src/sim/serialize.hh - testing/jenkins-gem5-prod - Git at Google

 /*
  * Copyright (c) 2015, 2018 ARM Limited
  * All rights reserved
  *
  * The license below extends only to copyright in the software and shall
  * not be construed as granting a license to any other intellectual
  * property including but not limited to intellectual property relating
  * to a hardware implementation of the functionality of the software
  * licensed hereunder.  You may use the software subject to the license
  * terms below provided that you ensure that this notice is replicated
  * unmodified and in its entirety in all distributions of the software,
  * modified or unmodified, in source code or in binary form.
  *
  * Copyright (c) 2002-2005 The Regents of The University of Michigan
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are
  * met: redistributions of source code must retain the above copyright
  * notice, this list of conditions and the following disclaimer;
  * redistributions in binary form must reproduce the above copyright
  * notice, this list of conditions and the following disclaimer in the
  * documentation and/or other materials provided with the distribution;
  * neither the name of the copyright holders nor the names of its
  * contributors may be used to endorse or promote products derived from
  * this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * Authors: Nathan Binkert
  *          Erik Hallnor
  *          Steve Reinhardt
  *          Andreas Sandberg
  */

 /* @file
  * Serialization Interface Declarations
  */

 #ifndef __SERIALIZE_HH__
 #define __SERIALIZE_HH__


 #include <algorithm>
 #include <iostream>
 #include <list>
 #include <map>
 #include <stack>
 #include <set>
 #include <vector>

 #include "base/bitunion.hh"
 #include "base/logging.hh"
 #include "base/str.hh"

 class IniFile;
 class SimObject;
 class SimObjectResolver;

 typedef std::ostream CheckpointOut;

 class CheckpointIn
 {
   private:

     IniFile *db;

     SimObjectResolver &objNameResolver;

   public:
     CheckpointIn(const std::string &cpt_dir, SimObjectResolver &resolver);
     ~CheckpointIn();

     const std::string cptDir;

     bool find(const std::string &section, const std::string &entry,
               std::string &value);

     bool findObj(const std::string &section, const std::string &entry,
                  SimObject *&value);


     bool entryExists(const std::string &section, const std::string &entry);
     bool sectionExists(const std::string &section);

     // The following static functions have to do with checkpoint
     // creation rather than restoration.  This class makes a handy
     // namespace for them though.  Currently no Checkpoint object is
     // created on serialization (only unserialization) so we track the
     // directory name as a global.  It would be nice to change this
     // someday

   private:
     // current directory we're serializing into.
     static std::string currentDirectory;

   public:
     // Set the current directory.  This function takes care of
     // inserting curTick() if there's a '%d' in the argument, and
     // appends a '/' if necessary.  The final name is returned.
     static std::string setDir(const std::string &base_name);

     // Export current checkpoint directory name so other objects can
     // derive filenames from it (e.g., memory).  The return value is
     // guaranteed to end in '/' so filenames can be directly appended.
     // This function is only valid while a checkpoint is being created.
     static std::string dir();

     // Filename for base checkpoint file within directory.
     static const char *baseFilename;
 };

 /**
  * Basic support for object serialization.
  *
  * Objects that support serialization should derive from this
  * class. Such objects can largely be divided into two categories: 1)
  * True SimObjects (deriving from SimObject), and 2) child objects
  * (non-SimObjects).
  *
  * SimObjects are serialized automatically into their own sections
  * automatically by the SimObject base class (see
  * SimObject::serializeAll().
  *
  * SimObjects can contain other serializable objects that are not
  * SimObjects. Much like normal serialized members are not serialized
  * automatically, these objects will not be serialized automatically
  * and it is expected that the objects owning such serializable
  * objects call the required serialization/unserialization methods on
  * child objects. The preferred method to serialize a child object is
  * to call serializeSection() on the child, which serializes the
  * object into a new subsection in the current section. Another option
  * is to call serialize() directly, which serializes the object into
  * the current section. The latter is not recommended as it can lead
  * to naming clashes between objects.
  *
  * @note Many objects that support serialization need to be put in a
  * consistent state when serialization takes place. We refer to the
  * action of forcing an object into a consistent state as
  * 'draining'. Objects that need draining inherit from Drainable. See
  * Drainable for more information.
  */
 class Serializable
 {
   protected:
     /**
      * Scoped checkpoint section helper class
      *
      * This helper class creates a section within a checkpoint without
      * the need for a separate serializeable object. It is mainly used
      * within the Serializable class when serializing or unserializing
      * section (see serializeSection() and unserializeSection()). It
      * can also be used to maintain backwards compatibility in
      * existing code that serializes structs that are not inheriting
      * from Serializable into subsections.
      *
      * When the class is instantiated, it appends a name to the active
      * path in a checkpoint. The old path is later restored when the
      * instance is destroyed. For example, serializeSection() could be
      * implemented by instantiating a ScopedCheckpointSection and then
      * calling serialize() on an object.
      */
     class ScopedCheckpointSection {
       public:
         template<class CP>
         ScopedCheckpointSection(CP &cp, const char *name) {
             pushName(name);
             nameOut(cp);
         }

