src/arch/arm/pmu.hh - testing/jenkins-gem5-prod - Git at Google

 /*
  * Copyright (c) 2011-2014, 2017-2018 ARM Limited
  * All rights reserved
  *
  * The license below extends only to copyright in the software and shall
  * not be construed as granting a license to any other intellectual
  * property including but not limited to intellectual property relating
  * to a hardware implementation of the functionality of the software
  * licensed hereunder.  You may use the software subject to the license
  * terms below provided that you ensure that this notice is replicated
  * unmodified and in its entirety in all distributions of the software,
  * modified or unmodified, in source code or in binary form.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are
  * met: redistributions of source code must retain the above copyright
  * notice, this list of conditions and the following disclaimer;
  * redistributions in binary form must reproduce the above copyright
  * notice, this list of conditions and the following disclaimer in the
  * documentation and/or other materials provided with the distribution;
  * neither the name of the copyright holders nor the names of its
  * contributors may be used to endorse or promote products derived from
  * this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * Authors: Dam Sunwoo
  *          Matt Horsnell
  *          Andreas Sandberg
  */
 #ifndef __ARCH_ARM_PMU_HH__
 #define __ARCH_ARM_PMU_HH__

 #include <map>
 #include <memory>
 #include <vector>

 #include "arch/arm/isa_device.hh"
 #include "arch/arm/registers.hh"
 #include "arch/arm/system.hh"
 #include "base/cprintf.hh"
 #include "cpu/base.hh"
 #include "debug/PMUVerbose.hh"
 #include "sim/eventq.hh"
 #include "sim/sim_object.hh"
 #include "sim/system.hh"

 class ArmPMUParams;
 class Platform;
 class ThreadContext;
 class ArmInterruptPin;

 namespace ArmISA {


 /**
  * Model of an ARM PMU version 3
  *
  * This class implements a subset of the ARM PMU v3 specification as
  * described in the ARMv8 reference manual. It supports most of the
  * features of the PMU, however the following features are known to be
  * missing:
  *
  * <ul>
  *   <li>Event filtering (e.g., from different privilege levels).
  *   <li>Access controls (the PMU currently ignores the execution level).
  *   <li>The chain counter (event no. 0x1E) is unimplemented.
  * </ul>
  *
  * The PMU itself does not implement any events, in merely provides an
  * interface for the configuration scripts to hook up probes that
  * drive events. Configuration scripts should call addEventProbe() to
  * configure custom events or high-level methods to configure
  * architected events. The Python implementation of addEventProbe()
  * automatically delays event type registration until after
  * instantiation.
  *
  * In order to support CPU switching and some combined counters (e.g.,
  * memory references synthesized from loads and stores), the PMU
  * allows multiple probes per event type. When creating a system that
  * switches between CPU models that share the same PMU, PMU events for
  * all of the CPU models can be registered with the PMU.
  *
  * @see The ARM Architecture Refererence Manual (DDI 0487A)
  *
  */
 class PMU : public SimObject, public ArmISA::BaseISADevice {
   public:
     PMU(const ArmPMUParams *p);
     ~PMU();

     void addEventProbe(unsigned int id, SimObject *obj, const char *name);
     void addSoftwareIncrementEvent(unsigned int id);

     void registerEvent(uint32_t id);

   public: // SimObject and related interfaces
     void serialize(CheckpointOut &cp) const override;
     void unserialize(CheckpointIn &cp) override;

     void drainResume() override;

     void regProbeListeners() override;

   public: // ISA Device interface
     void setThreadContext(ThreadContext *tc) override;

     /**
      * Set a register within the PMU.
      *
      * @param misc_reg Register number (see miscregs.hh)
      * @param val Value to store
      */
     void setMiscReg(int misc_reg, RegVal val) override;
     /**
      * Read a register within the PMU.
      *
      * @param misc_reg Register number (see miscregs.hh)
      * @return Register value.
      */
     RegVal readMiscReg(int misc_reg) override;

   protected: // PMU register types and constants
     BitUnion32(PMCR_t)
         // PMU Enable
         Bitfield<0> e;
         // Event counter reset
         Bitfield<1> p;
         // Cycle counter reset
         Bitfield<2> c;
         // Cycle counter divider enable
         Bitfield<3> d;
         // Export enable
         Bitfield<4> x;
         // Disable PMCCNTR when event counting is prohibited
         Bitfield<5> dp;
         // Long Cycle counter enable
         Bitfield<6> lc;
         // Number of event counters implemented
         Bitfield<15, 11> n;
         // Implementation ID
         Bitfield<23, 16> idcode;
         // Implementer code
         Bitfield<31, 24> imp;
     EndBitUnion(PMCR_t)

