| # Copyright (c) 2012-2014, 2017, 2018 ARM Limited |
| # All rights reserved. |
| # |
| # The license below extends only to copyright in the software and shall |
| # not be construed as granting a license to any other intellectual |
| # property including but not limited to intellectual property relating |
| # to a hardware implementation of the functionality of the software |
| # licensed hereunder. You may use the software subject to the license |
| # terms below provided that you ensure that this notice is replicated |
| # unmodified and in its entirety in all distributions of the software, |
| # modified or unmodified, in source code or in binary form. |
| # |
| # Copyright (c) 2004-2006 The Regents of The University of Michigan |
| # Copyright (c) 2010-2011 Advanced Micro Devices, Inc. |
| # All rights reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are |
| # met: redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer; |
| # redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution; |
| # neither the name of the copyright holders nor the names of its |
| # contributors may be used to endorse or promote products derived from |
| # this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| # |
| # Authors: Steve Reinhardt |
| # Nathan Binkert |
| # Gabe Black |
| # Andreas Hansson |
| |
| ##################################################################### |
| # |
| # Parameter description classes |
| # |
| # The _params dictionary in each class maps parameter names to either |
| # a Param or a VectorParam object. These objects contain the |
| # parameter description string, the parameter type, and the default |
| # value (if any). The convert() method on these objects is used to |
| # force whatever value is assigned to the parameter to the appropriate |
| # type. |
| # |
| # Note that the default values are loaded into the class's attribute |
| # space when the parameter dictionary is initialized (in |
| # MetaSimObject._new_param()); after that point they aren't used. |
| # |
| ##################################################################### |
| |
| from __future__ import print_function |
| import six |
| if six.PY3: |
| long = int |
| |
| import copy |
| import datetime |
| import re |
| import sys |
| import time |
| import math |
| |
| from . import proxy |
| from . import ticks |
| from .util import * |
| |
| def isSimObject(*args, **kwargs): |
| from . import SimObject |
| return SimObject.isSimObject(*args, **kwargs) |
| |
| def isSimObjectSequence(*args, **kwargs): |
| from . import SimObject |
| return SimObject.isSimObjectSequence(*args, **kwargs) |
| |
| def isSimObjectClass(*args, **kwargs): |
| from . import SimObject |
| return SimObject.isSimObjectClass(*args, **kwargs) |
| |
| allParams = {} |
| |
| class MetaParamValue(type): |
| def __new__(mcls, name, bases, dct): |
| cls = super(MetaParamValue, mcls).__new__(mcls, name, bases, dct) |
| assert name not in allParams |
| allParams[name] = cls |
| return cls |
| |
| |
| # Dummy base class to identify types that are legitimate for SimObject |
| # parameters. |
| class ParamValue(object): |
| __metaclass__ = MetaParamValue |
| cmd_line_settable = False |
| |
| # Generate the code needed as a prerequisite for declaring a C++ |
| # object of this type. Typically generates one or more #include |
| # statements. Used when declaring parameters of this type. |
| @classmethod |
| def cxx_predecls(cls, code): |
| pass |
| |
| @classmethod |
| def pybind_predecls(cls, code): |
| cls.cxx_predecls(code) |
| |
| # default for printing to .ini file is regular string conversion. |
| # will be overridden in some cases |
| def ini_str(self): |
| return str(self) |
| |
| # default for printing to .json file is regular string conversion. |
| # will be overridden in some cases, mostly to use native Python |
| # types where there are similar JSON types |
| def config_value(self): |
| return str(self) |
| |
| # Prerequisites for .ini parsing with cxx_ini_parse |
| @classmethod |
| def cxx_ini_predecls(cls, code): |
| pass |
| |
| # parse a .ini file entry for this param from string expression |
| # src into lvalue dest (of the param's C++ type) |
| @classmethod |
| def cxx_ini_parse(cls, code, src, dest, ret): |
| code('// Unhandled param type: %s' % cls.__name__) |
| code('%s false;' % ret) |
| |
| # allows us to blithely call unproxy() on things without checking |
| # if they're really proxies or not |
| def unproxy(self, base): |
| return self |
| |
| # Produce a human readable version of the stored value |
| def pretty_print(self, value): |
| return str(value) |
| |
| # Regular parameter description. |
| class ParamDesc(object): |
| def __init__(self, ptype_str, ptype, *args, **kwargs): |
| self.ptype_str = ptype_str |
| # remember ptype only if it is provided |
| if ptype != None: |
| self.ptype = ptype |
| |
| if args: |
| if len(args) == 1: |
| self.desc = args[0] |
| elif len(args) == 2: |
| self.default = args[0] |
| self.desc = args[1] |
| else: |
| raise TypeError('too many arguments') |
| |
| if 'desc' in kwargs: |
| assert(not hasattr(self, 'desc')) |
| self.desc = kwargs['desc'] |
| del kwargs['desc'] |
| |
| if 'default' in kwargs: |
| assert(not hasattr(self, 'default')) |
| self.default = kwargs['default'] |
| del kwargs['default'] |
| |
| if kwargs: |
| raise TypeError('extra unknown kwargs %s' % kwargs) |
| |
| if not hasattr(self, 'desc'): |
| raise TypeError('desc attribute missing') |
| |
| def __getattr__(self, attr): |
| if attr == 'ptype': |
| from . import SimObject |
| ptype = SimObject.allClasses[self.ptype_str] |
| assert isSimObjectClass(ptype) |
| self.ptype = ptype |
| return ptype |
| |
| raise AttributeError("'%s' object has no attribute '%s'" % \ |
| (type(self).__name__, attr)) |
| |
| def example_str(self): |
| if hasattr(self.ptype, "ex_str"): |
| return self.ptype.ex_str |
| else: |
| return self.ptype_str |
| |
| # Is the param available to be exposed on the command line |
| def isCmdLineSettable(self): |
| if hasattr(self.ptype, "cmd_line_settable"): |
| return self.ptype.cmd_line_settable |
| else: |
| return False |
| |
| def convert(self, value): |
| if isinstance(value, proxy.BaseProxy): |
| value.set_param_desc(self) |
| return value |
| if 'ptype' not in self.__dict__ and isNullPointer(value): |
| # deferred evaluation of SimObject; continue to defer if |
| # we're just assigning a null pointer |
| return value |
| if isinstance(value, self.ptype): |
| return value |
| if isNullPointer(value) and isSimObjectClass(self.ptype): |
| return value |
| return self.ptype(value) |
| |
| def pretty_print(self, value): |
| if isinstance(value, proxy.BaseProxy): |
| return str(value) |
| if isNullPointer(value): |
| return NULL |
| return self.ptype(value).pretty_print(value) |
| |
| def cxx_predecls(self, code): |
| code('#include <cstddef>') |
| self.ptype.cxx_predecls(code) |
| |
| def pybind_predecls(self, code): |
| self.ptype.pybind_predecls(code) |
| |
| def cxx_decl(self, code): |
| code('${{self.ptype.cxx_type}} ${{self.name}};') |
| |
| # Vector-valued parameter description. Just like ParamDesc, except |
| # that the value is a vector (list) of the specified type instead of a |
| # single value. |
| |
| class VectorParamValue(list): |
| __metaclass__ = MetaParamValue |
| def __setattr__(self, attr, value): |
| raise AttributeError("Not allowed to set %s on '%s'" % \ |
| (attr, type(self).__name__)) |
| |
| def config_value(self): |
| return [v.config_value() for v in self] |
| |
| def ini_str(self): |
| return ' '.join([v.ini_str() for v in self]) |
| |
| def getValue(self): |
| return [ v.getValue() for v in self ] |
| |
| def unproxy(self, base): |
| if len(self) == 1 and isinstance(self[0], proxy.BaseProxy): |
| # The value is a proxy (e.g. Parent.any, Parent.all or |
| # Parent.x) therefore try resolve it |
| return self[0].unproxy(base) |
| else: |
| return [v.unproxy(base) for v in self] |