         template<class CP>
         ScopedCheckpointSection(CP &cp, const std::string &name) {
             pushName(name.c_str());
             nameOut(cp);
         }

         ~ScopedCheckpointSection();

         ScopedCheckpointSection() = delete;
         ScopedCheckpointSection(const ScopedCheckpointSection &) = delete;
         ScopedCheckpointSection &operator=(
             const ScopedCheckpointSection &) = delete;
         ScopedCheckpointSection &operator=(
             ScopedCheckpointSection &&) = delete;

       private:
         void pushName(const char *name);
         void nameOut(CheckpointOut &cp);
         void nameOut(CheckpointIn &cp) {};
     };

   public:
     Serializable();
     virtual ~Serializable();

     /**
      * Serialize an object
      *
      * Output an object's state into the current checkpoint section.
      *
      * @param cp Checkpoint state
      */
     virtual void serialize(CheckpointOut &cp) const = 0;

     /**
      * Unserialize an object
      *
      * Read an object's state from the current checkpoint section.
      *
      * @param cp Checkpoint state
      */
     virtual void unserialize(CheckpointIn &cp) = 0;

     /**
      * Serialize an object into a new section
      *
      * This method creates a new section in a checkpoint and calls
      * serialize() to serialize the current object into that
      * section. The name of the section is appended to the current
      * checkpoint path.
      *
      * @param cp Checkpoint state
      * @param name Name to append to the active path
      */
     void serializeSection(CheckpointOut &cp, const char *name) const;

     void serializeSection(CheckpointOut &cp, const std::string &name) const {
         serializeSection(cp, name.c_str());
     }

     /**
      * Unserialize an a child object
      *
      * This method loads a child object from a checkpoint. The object
      * name is appended to the active path to form a fully qualified
      * section name and unserialize() is called.
      *
      * @param cp Checkpoint state
      * @param name Name to append to the active path
      */
     void unserializeSection(CheckpointIn &cp, const char *name);

     void unserializeSection(CheckpointIn &cp, const std::string &name) {
         unserializeSection(cp, name.c_str());
     }

     /** Get the fully-qualified name of the active section */
     static const std::string &currentSection();

     static int ckptCount;
     static int ckptMaxCount;
     static int ckptPrevCount;
     static void serializeAll(const std::string &cpt_dir);
     static void unserializeGlobals(CheckpointIn &cp);

   private:
     static std::stack<std::string> path;
 };

 //
 // The base implementations use to_number for parsing and '<<' for
 // displaying, suitable for integer types.
 //
 template <class T>
 bool
 parseParam(const std::string &s, T &value)
 {
     return to_number(s, value);
 }

 template <class T>
 void
 showParam(CheckpointOut &os, const T &value)
 {
     os << value;
 }

 template <class T>
 bool
 parseParam(const std::string &s, BitUnionType<T> &value)
 {
     // Zero initialize storage to avoid leaking an uninitialized value
     BitUnionBaseType<T> storage = BitUnionBaseType<T>();
     auto res = to_number(s, storage);
     value = storage;
     return res;
 }

 template <class T>
 void
 showParam(CheckpointOut &os, const BitUnionType<T> &value)
 {
     auto storage = static_cast<BitUnionBaseType<T>>(value);

     // For a BitUnion8, the storage type is an unsigned char.
     // Since we want to serialize a number we need to cast to
     // unsigned int
     os << ((sizeof(storage) == 1) ?
         static_cast<unsigned int>(storage) : storage);
 }

 // Treat 8-bit ints (chars) as ints on output, not as chars
 template <>
 inline void
 showParam(CheckpointOut &os, const char &value)
 {
     os << (int)value;
 }

 template <>
 inline void
 showParam(CheckpointOut &os, const signed char &value)
 {
     os << (int)value;
 }

 template <>
 inline void
 showParam(CheckpointOut &os, const unsigned char &value)
 {
     os << (unsigned int)value;
 }

 template <>
 inline bool
 parseParam(const std::string &s, float &value)
 {
     return to_number(s, value);
 }

 template <>
 inline bool
 parseParam(const std::string &s, double &value)
 {
     return to_number(s, value);
 }

 template <>
 inline bool
 parseParam(const std::string &s, bool &value)
 {
     return to_bool(s, value);
 }