     BitUnion32(PMSELR_t)
         // Performance counter selector
         Bitfield<4, 0> sel;
     EndBitUnion(PMSELR_t)

     BitUnion32(PMEVTYPER_t)
         Bitfield<15, 0> evtCount;

         // Secure EL3 filtering
         Bitfield<26> m;
         // Non-secure EL2 mode filtering
         Bitfield<27> nsh;
         // Non-secure EL0 mode filtering
         Bitfield<28> nsu;
         // Non-secure EL1 mode filtering
         Bitfield<29> nsk;
         // EL0 filtering
         Bitfield<30> u;
         // EL1 filtering
         Bitfield<31> p;
     EndBitUnion(PMEVTYPER_t)

     /**
      * Counter ID within the PMU.
      *
      * This value is typically used to index into various registers
      * controlling interrupts and overflows. The value normally in the
      * [0, 31] range, where 31 refers to the cycle counter.
      */
     typedef unsigned int CounterId;

     /** Cycle Count Register Number */
     static const CounterId PMCCNTR = 31;

     /**
      * Event type ID.
      *
      * See the PMU documentation for a list of architected IDs.
      */
     typedef unsigned int EventTypeId;

   protected: /* High-level register and interrupt handling */
     RegVal readMiscRegInt(int misc_reg);

     /**
      * PMCR write handling
      *
      * The PMCR register needs special handling since writing to it
      * changes PMU-global state (e.g., resets all counters).
      *
      * @param val New PMCR value
      */
     void setControlReg(PMCR_t val);

     /**
      * Reset all event counters excluding the cycle counter to zero.
      */
     void resetEventCounts();

     /**
      * Deliver a PMU interrupt to the GIC
      */
     void raiseInterrupt();

     /**
      * Clear a PMU interrupt.
      */
     void clearInterrupt();

     /**
      * Get the value of a performance counter.
      *
      * This method returns the value of a general purpose performance
      * counter or the fixed-function cycle counter. Non-existing
      * counters are treated as constant '0'.
      *
      * @return Value of the performance counter, 0 if the counter does
      * not exist.
      */
     uint64_t getCounterValue(CounterId id) const {
         return isValidCounter(id) ? getCounter(id).getValue() : 0;
     }

     /**
      * Set the value of a performance counter.
      *
      * This method sets the value of a general purpose performance
      * counter or the fixed-function cycle counter. Writes to
      * non-existing counters are ignored.
      */
     void setCounterValue(CounterId id, uint64_t val);

     /**
      * Get the type and filter settings of a counter (PMEVTYPER)
      *
      * This method implements a read from a PMEVTYPER register. It
      * returns the type value and filter settings of a general purpose
      * performance counter or the cycle counter. Non-existing counters
      * are treated as constant '0'.
      *
      * @param id Counter ID within the PMU.
      * @return Performance counter type ID.
      */
     PMEVTYPER_t getCounterTypeRegister(CounterId id) const;

     /**
      * Set the type and filter settings of a performance counter
      * (PMEVTYPER)
      *
      * This method implements a write to a PMEVTYPER register. It sets
      * the type value and filter settings of a general purpose
      * performance counter or the cycle counter. Writes to
      * non-existing counters are ignored. The method automatically
      * updates the probes used by the counter if it is enabled.
      *
      * @param id Counter ID within the PMU.
      * @param type Performance counter type and filter configuration..
      */
     void setCounterTypeRegister(CounterId id, PMEVTYPER_t type);

     /**
      * Used for writing the Overflow Flag Status Register (SET/CLR)
      *
      * This method implements a write to the PMOVSSET/PMOVSCLR registers.
      * It is capturing change of state in the register bits so that
      * the overflow interrupt can be raised/cleared as a side effect
      * of the write.
      *
      * @param new_val New value of the Overflow Status Register
      */
     void setOverflowStatus(RegVal new_val);

   protected: /* Probe handling and counter state */
     struct CounterState;

