| |
| ---------- Begin Simulation Statistics ---------- |
| sim_seconds 0.000423 # Number of seconds simulated |
| sim_ticks 423127000 # Number of ticks simulated |
| final_tick 423127000 # Number of ticks from beginning of simulation (restored from checkpoints and never reset) |
| sim_freq 1000000000000 # Frequency of simulated ticks |
| host_inst_rate 225323 # Simulator instruction rate (inst/s) |
| host_op_rate 225118 # Simulator op (including micro ops) rate (op/s) |
| host_tick_rate 16871799532 # Simulator tick rate (ticks/s) |
| host_mem_usage 632064 # Number of bytes of host memory used |
| host_seconds 0.03 # Real time elapsed on the host |
| sim_insts 5641 # Number of instructions simulated |
| sim_ops 5641 # Number of ops (including micro ops) simulated |
| system.clk_domain.voltage_domain.voltage 1 # Voltage in Volts |
| system.clk_domain.clock 1000 # Clock period in ticks |
| system.mem_ctrl.pwrStateResidencyTicks::UNDEFINED 423127000 # Cumulative time (in ticks) in various power states |
| system.mem_ctrl.bytes_read::cpu.inst 22568 # Number of bytes read from this memory |
| system.mem_ctrl.bytes_read::cpu.data 4301 # Number of bytes read from this memory |
| system.mem_ctrl.bytes_read::total 26869 # Number of bytes read from this memory |
| system.mem_ctrl.bytes_inst_read::cpu.inst 22568 # Number of instructions bytes read from this memory |
| system.mem_ctrl.bytes_inst_read::total 22568 # Number of instructions bytes read from this memory |
| system.mem_ctrl.bytes_written::cpu.data 3601 # Number of bytes written to this memory |
| system.mem_ctrl.bytes_written::total 3601 # Number of bytes written to this memory |
| system.mem_ctrl.num_reads::cpu.inst 5642 # Number of read requests responded to by this memory |
| system.mem_ctrl.num_reads::cpu.data 1135 # Number of read requests responded to by this memory |
| system.mem_ctrl.num_reads::total 6777 # Number of read requests responded to by this memory |
| system.mem_ctrl.num_writes::cpu.data 901 # Number of write requests responded to by this memory |
| system.mem_ctrl.num_writes::total 901 # Number of write requests responded to by this memory |
| system.mem_ctrl.bw_read::cpu.inst 53336232 # Total read bandwidth from this memory (bytes/s) |
| system.mem_ctrl.bw_read::cpu.data 10164797 # Total read bandwidth from this memory (bytes/s) |
| system.mem_ctrl.bw_read::total 63501029 # Total read bandwidth from this memory (bytes/s) |
| system.mem_ctrl.bw_inst_read::cpu.inst 53336232 # Instruction read bandwidth from this memory (bytes/s) |
| system.mem_ctrl.bw_inst_read::total 53336232 # Instruction read bandwidth from this memory (bytes/s) |
| system.mem_ctrl.bw_write::cpu.data 8510447 # Write bandwidth from this memory (bytes/s) |
| system.mem_ctrl.bw_write::total 8510447 # Write bandwidth from this memory (bytes/s) |
| system.mem_ctrl.bw_total::cpu.inst 53336232 # Total bandwidth to/from this memory (bytes/s) |
| system.mem_ctrl.bw_total::cpu.data 18675244 # Total bandwidth to/from this memory (bytes/s) |
| system.mem_ctrl.bw_total::total 72011476 # Total bandwidth to/from this memory (bytes/s) |
| system.mem_ctrl.readReqs 6778 # Number of read requests accepted |
| system.mem_ctrl.writeReqs 901 # Number of write requests accepted |
| system.mem_ctrl.readBursts 6778 # Number of DRAM read bursts, including those serviced by the write queue |
| system.mem_ctrl.writeBursts 901 # Number of DRAM write bursts, including those merged in the write queue |
| system.mem_ctrl.bytesReadDRAM 427712 # Total number of bytes read from DRAM |
| system.mem_ctrl.bytesReadWrQ 6080 # Total number of bytes read from write queue |
| system.mem_ctrl.bytesWritten 4096 # Total number of bytes written to DRAM |
| system.mem_ctrl.bytesReadSys 26873 # Total read bytes from the system interface side |
| system.mem_ctrl.bytesWrittenSys 3601 # Total written bytes from the system interface side |
| system.mem_ctrl.servicedByWrQ 95 # Number of DRAM read bursts serviced by the write queue |
| system.mem_ctrl.mergedWrBursts 808 # Number of DRAM write bursts merged with an existing one |
| system.mem_ctrl.neitherReadNorWriteReqs 0 # Number of requests that are neither read nor write |
| system.mem_ctrl.perBankRdBursts::0 275 # Per bank write bursts |
| system.mem_ctrl.perBankRdBursts::1 0 # Per bank write bursts |
| system.mem_ctrl.perBankRdBursts::2 0 # Per bank write bursts |
| system.mem_ctrl.perBankRdBursts::3 0 # Per bank write bursts |
| system.mem_ctrl.perBankRdBursts::4 215 # Per bank write bursts |
| system.mem_ctrl.perBankRdBursts::5 18 # Per bank write bursts |
| system.mem_ctrl.perBankRdBursts::6 105 # Per bank write bursts |
| system.mem_ctrl.perBankRdBursts::7 516 # Per bank write bursts |
| system.mem_ctrl.perBankRdBursts::8 543 # Per bank write bursts |
| system.mem_ctrl.perBankRdBursts::9 1212 # Per bank write bursts |
| system.mem_ctrl.perBankRdBursts::10 899 # Per bank write bursts |
| system.mem_ctrl.perBankRdBursts::11 350 # Per bank write bursts |