 // Display bools as strings
 template <>
 inline void
 showParam(CheckpointOut &os, const bool &value)
 {
     os << (value ? "true" : "false");
 }

 // String requires no processing to speak of
 template <>
 inline bool
 parseParam(const std::string &s, std::string &value)
 {
     value = s;
     return true;
 }

 template <class T>
 void
 paramOut(CheckpointOut &os, const std::string &name, const T &param)
 {
     os << name << "=";
     showParam(os, param);
     os << "\n";
 }

 template <class T>
 void
 paramIn(CheckpointIn &cp, const std::string &name, T &param)
 {
     const std::string &section(Serializable::currentSection());
     std::string str;
     if (!cp.find(section, name, str) || !parseParam(str, param)) {
         fatal("Can't unserialize '%s:%s'\n", section, name);
     }
 }

 template <class T>
 bool
 optParamIn(CheckpointIn &cp, const std::string &name,
            T &param, bool warn = true)
 {
     const std::string &section(Serializable::currentSection());
     std::string str;
     if (!cp.find(section, name, str) || !parseParam(str, param)) {
         if (warn)
             warn("optional parameter %s:%s not present\n", section, name);
         return false;
     } else {
         return true;
     }
 }

 template <class T>
 void
 arrayParamOut(CheckpointOut &os, const std::string &name,
               const std::vector<T> &param)
 {
     typename std::vector<T>::size_type size = param.size();
     os << name << "=";
     if (size > 0)
         showParam(os, param[0]);
     for (typename std::vector<T>::size_type i = 1; i < size; ++i) {
         os << " ";
         showParam(os, param[i]);
     }
     os << "\n";
 }

 template <class T>
 void
 arrayParamOut(CheckpointOut &os, const std::string &name,
               const std::list<T> &param)
 {
     typename std::list<T>::const_iterator it = param.begin();

     os << name << "=";
     if (param.size() > 0)
         showParam(os, *it);
     it++;
     while (it != param.end()) {
         os << " ";
         showParam(os, *it);
         it++;
     }
     os << "\n";
 }

 template <class T>
 void
 arrayParamOut(CheckpointOut &os, const std::string &name,
               const std::set<T> &param)
 {
     typename std::set<T>::const_iterator it = param.begin();

     os << name << "=";
     if (param.size() > 0)
         showParam(os, *it);
     it++;
     while (it != param.end()) {
         os << " ";
         showParam(os, *it);
         it++;
     }
     os << "\n";
 }

 template <class T>
 void
 arrayParamOut(CheckpointOut &os, const std::string &name,
               const T *param, unsigned size)
 {
     os << name << "=";
     if (size > 0)
         showParam(os, param[0]);
     for (unsigned i = 1; i < size; ++i) {
         os << " ";
         showParam(os, param[i]);
     }
     os << "\n";
 }


 template <class T>
 void
 arrayParamIn(CheckpointIn &cp, const std::string &name,
              T *param, unsigned size)
 {
     const std::string &section(Serializable::currentSection());
     std::string str;
     if (!cp.find(section, name, str)) {
         fatal("Can't unserialize '%s:%s'\n", section, name);
     }

     // code below stolen from VectorParam<T>::parse().
     // it would be nice to unify these somehow...

     std::vector<std::string> tokens;

     tokenize(tokens, str, ' ');

     // Need this if we were doing a vector
     // value.resize(tokens.size());

     if (tokens.size() != size) {
         fatal("Array size mismatch on %s:%s'\n", section, name);
     }

     for (std::vector<std::string>::size_type i = 0; i < tokens.size(); i++) {
         // need to parse into local variable to handle vector<bool>,
         // for which operator[] returns a special reference class
         // that's not the same as 'bool&', (since it's a packed
         // vector)
         T scalar_value;
         if (!parseParam(tokens[i], scalar_value)) {
             std::string err("could not parse \"");

             err += str;
             err += "\"";

             fatal(err);
         }

         // assign parsed value to vector
         param[i] = scalar_value;
     }
 }

 template <class T>
 void
 arrayParamIn(CheckpointIn &cp, const std::string &name, std::vector<T> &param)
 {
     const std::string &section(Serializable::currentSection());
     std::string str;
     if (!cp.find(section, name, str)) {
         fatal("Can't unserialize '%s:%s'\n", section, name);
     }

