copyright

            
            # notice, this list of conditions and the following disclaimer;

            
            # redistributions in binary form must reproduce the above copyright

            
            # notice, this list of conditions and the following disclaimer in the

            
            # documentation and/or other materials provided with the distribution;

            
            # neither the name of the copyright holders nor the names of its

            
            # contributors may be used to endorse or promote products derived from

            
            # this software without specific prior written permission.

            
            #

            
            # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

            
            # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

            
            # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

            
            # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT

            
            # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

            
            # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

            
            # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

            
            # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

            
            # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

            
            # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

            
            # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.


            from m5.params import *

            
            from m5.SimObject import SimObject


            class X86IntelMPFloatingPointer(SimObject):

            
                type = 'X86IntelMPFloatingPointer'

            
                cxx_class = 'gem5::X86ISA::intelmp::FloatingPointer'

            
                cxx_header = 'arch/x86/bios/intelmp.hh'


                # The minor revision of the spec to support. The major version is assumed

            
                # to be 1 in accordance with the spec.

            
                spec_rev = Param.UInt8(4, 'minor revision of the MP spec supported')

            
                # If no default configuration is used, set this to 0.

            
                default_config = Param.UInt8(0, 'which default configuration to use')

            
                imcr_present = Param.Bool(True,

            
                        'whether the IMCR register is present in the APIC')


            class X86IntelMPConfigTable(SimObject):

            
                type = 'X86IntelMPConfigTable'

            
                cxx_class = 'gem5::X86ISA::intelmp::ConfigTable'

            
                cxx_header = 'arch/x86/bios/intelmp.hh'


                spec_rev = Param.UInt8(4, 'minor revision of the MP spec supported')

            
                oem_id = Param.String("", 'system manufacturer')

            
                product_id = Param.String("", 'product family')

            
                oem_table_addr = Param.UInt32(0,

            
                        'pointer to the optional oem configuration table')

            
                oem_table_size = Param.UInt16(0, 'size of the oem configuration table')

            
                local_apic = Param.UInt32(0xFEE00000, 'address of the local APIC')


                base_entries = VectorParam.X86IntelMPBaseConfigEntry([],

            
                        'base configuration table entries')


                ext_entries = VectorParam.X86IntelMPExtConfigEntry([],

            
                        'extended configuration table entries')


                def add_entry(self, entry):

            
                    if isinstance(entry, X86IntelMPBaseConfigEntry):

            
                        self.base_entries.append(entry)

            
                    elif isinstance(entry, X86IntelMPExtConfigEntry):

            
                        self.ext_entries.append(entry)

            
                    else:

            
                        panic("Don't know what type of Intel MP entry %s is." \

            
                                % entry.__class__.__name__)


            class X86IntelMPBaseConfigEntry(SimObject):

            
                type = 'X86IntelMPBaseConfigEntry'

            
                cxx_class = 'gem5::X86ISA::intelmp::BaseConfigEntry'

            
                cxx_header = 'arch/x86/bios/intelmp.hh'

            
                abstract = True


            class X86IntelMPExtConfigEntry(SimObject):

            
                type = 'X86IntelMPExtConfigEntry'

            
                cxx_class = 'gem5::X86ISA::intelmp::ExtConfigEntry'

            
                cxx_header = 'arch/x86/bios/intelmp.hh'

            
                abstract = True


            class X86IntelMPProcessor(X86IntelMPBaseConfigEntry):

            
                type = 'X86IntelMPProcessor'

            
                cxx_class = 'gem5::X86ISA::intelmp::Processor'

            
                cxx_header = 'arch/x86/bios/intelmp.hh'


                local_apic_id = Param.UInt8(0, 'local APIC id')

            
                local_apic_version = Param.UInt8(0,

            
                        'bits 0-7 of the local APIC version register')

            
                enable = Param.Bool(True, 'if this processor is usable')

            
                bootstrap = Param.Bool(False, 'if this is the bootstrap processor')


                stepping = Param.UInt8(0, 'Processor stepping')

            
                model = Param.UInt8(0, 'Processor model')