| |
| class SimObjectVector(VectorParamValue): |
| # support clone operation |
| def __call__(self, **kwargs): |
| return SimObjectVector([v(**kwargs) for v in self]) |
| |
| def clear_parent(self, old_parent): |
| for v in self: |
| v.clear_parent(old_parent) |
| |
| def set_parent(self, parent, name): |
| if len(self) == 1: |
| self[0].set_parent(parent, name) |
| else: |
| width = int(math.ceil(math.log(len(self))/math.log(10))) |
| for i,v in enumerate(self): |
| v.set_parent(parent, "%s%0*d" % (name, width, i)) |
| |
| def has_parent(self): |
| return any([e.has_parent() for e in self if not isNullPointer(e)]) |
| |
| # return 'cpu0 cpu1' etc. for print_ini() |
| def get_name(self): |
| return ' '.join([v._name for v in self]) |
| |
| # By iterating through the constituent members of the vector here |
| # we can nicely handle iterating over all a SimObject's children |
| # without having to provide lots of special functions on |
| # SimObjectVector directly. |
| def descendants(self): |
| for v in self: |
| for obj in v.descendants(): |
| yield obj |
| |
| def get_config_as_dict(self): |
| a = [] |
| for v in self: |
| a.append(v.get_config_as_dict()) |
| return a |
| |
| # If we are replacing an item in the vector, make sure to set the |
| # parent reference of the new SimObject to be the same as the parent |
| # of the SimObject being replaced. Useful to have if we created |
| # a SimObjectVector of temporary objects that will be modified later in |
| # configuration scripts. |
| def __setitem__(self, key, value): |
| val = self[key] |
| if value.has_parent(): |
| warn("SimObject %s already has a parent" % value.get_name() +\ |
| " that is being overwritten by a SimObjectVector") |
| value.set_parent(val.get_parent(), val._name) |
| super(SimObjectVector, self).__setitem__(key, value) |
| |
| # Enumerate the params of each member of the SimObject vector. Creates |
| # strings that will allow indexing into the vector by the python code and |
| # allow it to be specified on the command line. |
| def enumerateParams(self, flags_dict = {}, |
| cmd_line_str = "", |
| access_str = ""): |
| if hasattr(self, "_paramEnumed"): |
| print("Cycle detected enumerating params at %s?!" % (cmd_line_str)) |
| else: |
| x = 0 |
| for vals in self: |
| # Each entry in the SimObjectVector should be an |
| # instance of a SimObject |
| flags_dict = vals.enumerateParams(flags_dict, |
| cmd_line_str + "%d." % x, |
| access_str + "[%d]." % x) |
| x = x + 1 |
| |
| return flags_dict |
| |
| class VectorParamDesc(ParamDesc): |
| # Convert assigned value to appropriate type. If the RHS is not a |
| # list or tuple, it generates a single-element list. |
| def convert(self, value): |
| if isinstance(value, (list, tuple)): |
| # list: coerce each element into new list |
| tmp_list = [ ParamDesc.convert(self, v) for v in value ] |
| elif isinstance(value, str): |
| # If input is a csv string |
| tmp_list = [ ParamDesc.convert(self, v) \ |
| for v in value.strip('[').strip(']').split(',') ] |
| else: |
| # singleton: coerce to a single-element list |
| tmp_list = [ ParamDesc.convert(self, value) ] |
| |
| if isSimObjectSequence(tmp_list): |
| return SimObjectVector(tmp_list) |
| else: |
| return VectorParamValue(tmp_list) |
| |
| # Produce a human readable example string that describes |
| # how to set this vector parameter in the absence of a default |
| # value. |
| def example_str(self): |
| s = super(VectorParamDesc, self).example_str() |
| help_str = "[" + s + "," + s + ", ...]" |
| return help_str |
| |
| # Produce a human readable representation of the value of this vector param. |
| def pretty_print(self, value): |
| if isinstance(value, (list, tuple)): |
| tmp_list = [ ParamDesc.pretty_print(self, v) for v in value ] |
| elif isinstance(value, str): |
| tmp_list = [ ParamDesc.pretty_print(self, v) for v in value.split(',') ] |
| else: |
| tmp_list = [ ParamDesc.pretty_print(self, value) ] |
| |
| return tmp_list |
| |
| # This is a helper function for the new config system |
| def __call__(self, value): |
| if isinstance(value, (list, tuple)): |
| # list: coerce each element into new list |
| tmp_list = [ ParamDesc.convert(self, v) for v in value ] |
| elif isinstance(value, str): |
| # If input is a csv string |
| tmp_list = [ ParamDesc.convert(self, v) \ |
| for v in value.strip('[').strip(']').split(',') ] |
| else: |
| # singleton: coerce to a single-element list |
| tmp_list = [ ParamDesc.convert(self, value) ] |
| |
| return VectorParamValue(tmp_list) |
| |
| def cxx_predecls(self, code): |
| code('#include <vector>') |
| self.ptype.cxx_predecls(code) |
| |
| def pybind_predecls(self, code): |
| code('#include <vector>') |
| self.ptype.pybind_predecls(code) |
| |
| def cxx_decl(self, code): |
| code('std::vector< ${{self.ptype.cxx_type}} > ${{self.name}};') |
| |
| class ParamFactory(object): |
| def __init__(self, param_desc_class, ptype_str = None): |
| self.param_desc_class = param_desc_class |
| self.ptype_str = ptype_str |
| |
| def __getattr__(self, attr): |
| if self.ptype_str: |
| attr = self.ptype_str + '.' + attr |
| return ParamFactory(self.param_desc_class, attr) |
| |
| # E.g., Param.Int(5, "number of widgets") |
| def __call__(self, *args, **kwargs): |
| ptype = None |
| try: |
| ptype = allParams[self.ptype_str] |
| except KeyError: |
| # if name isn't defined yet, assume it's a SimObject, and |
| # try to resolve it later |
| pass |
| return self.param_desc_class(self.ptype_str, ptype, *args, **kwargs) |
| |
| Param = ParamFactory(ParamDesc) |
| VectorParam = ParamFactory(VectorParamDesc) |
| |
| ##################################################################### |
| # |
| # Parameter Types |
| # |
| # Though native Python types could be used to specify parameter types |
| # (the 'ptype' field of the Param and VectorParam classes), it's more |
| # flexible to define our own set of types. This gives us more control |
| # over how Python expressions are converted to values (via the |
| # __init__() constructor) and how these values are printed out (via |
| # the __str__() conversion method). |
| # |
| ##################################################################### |
| |
| # String-valued parameter. Just mixin the ParamValue class with the |
| # built-in str class. |
| class String(ParamValue,str): |
| cxx_type = 'std::string' |
| cmd_line_settable = True |
| |
| @classmethod |
| def cxx_predecls(self, code): |
| code('#include <string>') |
| |
| def __call__(self, value): |
| self = value |
| return value |
| |
| @classmethod |
| def cxx_ini_parse(self, code, src, dest, ret): |
| code('%s = %s;' % (dest, src)) |
| code('%s true;' % ret) |
| |
| def getValue(self): |
| return self |
| |
| # superclass for "numeric" parameter values, to emulate math |
| # operations in a type-safe way. e.g., a Latency times an int returns |
| # a new Latency object. |
| class NumericParamValue(ParamValue): |
| @staticmethod |
| def unwrap(v): |
| return v.value if isinstance(v, NumericParamValue) else v |
| |
| def __str__(self): |
| return str(self.value) |
| |
| def __float__(self): |
| return float(self.value) |
| |
| def __long__(self): |
| return long(self.value) |
| |
| def __int__(self): |
| return int(self.value) |
| |
| # hook for bounds checking |
| def _check(self): |
| return |
| |
| def __mul__(self, other): |
| newobj = self.__class__(self) |
| newobj.value *= NumericParamValue.unwrap(other) |
| newobj._check() |
| return newobj |
| |
| __rmul__ = __mul__ |
| |
| def __truediv__(self, other): |
| newobj = self.__class__(self) |
| newobj.value /= NumericParamValue.unwrap(other) |
| newobj._check() |
| return newobj |
| |
| def __floordiv__(self, other): |
| newobj = self.__class__(self) |
| newobj.value //= NumericParamValue.unwrap(other) |
| newobj._check() |
| return newobj |
| |
| |
| def __add__(self, other): |
| newobj = self.__class__(self) |
| newobj.value += NumericParamValue.unwrap(other) |