| system.mem_ctrl.perBankRdBursts::12 677 # Per bank write bursts |
| system.mem_ctrl.perBankRdBursts::13 398 # Per bank write bursts |
| system.mem_ctrl.perBankRdBursts::14 1426 # Per bank write bursts |
| system.mem_ctrl.perBankRdBursts::15 49 # Per bank write bursts |
| system.mem_ctrl.perBankWrBursts::0 0 # Per bank write bursts |
| system.mem_ctrl.perBankWrBursts::1 0 # Per bank write bursts |
| system.mem_ctrl.perBankWrBursts::2 0 # Per bank write bursts |
| system.mem_ctrl.perBankWrBursts::3 0 # Per bank write bursts |
| system.mem_ctrl.perBankWrBursts::4 0 # Per bank write bursts |
| system.mem_ctrl.perBankWrBursts::5 0 # Per bank write bursts |
| system.mem_ctrl.perBankWrBursts::6 0 # Per bank write bursts |
| system.mem_ctrl.perBankWrBursts::7 5 # Per bank write bursts |
| system.mem_ctrl.perBankWrBursts::8 0 # Per bank write bursts |
| system.mem_ctrl.perBankWrBursts::9 7 # Per bank write bursts |
| system.mem_ctrl.perBankWrBursts::10 0 # Per bank write bursts |
| system.mem_ctrl.perBankWrBursts::11 2 # Per bank write bursts |
| system.mem_ctrl.perBankWrBursts::12 30 # Per bank write bursts |
| system.mem_ctrl.perBankWrBursts::13 0 # Per bank write bursts |
| system.mem_ctrl.perBankWrBursts::14 19 # Per bank write bursts |
| system.mem_ctrl.perBankWrBursts::15 1 # Per bank write bursts |
| system.mem_ctrl.numRdRetry 0 # Number of times read queue was full causing retry |
| system.mem_ctrl.numWrRetry 0 # Number of times write queue was full causing retry |
| system.mem_ctrl.totGap 423050000 # Total gap between requests |
| system.mem_ctrl.readPktSize::0 79 # Read request sizes (log2) |
| system.mem_ctrl.readPktSize::1 1 # Read request sizes (log2) |
| system.mem_ctrl.readPktSize::2 6698 # Read request sizes (log2) |
| system.mem_ctrl.readPktSize::3 0 # Read request sizes (log2) |
| system.mem_ctrl.readPktSize::4 0 # Read request sizes (log2) |
| system.mem_ctrl.readPktSize::5 0 # Read request sizes (log2) |
| system.mem_ctrl.readPktSize::6 0 # Read request sizes (log2) |
| system.mem_ctrl.writePktSize::0 1 # Write request sizes (log2) |
| system.mem_ctrl.writePktSize::1 0 # Write request sizes (log2) |
| system.mem_ctrl.writePktSize::2 900 # Write request sizes (log2) |
| system.mem_ctrl.writePktSize::3 0 # Write request sizes (log2) |
| system.mem_ctrl.writePktSize::4 0 # Write request sizes (log2) |
| system.mem_ctrl.writePktSize::5 0 # Write request sizes (log2) |
| system.mem_ctrl.writePktSize::6 0 # Write request sizes (log2) |
| system.mem_ctrl.rdQLenPdf::0 6683 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::1 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::2 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::3 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::4 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::5 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::6 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::7 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::8 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::9 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::10 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::11 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::12 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::13 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::14 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::15 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::16 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::17 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::18 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::19 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::20 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::21 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::22 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::23 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::24 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::25 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::26 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::27 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::28 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::29 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::30 0 # What read queue length does an incoming req see |