     /**
      * Event definition base class
      */
     struct PMUEvent {

         PMUEvent() {}

         virtual ~PMUEvent() {}

         /**
          * attach this event to a given counter
          *
          * @param a pointer to the counter where to attach this event
          */
         void attachEvent(PMU::CounterState *user);

         /**
          * detach this event from a given counter
          *
          * @param a pointer to the counter where to detach this event from
          */
         void detachEvent(PMU::CounterState *user);

         /**
          * notify an event increment of val units, all the attached counters'
          * value is incremented by val units.
          *
          * @param the quantity by which to increment the attached counter
          * values
          */
         virtual void increment(const uint64_t val);

         /**
          * Enable the current event
          */
         virtual void enable() = 0;

         /**
          * Disable the current event
          */
         virtual void disable() = 0;

         /**
          *  Method called immediately before a counter access in order for
          *  the associated event to update its state (if required)
          */
         virtual void updateAttachedCounters() {}

       protected:

         /** set of counters using this event  **/
         std::set<PMU::CounterState*> userCounters;
     };

     struct RegularEvent : public PMUEvent {
         typedef std::pair<SimObject*, std::string> EventTypeEntry;

         void addMicroarchitectureProbe(SimObject* object,
             std::string name) {

             panic_if(!object,"malformed probe-point"
                 " definition with name %s\n", name);

             microArchitectureEventSet.emplace(object, name);
         }

       protected:
         struct RegularProbe: public  ProbeListenerArgBase<uint64_t>
         {
             RegularProbe(RegularEvent *parent, SimObject* obj,
                 std::string name)
                 : ProbeListenerArgBase(obj->getProbeManager(), name),
                   parentEvent(parent) {}

             RegularProbe() = delete;

             void notify(const uint64_t &val);

           protected:
             RegularEvent *parentEvent;
         };

         /** The set of events driving the event value **/
         std::set<EventTypeEntry> microArchitectureEventSet;

         /** Set of probe listeners tapping onto each of the input micro-arch
          *  events which compose this pmu event
          */
         std::vector<std::unique_ptr<RegularProbe>> attachedProbePointList;

         void enable() override;

         void disable() override;
     };

     class SWIncrementEvent : public PMUEvent
     {
         void enable() override {}
         void disable() override {}

       public:

         /**
          * write on the sw increment register inducing an increment of the
          * counters with this event selected according to the bitfield written.
          *
          * @param the bitfield selecting the counters to increment.
          */
         void write(uint64_t val);
     };

     /**
      * Obtain the event of a given id
      *
      * @param the id of the event to obtain
      * @return a pointer to the event with id eventId
      */
     PMUEvent* getEvent(uint64_t eventId);

     /** State of a counter within the PMU. **/
     struct CounterState : public Serializable {
         CounterState(PMU &pmuReference, uint64_t counter_id)
             : eventId(0), filter(0), enabled(false),
               overflow64(false), sourceEvent(nullptr),
               counterId(counter_id), value(0), resetValue(false),
               pmu(pmuReference) {}

         void serialize(CheckpointOut &cp) const override;
         void unserialize(CheckpointIn &cp)  override;

         /**
          * Add an event count to the counter and check for overflow.
          *
          * @param delta Number of events to add to the counter.
          * @return the quantity remaining until a counter overflow occurs.
          */
         uint64_t add(uint64_t delta);

         bool isFiltered() const;

         /**
          * Detach the counter from its event
          */
         void detach();

         /**
          * Attach this counter to an event
          *
          * @param the event to attach the counter to
          */
         void attach(PMUEvent* event);

         /**
          * Obtain the counter id
          *
          * @return the pysical counter id
          */
         uint64_t getCounterId() const{
             return counterId;
         }

         /**
          * rReturn the counter value
          *
          * @return the counter value
          */
         uint64_t getValue() const;

         /**
          * overwrite the value of the counter
          *
          * @param the new counter value
          */
         void setValue(uint64_t val);

       public: /* Serializable state */
         /** Counter event ID */
         EventTypeId eventId;

