| /* | |
| * Copyright (c) 2018 ARM Limited | |
| * | |
| * The license below extends only to copyright in the software and shall | |
| * not be construed as granting a license to any other intellectual | |
| * property including but not limited to intellectual property relating | |
| * to a hardware implementation of the functionality of the software | |
| * licensed hereunder. You may use the software subject to the license | |
| * terms below provided that you ensure that this notice is replicated | |
| * unmodified and in its entirety in all distributions of the software, | |
| * modified or unmodified, in source code or in binary form. | |
| * | |
| * Copyright 2015, 2021 LabWare | |
| * Copyright 2014 Google, Inc. | |
| * Copyright (c) 2002-2005 The Regents of The University of Michigan | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are | |
| * met: redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer; | |
| * redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution; | |
| * neither the name of the copyright holders nor the names of its | |
| * contributors may be used to endorse or promote products derived from | |
| * this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| /* | |
| * Copyright (c) 1990, 1993 The Regents of the University of California | |
| * All rights reserved | |
| * | |
| * This software was developed by the Computer Systems Engineering group | |
| * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and | |
| * contributed to Berkeley. | |
| * | |
| * All advertising materials mentioning features or use of this software | |
| * must display the following acknowledgement: | |
| * This product includes software developed by the University of | |
| * California, Lawrence Berkeley Laboratories. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * 2. Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * 3. All advertising materials mentioning features or use of this software | |
| * must display the following acknowledgement: | |
| * This product includes software developed by the University of | |
| * California, Berkeley and its contributors. | |
| * 4. Neither the name of the University nor the names of its contributors | |
| * may be used to endorse or promote products derived from this software | |
| * without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND | |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE | |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT | |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY | |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | |
| * SUCH DAMAGE. | |
| * | |
| * @(#)kgdb_stub.c 8.4 (Berkeley) 1/12/94 | |
| */ | |
| /*- | |
| * Copyright (c) 2001 The NetBSD Foundation, Inc. | |
| * All rights reserved. | |
| * | |
| * This code is derived from software contributed to The NetBSD Foundation | |
| * by Jason R. Thorpe. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * 2. Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * 3. All advertising materials mentioning features or use of this software | |
| * must display the following acknowledgement: | |
| * This product includes software developed by the NetBSD | |
| * Foundation, Inc. and its contributors. | |
| * 4. Neither the name of The NetBSD Foundation nor the names of its | |
| * contributors may be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS | |
| * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED | |
| * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR | |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS | |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR | |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF | |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS | |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN | |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| /* | |
| * $NetBSD: kgdb_stub.c,v 1.8 2001/07/07 22:58:00 wdk Exp $ | |
| * | |
| * Taken from NetBSD | |
| * | |
| * "Stub" to allow remote cpu to debug over a serial line using gdb. | |
| */ | |
| #include "base/remote_gdb.hh" | |
| #include <sys/signal.h> | |
| #include <unistd.h> | |
| #include <cassert> | |
| #include <csignal> | |
| #include <cstdint> | |
| #include <cstdio> | |
| #include <iterator> | |
| #include <sstream> | |
| #include <string> | |
| #include <utility> | |
| #include "base/cprintf.hh" | |
| #include "base/intmath.hh" | |
| #include "base/logging.hh" | |
| #include "base/socket.hh" | |
| #include "base/trace.hh" | |
| #include "cpu/base.hh" | |
| #include "cpu/static_inst.hh" | |
| #include "cpu/thread_context.hh" | |