            
                family = Param.UInt8(0, 'Processor family')


                feature_flags = Param.UInt32(0, 'flags returned by the CPUID instruction')


            class X86IntelMPBus(X86IntelMPBaseConfigEntry):

            
                type = 'X86IntelMPBus'

            
                cxx_class = 'gem5::X86ISA::intelmp::Bus'

            
                cxx_header = 'arch/x86/bios/intelmp.hh'


                bus_id = Param.UInt8(0, 'bus id assigned by the bios')

            
                bus_type = Param.String("", 'string that identify the bus type')

            
                # Legal values for bus_type are [space padded to 6 bytes]:

            
                #

            
                # "CBUS", "CBUSII", "EISA", "FUTURE", "INTERN", "ISA", "MBI", "MBII",

            
                # "MCA", "MPI", "MPSA", "NUBUS", "PCI", "PCMCIA", "TC", "VL", "VME",

            
                # "XPRESS"


            class X86IntelMPIOAPIC(X86IntelMPBaseConfigEntry):

            
                type = 'X86IntelMPIOAPIC'

            
                cxx_class = 'gem5::X86ISA::intelmp::IOAPIC'

            
                cxx_header = 'arch/x86/bios/intelmp.hh'


                id = Param.UInt8(0, 'id of this APIC')

            
                version = Param.UInt8(0, 'bits 0-7 of the version register')


                enable = Param.Bool(True, 'if this APIC is usable')


                address = Param.UInt32(0xfec00000, 'address of this APIC')


            class X86IntelMPInterruptType(Enum):

            
                map = {'INT' : 0,

            
                       'NMI' : 1,

            
                       'SMI' : 2,

            
                       'ExtInt' : 3

            
                }


            class X86IntelMPPolarity(Enum):

            
                map = {'ConformPolarity' : 0,

            
                       'ActiveHigh' : 1,

            
                       'ActiveLow' : 3

            
                }


            class X86IntelMPTriggerMode(Enum):

            
                map = {'ConformTrigger' : 0,

            
                       'EdgeTrigger' : 1,

            
                       'LevelTrigger' : 3

            
                }


            class X86IntelMPIOIntAssignment(X86IntelMPBaseConfigEntry):

            
                type = 'X86IntelMPIOIntAssignment'

            
                cxx_class = 'gem5::X86ISA::intelmp::IOIntAssignment'

            
                cxx_header = 'arch/x86/bios/intelmp.hh'


                interrupt_type = Param.X86IntelMPInterruptType('INT', 'type of interrupt')


                polarity = Param.X86IntelMPPolarity('ConformPolarity', 'polarity')

            
                trigger = Param.X86IntelMPTriggerMode('ConformTrigger', 'trigger mode')


                source_bus_id = Param.UInt8(0,

            
                        'id of the bus from which the interrupt signal comes')

            
                source_bus_irq = Param.UInt8(0,

            
                        'which interrupt signal from the source bus')


                dest_io_apic_id = Param.UInt8(0,

            
                        'id of the IO APIC the interrupt is going to')

            
                dest_io_apic_intin = Param.UInt8(0,

            
                        'the INTIN pin on the IO APIC the interrupt is connected to')


            class X86IntelMPLocalIntAssignment(X86IntelMPBaseConfigEntry):

            
                type = 'X86IntelMPLocalIntAssignment'

            
                cxx_class = 'gem5::X86ISA::intelmp::LocalIntAssignment'

            
                cxx_header = 'arch/x86/bios/intelmp.hh'


                interrupt_type = Param.X86IntelMPInterruptType('INT', 'type of interrupt')


                polarity = Param.X86IntelMPPolarity('ConformPolarity', 'polarity')

            
                trigger = Param.X86IntelMPTriggerMode('ConformTrigger', 'trigger mode')


                source_bus_id = Param.UInt8(0,

            
                        'id of the bus from which the interrupt signal comes')

            
                source_bus_irq = Param.UInt8(0,

            
                        'which interrupt signal from the source bus')


                dest_local_apic_id = Param.UInt8(0,

            
                        'id of the local APIC the interrupt is going to')

            
                dest_local_apic_intin = Param.UInt8(0,

            
                        'the INTIN pin on the local APIC the interrupt is connected to')


            class X86IntelMPAddressType(Enum):