         /** Filtering settings (evtCount is unused) */
         PMEVTYPER_t filter;

         /** Is the counter enabled? */
         bool enabled;

         /** Is this a 64-bit counter? */
         bool overflow64;

       protected: /* Configuration */
         /** PmuEvent currently in use (if any) **/
         PMUEvent *sourceEvent;

         /** id of the counter instance **/
         uint64_t counterId;

         /** Current value of the counter */
         uint64_t value;

         /** Flag keeping track if the counter has been reset **/
         bool resetValue;

         PMU &pmu;

         template <typename ...Args>
         void debugCounter(const char* mainString, Args &...args) const {

             std::string userString = csprintf(mainString, args...);

             warn("[counterId = %d, eventId = %d, sourceEvent = 0x%x] %s",
                 counterId, eventId, sourceEvent, userString.c_str());

         }
     };

     /**
      * Is this a valid counter ID?
      *
      * @param id ID of counter within the PMU.
      *
      * @return true if counter is within the allowed range or the
      * cycle counter, false otherwise.
      */
     bool isValidCounter(CounterId id) const {
         return id < counters.size() || id == PMCCNTR;
     }

     /**
      * Return the state of a counter.
      *
      * @param id ID of counter within the PMU.
      * @return Reference to a CounterState instance representing the
      * counter.
      */
     CounterState &getCounter(CounterId id) {
         assert(isValidCounter(id));
         return id == PMCCNTR ? cycleCounter : counters[id];
     }

     /**
      * Return the state of a counter.
      *
      * @param id ID of counter within the PMU.
      * @return Reference to a CounterState instance representing the
      * counter.
      */
     const CounterState &getCounter(CounterId id) const {
         assert(isValidCounter(id));
         return id == PMCCNTR ? cycleCounter : counters[id];
     }

     /**
      * Depending on counter configuration, add or remove the probes
      * driving the counter.
      *
      * Look at the state of a counter and (re-)attach the probes
      * needed to drive a counter if it is currently active. All probes
      * for the counter are detached if the counter is inactive.
      *
      * @param id ID of counter within the PMU.
      * @param ctr Reference to the counter's state
      */
     void updateCounter(CounterState &ctr);

     /**
      * Check if a counter's settings allow it to be counted.
      *
      * @param ctr Counter state instance representing this counter.
      * @return false if the counter is active, true otherwise.
      */
     bool isFiltered(const CounterState &ctr) const;

     /**
      * Call updateCounter() for each counter in the PMU if the
      * counter's state has changed..
      *
      * @see updateCounter()
      */
     void updateAllCounters();

   protected: /* State that needs to be serialized */
     /** Performance Monitor Count Enable Register */
     RegVal reg_pmcnten;

     /** Performance Monitor Control Register */
     PMCR_t reg_pmcr;

     /** Performance Monitor Selection Register */
     PMSELR_t reg_pmselr;

     /** Performance Monitor Interrupt Enable Register */
     RegVal reg_pminten;

     /** Performance Monitor Overflow Status Register */
     RegVal reg_pmovsr;

     /**
      * Performance counter ID register
      *
      * These registers contain a bitmask of available architected
      * counters.
      */
     uint64_t reg_pmceid0;
     uint64_t reg_pmceid1;

     /** Remainder part when the clock counter is divided by 64 */
     unsigned clock_remainder;

     /** The number of regular event counters **/
     uint64_t maximumCounterCount;

     /** State of all general-purpose counters supported by PMU */
     std::vector<CounterState> counters;

     /** State of the cycle counter */
     CounterState cycleCounter;

     /** The id of the counter hardwired to the cpu cycle counter **/
     const uint64_t cycleCounterEventId;

     /** The event that implements the software increment **/
     SWIncrementEvent *swIncrementEvent;

   protected: /* Configuration and constants */
     /** Constant (configuration-dependent) part of the PMCR */
     PMCR_t reg_pmcr_conf;

     /** PMCR write mask when accessed from the guest */
     static const RegVal reg_pmcr_wr_mask;

     /** Performance monitor interrupt number */
     ArmInterruptPin *interrupt;