| #include "debug/GDBAll.hh" | |
| #include "mem/port.hh" | |
| #include "mem/port_proxy.hh" | |
| #include "mem/se_translating_port_proxy.hh" | |
| #include "mem/translating_port_proxy.hh" | |
| #include "sim/full_system.hh" | |
| #include "sim/process.hh" | |
| #include "sim/system.hh" | |
| namespace gem5 | |
| { | |
| static const char GDBStart = '$'; | |
| static const char GDBEnd = '#'; | |
| static const char GDBGoodP = '+'; | |
| static const char GDBBadP = '-'; | |
| class HardBreakpoint : public PCEvent | |
| { | |
| private: | |
| BaseRemoteGDB *gdb; | |
| public: | |
| int refcount; | |
| public: | |
| HardBreakpoint(BaseRemoteGDB *_gdb, PCEventScope *s, Addr pc) | |
| : PCEvent(s, "HardBreakpoint Event", pc), | |
| gdb(_gdb), refcount(0) | |
| { | |
| DPRINTF(GDBMisc, "creating hardware breakpoint at %#x\n", evpc); | |
| } | |
| const std::string name() const override { return gdb->name() + ".hwbkpt"; } | |
| void | |
| process(ThreadContext *tc) override | |
| { | |
| DPRINTF(GDBMisc, "handling hardware breakpoint at %#x\n", pc()); | |
| if (tc == gdb->tc) | |
| gdb->trap(tc->contextId(), SIGTRAP); | |
| } | |
| }; | |
| namespace { | |
| // Exception to throw when the connection to the client is broken. | |
| struct BadClient | |
| { | |
| const char *warning; | |
| BadClient(const char *_warning=NULL) : warning(_warning) | |
| {} | |
| }; | |
| // Exception to throw when an error needs to be reported to the client. | |
| struct CmdError | |
| { | |
| std::string error; | |
| CmdError(std::string _error) : error(_error) | |
| {} | |
| }; | |
| // Exception to throw when something isn't supported. | |
| class Unsupported {}; | |
| // Convert a hex digit into an integer. | |
| // This returns -1 if the argument passed is no valid hex digit. | |
| int | |
| digit2i(char c) | |
| { | |
| if (c >= '0' && c <= '9') | |
| return (c - '0'); | |
| else if (c >= 'a' && c <= 'f') | |
| return (c - 'a' + 10); | |
| else if (c >= 'A' && c <= 'F') | |
| return (c - 'A' + 10); | |
| else | |
| return -1; | |
| } | |
| // Convert the low 4 bits of an integer into an hex digit. | |
| char | |
| i2digit(int n) | |
| { | |
| return "0123456789abcdef"[n & 0x0f]; | |
| } | |
| // Convert a byte array into an hex string. | |
| void | |
| mem2hex(char *vdst, const char *vsrc, int len) | |
| { | |
| char *dst = vdst; | |
| const char *src = vsrc; | |
| while (len--) { | |
| *dst++ = i2digit(*src >> 4); | |
| *dst++ = i2digit(*src++); | |
| } | |
| *dst = '\0'; | |
| } | |
| // Convert an hex string into a byte array. | |
| // This returns a pointer to the character following the last valid | |
| // hex digit. If the string ends in the middle of a byte, NULL is | |
| // returned. | |
| const char * | |
| hex2mem(char *vdst, const char *src, int max_len) | |
| { | |
| char *dst = vdst; | |
| int msb, lsb; | |
| while (*src && max_len--) { | |
| msb = digit2i(*src++); | |
| if (msb < 0) | |
| return (src - 1); | |
| lsb = digit2i(*src++); | |
| if (lsb < 0) | |
| return (NULL); | |
| *dst++ = (msb << 4) | lsb; | |
| } | |
| return src; | |
| } | |
| // Convert an hex string into an integer. | |
| // This returns a pointer to the character following the last valid | |
| // hex digit. | |
| Addr | |
| hex2i(const char **srcp) | |
| { | |
| const char *src = *srcp; | |
| Addr r = 0; | |
| int nibble; | |
| while ((nibble = digit2i(*src)) >= 0) { | |
| r *= 16; | |
| r += nibble; | |
| src++; | |
| } | |
| *srcp = src; | |
| return r; | |
| } | |
| bool | |
| parseThreadId(const char **srcp, bool &all, bool &any, ContextID &tid) | |
| { | |
| all = any = false; | |
| tid = 0; | |
| const char *src = *srcp; | |
| if (*src == '-') { | |
| // This could be the start of -1, which means all threads. | |
| src++; | |
| if (*src++ != '1') | |
| return false; | |
| *srcp += 2; | |
| all = true; | |
| return true; | |
| } | |
| tid = hex2i(srcp); | |
| // If *srcp still points to src, no characters were consumed and no thread | |
| // id was found. Without this check, we can't tell the difference between | |
| // zero and a parsing error. | |
| if (*srcp == src) | |
| return false; | |
| if (tid == 0) | |
| any = true; | |
| tid--; | |
| return true; | |
| } | |
| int | |
| encodeThreadId(ContextID id) | |
| { | |
| // Thread ID 0 is reserved and means "pick any thread". | |
| return id + 1; | |
| } | |
| enum GdbBreakpointType | |
| { | |
| GdbSoftBp = '0', | |
| GdbHardBp = '1', | |
| GdbWriteWp = '2', | |
| GdbReadWp = '3', | |
| GdbAccWp = '4', | |
| }; | |
| const char * | |
| breakType(char c) | |
| { | |