     // code below stolen from VectorParam<T>::parse().
     // it would be nice to unify these somehow...

     std::vector<std::string> tokens;

     tokenize(tokens, str, ' ');

     // Need this if we were doing a vector
     // value.resize(tokens.size());

     param.resize(tokens.size());

     for (std::vector<std::string>::size_type i = 0; i < tokens.size(); i++) {
         // need to parse into local variable to handle vector<bool>,
         // for which operator[] returns a special reference class
         // that's not the same as 'bool&', (since it's a packed
         // vector)
         T scalar_value;
         if (!parseParam(tokens[i], scalar_value)) {
             std::string err("could not parse \"");

             err += str;
             err += "\"";

             fatal(err);
         }

         // assign parsed value to vector
         param[i] = scalar_value;
     }
 }

 template <class T>
 void
 arrayParamIn(CheckpointIn &cp, const std::string &name, std::list<T> &param)
 {
     const std::string &section(Serializable::currentSection());
     std::string str;
     if (!cp.find(section, name, str)) {
         fatal("Can't unserialize '%s:%s'\n", section, name);
     }
     param.clear();

     std::vector<std::string> tokens;
     tokenize(tokens, str, ' ');

     for (std::vector<std::string>::size_type i = 0; i < tokens.size(); i++) {
         T scalar_value;
         if (!parseParam(tokens[i], scalar_value)) {
             std::string err("could not parse \"");

             err += str;
             err += "\"";

             fatal(err);
         }

         // assign parsed value to vector
         param.push_back(scalar_value);
     }
 }

 template <class T>
 void
 arrayParamIn(CheckpointIn &cp, const std::string &name, std::set<T> &param)
 {
     const std::string &section(Serializable::currentSection());
     std::string str;
     if (!cp.find(section, name, str)) {
         fatal("Can't unserialize '%s:%s'\n", section, name);
     }
     param.clear();

     std::vector<std::string> tokens;
     tokenize(tokens, str, ' ');

     for (std::vector<std::string>::size_type i = 0; i < tokens.size(); i++) {
         T scalar_value;
         if (!parseParam(tokens[i], scalar_value)) {
             std::string err("could not parse \"");

             err += str;
             err += "\"";

             fatal(err);
         }

         // assign parsed value to vector
         param.insert(scalar_value);
     }
 }

 void
 debug_serialize(const std::string &cpt_dir);

 void
 objParamIn(CheckpointIn &cp, const std::string &name, SimObject * &param);

 //
 // These macros are streamlined to use in serialize/unserialize
 // functions.  It's assumed that serialize() has a parameter 'os' for
 // the ostream, and unserialize() has parameters 'cp' and 'section'.
 #define SERIALIZE_SCALAR(scalar)        paramOut(cp, #scalar, scalar)

 #define UNSERIALIZE_SCALAR(scalar)      paramIn(cp, #scalar, scalar)
 #define UNSERIALIZE_OPT_SCALAR(scalar)      optParamIn(cp, #scalar, scalar)

 // ENUMs are like SCALARs, but we cast them to ints on the way out
 #define SERIALIZE_ENUM(scalar)          paramOut(cp, #scalar, (int)scalar)

 #define UNSERIALIZE_ENUM(scalar)                        \
     do {                                                \
         int tmp;                                        \
         paramIn(cp, #scalar, tmp);                      \
         scalar = static_cast<decltype(scalar)>(tmp);    \
     } while (0)

 #define SERIALIZE_ARRAY(member, size)           \
         arrayParamOut(cp, #member, member, size)

 #define UNSERIALIZE_ARRAY(member, size)         \
         arrayParamIn(cp, #member, member, size)

 #define SERIALIZE_CONTAINER(member)             \
         arrayParamOut(cp, #member, member)

 #define UNSERIALIZE_CONTAINER(member)           \
         arrayParamIn(cp, #member, member)

 #define SERIALIZE_EVENT(event) event.serializeSection(cp, #event);

 #define UNSERIALIZE_EVENT(event)                        \
     do {                                                \
         event.unserializeSection(cp, #event);           \
         eventQueue()->checkpointReschedule(&event);     \
     } while (0)

 #define SERIALIZE_OBJ(obj) obj.serializeSection(cp, #obj)
 #define UNSERIALIZE_OBJ(obj) obj.unserializeSection(cp, #obj)

 #define SERIALIZE_OBJPTR(objptr)        paramOut(cp, #objptr, (objptr)->name())