| newobj._check() |
| return newobj |
| |
| def __sub__(self, other): |
| newobj = self.__class__(self) |
| newobj.value -= NumericParamValue.unwrap(other) |
| newobj._check() |
| return newobj |
| |
| def __iadd__(self, other): |
| self.value += NumericParamValue.unwrap(other) |
| self._check() |
| return self |
| |
| def __isub__(self, other): |
| self.value -= NumericParamValue.unwrap(other) |
| self._check() |
| return self |
| |
| def __imul__(self, other): |
| self.value *= NumericParamValue.unwrap(other) |
| self._check() |
| return self |
| |
| def __itruediv__(self, other): |
| self.value /= NumericParamValue.unwrap(other) |
| self._check() |
| return self |
| |
| def __ifloordiv__(self, other): |
| self.value //= NumericParamValue.unwrap(other) |
| self._check() |
| return self |
| |
| def __lt__(self, other): |
| return self.value < NumericParamValue.unwrap(other) |
| |
| # Python 2.7 pre __future__.division operators |
| # TODO: Remove these when after "import division from __future__" |
| __div__ = __truediv__ |
| __idiv__ = __itruediv__ |
| |
| def config_value(self): |
| return self.value |
| |
| @classmethod |
| def cxx_ini_predecls(cls, code): |
| # Assume that base/str.hh will be included anyway |
| # code('#include "base/str.hh"') |
| pass |
| |
| # The default for parsing PODs from an .ini entry is to extract from an |
| # istringstream and let overloading choose the right type according to |
| # the dest type. |
| @classmethod |
| def cxx_ini_parse(self, code, src, dest, ret): |
| code('%s to_number(%s, %s);' % (ret, src, dest)) |
| |
| # Metaclass for bounds-checked integer parameters. See CheckedInt. |
| class CheckedIntType(MetaParamValue): |
| def __init__(cls, name, bases, dict): |
| super(CheckedIntType, cls).__init__(name, bases, dict) |
| |
| # CheckedInt is an abstract base class, so we actually don't |
| # want to do any processing on it... the rest of this code is |
| # just for classes that derive from CheckedInt. |
| if name == 'CheckedInt': |
| return |
| |
| if not (hasattr(cls, 'min') and hasattr(cls, 'max')): |
| if not (hasattr(cls, 'size') and hasattr(cls, 'unsigned')): |
| panic("CheckedInt subclass %s must define either\n" \ |
| " 'min' and 'max' or 'size' and 'unsigned'\n", |
| name); |
| if cls.unsigned: |
| cls.min = 0 |
| cls.max = 2 ** cls.size - 1 |
| else: |
| cls.min = -(2 ** (cls.size - 1)) |
| cls.max = (2 ** (cls.size - 1)) - 1 |
| |
| # Abstract superclass for bounds-checked integer parameters. This |
| # class is subclassed to generate parameter classes with specific |
| # bounds. Initialization of the min and max bounds is done in the |
| # metaclass CheckedIntType.__init__. |
| class CheckedInt(NumericParamValue): |
| __metaclass__ = CheckedIntType |
| cmd_line_settable = True |
| |
| def _check(self): |
| if not self.min <= self.value <= self.max: |
| raise TypeError('Integer param out of bounds %d < %d < %d' % \ |
| (self.min, self.value, self.max)) |
| |
| def __init__(self, value): |
| if isinstance(value, str): |
| self.value = convert.toInteger(value) |
| elif isinstance(value, (int, long, float, NumericParamValue)): |
| self.value = long(value) |
| else: |
| raise TypeError("Can't convert object of type %s to CheckedInt" \ |
| % type(value).__name__) |
| self._check() |
| |
| def __call__(self, value): |
| self.__init__(value) |
| return value |
| |
| def __index__(self): |
| return int(self.value) |
| |
| @classmethod |
| def cxx_predecls(cls, code): |
| # most derived types require this, so we just do it here once |
| code('#include "base/types.hh"') |
| |
| def getValue(self): |
| return long(self.value) |
| |
| class Int(CheckedInt): cxx_type = 'int'; size = 32; unsigned = False |
| class Unsigned(CheckedInt): cxx_type = 'unsigned'; size = 32; unsigned = True |
| |
| class Int8(CheckedInt): cxx_type = 'int8_t'; size = 8; unsigned = False |
| class UInt8(CheckedInt): cxx_type = 'uint8_t'; size = 8; unsigned = True |
| class Int16(CheckedInt): cxx_type = 'int16_t'; size = 16; unsigned = False |
| class UInt16(CheckedInt): cxx_type = 'uint16_t'; size = 16; unsigned = True |
| class Int32(CheckedInt): cxx_type = 'int32_t'; size = 32; unsigned = False |
| class UInt32(CheckedInt): cxx_type = 'uint32_t'; size = 32; unsigned = True |
| class Int64(CheckedInt): cxx_type = 'int64_t'; size = 64; unsigned = False |
| class UInt64(CheckedInt): cxx_type = 'uint64_t'; size = 64; unsigned = True |
| |
| class Counter(CheckedInt): cxx_type = 'Counter'; size = 64; unsigned = True |
| class Tick(CheckedInt): cxx_type = 'Tick'; size = 64; unsigned = True |
| class TcpPort(CheckedInt): cxx_type = 'uint16_t'; size = 16; unsigned = True |
| class UdpPort(CheckedInt): cxx_type = 'uint16_t'; size = 16; unsigned = True |
| |
| class Percent(CheckedInt): cxx_type = 'int'; min = 0; max = 100 |
| |
| class Cycles(CheckedInt): |
| cxx_type = 'Cycles' |
| size = 64 |
| unsigned = True |
| |
| def getValue(self): |
| from _m5.core import Cycles |
| return Cycles(self.value) |
| |
| @classmethod |
| def cxx_ini_predecls(cls, code): |
| # Assume that base/str.hh will be included anyway |
| # code('#include "base/str.hh"') |
| pass |
| |
| @classmethod |
| def cxx_ini_parse(cls, code, src, dest, ret): |
| code('uint64_t _temp;') |
| code('bool _ret = to_number(%s, _temp);' % src) |
| code('if (_ret)') |
| code(' %s = Cycles(_temp);' % dest) |
| code('%s _ret;' % ret) |
| |
| class Float(ParamValue, float): |
| cxx_type = 'double' |
| cmd_line_settable = True |
| |
| def __init__(self, value): |
| if isinstance(value, (int, long, float, NumericParamValue, Float, str)): |
| self.value = float(value) |
| else: |
| raise TypeError("Can't convert object of type %s to Float" \ |
| % type(value).__name__) |
| |
| def __call__(self, value): |
| self.__init__(value) |
| return value |
| |
| def getValue(self): |
| return float(self.value) |
| |
| def config_value(self): |
| return self |
| |
| @classmethod |
| def cxx_ini_predecls(cls, code): |
| code('#include <sstream>') |
| |
| @classmethod |
| def cxx_ini_parse(self, code, src, dest, ret): |
| code('%s (std::istringstream(%s) >> %s).eof();' % (ret, src, dest)) |
| |
| class MemorySize(CheckedInt): |
| cxx_type = 'uint64_t' |
| ex_str = '512MB' |
| size = 64 |
| unsigned = True |
| def __init__(self, value): |
| if isinstance(value, MemorySize): |
| self.value = value.value |
| else: |
| self.value = convert.toMemorySize(value) |
| self._check() |
| |
| class MemorySize32(CheckedInt): |
| cxx_type = 'uint32_t' |
| ex_str = '512MB' |
| size = 32 |
| unsigned = True |
| def __init__(self, value): |
| if isinstance(value, MemorySize): |
| self.value = value.value |
| else: |
| self.value = convert.toMemorySize(value) |
| self._check() |
| |
| class Addr(CheckedInt): |
| cxx_type = 'Addr' |
| size = 64 |
| unsigned = True |
| def __init__(self, value): |
| if isinstance(value, Addr): |
| self.value = value.value |
| else: |
| try: |
| # Often addresses are referred to with sizes. Ex: A device |
| # base address is at "512MB". Use toMemorySize() to convert |
| # these into addresses. If the address is not specified with a |
| # "size", an exception will occur and numeric translation will |
| # proceed below. |
| self.value = convert.toMemorySize(value) |
| except (TypeError, ValueError): |
| # Convert number to string and use long() to do automatic |
| # base conversion (requires base=0 for auto-conversion) |
| self.value = long(str(value), base=0) |
| |
| self._check() |
| def __add__(self, other): |
| if isinstance(other, Addr): |
| return self.value + other.value |
| else: |
| return self.value + other |
| def pretty_print(self, value): |
| try: |
| val = convert.toMemorySize(value) |
| except TypeError: |
| val = long(value) |
| return "0x%x" % long(val) |
| |
| class AddrRange(ParamValue): |
| cxx_type = 'AddrRange' |
| |
| def __init__(self, *args, **kwargs): |
| # Disable interleaving and hashing by default |