| switch(c) { | |
| case GdbSoftBp: return "software breakpoint"; | |
| case GdbHardBp: return "hardware breakpoint"; | |
| case GdbWriteWp: return "write watchpoint"; | |
| case GdbReadWp: return "read watchpoint"; | |
| case GdbAccWp: return "access watchpoint"; | |
| default: return "unknown breakpoint/watchpoint"; | |
| } | |
| } | |
| std::map<Addr, HardBreakpoint *> hardBreakMap; | |
| } | |
| BaseRemoteGDB::BaseRemoteGDB(System *_system, int _port) : | |
| incomingConnectionEvent(nullptr), incomingDataEvent(nullptr), | |
| _port(_port), fd(-1), sys(_system), | |
| connectEvent(this), disconnectEvent(this), trapEvent(this), | |
| singleStepEvent(*this) | |
| {} | |
| BaseRemoteGDB::~BaseRemoteGDB() | |
| { | |
| delete incomingConnectionEvent; | |
| delete incomingDataEvent; | |
| } | |
| std::string | |
| BaseRemoteGDB::name() | |
| { | |
| return sys->name() + ".remote_gdb"; | |
| } | |
| void | |
| BaseRemoteGDB::listen() | |
| { | |
| if (ListenSocket::allDisabled()) { | |
| warn_once("Sockets disabled, not accepting gdb connections"); | |
| return; | |
| } | |
| while (!listener.listen(_port, true)) { | |
| DPRINTF(GDBMisc, "Can't bind port %d\n", _port); | |
| _port++; | |
| } | |
| incomingConnectionEvent = | |
| new IncomingConnectionEvent(this, listener.getfd(), POLLIN); | |
| pollQueue.schedule(incomingConnectionEvent); | |
| ccprintf(std::cerr, "%d: %s: listening for remote gdb on port %d\n", | |
| curTick(), name(), _port); | |
| } | |
| void | |
| BaseRemoteGDB::connect() | |
| { | |
| panic_if(!listener.islistening(), | |
| "Can't accept GDB connections without any threads!"); | |
| pollQueue.remove(incomingConnectionEvent); | |
| int sfd = listener.accept(true); | |
| if (sfd != -1) { | |
| if (isAttached()) | |
| close(sfd); | |
| else | |
| attach(sfd); | |
| } | |
| } | |
| int | |
| BaseRemoteGDB::port() const | |
| { | |
| panic_if(!listener.islistening(), | |
| "Remote GDB port is unknown until listen() has been called.\n"); | |
| return _port; | |
| } | |
| void | |
| BaseRemoteGDB::attach(int f) | |
| { | |
| fd = f; | |
| attached = true; | |
| DPRINTFN("remote gdb attached\n"); | |
| processCommands(); | |
| if (isAttached()) { | |
| // At this point an initial communication with GDB is handled | |
| // and we're ready to continue. Here we arrange IncomingDataEvent | |
| // to get notified when GDB breaks in. | |
| // | |
| // However, GDB can decide to disconnect during that initial | |
| // communication. In that case, we cannot arrange data event because | |
| // the socket is already closed (not that it makes any sense, anyways). | |
| // | |
| // Hence the check above. | |
| incomingDataEvent = new IncomingDataEvent(this, fd, POLLIN); | |
| pollQueue.schedule(incomingDataEvent); | |
| } | |
| } | |
| void | |
| BaseRemoteGDB::detach() | |
| { | |
| attached = false; | |
| clearSingleStep(); | |
| close(fd); | |
| fd = -1; | |
| if (incomingDataEvent) { | |
| // incomingDataEvent gets scheduled in attach() after | |
| // initial communication with GDB is handled and GDB tells | |
| // gem5 to continue. | |
| // | |
| // GDB can disconnect before that in which case `incomingDataEvent` | |
| // is NULL. | |
| // | |
| // Hence the check above. | |
| pollQueue.remove(incomingDataEvent); | |
| incomingDataEvent = nullptr; | |
| } | |
| pollQueue.schedule(incomingConnectionEvent); | |
| DPRINTFN("remote gdb detached\n"); | |
| } | |
| void | |
| BaseRemoteGDB::addThreadContext(ThreadContext *_tc) | |
| { | |
| [[maybe_unused]] auto it_success = threads.insert({_tc->contextId(), _tc}); | |
| assert(it_success.second); | |
| // If no ThreadContext is current selected, select this one. | |
| if (!tc) | |
| assert(selectThreadContext(_tc->contextId())); | |
| // Now that we have a thread, we can start listening. | |
| if (!listener.islistening()) | |
| listen(); | |
| } | |
| void | |
| BaseRemoteGDB::replaceThreadContext(ThreadContext *_tc) | |
| { | |
| auto it = threads.find(_tc->contextId()); | |
| panic_if(it == threads.end(), "No context with ID %d found.", | |
| _tc->contextId()); | |
| it->second = _tc; | |
| } | |
| bool | |
| BaseRemoteGDB::selectThreadContext(ContextID id) | |
| { | |
| auto it = threads.find(id); | |
| if (it == threads.end()) | |
| return false; | |
| tc = it->second; | |
| // Update the register cache for the new thread context, if there is one. | |
| if (regCachePtr) | |
| regCachePtr->getRegs(tc); | |
| return true; | |
| } | |
| // This function does all command processing for interfacing to a | |
| // remote gdb. Note that the error codes are ignored by gdb at | |