     /**
      * List of event types supported by this PMU.
      */
     std::map<EventTypeId, PMUEvent*> eventMap;
 };

 } // namespace ArmISA
 #endif
	/*
	* Copyright (c) 2011-2014, 2017-2018 ARM Limited
	* All rights reserved
	*
	* The license below extends only to copyright in the software and shall
	* not be construed as granting a license to any other intellectual
	* property including but not limited to intellectual property relating
	* to a hardware implementation of the functionality of the software
	* licensed hereunder. You may use the software subject to the license
	* terms below provided that you ensure that this notice is replicated
	* unmodified and in its entirety in all distributions of the software,
	* modified or unmodified, in source code or in binary form.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are
	* met: redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer;
	* redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution;
	* neither the name of the copyright holders nor the names of its
	* contributors may be used to endorse or promote products derived from
	* this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*
	* Authors: Dam Sunwoo
	* Matt Horsnell
	* Andreas Sandberg
	*/
	#ifndef __ARCH_ARM_PMU_HH__
	#define __ARCH_ARM_PMU_HH__

	#include <map>
	#include <memory>
	#include <vector>

	#include "arch/arm/isa_device.hh"
	#include "arch/arm/registers.hh"
	#include "arch/arm/system.hh"
	#include "base/cprintf.hh"
	#include "cpu/base.hh"
	#include "debug/PMUVerbose.hh"
	#include "sim/eventq.hh"
	#include "sim/sim_object.hh"
	#include "sim/system.hh"

	class ArmPMUParams;
	class Platform;
	class ThreadContext;
	class ArmInterruptPin;

	namespace ArmISA {


	/**
	* Model of an ARM PMU version 3
	*
	* This class implements a subset of the ARM PMU v3 specification as
	* described in the ARMv8 reference manual. It supports most of the
	* features of the PMU, however the following features are known to be
	* missing:
	*
	* <ul>
	* <li>Event filtering (e.g., from different privilege levels).
	* <li>Access controls (the PMU currently ignores the execution level).
	* <li>The chain counter (event no. 0x1E) is unimplemented.
	* </ul>
	*
	* The PMU itself does not implement any events, in merely provides an
	* interface for the configuration scripts to hook up probes that
	* drive events. Configuration scripts should call addEventProbe() to
	* configure custom events or high-level methods to configure
	* architected events. The Python implementation of addEventProbe()
	* automatically delays event type registration until after
	* instantiation.
	*
	* In order to support CPU switching and some combined counters (e.g.,
	* memory references synthesized from loads and stores), the PMU
	* allows multiple probes per event type. When creating a system that
	* switches between CPU models that share the same PMU, PMU events for
	* all of the CPU models can be registered with the PMU.
	*
	* @see The ARM Architecture Refererence Manual (DDI 0487A)
	*
	*/
	class PMU : public SimObject, public ArmISA::BaseISADevice {
	public:
	PMU(const ArmPMUParams *p);
	~PMU();

	void addEventProbe(unsigned int id, SimObject obj, const char name);
	void addSoftwareIncrementEvent(unsigned int id);

	void registerEvent(uint32_t id);

	public: // SimObject and related interfaces
	void serialize(CheckpointOut &cp) const override;
	void unserialize(CheckpointIn &cp) override;

	void drainResume() override;

	void regProbeListeners() override;

	public: // ISA Device interface
	void setThreadContext(ThreadContext *tc) override;

	/**
	* Set a register within the PMU.
	*
	* @param misc_reg Register number (see miscregs.hh)
	* @param val Value to store
	*/
	void setMiscReg(int misc_reg, RegVal val) override;
	/**
	* Read a register within the PMU.
	*
	* @param misc_reg Register number (see miscregs.hh)
	* @return Register value.
	*/
	RegVal readMiscReg(int misc_reg) override;

	protected: // PMU register types and constants
	BitUnion32(PMCR_t)
	// PMU Enable
	Bitfield<0> e;
	// Event counter reset
	Bitfield<1> p;
	// Cycle counter reset
	Bitfield<2> c;
	// Cycle counter divider enable
	Bitfield<3> d;
	// Export enable
	Bitfield<4> x;
	// Disable PMCCNTR when event counting is prohibited
	Bitfield<5> dp;
	// Long Cycle counter enable
	Bitfield<6> lc;
	// Number of event counters implemented
	Bitfield<15, 11> n;
	// Implementation ID
	Bitfield<23, 16> idcode;
	// Implementer code
	Bitfield<31, 24> imp;
	EndBitUnion(PMCR_t)