            
                map = {"IOAddress" : 0,

            
                       "MemoryAddress" : 1,

            
                       "PrefetchAddress" : 2

            
                }


            class X86IntelMPAddrSpaceMapping(X86IntelMPExtConfigEntry):

            
                type = 'X86IntelMPAddrSpaceMapping'

            
                cxx_class = 'gem5::X86ISA::intelmp::AddrSpaceMapping'

            
                cxx_header = 'arch/x86/bios/intelmp.hh'


                bus_id = Param.UInt8(0, 'id of the bus the address space is mapped to')

            
                address_type = Param.X86IntelMPAddressType('IOAddress',

            
                        'address type used to access bus')

            
                address = Param.Addr(0, 'starting address of the mapping')

            
                length = Param.UInt64(0, 'length of mapping in bytes')


            class X86IntelMPBusHierarchy(X86IntelMPExtConfigEntry):

            
                type = 'X86IntelMPBusHierarchy'

            
                cxx_class = 'gem5::X86ISA::intelmp::BusHierarchy'

            
                cxx_header = 'arch/x86/bios/intelmp.hh'


                bus_id = Param.UInt8(0, 'id of the bus being described')

            
                subtractive_decode = Param.Bool(False,

            
                        'whether this bus contains all addresses not used by its children')

            
                parent_bus = Param.UInt8(0, 'bus id of this busses parent')


            class X86IntelMPRangeList(Enum):

            
                map = {"ISACompatible" : 0,

            
                       "VGACompatible" : 1

            
                }


            class X86IntelMPCompatAddrSpaceMod(X86IntelMPExtConfigEntry):

            
                type = 'X86IntelMPCompatAddrSpaceMod'

            
                cxx_class = 'gem5::X86ISA::intelmp::CompatAddrSpaceMod'

            
                cxx_header = 'arch/x86/bios/intelmp.hh'


                bus_id = Param.UInt8(0, 'id of the bus being described')

            
                add = Param.Bool(False,

            
                        'if the range should be added to the original mapping')

            
                range_list = Param.X86IntelMPRangeList('ISACompatible',

            
                        'which predefined range of addresses to use')
	# Copyright (c) 2008 The Hewlett-Packard Development Company
	# All rights reserved.
	#
	# The license below extends only to copyright in the software and shall
	# not be construed as granting a license to any other intellectual
	# property including but not limited to intellectual property relating
	# to a hardware implementation of the functionality of the software
	# licensed hereunder. You may use the software subject to the license
	# terms below provided that you ensure that this notice is replicated
	# unmodified and in its entirety in all distributions of the software,
	# modified or unmodified, in source code or in binary form.
	#
	# Redistribution and use in source and binary forms, with or without
	# modification, are permitted provided that the following conditions are
	# met: redistributions of source code must retain the above copyright
	# notice, this list of conditions and the following disclaimer;
	# redistributions in binary form must reproduce the above copyright
	# notice, this list of conditions and the following disclaimer in the
	# documentation and/or other materials provided with the distribution;
	# neither the name of the copyright holders nor the names of its
	# contributors may be used to endorse or promote products derived from
	# this software without specific prior written permission.
	#
	# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

	from m5.params import *
	from m5.SimObject import SimObject

	class X86IntelMPFloatingPointer(SimObject):
	type = 'X86IntelMPFloatingPointer'
	cxx_class = 'gem5::X86ISA::intelmp::FloatingPointer'
	cxx_header = 'arch/x86/bios/intelmp.hh'