| self.intlvHighBit = 0 |
| self.xorHighBit = 0 |
| self.intlvBits = 0 |
| self.intlvMatch = 0 |
| |
| def handle_kwargs(self, kwargs): |
| # An address range needs to have an upper limit, specified |
| # either explicitly with an end, or as an offset using the |
| # size keyword. |
| if 'end' in kwargs: |
| self.end = Addr(kwargs.pop('end')) |
| elif 'size' in kwargs: |
| self.end = self.start + Addr(kwargs.pop('size')) - 1 |
| else: |
| raise TypeError("Either end or size must be specified") |
| |
| # Now on to the optional bit |
| if 'intlvHighBit' in kwargs: |
| self.intlvHighBit = int(kwargs.pop('intlvHighBit')) |
| if 'xorHighBit' in kwargs: |
| self.xorHighBit = int(kwargs.pop('xorHighBit')) |
| if 'intlvBits' in kwargs: |
| self.intlvBits = int(kwargs.pop('intlvBits')) |
| if 'intlvMatch' in kwargs: |
| self.intlvMatch = int(kwargs.pop('intlvMatch')) |
| |
| if len(args) == 0: |
| self.start = Addr(kwargs.pop('start')) |
| handle_kwargs(self, kwargs) |
| |
| elif len(args) == 1: |
| if kwargs: |
| self.start = Addr(args[0]) |
| handle_kwargs(self, kwargs) |
| elif isinstance(args[0], (list, tuple)): |
| self.start = Addr(args[0][0]) |
| self.end = Addr(args[0][1]) |
| else: |
| self.start = Addr(0) |
| self.end = Addr(args[0]) - 1 |
| |
| elif len(args) == 2: |
| self.start = Addr(args[0]) |
| self.end = Addr(args[1]) |
| else: |
| raise TypeError("Too many arguments specified") |
| |
| if kwargs: |
| raise TypeError("Too many keywords: %s" % list(kwargs.keys())) |
| |
| def __str__(self): |
| return '%s:%s:%s:%s:%s:%s' \ |
| % (self.start, self.end, self.intlvHighBit, self.xorHighBit,\ |
| self.intlvBits, self.intlvMatch) |
| |
| def size(self): |
| # Divide the size by the size of the interleaving slice |
| return (long(self.end) - long(self.start) + 1) >> self.intlvBits |
| |
| @classmethod |
| def cxx_predecls(cls, code): |
| Addr.cxx_predecls(code) |
| code('#include "base/addr_range.hh"') |
| |
| @classmethod |
| def pybind_predecls(cls, code): |
| Addr.pybind_predecls(code) |
| code('#include "base/addr_range.hh"') |
| |
| @classmethod |
| def cxx_ini_predecls(cls, code): |
| code('#include <sstream>') |
| |
| @classmethod |
| def cxx_ini_parse(cls, code, src, dest, ret): |
| code('uint64_t _start, _end, _intlvHighBit = 0, _xorHighBit = 0;') |
| code('uint64_t _intlvBits = 0, _intlvMatch = 0;') |
| code('char _sep;') |
| code('std::istringstream _stream(${src});') |
| code('_stream >> _start;') |
| code('_stream.get(_sep);') |
| code('_stream >> _end;') |
| code('if (!_stream.fail() && !_stream.eof()) {') |
| code(' _stream.get(_sep);') |
| code(' _stream >> _intlvHighBit;') |
| code(' _stream.get(_sep);') |
| code(' _stream >> _xorHighBit;') |
| code(' _stream.get(_sep);') |
| code(' _stream >> _intlvBits;') |
| code(' _stream.get(_sep);') |
| code(' _stream >> _intlvMatch;') |
| code('}') |
| code('bool _ret = !_stream.fail() &&' |
| '_stream.eof() && _sep == \':\';') |
| code('if (_ret)') |
| code(' ${dest} = AddrRange(_start, _end, _intlvHighBit, \ |
| _xorHighBit, _intlvBits, _intlvMatch);') |
| code('${ret} _ret;') |
| |
| def getValue(self): |
| # Go from the Python class to the wrapped C++ class |
| from _m5.range import AddrRange |
| |
| return AddrRange(long(self.start), long(self.end), |
| int(self.intlvHighBit), int(self.xorHighBit), |
| int(self.intlvBits), int(self.intlvMatch)) |
| |
| # Boolean parameter type. Python doesn't let you subclass bool, since |
| # it doesn't want to let you create multiple instances of True and |
| # False. Thus this is a little more complicated than String. |
| class Bool(ParamValue): |
| cxx_type = 'bool' |
| cmd_line_settable = True |
| |
| def __init__(self, value): |
| try: |
| self.value = convert.toBool(value) |
| except TypeError: |
| self.value = bool(value) |
| |
| def __call__(self, value): |
| self.__init__(value) |
| return value |
| |
| def getValue(self): |
| return bool(self.value) |
| |
| def __str__(self): |
| return str(self.value) |
| |
| # implement truth value testing for Bool parameters so that these params |
| # evaluate correctly during the python configuration phase |
| def __bool__(self): |
| return bool(self.value) |
| |
| # Python 2.7 uses __nonzero__ instead of __bool__ |
| __nonzero__ = __bool__ |
| |
| def ini_str(self): |
| if self.value: |
| return 'true' |
| return 'false' |
| |
| def config_value(self): |
| return self.value |
| |
| @classmethod |
| def cxx_ini_predecls(cls, code): |
| # Assume that base/str.hh will be included anyway |
| # code('#include "base/str.hh"') |
| pass |
| |
| @classmethod |
| def cxx_ini_parse(cls, code, src, dest, ret): |
| code('%s to_bool(%s, %s);' % (ret, src, dest)) |
| |
| def IncEthernetAddr(addr, val = 1): |
| bytes = [ int(x, 16) for x in addr.split(':') ] |
| bytes[5] += val |
| for i in (5, 4, 3, 2, 1): |
| val,rem = divmod(bytes[i], 256) |
| bytes[i] = rem |
| if val == 0: |
| break |
| bytes[i - 1] += val |
| assert(bytes[0] <= 255) |
| return ':'.join(map(lambda x: '%02x' % x, bytes)) |
| |
| _NextEthernetAddr = "00:90:00:00:00:01" |
| def NextEthernetAddr(): |
| global _NextEthernetAddr |
| |
| value = _NextEthernetAddr |
| _NextEthernetAddr = IncEthernetAddr(_NextEthernetAddr, 1) |
| return value |
| |
| class EthernetAddr(ParamValue): |
| cxx_type = 'Net::EthAddr' |
| ex_str = "00:90:00:00:00:01" |
| cmd_line_settable = True |
| |
| @classmethod |
| def cxx_predecls(cls, code): |
| code('#include "base/inet.hh"') |
| |
| def __init__(self, value): |
| if value == NextEthernetAddr: |
| self.value = value |
| return |
| |
| if not isinstance(value, str): |
| raise TypeError("expected an ethernet address and didn't get one") |
| |
| bytes = value.split(':') |
| if len(bytes) != 6: |
| raise TypeError('invalid ethernet address %s' % value) |
| |
| for byte in bytes: |
| if not 0 <= int(byte, base=16) <= 0xff: |
| raise TypeError('invalid ethernet address %s' % value) |
| |
| self.value = value |
| |
| def __call__(self, value): |
| self.__init__(value) |
| return value |
| |
| def unproxy(self, base): |
| if self.value == NextEthernetAddr: |
| return EthernetAddr(self.value()) |
| return self |
| |
| def getValue(self): |
| from _m5.net import EthAddr |
| return EthAddr(self.value) |
| |
| def __str__(self): |
| return self.value |
| |
| def ini_str(self): |
| return self.value |
| |
| @classmethod |
| def cxx_ini_parse(self, code, src, dest, ret): |
| code('%s = Net::EthAddr(%s);' % (dest, src)) |
| code('%s true;' % ret) |
| |
| # When initializing an IpAddress, pass in an existing IpAddress, a string of |
| # the form "a.b.c.d", or an integer representing an IP. |
| class IpAddress(ParamValue): |
| cxx_type = 'Net::IpAddress' |
| ex_str = "127.0.0.1" |
| cmd_line_settable = True |
| |
| @classmethod |
| def cxx_predecls(cls, code): |
| code('#include "base/inet.hh"') |
| |
| def __init__(self, value): |
| if isinstance(value, IpAddress): |
| self.ip = value.ip |
| else: |
| try: |
| self.ip = convert.toIpAddress(value) |
| except TypeError: |
| self.ip = long(value) |
| self.verifyIp() |
| |
| def __call__(self, value): |
| self.__init__(value) |
| return value |
| |
| def __str__(self): |
| tup = [(self.ip >> i) & 0xff for i in (24, 16, 8, 0)] |
| return '%d.%d.%d.%d' % tuple(tup) |
| |
| def __eq__(self, other): |
| if isinstance(other, IpAddress): |
| return self.ip == other.ip |
| elif isinstance(other, str): |
| try: |
| return self.ip == convert.toIpAddress(other) |
| except: |
| return False |
| else: |
| return self.ip == other |
| |
| def __ne__(self, other): |
| return not (self == other) |
| |
| def verifyIp(self): |
| if self.ip < 0 or self.ip >= (1 << 32): |
| raise TypeError("invalid ip address %#08x" % self.ip) |
| |
| def getValue(self): |
| from _m5.net import IpAddress |
| return IpAddress(self.ip) |
| |
| # When initializing an IpNetmask, pass in an existing IpNetmask, a string of |
| # the form "a.b.c.d/n" or "a.b.c.d/e.f.g.h", or an ip and netmask as |