	BitUnion32(PMSELR_t)
	// Performance counter selector
	Bitfield<4, 0> sel;
	EndBitUnion(PMSELR_t)

	BitUnion32(PMEVTYPER_t)
	Bitfield<15, 0> evtCount;

	// Secure EL3 filtering
	Bitfield<26> m;
	// Non-secure EL2 mode filtering
	Bitfield<27> nsh;
	// Non-secure EL0 mode filtering
	Bitfield<28> nsu;
	// Non-secure EL1 mode filtering
	Bitfield<29> nsk;
	// EL0 filtering
	Bitfield<30> u;
	// EL1 filtering
	Bitfield<31> p;
	EndBitUnion(PMEVTYPER_t)

	/**
	* Counter ID within the PMU.
	*
	* This value is typically used to index into various registers
	* controlling interrupts and overflows. The value normally in the
	* [0, 31] range, where 31 refers to the cycle counter.
	*/
	typedef unsigned int CounterId;

	/** Cycle Count Register Number */
	static const CounterId PMCCNTR = 31;

	/**
	* Event type ID.
	*
	* See the PMU documentation for a list of architected IDs.
	*/
	typedef unsigned int EventTypeId;

	protected: /* High-level register and interrupt handling */
	RegVal readMiscRegInt(int misc_reg);

	/**
	* PMCR write handling
	*
	* The PMCR register needs special handling since writing to it
	* changes PMU-global state (e.g., resets all counters).
	*
	* @param val New PMCR value
	*/
	void setControlReg(PMCR_t val);

	/**
	* Reset all event counters excluding the cycle counter to zero.
	*/
	void resetEventCounts();

	/**
	* Deliver a PMU interrupt to the GIC
	*/
	void raiseInterrupt();

	/**
	* Clear a PMU interrupt.
	*/
	void clearInterrupt();

	/**
	* Get the value of a performance counter.
	*
	* This method returns the value of a general purpose performance
	* counter or the fixed-function cycle counter. Non-existing
	* counters are treated as constant '0'.
	*
	* @return Value of the performance counter, 0 if the counter does
	* not exist.
	*/
	uint64_t getCounterValue(CounterId id) const {
	return isValidCounter(id) ? getCounter(id).getValue() : 0;
	}

	/**
	* Set the value of a performance counter.
	*
	* This method sets the value of a general purpose performance
	* counter or the fixed-function cycle counter. Writes to
	* non-existing counters are ignored.
	*/
	void setCounterValue(CounterId id, uint64_t val);

	/**
	* Get the type and filter settings of a counter (PMEVTYPER)
	*
	* This method implements a read from a PMEVTYPER register. It
	* returns the type value and filter settings of a general purpose
	* performance counter or the cycle counter. Non-existing counters
	* are treated as constant '0'.
	*
	* @param id Counter ID within the PMU.
	* @return Performance counter type ID.
	*/
	PMEVTYPER_t getCounterTypeRegister(CounterId id) const;

	/**
	* Set the type and filter settings of a performance counter
	* (PMEVTYPER)
	*
	* This method implements a write to a PMEVTYPER register. It sets
	* the type value and filter settings of a general purpose
	* performance counter or the cycle counter. Writes to
	* non-existing counters are ignored. The method automatically
	* updates the probes used by the counter if it is enabled.
	*
	* @param id Counter ID within the PMU.
	* @param type Performance counter type and filter configuration..
	*/
	void setCounterTypeRegister(CounterId id, PMEVTYPER_t type);

	/**
	* Used for writing the Overflow Flag Status Register (SET/CLR)
	*
	* This method implements a write to the PMOVSSET/PMOVSCLR registers.
	* It is capturing change of state in the register bits so that
	* the overflow interrupt can be raised/cleared as a side effect
	* of the write.
	*
	* @param new_val New value of the Overflow Status Register
	*/
	void setOverflowStatus(RegVal new_val);

	protected: /* Probe handling and counter state */
	struct CounterState;