| // present, but might eventually become meaningful. (XXX) It might | |
| // makes sense to use POSIX errno values, because that is what the | |
| // gdb/remote.c functions want to return. | |
| void | |
| BaseRemoteGDB::trap(ContextID id, int signum) | |
| { | |
| if (!attached) | |
| return; | |
| if (tc->contextId() != id) { | |
| if (!selectThreadContext(id)) | |
| return; | |
| } | |
| DPRINTF(GDBMisc, "trap: PC=%s\n", tc->pcState()); | |
| clearSingleStep(); | |
| if (threadSwitching) { | |
| threadSwitching = false; | |
| // Tell GDB the thread switch has completed. | |
| send("OK"); | |
| } else { | |
| // Tell remote host that an exception has occurred. | |
| send("S%02x", signum); | |
| } | |
| processCommands(signum); | |
| } | |
| void | |
| BaseRemoteGDB::incomingConnection(int revent) | |
| { | |
| if (connectEvent.scheduled()) { | |
| warn("GDB connect event has already been scheduled!"); | |
| return; | |
| } | |
| if (revent & POLLIN) { | |
| scheduleInstCommitEvent(&connectEvent, 0); | |
| } | |
| } | |
| void | |
| BaseRemoteGDB::incomingData(int revent) | |
| { | |
| if (trapEvent.scheduled()) { | |
| warn("GDB trap event has already been scheduled!"); | |
| return; | |
| } | |
| if (revent & POLLIN) { | |
| trapEvent.type(SIGILL); | |
| trapEvent.id(tc->contextId()); | |
| scheduleInstCommitEvent(&trapEvent, 0); | |
| } else if (revent & POLLNVAL) { | |
| descheduleInstCommitEvent(&trapEvent); | |
| scheduleInstCommitEvent(&disconnectEvent, 0); | |
| } | |
| } | |
| uint8_t | |
| BaseRemoteGDB::getbyte() | |
| { | |
| uint8_t b; | |
| if (::read(fd, &b, sizeof(b)) == sizeof(b)) | |
| return b; | |
| throw BadClient("Couldn't read data from debugger."); | |
| } | |
| void | |
| BaseRemoteGDB::putbyte(uint8_t b) | |
| { | |
| if (::write(fd, &b, sizeof(b)) == sizeof(b)) | |
| return; | |
| throw BadClient("Couldn't write data to the debugger."); | |
| } | |
| // Receive a packet from gdb | |
| void | |
| BaseRemoteGDB::recv(std::vector<char>& bp) | |
| { | |
| uint8_t c; | |
| int csum; | |
| bp.resize(0); | |
| do { | |
| csum = 0; | |
| // Find the beginning of a packet | |
| while ((c = getbyte()) != GDBStart); | |
| // Read until you find the end of the data in the packet, and keep | |
| // track of the check sum. | |
| while (true) { | |
| c = getbyte(); | |
| if (c == GDBEnd) | |
| break; | |
| c &= 0x7f; | |
| csum += c; | |
| bp.push_back(c); | |
| } | |
| // Mask the check sum. | |
| csum &= 0xff; | |
| // Bring in the checksum. If the check sum matches, csum will be 0. | |
| csum -= digit2i(getbyte()) * 16; | |
| csum -= digit2i(getbyte()); | |
| // If the check sum was correct | |
| if (csum == 0) { | |
| // Report that the packet was received correctly | |
| putbyte(GDBGoodP); | |
| // Sequence present? | |
| if (bp.size() > 2 && bp[2] == ':') { | |
| putbyte(bp[0]); | |
| putbyte(bp[1]); | |
| auto begin = std::begin(bp); | |
| bp.erase(begin, std::next(begin, 3)); | |
| } | |
| break; | |
| } | |
| // Otherwise, report that there was a mistake. | |
| putbyte(GDBBadP); | |
| } while (1); | |
| // Sentinel. | |
| bp.push_back('\0'); | |
| DPRINTF(GDBRecv, "recv: %s\n", bp.data()); | |
| } | |
| // Send a packet to gdb | |
| void | |
| BaseRemoteGDB::send(const char *bp) | |
| { | |
| const char *p; | |
| uint8_t csum, c; | |
| DPRINTF(GDBSend, "send: %s\n", bp); | |
| do { | |
| p = bp; | |
| // Start sending a packet | |
| putbyte(GDBStart); | |
| // Send the contents, and also keep a check sum. | |
| for (csum = 0; (c = *p); p++) { | |
| putbyte(c); | |
| csum += c; | |
| } | |
| // Send the ending character. | |
| putbyte(GDBEnd); | |
| // Send the checksum. | |
| putbyte(i2digit(csum >> 4)); | |
| putbyte(i2digit(csum)); | |
| // Try transmitting over and over again until the other end doesn't | |
| // send an error back. | |
| c = getbyte(); | |
| } while ((c & 0x7f) == GDBBadP); | |
| } | |
| void | |
| BaseRemoteGDB::processCommands(int signum) | |
| { | |
| // Stick frame regs into our reg cache. | |
| regCachePtr = gdbRegs(); | |
| regCachePtr->getRegs(tc); | |
| GdbCommand::Context cmd_ctx; | |
| cmd_ctx.type = signum; | |
| std::vector<char> data; | |
| for (;;) { | |
| try { | |
| recv(data); | |
| if (data.size() == 1) | |
| throw BadClient(); | |
| cmd_ctx.cmdByte = data[0]; | |
| cmd_ctx.data = data.data() + 1; | |
| // One for sentinel, one for cmdByte. | |
| cmd_ctx.len = data.size() - 2; | |
| auto cmd_it = commandMap.find(cmd_ctx.cmdByte); | |
| if (cmd_it == commandMap.end()) { | |
| DPRINTF(GDBMisc, "Unknown command: %c(%#x)\n", | |
