blob: 50415615d23f13945b59ca32b2955136f6230e4e [file] [log] [blame]
/*
* Copyright (c) 2012, 2020, 2022 Arm Limited
* All rights reserved
*
* The license below extends only to copyright in the software and shall
* not be construed as granting a license to any other intellectual
* property including but not limited to intellectual property relating
* to a hardware implementation of the functionality of the software
* licensed hereunder. You may use the software subject to the license
* terms below provided that you ensure that this notice is replicated
* unmodified and in its entirety in all distributions of the software,
* modified or unmodified, in source code or in binary form.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
.text
.globl _start
_start:
/* Save some values initialized by gem5. */
/* DTB address. */
mov x21, x0
/* Kernel entry point. */
mov x20, x3
/* cpu-release-addr. */
mov x22, x5
/*
* EL3 initialisation
*/
mrs x0, CurrentEL
cmp x0, #0xc // EL3?
b.ne start_ns // skip EL3 initialisation
mov x0, #0x30 // RES1
orr x0, x0, #(1 << 0) // Non-secure EL1
orr x0, x0, #(1 << 8) // HVC enable
orr x0, x0, #(1 << 10) // 64-bit EL2
orr x0, x0, #(1 << 16) // Disable FEAT_PAuth traps (APK)
orr x0, x0, #(1 << 17) // Disable FEAT_PAuth traps (API)
msr scr_el3, x0
mov x0, #(1 << 8) // Disable SVE trap to EL3
msr cptr_el3, x0 // Disable copro. traps to EL3
/*
* Check for the primary CPU to avoid a race on the distributor
* registers.
*/
mrs x0, mpidr_el1
// ARM MPIDR_EL1 bytes: Aff3 (AArch64), Stuff, Aff2, Aff1, Aff0
// Test the the MPIDR_EL1 register against 0xff00ffffff to
// extract the primary CPU.
ldr x1, =0xff00ffffff
#ifdef GICV3
tst x0, x1 // check for cpuid==zero
b.ne 3f // secondary CPU
ldr x1, =GIC_DIST_BASE // GICD_CTLR
mov w0, #7 // EnableGrp0 | EnableGrp1NS | EnableGrp1S
str w0, [x1]
mov x2, #0xffe8
ldr w2, [x1, x2] // GICD_PIDR2
and w3, w2, #0xf0 // GICD_PIDR2.Read ArchRev
cmp w3, #0x30 // Check if GICv3
mov w4, #0x20000 // 128KiB redistributor stride
mov w5, #0x40000 // 256KiB redistributor stride
csel w2, w4, w5, eq // Select the correct redistributor stride
ldr x1, =GIC_REDIST_BASE
mov w0, #~0 // Grp1 interrupts
1: ldr w3, [x1, #0x14] // GICR_WAKER
and w3, w3, #~0x2 // Setting GICR_WAKER.ProcessorSleep to 0
str w3, [x1, #0x14]
dsb sy
2: ldr w3, [x1, #0x14] // Re-reading GICR_WAKER
ands w3, w3, #0x4 // Checking GICR_WAKER.ChildrenAsleep
b.ne 2b // Keep reading GICR_WAKER.ChildrenAsleep until awake
add x5, x1, #0x10000 // SGI base
str w0, [x5, #0x80] // GICR_IGROUPR0
ldr w4, [x1, #0x8] // GICR_TYPER
add x1, x1, x2 // Point to next redistributor
// Check GICR_TYPER.Last, which is set to 1
// if this is the last redistributor
ands w4, w4, #0x10
b.eq 1b // Branch back if not last redistributor
ldr x1, =GIC_DIST_BASE + 0x84 // GICD_IGROUPR
str w0, [x1], #4
str w0, [x1], #4
str w0, [x1], #4
/* SRE & Disable IRQ/FIQ Bypass & Allow EL2 access to ICC_SRE_EL2 */
3: mrs x10, S3_6_C12_C12_5 // read ICC_SRE_EL3
orr x10, x10, #0xf // enable 0xf
msr S3_6_C12_C12_5, x10 // write ICC_SRE_EL3
isb
mov x0, #1
msr S3_0_c12_c12_6, x0 // ICC_IGRPEN0_EL1 Enable
msr S3_0_C12_C12_7, x0 // ICC_IGRPEN1_EL1 Enable
#else
tst x0, x1 // check for cpuid==zero
b.ne 1f // secondary CPU
ldr x1, =GIC_DIST_BASE // GICD_CTLR
mov w0, #3 // EnableGrp0 | EnableGrp1
str w0, [x1]
1: ldr x1, =GIC_DIST_BASE + 0x80 // GICD_IGROUPR
mov w0, #~0 // Grp1 interrupts
str w0, [x1], #4
b.ne 2f // Only local interrupts for secondary CPUs
str w0, [x1], #4
str w0, [x1], #4
2: ldr x1, =GIC_CPU_BASE // GICC_CTLR
ldr w0, [x1]
mov w0, #3 // EnableGrp0 | EnableGrp1
str w0, [x1]
mov w0, #1 << 7 // allow NS access to GICC_PMR
str w0, [x1, #4] // GICC_PMR
#endif
msr sctlr_el2, xzr
/*
* Prepare the switch to the EL2_SP1 mode from EL3
*/
ldr x0, =start_ns // Return after mode switch
mov x1, #0x3c9 // EL2_SP1 | D | A | I | F
msr elr_el3, x0
msr spsr_el3, x1
eret
start_ns:
/*
* Kernel parameters
*/
mov x0, xzr
mov x1, xzr
mov x2, xzr
mov x3, xzr
mrs x4, mpidr_el1
// ARM MPIDR_EL1 bytes: Aff3 (AArch64), Stuff, Aff2, Aff1, Aff0
// Test the the MPIDR_EL1 register against 0xff00ffffff to
// extract the primary CPU.
ldr x1, =0xff00ffffff
tst x4, x1 // check for cpuid==zero
mov x1, xzr // load previous 'xzr' value back to x1
b.eq 2f // secondary CPU
/*
* Secondary CPUs
*/
1: wfe
/* The Linux kernel v5.8 and older writes the entry point address
* of the secondary CPUs to this address, and does a SEV, waking up
* the secondary CPUs.
*
* gem5 informs the kernel the desired address via cpu-release-addr
* of the DTB.
*
* When this is first reached immediately after the bootloader starts,
* the value at that address must be 0, which is the default memory
* value set by gem5 for otherwise uninitialized memory, leading to
* WFE.
*/
ldr x4, [x22]
cbz x4, 1b
br x4 // branch to the given address
2:
/*
* UART initialisation (38400 8N1)
*/
ldr x4, =UART_BASE // UART base
mov w5, #0x10 // ibrd
str w5, [x4, #0x24]
mov w5, #0xc300
orr w5, w5, #0x0001 // cr
str w5, [x4, #0x30]
/*
* CLCD output site MB
*/
ldr x4, =SYSREGS_BASE
ldr w5, =(1 << 31) | (1 << 30) | (7 << 20) | (0 << 16) // START|WRITE|MUXFPGA|SITE_MB
str wzr, [x4, #0xa0] // V2M_SYS_CFGDATA
str w5, [x4, #0xa4] // V2M_SYS_CFGCTRL
/*
* Primary CPU
*/
// The kernel boot protocol specifies that the DTB address is placed
// in x0.
// https://github.com/torvalds/linux/blob/v5.7/Documentation/arm64/
// booting.rst#4-call-the-kernel-image
mov x0, x21
// Jump into the kernel entry point.
br x20
.ltorg
.org 0x200