	/**
	* Event definition base class
	*/
	struct PMUEvent {

	PMUEvent() {}

	virtual ~PMUEvent() {}

	/**
	* attach this event to a given counter
	*
	* @param a pointer to the counter where to attach this event
	*/
	void attachEvent(PMU::CounterState *user);

	/**
	* detach this event from a given counter
	*
	* @param a pointer to the counter where to detach this event from
	*/
	void detachEvent(PMU::CounterState *user);

	/**
	* notify an event increment of val units, all the attached counters'
	* value is incremented by val units.
	*
	* @param the quantity by which to increment the attached counter
	* values
	*/
	virtual void increment(const uint64_t val);

	/**
	* Enable the current event
	*/
	virtual void enable() = 0;

	/**
	* Disable the current event
	*/
	virtual void disable() = 0;

	/**
	* Method called immediately before a counter access in order for
	* the associated event to update its state (if required)
	*/
	virtual void updateAttachedCounters() {}

	protected:

	/ set of counters using this event /
	std::set<PMU::CounterState*> userCounters;
	};

	struct RegularEvent : public PMUEvent {
	typedef std::pair<SimObject*, std::string> EventTypeEntry;

	void addMicroarchitectureProbe(SimObject* object,
	std::string name) {

	panic_if(!object,"malformed probe-point"
	" definition with name %s\n", name);

	microArchitectureEventSet.emplace(object, name);
	}

	protected:
	struct RegularProbe: public ProbeListenerArgBase<uint64_t>
	{
	RegularProbe(RegularEvent parent, SimObject obj,
	std::string name)
	: ProbeListenerArgBase(obj->getProbeManager(), name),
	parentEvent(parent) {}

	RegularProbe() = delete;

	void notify(const uint64_t &val);

	protected:
	RegularEvent *parentEvent;
	};

	/ The set of events driving the event value /
	std::set<EventTypeEntry> microArchitectureEventSet;

	/** Set of probe listeners tapping onto each of the input micro-arch
	* events which compose this pmu event
	*/
	std::vector<std::unique_ptr<RegularProbe>> attachedProbePointList;

	void enable() override;

	void disable() override;
	};

	class SWIncrementEvent : public PMUEvent
	{
	void enable() override {}
	void disable() override {}

	public:

	/**
	* write on the sw increment register inducing an increment of the
	* counters with this event selected according to the bitfield written.
	*
	* @param the bitfield selecting the counters to increment.
	*/
	void write(uint64_t val);
	};

	/**
	* Obtain the event of a given id
	*
	* @param the id of the event to obtain
	* @return a pointer to the event with id eventId
	*/
	PMUEvent* getEvent(uint64_t eventId);

	/ State of a counter within the PMU. /
	struct CounterState : public Serializable {
	CounterState(PMU &pmuReference, uint64_t counter_id)
	: eventId(0), filter(0), enabled(false),
	overflow64(false), sourceEvent(nullptr),
	counterId(counter_id), value(0), resetValue(false),
	pmu(pmuReference) {}

	void serialize(CheckpointOut &cp) const override;
	void unserialize(CheckpointIn &cp) override;

	/**
	* Add an event count to the counter and check for overflow.
	*
	* @param delta Number of events to add to the counter.
	* @return the quantity remaining until a counter overflow occurs.
	*/
	uint64_t add(uint64_t delta);

	bool isFiltered() const;

	/**
	* Detach the counter from its event
	*/
	void detach();

	/**
	* Attach this counter to an event
	*
	* @param the event to attach the counter to
	*/
	void attach(PMUEvent* event);

	/**
	* Obtain the counter id
	*
	* @return the pysical counter id
	*/
	uint64_t getCounterId() const{
	return counterId;
	}

	/**
	* rReturn the counter value
	*
	* @return the counter value
	*/
	uint64_t getValue() const;

	/**
	* overwrite the value of the counter
	*
	* @param the new counter value
	*/
	void setValue(uint64_t val);

	public: /* Serializable state */
	/** Counter event ID */
	EventTypeId eventId;

	/** Filtering settings (evtCount is unused) */
	PMEVTYPER_t filter;