| cmd_ctx.cmdByte, cmd_ctx.cmdByte); | |
| throw Unsupported(); | |
| } | |
| cmd_ctx.cmd = &(cmd_it->second); | |
| if (!(this->*(cmd_ctx.cmd->func))(cmd_ctx)) | |
| break; | |
| } catch (BadClient &e) { | |
| if (e.warning) | |
| warn(e.warning); | |
| detach(); | |
| break; | |
| } catch (Unsupported &e) { | |
| send(""); | |
| } catch (CmdError &e) { | |
| send(e.error); | |
| } catch (std::exception &e) { | |
| panic("Unrecognized GDB exception: %s", e.what()); | |
| } catch (...) { | |
| panic("Unrecognized GDB exception."); | |
| } | |
| } | |
| } | |
| // Read bytes from kernel address space for debugger. | |
| bool | |
| BaseRemoteGDB::read(Addr vaddr, size_t size, char *data) | |
| { | |
| DPRINTF(GDBRead, "read: addr=%#x, size=%d", vaddr, size); | |
| (FullSystem ? TranslatingPortProxy(tc) : SETranslatingPortProxy(tc)). | |
| readBlob(vaddr, data, size); | |
| #if TRACING_ON | |
| if (debug::GDBRead) { | |
| if (debug::GDBExtra) { | |
| char buf[1024]; | |
| mem2hex(buf, data, size); | |
| DPRINTFNR(": %s\n", buf); | |
| } else | |
| DPRINTFNR("\n"); | |
| } | |
| #endif | |
| return true; | |
| } | |
| // Write bytes to kernel address space for debugger. | |
| bool | |
| BaseRemoteGDB::write(Addr vaddr, size_t size, const char *data) | |
| { | |
| if (debug::GDBWrite) { | |
| DPRINTFN("write: addr=%#x, size=%d", vaddr, size); | |
| if (debug::GDBExtra) { | |
| char buf[1024]; | |
| mem2hex(buf, data, size); | |
| DPRINTFNR(": %s\n", buf); | |
| } else | |
| DPRINTFNR("\n"); | |
| } | |
| (FullSystem ? TranslatingPortProxy(tc) : SETranslatingPortProxy(tc)). | |
| writeBlob(vaddr, data, size); | |
| return true; | |
| } | |
| void | |
| BaseRemoteGDB::singleStep() | |
| { | |
| if (!singleStepEvent.scheduled()) | |
| scheduleInstCommitEvent(&singleStepEvent, 1); | |
| trap(tc->contextId(), SIGTRAP); | |
| } | |
| void | |
| BaseRemoteGDB::clearSingleStep() | |
| { | |
| descheduleInstCommitEvent(&singleStepEvent); | |
| } | |
| void | |
| BaseRemoteGDB::setSingleStep() | |
| { | |
| if (!singleStepEvent.scheduled()) | |
| scheduleInstCommitEvent(&singleStepEvent, 1); | |
| } | |
| void | |
| BaseRemoteGDB::insertSoftBreak(Addr addr, size_t kind) | |
| { | |
| if (!checkBpKind(kind)) | |
| throw BadClient("Invalid breakpoint kind.\n"); | |
| return insertHardBreak(addr, kind); | |
| } | |
| void | |
| BaseRemoteGDB::removeSoftBreak(Addr addr, size_t kind) | |
| { | |
| if (!checkBpKind(kind)) | |
| throw BadClient("Invalid breakpoint kind.\n"); | |
| return removeHardBreak(addr, kind); | |
| } | |
| void | |
| BaseRemoteGDB::insertHardBreak(Addr addr, size_t kind) | |
| { | |
| if (!checkBpKind(kind)) | |
| throw BadClient("Invalid breakpoint kind.\n"); | |
| DPRINTF(GDBMisc, "Inserting hardware breakpoint at %#x\n", addr); | |
| HardBreakpoint *&bkpt = hardBreakMap[addr]; | |
| if (bkpt == 0) | |
| bkpt = new HardBreakpoint(this, sys, addr); | |
| bkpt->refcount++; | |
| } | |
| void | |
| BaseRemoteGDB::removeHardBreak(Addr addr, size_t kind) | |
| { | |
| if (!checkBpKind(kind)) | |
| throw BadClient("Invalid breakpoint kind.\n"); | |
| DPRINTF(GDBMisc, "Removing hardware breakpoint at %#x\n", addr); | |
| auto i = hardBreakMap.find(addr); | |
| if (i == hardBreakMap.end()) | |
| throw CmdError("E0C"); | |
| HardBreakpoint *hbp = (*i).second; | |
| if (--hbp->refcount == 0) { | |
| delete hbp; | |
| hardBreakMap.erase(i); | |
| } | |
| } | |
| void | |
| BaseRemoteGDB::scheduleInstCommitEvent(Event *ev, int delta) | |
| { | |
| if (delta == 0 && tc->status() != ThreadContext::Active) { | |
| // If delta is zero, we're just trying to wait for an instruction | |
| // boundary. If the CPU is not active, assume we're already at a | |
| // boundary without waiting for the CPU to eventually wake up. | |
| ev->process(); | |
| } else { | |
| // Here "ticks" aren't simulator ticks which measure time, they're | |
| // instructions committed by the CPU. | |
| tc->scheduleInstCountEvent(ev, tc->getCurrentInstCount() + delta); | |
| } | |
| } | |
| void | |
| BaseRemoteGDB::descheduleInstCommitEvent(Event *ev) | |
| { | |
| if (ev->scheduled()) | |
| tc->descheduleInstCountEvent(ev); | |
| } | |
| std::map<char, BaseRemoteGDB::GdbCommand> BaseRemoteGDB::commandMap = { | |
| // last signal | |
| { '?', { "KGDB_SIGNAL", &BaseRemoteGDB::cmdSignal } }, | |
| // set baud (deprecated) | |
| { 'b', { "KGDB_SET_BAUD", &BaseRemoteGDB::cmdUnsupported } }, | |
| // set breakpoint (deprecated) | |
| { 'B', { "KGDB_SET_BREAK", &BaseRemoteGDB::cmdUnsupported } }, | |
| // resume | |
| { 'c', { "KGDB_CONT", &BaseRemoteGDB::cmdCont } }, | |