 #define UNSERIALIZE_OBJPTR(objptr)                      \
     do {                                                \
         SimObject *sptr;                                \
         objParamIn(cp, #objptr, sptr);                  \
         objptr = dynamic_cast<decltype(objptr)>(sptr);  \
     } while (0)

 #endif // __SERIALIZE_HH__
	/*
	* Copyright (c) 2015, 2018 ARM Limited
	* All rights reserved
	*
	* The license below extends only to copyright in the software and shall
	* not be construed as granting a license to any other intellectual
	* property including but not limited to intellectual property relating
	* to a hardware implementation of the functionality of the software
	* licensed hereunder. You may use the software subject to the license
	* terms below provided that you ensure that this notice is replicated
	* unmodified and in its entirety in all distributions of the software,
	* modified or unmodified, in source code or in binary form.
	*
	* Copyright (c) 2002-2005 The Regents of The University of Michigan
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are
	* met: redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer;
	* redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution;
	* neither the name of the copyright holders nor the names of its
	* contributors may be used to endorse or promote products derived from
	* this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*
	* Authors: Nathan Binkert
	* Erik Hallnor
	* Steve Reinhardt
	* Andreas Sandberg
	*/

	/* @file
	* Serialization Interface Declarations
	*/

	#ifndef __SERIALIZE_HH__
	#define __SERIALIZE_HH__


	#include <algorithm>
	#include <iostream>
	#include <list>
	#include <map>
	#include <stack>
	#include <set>
	#include <vector>

	#include "base/bitunion.hh"
	#include "base/logging.hh"
	#include "base/str.hh"

	class IniFile;
	class SimObject;
	class SimObjectResolver;

	typedef std::ostream CheckpointOut;

	class CheckpointIn
	{
	private:

	IniFile *db;

	SimObjectResolver &objNameResolver;

	public:
	CheckpointIn(const std::string &cpt_dir, SimObjectResolver &resolver);
	~CheckpointIn();

	const std::string cptDir;

	bool find(const std::string &section, const std::string &entry,
	std::string &value);

	bool findObj(const std::string &section, const std::string &entry,
	SimObject *&value);


	bool entryExists(const std::string &section, const std::string &entry);
	bool sectionExists(const std::string &section);

	// The following static functions have to do with checkpoint
	// creation rather than restoration. This class makes a handy
	// namespace for them though. Currently no Checkpoint object is
	// created on serialization (only unserialization) so we track the
	// directory name as a global. It would be nice to change this
	// someday

	private:
	// current directory we're serializing into.
	static std::string currentDirectory;

	public:
	// Set the current directory. This function takes care of
	// inserting curTick() if there's a '%d' in the argument, and
	// appends a '/' if necessary. The final name is returned.
	static std::string setDir(const std::string &base_name);

	// Export current checkpoint directory name so other objects can
	// derive filenames from it (e.g., memory). The return value is
	// guaranteed to end in '/' so filenames can be directly appended.
	// This function is only valid while a checkpoint is being created.
	static std::string dir();

	// Filename for base checkpoint file within directory.
	static const char *baseFilename;
	};

	/**
	* Basic support for object serialization.
	*
	* Objects that support serialization should derive from this
	* class. Such objects can largely be divided into two categories: 1)
	* True SimObjects (deriving from SimObject), and 2) child objects
	* (non-SimObjects).
	*
	* SimObjects are serialized automatically into their own sections
	* automatically by the SimObject base class (see
	* SimObject::serializeAll().
	*
	* SimObjects can contain other serializable objects that are not
	* SimObjects. Much like normal serialized members are not serialized
	* automatically, these objects will not be serialized automatically
	* and it is expected that the objects owning such serializable
	* objects call the required serialization/unserialization methods on
	* child objects. The preferred method to serialize a child object is
	* to call serializeSection() on the child, which serializes the
	* object into a new subsection in the current section. Another option
	* is to call serialize() directly, which serializes the object into
	* the current section. The latter is not recommended as it can lead
	* to naming clashes between objects.
	*
	* @note Many objects that support serialization need to be put in a
	* consistent state when serialization takes place. We refer to the
	* action of forcing an object into a consistent state as
	* 'draining'. Objects that need draining inherit from Drainable. See
	* Drainable for more information.
	*/
	class Serializable
	{
	protected:
	/**
	* Scoped checkpoint section helper class
	*
	* This helper class creates a section within a checkpoint without
	* the need for a separate serializeable object. It is mainly used
	* within the Serializable class when serializing or unserializing
	* section (see serializeSection() and unserializeSection()). It
	* can also be used to maintain backwards compatibility in
	* existing code that serializes structs that are not inheriting
	* from Serializable into subsections.
	*
	* When the class is instantiated, it appends a name to the active
	* path in a checkpoint. The old path is later restored when the
	* instance is destroyed. For example, serializeSection() could be
	* implemented by instantiating a ScopedCheckpointSection and then
	* calling serialize() on an object.
	*/
	class ScopedCheckpointSection {
	public:
	template<class CP>
	ScopedCheckpointSection(CP &cp, const char *name) {
	pushName(name);
	nameOut(cp);
	}

	template<class CP>
	ScopedCheckpointSection(CP &cp, const std::string &name) {
	pushName(name.c_str());
	nameOut(cp);
	}