	/** Is the counter enabled? */
	bool enabled;

	/** Is this a 64-bit counter? */
	bool overflow64;

	protected: /* Configuration */
	/ PmuEvent currently in use (if any) /
	PMUEvent *sourceEvent;

	/ id of the counter instance /
	uint64_t counterId;

	/** Current value of the counter */
	uint64_t value;

	/ Flag keeping track if the counter has been reset /
	bool resetValue;

	PMU &pmu;

	template <typename ...Args>
	void debugCounter(const char* mainString, Args &...args) const {

	std::string userString = csprintf(mainString, args...);

	warn("[counterId = %d, eventId = %d, sourceEvent = 0x%x] %s",
	counterId, eventId, sourceEvent, userString.c_str());

	}
	};

	/**
	* Is this a valid counter ID?
	*
	* @param id ID of counter within the PMU.
	*
	* @return true if counter is within the allowed range or the
	* cycle counter, false otherwise.
	*/
	bool isValidCounter(CounterId id) const {
	return id < counters.size() \|\| id == PMCCNTR;
	}

	/**
	* Return the state of a counter.
	*
	* @param id ID of counter within the PMU.
	* @return Reference to a CounterState instance representing the
	* counter.
	*/
	CounterState &getCounter(CounterId id) {
	assert(isValidCounter(id));
	return id == PMCCNTR ? cycleCounter : counters[id];
	}

	/**
	* Return the state of a counter.
	*
	* @param id ID of counter within the PMU.
	* @return Reference to a CounterState instance representing the
	* counter.
	*/
	const CounterState &getCounter(CounterId id) const {
	assert(isValidCounter(id));
	return id == PMCCNTR ? cycleCounter : counters[id];
	}

	/**
	* Depending on counter configuration, add or remove the probes
	* driving the counter.
	*
	* Look at the state of a counter and (re-)attach the probes
	* needed to drive a counter if it is currently active. All probes
	* for the counter are detached if the counter is inactive.
	*
	* @param id ID of counter within the PMU.
	* @param ctr Reference to the counter's state
	*/
	void updateCounter(CounterState &ctr);

	/**
	* Check if a counter's settings allow it to be counted.
	*
	* @param ctr Counter state instance representing this counter.
	* @return false if the counter is active, true otherwise.
	*/
	bool isFiltered(const CounterState &ctr) const;

	/**
	* Call updateCounter() for each counter in the PMU if the
	* counter's state has changed..
	*
	* @see updateCounter()
	*/
	void updateAllCounters();

	protected: /* State that needs to be serialized */
	/** Performance Monitor Count Enable Register */
	RegVal reg_pmcnten;

	/** Performance Monitor Control Register */
	PMCR_t reg_pmcr;

	/** Performance Monitor Selection Register */
	PMSELR_t reg_pmselr;

	/** Performance Monitor Interrupt Enable Register */
	RegVal reg_pminten;

	/** Performance Monitor Overflow Status Register */
	RegVal reg_pmovsr;

	/**
	* Performance counter ID register
	*
	* These registers contain a bitmask of available architected
	* counters.
	*/
	uint64_t reg_pmceid0;
	uint64_t reg_pmceid1;

	/** Remainder part when the clock counter is divided by 64 */
	unsigned clock_remainder;

	/ The number of regular event counters /
	uint64_t maximumCounterCount;

	/** State of all general-purpose counters supported by PMU */
	std::vector<CounterState> counters;

	/** State of the cycle counter */
	CounterState cycleCounter;

	/ The id of the counter hardwired to the cpu cycle counter /
	const uint64_t cycleCounterEventId;

	/ The event that implements the software increment /
	SWIncrementEvent *swIncrementEvent;

	protected: /* Configuration and constants */
	/** Constant (configuration-dependent) part of the PMCR */
	PMCR_t reg_pmcr_conf;

	/** PMCR write mask when accessed from the guest */
	static const RegVal reg_pmcr_wr_mask;

	/** Performance monitor interrupt number */
	ArmInterruptPin *interrupt;

	/**
	* List of event types supported by this PMU.
	*/
	std::map<EventTypeId, PMUEvent*> eventMap;
	};

	} // namespace ArmISA
	#endif