| // continue with signal | |
| { 'C', { "KGDB_ASYNC_CONT", &BaseRemoteGDB::cmdAsyncCont } }, | |
| // toggle debug flags (deprecated) | |
| { 'd', { "KGDB_DEBUG", &BaseRemoteGDB::cmdUnsupported } }, | |
| // detach remote gdb | |
| { 'D', { "KGDB_DETACH", &BaseRemoteGDB::cmdDetach } }, | |
| // read general registers | |
| { 'g', { "KGDB_REG_R", &BaseRemoteGDB::cmdRegR } }, | |
| // write general registers | |
| { 'G', { "KGDB_REG_W", &BaseRemoteGDB::cmdRegW } }, | |
| // set thread | |
| { 'H', { "KGDB_SET_THREAD", &BaseRemoteGDB::cmdSetThread } }, | |
| // step a single cycle | |
| { 'i', { "KGDB_CYCLE_STEP", &BaseRemoteGDB::cmdUnsupported } }, | |
| // signal then cycle step | |
| { 'I', { "KGDB_SIG_CYCLE_STEP", &BaseRemoteGDB::cmdUnsupported } }, | |
| // kill program | |
| { 'k', { "KGDB_KILL", &BaseRemoteGDB::cmdDetach } }, | |
| // read memory | |
| { 'm', { "KGDB_MEM_R", &BaseRemoteGDB::cmdMemR } }, | |
| // write memory | |
| { 'M', { "KGDB_MEM_W", &BaseRemoteGDB::cmdMemW } }, | |
| // read register | |
| { 'p', { "KGDB_READ_REG", &BaseRemoteGDB::cmdUnsupported } }, | |
| // write register | |
| { 'P', { "KGDB_SET_REG", &BaseRemoteGDB::cmdUnsupported } }, | |
| // query variable | |
| { 'q', { "KGDB_QUERY_VAR", &BaseRemoteGDB::cmdQueryVar } }, | |
| // set variable | |
| { 'Q', { "KGDB_SET_VAR", &BaseRemoteGDB::cmdUnsupported } }, | |
| // reset system (deprecated) | |
| { 'r', { "KGDB_RESET", &BaseRemoteGDB::cmdUnsupported } }, | |
| // step | |
| { 's', { "KGDB_STEP", &BaseRemoteGDB::cmdStep } }, | |
| // signal and step | |
| { 'S', { "KGDB_ASYNC_STEP", &BaseRemoteGDB::cmdAsyncStep } }, | |
| // find out if the thread is alive | |
| { 'T', { "KGDB_THREAD_ALIVE", &BaseRemoteGDB::cmdUnsupported } }, | |
| // target exited | |
| { 'W', { "KGDB_TARGET_EXIT", &BaseRemoteGDB::cmdUnsupported } }, | |
| // write memory | |
| { 'X', { "KGDB_BINARY_DLOAD", &BaseRemoteGDB::cmdUnsupported } }, | |
| // remove breakpoint or watchpoint | |
| { 'z', { "KGDB_CLR_HW_BKPT", &BaseRemoteGDB::cmdClrHwBkpt } }, | |
| // insert breakpoint or watchpoint | |
| { 'Z', { "KGDB_SET_HW_BKPT", &BaseRemoteGDB::cmdSetHwBkpt } }, | |
| // non-standard RSP extension: dump page table | |
| { '.', { "GET_PAGE_TABLE", &BaseRemoteGDB::cmdDumpPageTable } }, | |
| }; | |
| bool | |
| BaseRemoteGDB::checkBpKind(size_t kind) | |
| { | |
| return true; | |
| } | |
| bool | |
| BaseRemoteGDB::cmdUnsupported(GdbCommand::Context &ctx) | |
| { | |
| DPRINTF(GDBMisc, "Unsupported command: %s\n", ctx.cmd->name); | |
| DDUMP(GDBMisc, ctx.data, ctx.len); | |
| throw Unsupported(); | |
| } | |
| bool | |
| BaseRemoteGDB::cmdSignal(GdbCommand::Context &ctx) | |
| { | |
| send("S%02x", ctx.type); | |
| return true; | |
| } | |
| bool | |
| BaseRemoteGDB::cmdCont(GdbCommand::Context &ctx) | |
| { | |
| const char *p = ctx.data; | |
| if (ctx.len) { | |
| Addr new_pc = hex2i(&p); | |
| tc->pcState(new_pc); | |
| } | |
| clearSingleStep(); | |
| return false; | |
| } | |
| bool | |
| BaseRemoteGDB::cmdAsyncCont(GdbCommand::Context &ctx) | |
| { | |
| const char *p = ctx.data; | |
| hex2i(&p); | |
| if (*p++ == ';') { | |
| Addr new_pc = hex2i(&p); | |
| tc->pcState(new_pc); | |
| } | |
| clearSingleStep(); | |
| return false; | |
| } | |
| bool | |
| BaseRemoteGDB::cmdDetach(GdbCommand::Context &ctx) | |
| { | |
| detach(); | |
| return false; | |
| } | |
| bool | |
| BaseRemoteGDB::cmdRegR(GdbCommand::Context &ctx) | |
| { | |
| char buf[2 * regCachePtr->size() + 1]; | |
| buf[2 * regCachePtr->size()] = '\0'; | |
| mem2hex(buf, regCachePtr->data(), regCachePtr->size()); | |
| send(buf); | |
| return true; | |
| } | |
| bool | |
| BaseRemoteGDB::cmdRegW(GdbCommand::Context &ctx) | |
| { | |
| const char *p = ctx.data; | |
| p = hex2mem(regCachePtr->data(), p, regCachePtr->size()); | |
| if (p == NULL || *p != '\0') | |
| throw CmdError("E01"); | |
| regCachePtr->setRegs(tc); | |
| send("OK"); | |
| return true; | |
| } | |
| bool | |
| BaseRemoteGDB::cmdSetThread(GdbCommand::Context &ctx) | |
| { | |
| const char *p = ctx.data; | |
| char subcommand = *p++; | |
| int tid = 0; | |
| bool all, any; | |
| if (!parseThreadId(&p, all, any, tid)) | |
| throw CmdError("E01"); | |
| if (subcommand == 'c') { | |
| // We can only single step or continue all threads at once, since we | |
| // stop time itself and not individual threads. | |
| if (!all) | |
| throw CmdError("E02"); | |
| } else if (subcommand == 'g') { | |
| // We don't currently support reading registers, memory, etc, from all | |
| // threads at once. GDB may never ask for this, but if it does we | |