	# The minor revision of the spec to support. The major version is assumed
	# to be 1 in accordance with the spec.
	spec_rev = Param.UInt8(4, 'minor revision of the MP spec supported')
	# If no default configuration is used, set this to 0.
	default_config = Param.UInt8(0, 'which default configuration to use')
	imcr_present = Param.Bool(True,
	'whether the IMCR register is present in the APIC')

	class X86IntelMPConfigTable(SimObject):
	type = 'X86IntelMPConfigTable'
	cxx_class = 'gem5::X86ISA::intelmp::ConfigTable'
	cxx_header = 'arch/x86/bios/intelmp.hh'

	spec_rev = Param.UInt8(4, 'minor revision of the MP spec supported')
	oem_id = Param.String("", 'system manufacturer')
	product_id = Param.String("", 'product family')
	oem_table_addr = Param.UInt32(0,
	'pointer to the optional oem configuration table')
	oem_table_size = Param.UInt16(0, 'size of the oem configuration table')
	local_apic = Param.UInt32(0xFEE00000, 'address of the local APIC')

	base_entries = VectorParam.X86IntelMPBaseConfigEntry([],
	'base configuration table entries')

	ext_entries = VectorParam.X86IntelMPExtConfigEntry([],
	'extended configuration table entries')

	def add_entry(self, entry):
	if isinstance(entry, X86IntelMPBaseConfigEntry):
	self.base_entries.append(entry)
	elif isinstance(entry, X86IntelMPExtConfigEntry):
	self.ext_entries.append(entry)
	else:
	panic("Don't know what type of Intel MP entry %s is." \
	% entry.__class__.__name__)

	class X86IntelMPBaseConfigEntry(SimObject):
	type = 'X86IntelMPBaseConfigEntry'
	cxx_class = 'gem5::X86ISA::intelmp::BaseConfigEntry'
	cxx_header = 'arch/x86/bios/intelmp.hh'
	abstract = True

	class X86IntelMPExtConfigEntry(SimObject):
	type = 'X86IntelMPExtConfigEntry'
	cxx_class = 'gem5::X86ISA::intelmp::ExtConfigEntry'
	cxx_header = 'arch/x86/bios/intelmp.hh'
	abstract = True

	class X86IntelMPProcessor(X86IntelMPBaseConfigEntry):
	type = 'X86IntelMPProcessor'
	cxx_class = 'gem5::X86ISA::intelmp::Processor'
	cxx_header = 'arch/x86/bios/intelmp.hh'

	local_apic_id = Param.UInt8(0, 'local APIC id')
	local_apic_version = Param.UInt8(0,
	'bits 0-7 of the local APIC version register')
	enable = Param.Bool(True, 'if this processor is usable')
	bootstrap = Param.Bool(False, 'if this is the bootstrap processor')

	stepping = Param.UInt8(0, 'Processor stepping')
	model = Param.UInt8(0, 'Processor model')
	family = Param.UInt8(0, 'Processor family')

	feature_flags = Param.UInt32(0, 'flags returned by the CPUID instruction')

	class X86IntelMPBus(X86IntelMPBaseConfigEntry):
	type = 'X86IntelMPBus'
	cxx_class = 'gem5::X86ISA::intelmp::Bus'
	cxx_header = 'arch/x86/bios/intelmp.hh'

	bus_id = Param.UInt8(0, 'bus id assigned by the bios')
	bus_type = Param.String("", 'string that identify the bus type')
	# Legal values for bus_type are [space padded to 6 bytes]:
	#
	# "CBUS", "CBUSII", "EISA", "FUTURE", "INTERN", "ISA", "MBI", "MBII",
	# "MCA", "MPI", "MPSA", "NUBUS", "PCI", "PCMCIA", "TC", "VL", "VME",
	# "XPRESS"

	class X86IntelMPIOAPIC(X86IntelMPBaseConfigEntry):
	type = 'X86IntelMPIOAPIC'
	cxx_class = 'gem5::X86ISA::intelmp::IOAPIC'
	cxx_header = 'arch/x86/bios/intelmp.hh'

	id = Param.UInt8(0, 'id of this APIC')
	version = Param.UInt8(0, 'bits 0-7 of the version register')

	enable = Param.Bool(True, 'if this APIC is usable')

	address = Param.UInt32(0xfec00000, 'address of this APIC')

	class X86IntelMPInterruptType(Enum):
	map = {'INT' : 0,
	'NMI' : 1,
	'SMI' : 2,
	'ExtInt' : 3
	}

	class X86IntelMPPolarity(Enum):
	map = {'ConformPolarity' : 0,
	'ActiveHigh' : 1,
	'ActiveLow' : 3
	}