| # positional or keyword arguments. |
| class IpNetmask(IpAddress): |
| cxx_type = 'Net::IpNetmask' |
| ex_str = "127.0.0.0/24" |
| cmd_line_settable = True |
| |
| @classmethod |
| def cxx_predecls(cls, code): |
| code('#include "base/inet.hh"') |
| |
| def __init__(self, *args, **kwargs): |
| def handle_kwarg(self, kwargs, key, elseVal = None): |
| if key in kwargs: |
| setattr(self, key, kwargs.pop(key)) |
| elif elseVal: |
| setattr(self, key, elseVal) |
| else: |
| raise TypeError("No value set for %s" % key) |
| |
| if len(args) == 0: |
| handle_kwarg(self, kwargs, 'ip') |
| handle_kwarg(self, kwargs, 'netmask') |
| |
| elif len(args) == 1: |
| if kwargs: |
| if not 'ip' in kwargs and not 'netmask' in kwargs: |
| raise TypeError("Invalid arguments") |
| handle_kwarg(self, kwargs, 'ip', args[0]) |
| handle_kwarg(self, kwargs, 'netmask', args[0]) |
| elif isinstance(args[0], IpNetmask): |
| self.ip = args[0].ip |
| self.netmask = args[0].netmask |
| else: |
| (self.ip, self.netmask) = convert.toIpNetmask(args[0]) |
| |
| elif len(args) == 2: |
| self.ip = args[0] |
| self.netmask = args[1] |
| else: |
| raise TypeError("Too many arguments specified") |
| |
| if kwargs: |
| raise TypeError("Too many keywords: %s" % list(kwargs.keys())) |
| |
| self.verify() |
| |
| def __call__(self, value): |
| self.__init__(value) |
| return value |
| |
| def __str__(self): |
| return "%s/%d" % (super(IpNetmask, self).__str__(), self.netmask) |
| |
| def __eq__(self, other): |
| if isinstance(other, IpNetmask): |
| return self.ip == other.ip and self.netmask == other.netmask |
| elif isinstance(other, str): |
| try: |
| return (self.ip, self.netmask) == convert.toIpNetmask(other) |
| except: |
| return False |
| else: |
| return False |
| |
| def verify(self): |
| self.verifyIp() |
| if self.netmask < 0 or self.netmask > 32: |
| raise TypeError("invalid netmask %d" % netmask) |
| |
| def getValue(self): |
| from _m5.net import IpNetmask |
| return IpNetmask(self.ip, self.netmask) |
| |
| # When initializing an IpWithPort, pass in an existing IpWithPort, a string of |
| # the form "a.b.c.d:p", or an ip and port as positional or keyword arguments. |
| class IpWithPort(IpAddress): |
| cxx_type = 'Net::IpWithPort' |
| ex_str = "127.0.0.1:80" |
| cmd_line_settable = True |
| |
| @classmethod |
| def cxx_predecls(cls, code): |
| code('#include "base/inet.hh"') |
| |
| def __init__(self, *args, **kwargs): |
| def handle_kwarg(self, kwargs, key, elseVal = None): |
| if key in kwargs: |
| setattr(self, key, kwargs.pop(key)) |
| elif elseVal: |
| setattr(self, key, elseVal) |
| else: |
| raise TypeError("No value set for %s" % key) |
| |
| if len(args) == 0: |
| handle_kwarg(self, kwargs, 'ip') |
| handle_kwarg(self, kwargs, 'port') |
| |
| elif len(args) == 1: |
| if kwargs: |
| if not 'ip' in kwargs and not 'port' in kwargs: |
| raise TypeError("Invalid arguments") |
| handle_kwarg(self, kwargs, 'ip', args[0]) |
| handle_kwarg(self, kwargs, 'port', args[0]) |
| elif isinstance(args[0], IpWithPort): |
| self.ip = args[0].ip |
| self.port = args[0].port |
| else: |
| (self.ip, self.port) = convert.toIpWithPort(args[0]) |
| |
| elif len(args) == 2: |
| self.ip = args[0] |
| self.port = args[1] |
| else: |
| raise TypeError("Too many arguments specified") |
| |
| if kwargs: |
| raise TypeError("Too many keywords: %s" % list(kwargs.keys())) |
| |
| self.verify() |
| |
| def __call__(self, value): |
| self.__init__(value) |
| return value |
| |
| def __str__(self): |
| return "%s:%d" % (super(IpWithPort, self).__str__(), self.port) |
| |
| def __eq__(self, other): |
| if isinstance(other, IpWithPort): |
| return self.ip == other.ip and self.port == other.port |
| elif isinstance(other, str): |
| try: |
| return (self.ip, self.port) == convert.toIpWithPort(other) |
| except: |
| return False |
| else: |
| return False |
| |
| def verify(self): |
| self.verifyIp() |
| if self.port < 0 or self.port > 0xffff: |
| raise TypeError("invalid port %d" % self.port) |
| |
| def getValue(self): |
| from _m5.net import IpWithPort |
| return IpWithPort(self.ip, self.port) |
| |
| time_formats = [ "%a %b %d %H:%M:%S %Z %Y", |
| "%a %b %d %H:%M:%S %Y", |
| "%Y/%m/%d %H:%M:%S", |
| "%Y/%m/%d %H:%M", |
| "%Y/%m/%d", |
| "%m/%d/%Y %H:%M:%S", |
| "%m/%d/%Y %H:%M", |
| "%m/%d/%Y", |
| "%m/%d/%y %H:%M:%S", |
| "%m/%d/%y %H:%M", |
| "%m/%d/%y"] |
| |
| |
| def parse_time(value): |
| from time import gmtime, strptime, struct_time, time |
| from datetime import datetime, date |
| |
| if isinstance(value, struct_time): |
| return value |
| |
| if isinstance(value, (int, long)): |
| return gmtime(value) |
| |
| if isinstance(value, (datetime, date)): |
| return value.timetuple() |
| |
| if isinstance(value, str): |
| if value in ('Now', 'Today'): |
| return time.gmtime(time.time()) |
| |
| for format in time_formats: |
| try: |
| return strptime(value, format) |
| except ValueError: |
| pass |
| |
| raise ValueError("Could not parse '%s' as a time" % value) |
| |
| class Time(ParamValue): |
| cxx_type = 'tm' |
| |
| @classmethod |
| def cxx_predecls(cls, code): |
| code('#include <time.h>') |
| |
| def __init__(self, value): |
| self.value = parse_time(value) |
| |
| def __call__(self, value): |
| self.__init__(value) |
| return value |
| |
| def getValue(self): |
| from _m5.core import tm |
| import calendar |
| |
| return tm.gmtime(calendar.timegm(self.value)) |
| |
| def __str__(self): |
| return time.asctime(self.value) |
| |
| def ini_str(self): |
| return str(self) |
| |
| def get_config_as_dict(self): |
| assert false |
| return str(self) |
| |
| @classmethod |
| def cxx_ini_predecls(cls, code): |
| code('#include <time.h>') |
| |
| @classmethod |
| def cxx_ini_parse(cls, code, src, dest, ret): |
| code('char *_parse_ret = strptime((${src}).c_str(),') |
| code(' "%a %b %d %H:%M:%S %Y", &(${dest}));') |
| code('${ret} _parse_ret && *_parse_ret == \'\\0\';'); |
| |
| # Enumerated types are a little more complex. The user specifies the |
| # type as Enum(foo) where foo is either a list or dictionary of |
| # alternatives (typically strings, but not necessarily so). (In the |
| # long run, the integer value of the parameter will be the list index |
| # or the corresponding dictionary value. For now, since we only check |
| # that the alternative is valid and then spit it into a .ini file, |
| # there's not much point in using the dictionary.) |
| |
| # What Enum() must do is generate a new type encapsulating the |
| # provided list/dictionary so that specific values of the parameter |
| # can be instances of that type. We define two hidden internal |
| # classes (_ListEnum and _DictEnum) to serve as base classes, then |
| # derive the new type from the appropriate base class on the fly. |
| |
| allEnums = {} |
| # Metaclass for Enum types |
| class MetaEnum(MetaParamValue): |
| def __new__(mcls, name, bases, dict): |
| assert name not in allEnums |
| |
| cls = super(MetaEnum, mcls).__new__(mcls, name, bases, dict) |
| allEnums[name] = cls |
| return cls |
| |
| def __init__(cls, name, bases, init_dict): |
| if 'map' in init_dict: |
| if not isinstance(cls.map, dict): |
| raise TypeError("Enum-derived class attribute 'map' " \ |
| "must be of type dict") |
| # build list of value strings from map |
| cls.vals = list(cls.map.keys()) |
| cls.vals.sort() |
| elif 'vals' in init_dict: |
| if not isinstance(cls.vals, list): |
| raise TypeError("Enum-derived class attribute 'vals' " \ |
| "must be of type list") |
| # build string->value map from vals sequence |
| cls.map = {} |
| for idx,val in enumerate(cls.vals): |
| cls.map[val] = idx |
| else: |
| raise TypeError("Enum-derived class must define "\ |
| "attribute 'map' or 'vals'") |
| |
| if cls.is_class: |
| cls.cxx_type = '%s' % name |
| else: |
| cls.cxx_type = 'Enums::%s' % name |
| |
| super(MetaEnum, cls).__init__(name, bases, init_dict) |
| |
| # Generate C++ class declaration for this enum type. |