| system.mem_ctrl.rdQLenPdf::31 0 # What read queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::0 1 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::1 1 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::2 1 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::3 1 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::4 1 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::5 1 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::6 1 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::7 1 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::8 1 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::9 1 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::10 1 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::11 1 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::12 1 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::13 1 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::14 1 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::15 1 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::16 1 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::17 5 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::18 5 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::19 5 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::20 5 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::21 5 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::22 5 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::23 5 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::24 5 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::25 5 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::26 5 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::27 5 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::28 5 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::29 4 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::30 4 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::31 4 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::32 4 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::33 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::34 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::35 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::36 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::37 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::38 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::39 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::40 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::41 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::42 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::43 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::44 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::45 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::46 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::47 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::48 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::49 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::50 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::51 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::52 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::53 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::54 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::55 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::56 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::57 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::58 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::59 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::60 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::61 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::62 0 # What write queue length does an incoming req see |
| system.mem_ctrl.wrQLenPdf::63 0 # What write queue length does an incoming req see |
| system.mem_ctrl.bytesPerActivate::samples 846 # Bytes accessed per row activation |
| system.mem_ctrl.bytesPerActivate::mean 508.141844 # Bytes accessed per row activation |
| system.mem_ctrl.bytesPerActivate::gmean 296.960814 # Bytes accessed per row activation |
| system.mem_ctrl.bytesPerActivate::stdev 409.521445 # Bytes accessed per row activation |
| system.mem_ctrl.bytesPerActivate::0-127 262 30.97% 30.97% # Bytes accessed per row activation |
| system.mem_ctrl.bytesPerActivate::128-255 81 9.57% 40.54% # Bytes accessed per row activation |
| system.mem_ctrl.bytesPerActivate::256-383 50 5.91% 46.45% # Bytes accessed per row activation |
| system.mem_ctrl.bytesPerActivate::384-511 56 6.62% 53.07% # Bytes accessed per row activation |
| system.mem_ctrl.bytesPerActivate::512-639 41 4.85% 57.92% # Bytes accessed per row activation |
| system.mem_ctrl.bytesPerActivate::640-767 45 5.32% 63.24% # Bytes accessed per row activation |
| system.mem_ctrl.bytesPerActivate::768-895 28 3.31% 66.55% # Bytes accessed per row activation |
| system.mem_ctrl.bytesPerActivate::896-1023 22 2.60% 69.15% # Bytes accessed per row activation |
| system.mem_ctrl.bytesPerActivate::1024-1151 261 30.85% 100.00% # Bytes accessed per row activation |
| system.mem_ctrl.bytesPerActivate::total 846 # Bytes accessed per row activation |
| system.mem_ctrl.rdPerTurnAround::samples 4 # Reads before turning the bus around for writes |
| system.mem_ctrl.rdPerTurnAround::mean 1385.500000 # Reads before turning the bus around for writes |
| system.mem_ctrl.rdPerTurnAround::gmean 1320.719140 # Reads before turning the bus around for writes |
| system.mem_ctrl.rdPerTurnAround::stdev 457.578044 # Reads before turning the bus around for writes |
| system.mem_ctrl.rdPerTurnAround::768-831 1 25.00% 25.00% # Reads before turning the bus around for writes |