	~ScopedCheckpointSection();

	ScopedCheckpointSection() = delete;
	ScopedCheckpointSection(const ScopedCheckpointSection &) = delete;
	ScopedCheckpointSection &operator=(
	const ScopedCheckpointSection &) = delete;
	ScopedCheckpointSection &operator=(
	ScopedCheckpointSection &&) = delete;

	private:
	void pushName(const char *name);
	void nameOut(CheckpointOut &cp);
	void nameOut(CheckpointIn &cp) {};
	};

	public:
	Serializable();
	virtual ~Serializable();

	/**
	* Serialize an object
	*
	* Output an object's state into the current checkpoint section.
	*
	* @param cp Checkpoint state
	*/
	virtual void serialize(CheckpointOut &cp) const = 0;

	/**
	* Unserialize an object
	*
	* Read an object's state from the current checkpoint section.
	*
	* @param cp Checkpoint state
	*/
	virtual void unserialize(CheckpointIn &cp) = 0;

	/**
	* Serialize an object into a new section
	*
	* This method creates a new section in a checkpoint and calls
	* serialize() to serialize the current object into that
	* section. The name of the section is appended to the current
	* checkpoint path.
	*
	* @param cp Checkpoint state
	* @param name Name to append to the active path
	*/
	void serializeSection(CheckpointOut &cp, const char *name) const;

	void serializeSection(CheckpointOut &cp, const std::string &name) const {
	serializeSection(cp, name.c_str());
	}

	/**
	* Unserialize an a child object
	*
	* This method loads a child object from a checkpoint. The object
	* name is appended to the active path to form a fully qualified
	* section name and unserialize() is called.
	*
	* @param cp Checkpoint state
	* @param name Name to append to the active path
	*/
	void unserializeSection(CheckpointIn &cp, const char *name);

	void unserializeSection(CheckpointIn &cp, const std::string &name) {
	unserializeSection(cp, name.c_str());
	}

	/** Get the fully-qualified name of the active section */
	static const std::string &currentSection();

	static int ckptCount;
	static int ckptMaxCount;
	static int ckptPrevCount;
	static void serializeAll(const std::string &cpt_dir);
	static void unserializeGlobals(CheckpointIn &cp);

	private:
	static std::stack<std::string> path;
	};

	//
	// The base implementations use to_number for parsing and '<<' for
	// displaying, suitable for integer types.
	//
	template <class T>
	bool
	parseParam(const std::string &s, T &value)
	{
	return to_number(s, value);
	}

	template <class T>
	void
	showParam(CheckpointOut &os, const T &value)
	{
	os << value;
	}

	template <class T>
	bool
	parseParam(const std::string &s, BitUnionType<T> &value)
	{
	// Zero initialize storage to avoid leaking an uninitialized value
	BitUnionBaseType<T> storage = BitUnionBaseType<T>();
	auto res = to_number(s, storage);
	value = storage;
	return res;
	}

	template <class T>
	void
	showParam(CheckpointOut &os, const BitUnionType<T> &value)
	{
	auto storage = static_cast<BitUnionBaseType<T>>(value);

	// For a BitUnion8, the storage type is an unsigned char.
	// Since we want to serialize a number we need to cast to
	// unsigned int
	os << ((sizeof(storage) == 1) ?
	static_cast<unsigned int>(storage) : storage);
	}

	// Treat 8-bit ints (chars) as ints on output, not as chars
	template <>
	inline void
	showParam(CheckpointOut &os, const char &value)
	{
	os << (int)value;
	}

	template <>
	inline void
	showParam(CheckpointOut &os, const signed char &value)
	{
	os << (int)value;
	}

	template <>
	inline void
	showParam(CheckpointOut &os, const unsigned char &value)
	{
	os << (unsigned int)value;
	}

	template <>
	inline bool
	parseParam(const std::string &s, float &value)
	{
	return to_number(s, value);
	}

	template <>
	inline bool
	parseParam(const std::string &s, double &value)
	{
	return to_number(s, value);
	}

	template <>
	inline bool
	parseParam(const std::string &s, bool &value)
	{
	return to_bool(s, value);
	}