| # Note that we wrap the enum in a class/struct to act as a namespace, |
| # so that the enum strings can be brief w/o worrying about collisions. |
| def cxx_decl(cls, code): |
| wrapper_name = cls.wrapper_name |
| wrapper = 'struct' if cls.wrapper_is_struct else 'namespace' |
| name = cls.__name__ if cls.enum_name is None else cls.enum_name |
| idem_macro = '__ENUM__%s__%s__' % (wrapper_name, name) |
| |
| code('''\ |
| #ifndef $idem_macro |
| #define $idem_macro |
| |
| ''') |
| if cls.is_class: |
| code('''\ |
| enum class $name { |
| ''') |
| else: |
| code('''\ |
| $wrapper $wrapper_name { |
| enum $name { |
| ''') |
| code.indent(1) |
| code.indent(1) |
| for val in cls.vals: |
| code('$val = ${{cls.map[val]}},') |
| code('Num_$name = ${{len(cls.vals)}}') |
| code.dedent(1) |
| code('};') |
| |
| if cls.is_class: |
| code('''\ |
| extern const char *${name}Strings[static_cast<int>(${name}::Num_${name})]; |
| ''') |
| elif cls.wrapper_is_struct: |
| code('static const char *${name}Strings[Num_${name}];') |
| else: |
| code('extern const char *${name}Strings[Num_${name}];') |
| |
| if not cls.is_class: |
| code.dedent(1) |
| code('};') |
| |
| code() |
| code('#endif // $idem_macro') |
| |
| def cxx_def(cls, code): |
| wrapper_name = cls.wrapper_name |
| file_name = cls.__name__ |
| name = cls.__name__ if cls.enum_name is None else cls.enum_name |
| |
| code('#include "enums/$file_name.hh"') |
| if cls.wrapper_is_struct: |
| code('const char *${wrapper_name}::${name}Strings' |
| '[Num_${name}] =') |
| else: |
| if cls.is_class: |
| code('''\ |
| const char *${name}Strings[static_cast<int>(${name}::Num_${name})] = |
| ''') |
| else: |
| code('namespace Enums {') |
| code.indent(1) |
| code('const char *${name}Strings[Num_${name}] =') |
| |
| code('{') |
| code.indent(1) |
| for val in cls.vals: |
| code('"$val",') |
| code.dedent(1) |
| code('};') |
| |
| if not cls.wrapper_is_struct and not cls.is_class: |
| code.dedent(1) |
| code('} // namespace $wrapper_name') |
| |
| |
| def pybind_def(cls, code): |
| name = cls.__name__ |
| enum_name = cls.__name__ if cls.enum_name is None else cls.enum_name |
| wrapper_name = enum_name if cls.is_class else cls.wrapper_name |
| |
| code('''#include "pybind11/pybind11.h" |
| #include "pybind11/stl.h" |
| |
| #include <sim/init.hh> |
| |
| namespace py = pybind11; |
| |
| static void |
| module_init(py::module &m_internal) |
| { |
| py::module m = m_internal.def_submodule("enum_${name}"); |
| |
| ''') |
| if cls.is_class: |
| code('py::enum_<${enum_name}>(m, "enum_${name}")') |
| else: |
| code('py::enum_<${wrapper_name}::${enum_name}>(m, "enum_${name}")') |
| |
| code.indent() |
| code.indent() |
| for val in cls.vals: |
| code('.value("${val}", ${wrapper_name}::${val})') |
| code('.value("Num_${name}", ${wrapper_name}::Num_${enum_name})') |
| code('.export_values()') |
| code(';') |
| code.dedent() |
| |
| code('}') |
| code.dedent() |
| code() |
| code('static EmbeddedPyBind embed_enum("enum_${name}", module_init);') |
| |
| |
| # Base class for enum types. |
| class Enum(ParamValue): |
| __metaclass__ = MetaEnum |
| vals = [] |
| cmd_line_settable = True |
| |
| # The name of the wrapping namespace or struct |
| wrapper_name = 'Enums' |
| |
| # If true, the enum is wrapped in a struct rather than a namespace |
| wrapper_is_struct = False |
| |
| is_class = False |
| |
| # If not None, use this as the enum name rather than this class name |
| enum_name = None |
| |
| def __init__(self, value): |
| if value not in self.map: |
| raise TypeError("Enum param got bad value '%s' (not in %s)" \ |
| % (value, self.vals)) |
| self.value = value |
| |
| def __call__(self, value): |
| self.__init__(value) |
| return value |
| |
| @classmethod |
| def cxx_predecls(cls, code): |
| code('#include "enums/$0.hh"', cls.__name__) |
| |
| @classmethod |
| def cxx_ini_parse(cls, code, src, dest, ret): |
| code('if (false) {') |
| for elem_name in cls.map.keys(): |
| code('} else if (%s == "%s") {' % (src, elem_name)) |
| code.indent() |
| code('%s = Enums::%s;' % (dest, elem_name)) |
| code('%s true;' % ret) |
| code.dedent() |
| code('} else {') |
| code(' %s false;' % ret) |
| code('}') |
| |
| def getValue(self): |
| import m5.internal.params |
| e = getattr(m5.internal.params, "enum_%s" % self.__class__.__name__) |
| return e(self.map[self.value]) |
| |
| def __str__(self): |
| return self.value |
| |
| # This param will generate a scoped c++ enum and its python bindings. |
| class ScopedEnum(Enum): |
| __metaclass__ = MetaEnum |
| vals = [] |
| cmd_line_settable = True |
| |
| # The name of the wrapping namespace or struct |
| wrapper_name = None |
| |
| # If true, the enum is wrapped in a struct rather than a namespace |
| wrapper_is_struct = False |
| |
| # If true, the generated enum is a scoped enum |
| is_class = True |
| |
| # If not None, use this as the enum name rather than this class name |
| enum_name = None |
| |
| # how big does a rounding error need to be before we warn about it? |
| frequency_tolerance = 0.001 # 0.1% |
| |
| class TickParamValue(NumericParamValue): |
| cxx_type = 'Tick' |
| ex_str = "1MHz" |
| cmd_line_settable = True |
| |
| @classmethod |
| def cxx_predecls(cls, code): |
| code('#include "base/types.hh"') |
| |
| def __call__(self, value): |
| self.__init__(value) |
| return value |
| |
| def getValue(self): |
| return long(self.value) |
| |
| @classmethod |
| def cxx_ini_predecls(cls, code): |
| code('#include <sstream>') |
| |
| # Ticks are expressed in seconds in JSON files and in plain |
| # Ticks in .ini files. Switch based on a config flag |
| @classmethod |
| def cxx_ini_parse(self, code, src, dest, ret): |
| code('${ret} to_number(${src}, ${dest});') |
| |
| class Latency(TickParamValue): |
| ex_str = "100ns" |
| |
| def __init__(self, value): |
| if isinstance(value, (Latency, Clock)): |
| self.ticks = value.ticks |
| self.value = value.value |
| elif isinstance(value, Frequency): |
| self.ticks = value.ticks |
| self.value = 1.0 / value.value |
| elif value.endswith('t'): |
| self.ticks = True |
| self.value = int(value[:-1]) |
| else: |
| self.ticks = False |
| self.value = convert.toLatency(value) |
| |
| def __call__(self, value): |
| self.__init__(value) |
| return value |
| |
| def __getattr__(self, attr): |
| if attr in ('latency', 'period'): |
| return self |
| if attr == 'frequency': |
| return Frequency(self) |
| raise AttributeError("Latency object has no attribute '%s'" % attr) |
| |
| def getValue(self): |
| if self.ticks or self.value == 0: |
| value = self.value |
| else: |
| value = ticks.fromSeconds(self.value) |
| return long(value) |
| |
| def config_value(self): |
| return self.getValue() |
| |
| # convert latency to ticks |
| def ini_str(self): |
| return '%d' % self.getValue() |
| |
| class Frequency(TickParamValue): |
| ex_str = "1GHz" |
| |
| def __init__(self, value): |
| if isinstance(value, (Latency, Clock)): |
| if value.value == 0: |
| self.value = 0 |
| else: |
| self.value = 1.0 / value.value |
| self.ticks = value.ticks |
| elif isinstance(value, Frequency): |
| self.value = value.value |
| self.ticks = value.ticks |
| else: |
| self.ticks = False |
| self.value = convert.toFrequency(value) |
| |
| def __call__(self, value): |
| self.__init__(value) |
| return value |
| |
| def __getattr__(self, attr): |
| if attr == 'frequency': |
| return self |
| if attr in ('latency', 'period'): |
| return Latency(self) |
| raise AttributeError("Frequency object has no attribute '%s'" % attr) |
| |
| # convert latency to ticks |
| def getValue(self): |
| if self.ticks or self.value == 0: |
| value = self.value |
| else: |
| value = ticks.fromSeconds(1.0 / self.value) |
| return long(value) |
| |
| def config_value(self): |
| return self.getValue() |
| |
| def ini_str(self): |
| return '%d' % self.getValue() |
| |
| # A generic Frequency and/or Latency value. Value is stored as a |