	class X86IntelMPTriggerMode(Enum):
	map = {'ConformTrigger' : 0,
	'EdgeTrigger' : 1,
	'LevelTrigger' : 3
	}

	class X86IntelMPIOIntAssignment(X86IntelMPBaseConfigEntry):
	type = 'X86IntelMPIOIntAssignment'
	cxx_class = 'gem5::X86ISA::intelmp::IOIntAssignment'
	cxx_header = 'arch/x86/bios/intelmp.hh'

	interrupt_type = Param.X86IntelMPInterruptType('INT', 'type of interrupt')

	polarity = Param.X86IntelMPPolarity('ConformPolarity', 'polarity')
	trigger = Param.X86IntelMPTriggerMode('ConformTrigger', 'trigger mode')

	source_bus_id = Param.UInt8(0,
	'id of the bus from which the interrupt signal comes')
	source_bus_irq = Param.UInt8(0,
	'which interrupt signal from the source bus')

	dest_io_apic_id = Param.UInt8(0,
	'id of the IO APIC the interrupt is going to')
	dest_io_apic_intin = Param.UInt8(0,
	'the INTIN pin on the IO APIC the interrupt is connected to')

	class X86IntelMPLocalIntAssignment(X86IntelMPBaseConfigEntry):
	type = 'X86IntelMPLocalIntAssignment'
	cxx_class = 'gem5::X86ISA::intelmp::LocalIntAssignment'
	cxx_header = 'arch/x86/bios/intelmp.hh'

	interrupt_type = Param.X86IntelMPInterruptType('INT', 'type of interrupt')

	polarity = Param.X86IntelMPPolarity('ConformPolarity', 'polarity')
	trigger = Param.X86IntelMPTriggerMode('ConformTrigger', 'trigger mode')

	source_bus_id = Param.UInt8(0,
	'id of the bus from which the interrupt signal comes')
	source_bus_irq = Param.UInt8(0,
	'which interrupt signal from the source bus')

	dest_local_apic_id = Param.UInt8(0,
	'id of the local APIC the interrupt is going to')
	dest_local_apic_intin = Param.UInt8(0,
	'the INTIN pin on the local APIC the interrupt is connected to')

	class X86IntelMPAddressType(Enum):
	map = {"IOAddress" : 0,
	"MemoryAddress" : 1,
	"PrefetchAddress" : 2
	}

	class X86IntelMPAddrSpaceMapping(X86IntelMPExtConfigEntry):
	type = 'X86IntelMPAddrSpaceMapping'
	cxx_class = 'gem5::X86ISA::intelmp::AddrSpaceMapping'
	cxx_header = 'arch/x86/bios/intelmp.hh'

	bus_id = Param.UInt8(0, 'id of the bus the address space is mapped to')
	address_type = Param.X86IntelMPAddressType('IOAddress',
	'address type used to access bus')
	address = Param.Addr(0, 'starting address of the mapping')
	length = Param.UInt64(0, 'length of mapping in bytes')

	class X86IntelMPBusHierarchy(X86IntelMPExtConfigEntry):
	type = 'X86IntelMPBusHierarchy'
	cxx_class = 'gem5::X86ISA::intelmp::BusHierarchy'
	cxx_header = 'arch/x86/bios/intelmp.hh'

	bus_id = Param.UInt8(0, 'id of the bus being described')
	subtractive_decode = Param.Bool(False,
	'whether this bus contains all addresses not used by its children')
	parent_bus = Param.UInt8(0, 'bus id of this busses parent')

	class X86IntelMPRangeList(Enum):
	map = {"ISACompatible" : 0,
	"VGACompatible" : 1
	}

	class X86IntelMPCompatAddrSpaceMod(X86IntelMPExtConfigEntry):
	type = 'X86IntelMPCompatAddrSpaceMod'
	cxx_class = 'gem5::X86ISA::intelmp::CompatAddrSpaceMod'
	cxx_header = 'arch/x86/bios/intelmp.hh'

	bus_id = Param.UInt8(0, 'id of the bus being described')
	add = Param.Bool(False,
	'if the range should be added to the original mapping')
	range_list = Param.X86IntelMPRangeList('ISACompatible',
	'which predefined range of addresses to use')