	// Display bools as strings
	template <>
	inline void
	showParam(CheckpointOut &os, const bool &value)
	{
	os << (value ? "true" : "false");
	}

	// String requires no processing to speak of
	template <>
	inline bool
	parseParam(const std::string &s, std::string &value)
	{
	value = s;
	return true;
	}

	template <class T>
	void
	paramOut(CheckpointOut &os, const std::string &name, const T &param)
	{
	os << name << "=";
	showParam(os, param);
	os << "\n";
	}

	template <class T>
	void
	paramIn(CheckpointIn &cp, const std::string &name, T &param)
	{
	const std::string &section(Serializable::currentSection());
	std::string str;
	if (!cp.find(section, name, str) \|\| !parseParam(str, param)) {
	fatal("Can't unserialize '%s:%s'\n", section, name);
	}
	}

	template <class T>
	bool
	optParamIn(CheckpointIn &cp, const std::string &name,
	T &param, bool warn = true)
	{
	const std::string &section(Serializable::currentSection());
	std::string str;
	if (!cp.find(section, name, str) \|\| !parseParam(str, param)) {
	if (warn)
	warn("optional parameter %s:%s not present\n", section, name);
	return false;
	} else {
	return true;
	}
	}

	template <class T>
	void
	arrayParamOut(CheckpointOut &os, const std::string &name,
	const std::vector<T> &param)
	{
	typename std::vector<T>::size_type size = param.size();
	os << name << "=";
	if (size > 0)
	showParam(os, param[0]);
	for (typename std::vector<T>::size_type i = 1; i < size; ++i) {
	os << " ";
	showParam(os, param[i]);
	}
	os << "\n";
	}

	template <class T>
	void
	arrayParamOut(CheckpointOut &os, const std::string &name,
	const std::list<T> &param)
	{
	typename std::list<T>::const_iterator it = param.begin();

	os << name << "=";
	if (param.size() > 0)
	showParam(os, *it);
	it++;
	while (it != param.end()) {
	os << " ";
	showParam(os, *it);
	it++;
	}
	os << "\n";
	}

	template <class T>
	void
	arrayParamOut(CheckpointOut &os, const std::string &name,
	const std::set<T> &param)
	{
	typename std::set<T>::const_iterator it = param.begin();

	os << name << "=";
	if (param.size() > 0)
	showParam(os, *it);
	it++;
	while (it != param.end()) {
	os << " ";
	showParam(os, *it);
	it++;
	}
	os << "\n";
	}

	template <class T>
	void
	arrayParamOut(CheckpointOut &os, const std::string &name,
	const T *param, unsigned size)
	{
	os << name << "=";
	if (size > 0)
	showParam(os, param[0]);
	for (unsigned i = 1; i < size; ++i) {
	os << " ";
	showParam(os, param[i]);
	}
	os << "\n";
	}


	template <class T>
	void
	arrayParamIn(CheckpointIn &cp, const std::string &name,
	T *param, unsigned size)
	{
	const std::string &section(Serializable::currentSection());
	std::string str;
	if (!cp.find(section, name, str)) {
	fatal("Can't unserialize '%s:%s'\n", section, name);
	}

	// code below stolen from VectorParam<T>::parse().
	// it would be nice to unify these somehow...

	std::vector<std::string> tokens;

	tokenize(tokens, str, ' ');

	// Need this if we were doing a vector
	// value.resize(tokens.size());

	if (tokens.size() != size) {
	fatal("Array size mismatch on %s:%s'\n", section, name);
	}

	for (std::vector<std::string>::size_type i = 0; i < tokens.size(); i++) {
	// need to parse into local variable to handle vector<bool>,
	// for which operator[] returns a special reference class
	// that's not the same as 'bool&', (since it's a packed
	// vector)
	T scalar_value;
	if (!parseParam(tokens[i], scalar_value)) {
	std::string err("could not parse \"");

	err += str;
	err += "\"";

	fatal(err);
	}

	// assign parsed value to vector
	param[i] = scalar_value;
	}
	}

	template <class T>
	void
	arrayParamIn(CheckpointIn &cp, const std::string &name, std::vector<T> &param)
	{
	const std::string &section(Serializable::currentSection());
	std::string str;
	if (!cp.find(section, name, str)) {
	fatal("Can't unserialize '%s:%s'\n", section, name);
	}

	// code below stolen from VectorParam<T>::parse().
	// it would be nice to unify these somehow...