| # latency, just like Latency and Frequency. |
| class Clock(TickParamValue): |
| def __init__(self, value): |
| if isinstance(value, (Latency, Clock)): |
| self.ticks = value.ticks |
| self.value = value.value |
| elif isinstance(value, Frequency): |
| self.ticks = value.ticks |
| self.value = 1.0 / value.value |
| elif value.endswith('t'): |
| self.ticks = True |
| self.value = int(value[:-1]) |
| else: |
| self.ticks = False |
| self.value = convert.anyToLatency(value) |
| |
| def __call__(self, value): |
| self.__init__(value) |
| return value |
| |
| def __str__(self): |
| return "%s" % Latency(self) |
| |
| def __getattr__(self, attr): |
| if attr == 'frequency': |
| return Frequency(self) |
| if attr in ('latency', 'period'): |
| return Latency(self) |
| raise AttributeError("Frequency object has no attribute '%s'" % attr) |
| |
| def getValue(self): |
| return self.period.getValue() |
| |
| def config_value(self): |
| return self.period.config_value() |
| |
| def ini_str(self): |
| return self.period.ini_str() |
| |
| class Voltage(Float): |
| ex_str = "1V" |
| |
| def __new__(cls, value): |
| value = convert.toVoltage(value) |
| return super(cls, Voltage).__new__(cls, value) |
| |
| def __init__(self, value): |
| value = convert.toVoltage(value) |
| super(Voltage, self).__init__(value) |
| |
| class Current(Float): |
| ex_str = "1mA" |
| |
| def __new__(cls, value): |
| value = convert.toCurrent(value) |
| return super(cls, Current).__new__(cls, value) |
| |
| def __init__(self, value): |
| value = convert.toCurrent(value) |
| super(Current, self).__init__(value) |
| |
| class Energy(Float): |
| ex_str = "1pJ" |
| |
| def __new__(cls, value): |
| value = convert.toEnergy(value) |
| return super(cls, Energy).__new__(cls, value) |
| |
| def __init__(self, value): |
| value = convert.toEnergy(value) |
| super(Energy, self).__init__(value) |
| |
| class NetworkBandwidth(float,ParamValue): |
| cxx_type = 'float' |
| ex_str = "1Gbps" |
| cmd_line_settable = True |
| |
| def __new__(cls, value): |
| # convert to bits per second |
| val = convert.toNetworkBandwidth(value) |
| return super(cls, NetworkBandwidth).__new__(cls, val) |
| |
| def __str__(self): |
| return str(self.val) |
| |
| def __call__(self, value): |
| val = convert.toNetworkBandwidth(value) |
| self.__init__(val) |
| return value |
| |
| def getValue(self): |
| # convert to seconds per byte |
| value = 8.0 / float(self) |
| # convert to ticks per byte |
| value = ticks.fromSeconds(value) |
| return float(value) |
| |
| def ini_str(self): |
| return '%f' % self.getValue() |
| |
| def config_value(self): |
| return '%f' % self.getValue() |
| |
| @classmethod |
| def cxx_ini_predecls(cls, code): |
| code('#include <sstream>') |
| |
| @classmethod |
| def cxx_ini_parse(self, code, src, dest, ret): |
| code('%s (std::istringstream(%s) >> %s).eof();' % (ret, src, dest)) |
| |
| class MemoryBandwidth(float,ParamValue): |
| cxx_type = 'float' |
| ex_str = "1GB/s" |
| cmd_line_settable = True |
| |
| def __new__(cls, value): |
| # convert to bytes per second |
| val = convert.toMemoryBandwidth(value) |
| return super(cls, MemoryBandwidth).__new__(cls, val) |
| |
| def __call__(self, value): |
| val = convert.toMemoryBandwidth(value) |
| self.__init__(val) |
| return value |
| |
| def getValue(self): |
| # convert to seconds per byte |
| value = float(self) |
| if value: |
| value = 1.0 / float(self) |
| # convert to ticks per byte |
| value = ticks.fromSeconds(value) |
| return float(value) |
| |
| def ini_str(self): |
| return '%f' % self.getValue() |
| |
| def config_value(self): |
| return '%f' % self.getValue() |
| |
| @classmethod |
| def cxx_ini_predecls(cls, code): |
| code('#include <sstream>') |
| |
| @classmethod |
| def cxx_ini_parse(self, code, src, dest, ret): |
| code('%s (std::istringstream(%s) >> %s).eof();' % (ret, src, dest)) |
| |
| # |
| # "Constants"... handy aliases for various values. |
| # |
| |
| # Special class for NULL pointers. Note the special check in |
| # make_param_value() above that lets these be assigned where a |
| # SimObject is required. |
| # only one copy of a particular node |
| class NullSimObject(object): |
| __metaclass__ = Singleton |
| _name = 'Null' |
| |
| def __call__(cls): |
| return cls |
| |
| def _instantiate(self, parent = None, path = ''): |
| pass |
| |
| def ini_str(self): |
| return 'Null' |
| |
| def unproxy(self, base): |
| return self |
| |
| def set_path(self, parent, name): |
| pass |
| |
| def set_parent(self, parent, name): |
| pass |
| |
| def clear_parent(self, old_parent): |
| pass |
| |
| def descendants(self): |
| return |
| yield None |
| |
| def get_config_as_dict(self): |
| return {} |
| |
| def __str__(self): |
| return self._name |
| |
| def config_value(self): |
| return None |
| |
| def getValue(self): |
| return None |
| |
| # The only instance you'll ever need... |
| NULL = NullSimObject() |
| |
| def isNullPointer(value): |
| return isinstance(value, NullSimObject) |
| |
| # Some memory range specifications use this as a default upper bound. |
| MaxAddr = Addr.max |
| MaxTick = Tick.max |
| AllMemory = AddrRange(0, MaxAddr) |
| |
| |
| ##################################################################### |
| # |
| # Port objects |
| # |
| # Ports are used to interconnect objects in the memory system. |
| # |
| ##################################################################### |
| |
| # Port reference: encapsulates a reference to a particular port on a |
| # particular SimObject. |
| class PortRef(object): |
| def __init__(self, simobj, name, role): |
| assert(isSimObject(simobj) or isSimObjectClass(simobj)) |
| self.simobj = simobj |
| self.name = name |
| self.role = role |
| self.peer = None # not associated with another port yet |
| self.ccConnected = False # C++ port connection done? |
| self.index = -1 # always -1 for non-vector ports |
| |
| def __str__(self): |
| return '%s.%s' % (self.simobj, self.name) |
| |
| def __len__(self): |
| # Return the number of connected ports, i.e. 0 is we have no |
| # peer and 1 if we do. |
| return int(self.peer != None) |
| |
| # for config.ini, print peer's name (not ours) |
| def ini_str(self): |
| return str(self.peer) |
| |
| # for config.json |
| def get_config_as_dict(self): |
| return {'role' : self.role, 'peer' : str(self.peer)} |
| |
| def __getattr__(self, attr): |
| if attr == 'peerObj': |
| # shorthand for proxies |
| return self.peer.simobj |
| raise AttributeError("'%s' object has no attribute '%s'" % \ |
| (self.__class__.__name__, attr)) |
| |
| # Full connection is symmetric (both ways). Called via |
| # SimObject.__setattr__ as a result of a port assignment, e.g., |
| # "obj1.portA = obj2.portB", or via VectorPortElementRef.__setitem__, |
| # e.g., "obj1.portA[3] = obj2.portB". |
| def connect(self, other): |
| if isinstance(other, VectorPortRef): |
| # reference to plain VectorPort is implicit append |
| other = other._get_next() |
| if self.peer and not proxy.isproxy(self.peer): |
| fatal("Port %s is already connected to %s, cannot connect %s\n", |
| self, self.peer, other); |
| self.peer = other |
| if proxy.isproxy(other): |
| other.set_param_desc(PortParamDesc()) |
| elif isinstance(other, PortRef): |
| if other.peer is not self: |
| other.connect(self) |
| else: |
| raise TypeError("assigning non-port reference '%s' to port '%s'" \ |
| % (other, self)) |
| |
| # Allow a master/slave port pair to be spliced between |
| # a port and its connected peer. Useful operation for connecting |
| # instrumentation structures into a system when it is necessary |
| # to connect the instrumentation after the full system has been |
| # constructed. |
| def splice(self, new_master_peer, new_slave_peer): |
| if not self.peer or proxy.isproxy(self.peer): |
| fatal("Port %s not connected, cannot splice in new peers\n", self) |
| |
| if not isinstance(new_master_peer, PortRef) or \ |
| not isinstance(new_slave_peer, PortRef): |