| // should complain. | |
| if (all) | |
| throw CmdError("E03"); | |
| // If GDB doesn't care which thread we're using, keep using the | |
| // current one, otherwise switch. | |
| if (!any && tid != tc->contextId()) { | |
| if (!selectThreadContext(tid)) | |
| throw CmdError("E04"); | |
| // Line up on an instruction boundary in the new thread. | |
| threadSwitching = true; | |
| trapEvent.id(tid); | |
| scheduleInstCommitEvent(&trapEvent, 0); | |
| return false; | |
| } | |
| } else { | |
| throw CmdError("E05"); | |
| } | |
| send("OK"); | |
| return true; | |
| } | |
| bool | |
| BaseRemoteGDB::cmdMemR(GdbCommand::Context &ctx) | |
| { | |
| const char *p = ctx.data; | |
| Addr addr = hex2i(&p); | |
| if (*p++ != ',') | |
| throw CmdError("E02"); | |
| size_t len = hex2i(&p); | |
| if (*p != '\0') | |
| throw CmdError("E03"); | |
| if (!acc(addr, len)) | |
| throw CmdError("E05"); | |
| char buf[len]; | |
| if (!read(addr, len, buf)) | |
| throw CmdError("E05"); | |
| char temp[2 * len + 1]; | |
| temp[2 * len] = '\0'; | |
| mem2hex(temp, buf, len); | |
| send(temp); | |
| return true; | |
| } | |
| bool | |
| BaseRemoteGDB::cmdMemW(GdbCommand::Context &ctx) | |
| { | |
| const char *p = ctx.data; | |
| Addr addr = hex2i(&p); | |
| if (*p++ != ',') | |
| throw CmdError("E06"); | |
| size_t len = hex2i(&p); | |
| if (*p++ != ':') | |
| throw CmdError("E07"); | |
| if (len * 2 > ctx.len - (p - ctx.data)) | |
| throw CmdError("E08"); | |
| char buf[len]; | |
| p = (char *)hex2mem(buf, p, len); | |
| if (p == NULL) | |
| throw CmdError("E09"); | |
| if (!acc(addr, len)) | |
| throw CmdError("E0A"); | |
| if (!write(addr, len, buf)) | |
| throw CmdError("E0B"); | |
| send("OK"); | |
| return true; | |
| } | |
| namespace { | |
| std::pair<std::string, std::string> | |
| splitAt(std::string str, const char * const delim) | |
| { | |
| size_t pos = str.find_first_of(delim); | |
| if (pos == std::string::npos) | |
| return std::pair<std::string, std::string>(str, ""); | |
| else | |
| return std::pair<std::string, std::string>( | |
| str.substr(0, pos), str.substr(pos + 1)); | |
| } | |
| } // anonymous namespace | |
| std::map<std::string, BaseRemoteGDB::QuerySetCommand> | |
| BaseRemoteGDB::queryMap = { | |
| { "C", { &BaseRemoteGDB::queryC } }, | |
| { "Supported", { &BaseRemoteGDB::querySupported, ";" } }, | |
| { "Xfer", { &BaseRemoteGDB::queryXfer } }, | |
| { "fThreadInfo", { &BaseRemoteGDB::queryFThreadInfo } }, | |
| { "sThreadInfo", { &BaseRemoteGDB::querySThreadInfo } }, | |
| }; | |
| void | |
| BaseRemoteGDB::queryC(QuerySetCommand::Context &ctx) | |
| { | |
| send("QC%x", encodeThreadId(tc->contextId())); | |
| } | |
| void | |
| BaseRemoteGDB::querySupported(QuerySetCommand::Context &ctx) | |
| { | |
| std::ostringstream oss; | |
| // This reply field mandatory. We can receive arbitrarily | |
| // long packets, so we could choose it to be arbitrarily large. | |
| // This is just an arbitrary filler value that seems to work. | |
| oss << "PacketSize=1024"; | |
| for (const auto& feature : availableFeatures()) | |
| oss << ';' << feature; | |
| send(oss.str()); | |
| } | |
| void | |
| BaseRemoteGDB::queryXfer(QuerySetCommand::Context &ctx) | |
| { | |
| auto split = splitAt(ctx.args.at(0), ":"); | |
| auto object = split.first; | |
| split = splitAt(split.second, ":"); | |
| auto operation = split.first; | |
| // Only the "features" object and "read"ing are supported currently. | |
| if (object != "features" || operation != "read") | |
| throw Unsupported(); | |
| // Extract the annex name. | |
| split = splitAt(split.second, ":"); | |
| auto annex = split.first; | |
| // Read the contents of the annex. | |
| std::string content; | |
| if (!getXferFeaturesRead(annex, content)) | |
| throw CmdError("E00"); | |
| // Extract the offset and length. | |
| split = splitAt(split.second, ","); | |
| auto offset_str = split.first; | |
| auto length_str = split.second; | |
| const char *offset_ptr = offset_str.c_str(); | |
| const char *length_ptr = length_str.c_str(); | |
| auto offset = hex2i(&offset_ptr); | |
| auto length = hex2i(&length_ptr); | |
| if (offset_ptr != offset_str.c_str() + offset_str.length() || | |
| length_ptr != length_str.c_str() + length_str.length()) { | |
| throw CmdError("E00"); | |
| } | |
| std::string encoded; | |
| encodeXferResponse(content, encoded, offset, length); | |
| send(encoded); | |
| } | |
| void | |
| BaseRemoteGDB::queryFThreadInfo(QuerySetCommand::Context &ctx) | |
| { | |
| threadInfoIdx = 0; | |
| querySThreadInfo(ctx); | |
| } | |
| void | |