	std::vector<std::string> tokens;

	tokenize(tokens, str, ' ');

	// Need this if we were doing a vector
	// value.resize(tokens.size());

	param.resize(tokens.size());

	for (std::vector<std::string>::size_type i = 0; i < tokens.size(); i++) {
	// need to parse into local variable to handle vector<bool>,
	// for which operator[] returns a special reference class
	// that's not the same as 'bool&', (since it's a packed
	// vector)
	T scalar_value;
	if (!parseParam(tokens[i], scalar_value)) {
	std::string err("could not parse \"");

	err += str;
	err += "\"";

	fatal(err);
	}

	// assign parsed value to vector
	param[i] = scalar_value;
	}
	}

	template <class T>
	void
	arrayParamIn(CheckpointIn &cp, const std::string &name, std::list<T> &param)
	{
	const std::string &section(Serializable::currentSection());
	std::string str;
	if (!cp.find(section, name, str)) {
	fatal("Can't unserialize '%s:%s'\n", section, name);
	}
	param.clear();

	std::vector<std::string> tokens;
	tokenize(tokens, str, ' ');

	for (std::vector<std::string>::size_type i = 0; i < tokens.size(); i++) {
	T scalar_value;
	if (!parseParam(tokens[i], scalar_value)) {
	std::string err("could not parse \"");

	err += str;
	err += "\"";

	fatal(err);
	}

	// assign parsed value to vector
	param.push_back(scalar_value);
	}
	}

	template <class T>
	void
	arrayParamIn(CheckpointIn &cp, const std::string &name, std::set<T> &param)
	{
	const std::string &section(Serializable::currentSection());
	std::string str;
	if (!cp.find(section, name, str)) {
	fatal("Can't unserialize '%s:%s'\n", section, name);
	}
	param.clear();

	std::vector<std::string> tokens;
	tokenize(tokens, str, ' ');

	for (std::vector<std::string>::size_type i = 0; i < tokens.size(); i++) {
	T scalar_value;
	if (!parseParam(tokens[i], scalar_value)) {
	std::string err("could not parse \"");

	err += str;
	err += "\"";

	fatal(err);
	}

	// assign parsed value to vector
	param.insert(scalar_value);
	}
	}

	void
	debug_serialize(const std::string &cpt_dir);

	void
	objParamIn(CheckpointIn &cp, const std::string &name, SimObject * &param);

	//
	// These macros are streamlined to use in serialize/unserialize
	// functions. It's assumed that serialize() has a parameter 'os' for
	// the ostream, and unserialize() has parameters 'cp' and 'section'.
	#define SERIALIZE_SCALAR(scalar) paramOut(cp, #scalar, scalar)

	#define UNSERIALIZE_SCALAR(scalar) paramIn(cp, #scalar, scalar)
	#define UNSERIALIZE_OPT_SCALAR(scalar) optParamIn(cp, #scalar, scalar)

	// ENUMs are like SCALARs, but we cast them to ints on the way out
	#define SERIALIZE_ENUM(scalar) paramOut(cp, #scalar, (int)scalar)

	#define UNSERIALIZE_ENUM(scalar) \
	do { \
	int tmp; \
	paramIn(cp, #scalar, tmp); \
	scalar = static_cast<decltype(scalar)>(tmp); \
	} while (0)

	#define SERIALIZE_ARRAY(member, size) \
	arrayParamOut(cp, #member, member, size)

	#define UNSERIALIZE_ARRAY(member, size) \
	arrayParamIn(cp, #member, member, size)

	#define SERIALIZE_CONTAINER(member) \
	arrayParamOut(cp, #member, member)

	#define UNSERIALIZE_CONTAINER(member) \
	arrayParamIn(cp, #member, member)

	#define SERIALIZE_EVENT(event) event.serializeSection(cp, #event);

	#define UNSERIALIZE_EVENT(event) \
	do { \
	event.unserializeSection(cp, #event); \
	eventQueue()->checkpointReschedule(&event); \
	} while (0)

	#define SERIALIZE_OBJ(obj) obj.serializeSection(cp, #obj)
	#define UNSERIALIZE_OBJ(obj) obj.unserializeSection(cp, #obj)

	#define SERIALIZE_OBJPTR(objptr) paramOut(cp, #objptr, (objptr)->name())

	#define UNSERIALIZE_OBJPTR(objptr) \
	do { \
	SimObject *sptr; \
	objParamIn(cp, #objptr, sptr); \
	objptr = dynamic_cast<decltype(objptr)>(sptr); \
	} while (0)

	#endif // __SERIALIZE_HH__