| raise TypeError( |
| "Splicing non-port references '%s','%s' to port '%s'" % \ |
| (new_master_peer, new_slave_peer, self)) |
| |
| old_peer = self.peer |
| if self.role == 'SLAVE': |
| self.peer = new_master_peer |
| old_peer.peer = new_slave_peer |
| new_master_peer.connect(self) |
| new_slave_peer.connect(old_peer) |
| elif self.role == 'MASTER': |
| self.peer = new_slave_peer |
| old_peer.peer = new_master_peer |
| new_slave_peer.connect(self) |
| new_master_peer.connect(old_peer) |
| else: |
| panic("Port %s has unknown role, "+\ |
| "cannot splice in new peers\n", self) |
| |
| def clone(self, simobj, memo): |
| if self in memo: |
| return memo[self] |
| newRef = copy.copy(self) |
| memo[self] = newRef |
| newRef.simobj = simobj |
| assert(isSimObject(newRef.simobj)) |
| if self.peer and not proxy.isproxy(self.peer): |
| peerObj = self.peer.simobj(_memo=memo) |
| newRef.peer = self.peer.clone(peerObj, memo) |
| assert(not isinstance(newRef.peer, VectorPortRef)) |
| return newRef |
| |
| def unproxy(self, simobj): |
| assert(simobj is self.simobj) |
| if proxy.isproxy(self.peer): |
| try: |
| realPeer = self.peer.unproxy(self.simobj) |
| except: |
| print("Error in unproxying port '%s' of %s" % |
| (self.name, self.simobj.path())) |
| raise |
| self.connect(realPeer) |
| |
| # Call C++ to create corresponding port connection between C++ objects |
| def ccConnect(self): |
| if self.ccConnected: # already done this |
| return |
| |
| peer = self.peer |
| if not self.peer: # nothing to connect to |
| return |
| |
| port = self.simobj.getPort(self.name, self.index) |
| peer_port = peer.simobj.getPort(peer.name, peer.index) |
| port.bind(peer_port) |
| |
| self.ccConnected = True |
| |
| # A reference to an individual element of a VectorPort... much like a |
| # PortRef, but has an index. |
| class VectorPortElementRef(PortRef): |
| def __init__(self, simobj, name, role, index): |
| PortRef.__init__(self, simobj, name, role) |
| self.index = index |
| |
| def __str__(self): |
| return '%s.%s[%d]' % (self.simobj, self.name, self.index) |
| |
| # A reference to a complete vector-valued port (not just a single element). |
| # Can be indexed to retrieve individual VectorPortElementRef instances. |
| class VectorPortRef(object): |
| def __init__(self, simobj, name, role): |
| assert(isSimObject(simobj) or isSimObjectClass(simobj)) |
| self.simobj = simobj |
| self.name = name |
| self.role = role |
| self.elements = [] |
| |
| def __str__(self): |
| return '%s.%s[:]' % (self.simobj, self.name) |
| |
| def __len__(self): |
| # Return the number of connected peers, corresponding the the |
| # length of the elements. |
| return len(self.elements) |
| |
| # for config.ini, print peer's name (not ours) |
| def ini_str(self): |
| return ' '.join([el.ini_str() for el in self.elements]) |
| |
| # for config.json |
| def get_config_as_dict(self): |
| return {'role' : self.role, |
| 'peer' : [el.ini_str() for el in self.elements]} |
| |
| def __getitem__(self, key): |
| if not isinstance(key, int): |
| raise TypeError("VectorPort index must be integer") |
| if key >= len(self.elements): |
| # need to extend list |
| ext = [VectorPortElementRef(self.simobj, self.name, self.role, i) |
| for i in range(len(self.elements), key+1)] |
| self.elements.extend(ext) |
| return self.elements[key] |
| |
| def _get_next(self): |
| return self[len(self.elements)] |
| |
| def __setitem__(self, key, value): |
| if not isinstance(key, int): |
| raise TypeError("VectorPort index must be integer") |
| self[key].connect(value) |
| |
| def connect(self, other): |
| if isinstance(other, (list, tuple)): |
| # Assign list of port refs to vector port. |
| # For now, append them... not sure if that's the right semantics |
| # or if it should replace the current vector. |
| for ref in other: |
| self._get_next().connect(ref) |
| else: |
| # scalar assignment to plain VectorPort is implicit append |
| self._get_next().connect(other) |
| |
| def clone(self, simobj, memo): |
| if self in memo: |
| return memo[self] |
| newRef = copy.copy(self) |
| memo[self] = newRef |
| newRef.simobj = simobj |
| assert(isSimObject(newRef.simobj)) |
| newRef.elements = [el.clone(simobj, memo) for el in self.elements] |
| return newRef |
| |
| def unproxy(self, simobj): |
| [el.unproxy(simobj) for el in self.elements] |
| |
| def ccConnect(self): |
| [el.ccConnect() for el in self.elements] |
| |
| # Port description object. Like a ParamDesc object, this represents a |
| # logical port in the SimObject class, not a particular port on a |
| # SimObject instance. The latter are represented by PortRef objects. |
| class Port(object): |
| # Generate a PortRef for this port on the given SimObject with the |
| # given name |
| def makeRef(self, simobj): |
| return PortRef(simobj, self.name, self.role) |
| |
| # Connect an instance of this port (on the given SimObject with |
| # the given name) with the port described by the supplied PortRef |
| def connect(self, simobj, ref): |
| self.makeRef(simobj).connect(ref) |
| |
| # No need for any pre-declarations at the moment as we merely rely |
| # on an unsigned int. |
| def cxx_predecls(self, code): |
| pass |
| |
| def pybind_predecls(self, code): |
| cls.cxx_predecls(self, code) |
| |
| # Declare an unsigned int with the same name as the port, that |
| # will eventually hold the number of connected ports (and thus the |
| # number of elements for a VectorPort). |
| def cxx_decl(self, code): |
| code('unsigned int port_${{self.name}}_connection_count;') |
| |
| class MasterPort(Port): |
| # MasterPort("description") |
| def __init__(self, *args): |
| if len(args) == 1: |
| self.desc = args[0] |
| self.role = 'MASTER' |
| else: |
| raise TypeError('wrong number of arguments') |
| |
| class SlavePort(Port): |
| # SlavePort("description") |
| def __init__(self, *args): |
| if len(args) == 1: |
| self.desc = args[0] |
| self.role = 'SLAVE' |
| else: |
| raise TypeError('wrong number of arguments') |
| |
| # VectorPort description object. Like Port, but represents a vector |
| # of connections (e.g., as on a XBar). |
| class VectorPort(Port): |
| def __init__(self, *args): |
| self.isVec = True |
| |
| def makeRef(self, simobj): |
| return VectorPortRef(simobj, self.name, self.role) |
| |
| class VectorMasterPort(VectorPort): |
| # VectorMasterPort("description") |
| def __init__(self, *args): |
| if len(args) == 1: |
| self.desc = args[0] |
| self.role = 'MASTER' |
| VectorPort.__init__(self, *args) |
| else: |
| raise TypeError('wrong number of arguments') |
| |
| class VectorSlavePort(VectorPort): |
| # VectorSlavePort("description") |
| def __init__(self, *args): |
| if len(args) == 1: |
| self.desc = args[0] |
| self.role = 'SLAVE' |
| VectorPort.__init__(self, *args) |
| else: |
| raise TypeError('wrong number of arguments') |
| |
| # 'Fake' ParamDesc for Port references to assign to the _pdesc slot of |
| # proxy objects (via set_param_desc()) so that proxy error messages |
| # make sense. |
| class PortParamDesc(object): |
| __metaclass__ = Singleton |
| |
| ptype_str = 'Port' |
| ptype = Port |
| |
| baseEnums = allEnums.copy() |
| baseParams = allParams.copy() |
| |
| def clear(): |
| global allEnums, allParams |
| |
| allEnums = baseEnums.copy() |
| allParams = baseParams.copy() |
| |
| __all__ = ['Param', 'VectorParam', |
| 'Enum', 'ScopedEnum', 'Bool', 'String', 'Float', |
| 'Int', 'Unsigned', 'Int8', 'UInt8', 'Int16', 'UInt16', |
| 'Int32', 'UInt32', 'Int64', 'UInt64', |
| 'Counter', 'Addr', 'Tick', 'Percent', |
| 'TcpPort', 'UdpPort', 'EthernetAddr', |
| 'IpAddress', 'IpNetmask', 'IpWithPort', |
| 'MemorySize', 'MemorySize32', |
| 'Latency', 'Frequency', 'Clock', 'Voltage', 'Current', 'Energy', |
| 'NetworkBandwidth', 'MemoryBandwidth', |
| 'AddrRange', |
| 'MaxAddr', 'MaxTick', 'AllMemory', |
| 'Time', |
| 'NextEthernetAddr', 'NULL', |
| 'MasterPort', 'SlavePort', |
| 'VectorMasterPort', 'VectorSlavePort'] |