| BaseRemoteGDB::querySThreadInfo(QuerySetCommand::Context &ctx) | |
| { | |
| if (threadInfoIdx >= threads.size()) { | |
| threadInfoIdx = 0; | |
| send("l"); | |
| } else { | |
| auto it = threads.begin(); | |
| std::advance(it, threadInfoIdx++); | |
| send("m%x", encodeThreadId(it->second->contextId())); | |
| } | |
| } | |
| bool | |
| BaseRemoteGDB::cmdQueryVar(GdbCommand::Context &ctx) | |
| { | |
| // The query command goes until the first ':', or the end of the string. | |
| std::string s(ctx.data, ctx.len); | |
| auto query_split = splitAt({ ctx.data, (size_t)ctx.len }, ":"); | |
| const auto &query_str = query_split.first; | |
| // Look up the query command, and report if it isn't found. | |
| auto query_it = queryMap.find(query_str); | |
| if (query_it == queryMap.end()) { | |
| DPRINTF(GDBMisc, "Unknown query %s\n", s); | |
| throw Unsupported(); | |
| } | |
| // If it was found, construct a context. | |
| QuerySetCommand::Context qctx(query_str); | |
| const auto &query = query_it->second; | |
| auto remaining = std::move(query_split.second); | |
| if (!query.argSep) { | |
| qctx.args.emplace_back(std::move(remaining)); | |
| } else { | |
| while (remaining != "") { | |
| auto arg_split = splitAt(remaining, query.argSep); | |
| qctx.args.emplace_back(std::move(arg_split.first)); | |
| remaining = std::move(arg_split.second); | |
| } | |
| } | |
| (this->*(query.func))(qctx); | |
| return true; | |
| } | |
| std::vector<std::string> | |
| BaseRemoteGDB::availableFeatures() const | |
| { | |
| return {}; | |
| }; | |
| bool | |
| BaseRemoteGDB::getXferFeaturesRead( | |
| const std::string &annex, std::string &output) | |
| { | |
| return false; | |
| } | |
| void | |
| BaseRemoteGDB::encodeBinaryData( | |
| const std::string &unencoded, std::string &encoded) const | |
| { | |
| for (const char& c : unencoded) { | |
| if (c == '$' || c == '#' || c == '}' || c == '*') { | |
| encoded += '}'; | |
| encoded += c ^ 0x20; | |
| } else { | |
| encoded += c; | |
| } | |
| } | |
| } | |
| void | |
| BaseRemoteGDB::encodeXferResponse(const std::string &unencoded, | |
| std::string &encoded, size_t offset, size_t unencoded_length) const | |
| { | |
| if (offset + unencoded_length < unencoded.length()) | |
| encoded += 'm'; | |
| else | |
| encoded += 'l'; | |
| encodeBinaryData(unencoded.substr(offset, unencoded_length), encoded); | |
| } | |
| bool | |
| BaseRemoteGDB::cmdDumpPageTable(GdbCommand::Context &ctx) | |
| { | |
| send(tc->getProcessPtr()->pTable->externalize().c_str()); | |
| return true; | |
| } | |
| bool | |
| BaseRemoteGDB::cmdAsyncStep(GdbCommand::Context &ctx) | |
| { | |
| const char *p = ctx.data; | |
| hex2i(&p); // Ignore the subcommand byte. | |
| if (*p++ == ';') { | |
| Addr new_pc = hex2i(&p); | |
| tc->pcState(new_pc); | |
| } | |
| setSingleStep(); | |
| return false; | |
| } | |
| bool | |
| BaseRemoteGDB::cmdStep(GdbCommand::Context &ctx) | |
| { | |
| if (ctx.len) { | |
| const char *p = ctx.data; | |
| Addr new_pc = hex2i(&p); | |
| tc->pcState(new_pc); | |
| } | |
| setSingleStep(); | |
| return false; | |
| } | |
| bool | |
| BaseRemoteGDB::cmdClrHwBkpt(GdbCommand::Context &ctx) | |
| { | |
| const char *p = ctx.data; | |
| char sub_cmd = *p++; | |
| if (*p++ != ',') | |
| throw CmdError("E0D"); | |
| Addr addr = hex2i(&p); | |
| if (*p++ != ',') | |
| throw CmdError("E0D"); | |
| size_t kind = hex2i(&p); | |
| DPRINTF(GDBMisc, "clear %s, addr=%#x, kind=%d\n", | |
| breakType(sub_cmd), addr, kind); | |
| switch (sub_cmd) { | |
| case GdbSoftBp: | |
| removeSoftBreak(addr, kind); | |
| break; | |
| case GdbHardBp: | |
| removeHardBreak(addr, kind); | |
| break; | |
| case GdbWriteWp: | |
| case GdbReadWp: | |
| case GdbAccWp: | |
| default: // unknown | |
| throw Unsupported(); | |
| } | |
| send("OK"); | |
| return true; | |
| } | |
| bool | |
| BaseRemoteGDB::cmdSetHwBkpt(GdbCommand::Context &ctx) | |
| { | |
| const char *p = ctx.data; | |
| char sub_cmd = *p++; | |
| if (*p++ != ',') | |
| throw CmdError("E0D"); | |
| Addr addr = hex2i(&p); | |
| if (*p++ != ',') | |
| throw CmdError("E0D"); | |
| size_t kind = hex2i(&p); | |
| DPRINTF(GDBMisc, "set %s, addr=%#x, kind=%d\n", | |
| breakType(sub_cmd), addr, kind); | |
| switch (sub_cmd) { | |
| case GdbSoftBp: | |
| insertSoftBreak(addr, kind); | |
| break; | |
| case GdbHardBp: | |
| insertHardBreak(addr, kind); | |
| break; | |
| case GdbWriteWp: | |
| case GdbReadWp: | |
| case GdbAccWp: | |
| default: // unknown | |
| throw Unsupported(); | |
| } | |
| send("OK"); | |
| return true; | |
| } | |
| } // namespace gem5 |