| system.mem_ctrl.rdPerTurnAround::1216-1279 1 25.00% 50.00% # Reads before turning the bus around for writes |
| system.mem_ctrl.rdPerTurnAround::1664-1727 1 25.00% 75.00% # Reads before turning the bus around for writes |
| system.mem_ctrl.rdPerTurnAround::1792-1855 1 25.00% 100.00% # Reads before turning the bus around for writes |
| system.mem_ctrl.rdPerTurnAround::total 4 # Reads before turning the bus around for writes |
| system.mem_ctrl.wrPerTurnAround::samples 4 # Writes before turning the bus around for reads |
| system.mem_ctrl.wrPerTurnAround::mean 16 # Writes before turning the bus around for reads |
| system.mem_ctrl.wrPerTurnAround::gmean 16.000000 # Writes before turning the bus around for reads |
| system.mem_ctrl.wrPerTurnAround::16 4 100.00% 100.00% # Writes before turning the bus around for reads |
| system.mem_ctrl.wrPerTurnAround::total 4 # Writes before turning the bus around for reads |
| system.mem_ctrl.totQLat 74613750 # Total ticks spent queuing |
| system.mem_ctrl.totMemAccLat 199920000 # Total ticks spent from burst creation until serviced by the DRAM |
| system.mem_ctrl.totBusLat 33415000 # Total ticks spent in databus transfers |
| system.mem_ctrl.avgQLat 11164.71 # Average queueing delay per DRAM burst |
| system.mem_ctrl.avgBusLat 5000.00 # Average bus latency per DRAM burst |
| system.mem_ctrl.avgMemAccLat 29914.71 # Average memory access latency per DRAM burst |
| system.mem_ctrl.avgRdBW 1010.84 # Average DRAM read bandwidth in MiByte/s |
| system.mem_ctrl.avgWrBW 9.68 # Average achieved write bandwidth in MiByte/s |
| system.mem_ctrl.avgRdBWSys 63.51 # Average system read bandwidth in MiByte/s |
| system.mem_ctrl.avgWrBWSys 8.51 # Average system write bandwidth in MiByte/s |
| system.mem_ctrl.peakBW 12800.00 # Theoretical peak bandwidth in MiByte/s |
| system.mem_ctrl.busUtil 7.97 # Data bus utilization in percentage |
| system.mem_ctrl.busUtilRead 7.90 # Data bus utilization in percentage for reads |
| system.mem_ctrl.busUtilWrite 0.08 # Data bus utilization in percentage for writes |
| system.mem_ctrl.avgRdQLen 1.00 # Average read queue length when enqueuing |
| system.mem_ctrl.avgWrQLen 22.62 # Average write queue length when enqueuing |
| system.mem_ctrl.readRowHits 5839 # Number of row buffer hits during reads |
| system.mem_ctrl.writeRowHits 57 # Number of row buffer hits during writes |
| system.mem_ctrl.readRowHitRate 87.37 # Row buffer hit rate for reads |
| system.mem_ctrl.writeRowHitRate 61.29 # Row buffer hit rate for writes |
| system.mem_ctrl.avgGap 55091.81 # Average gap between requests |
| system.mem_ctrl.pageHitRate 87.01 # Row buffer hit rate, read and write combined |
| system.mem_ctrl_0.actEnergy 985320 # Energy for activate commands per rank (pJ) |
| system.mem_ctrl_0.preEnergy 519915 # Energy for precharge commands per rank (pJ) |
| system.mem_ctrl_0.readEnergy 8061060 # Energy for read commands per rank (pJ) |
| system.mem_ctrl_0.writeEnergy 26100 # Energy for write commands per rank (pJ) |
| system.mem_ctrl_0.refreshEnergy 33190560.000000 # Energy for refresh commands per rank (pJ) |
| system.mem_ctrl_0.actBackEnergy 21232500 # Energy for active background per rank (pJ) |
| system.mem_ctrl_0.preBackEnergy 1932000 # Energy for precharge background per rank (pJ) |
| system.mem_ctrl_0.actPowerDownEnergy 84890100 # Energy for active power-down per rank (pJ) |
| system.mem_ctrl_0.prePowerDownEnergy 43723680 # Energy for precharge power-down per rank (pJ) |
| system.mem_ctrl_0.selfRefreshEnergy 22684200 # Energy for self refresh per rank (pJ) |
| system.mem_ctrl_0.totalEnergy 217245435 # Total energy per rank (pJ) |
| system.mem_ctrl_0.averagePower 513.427832 # Core power per rank (mW) |
| system.mem_ctrl_0.totalIdleTime 369366500 # Total Idle time Per DRAM Rank |
| system.mem_ctrl_0.memoryStateTime::IDLE 2976000 # Time in different power states |
| system.mem_ctrl_0.memoryStateTime::REF 14106000 # Time in different power states |
| system.mem_ctrl_0.memoryStateTime::SREF 71507250 # Time in different power states |
| system.mem_ctrl_0.memoryStateTime::PRE_PDN 113857500 # Time in different power states |
| system.mem_ctrl_0.memoryStateTime::ACT 34569250 # Time in different power states |
| system.mem_ctrl_0.memoryStateTime::ACT_PDN 186111000 # Time in different power states |
| system.mem_ctrl_1.actEnergy 5090820 # Energy for activate commands per rank (pJ) |
| system.mem_ctrl_1.preEnergy 2690655 # Energy for precharge commands per rank (pJ) |
| system.mem_ctrl_1.readEnergy 39648420 # Energy for read commands per rank (pJ) |
| system.mem_ctrl_1.writeEnergy 307980 # Energy for write commands per rank (pJ) |
| system.mem_ctrl_1.refreshEnergy 33190560.000000 # Energy for refresh commands per rank (pJ) |
| system.mem_ctrl_1.actBackEnergy 77391750 # Energy for active background per rank (pJ) |
| system.mem_ctrl_1.preBackEnergy 1169760 # Energy for precharge background per rank (pJ) |
| system.mem_ctrl_1.actPowerDownEnergy 113578770 # Energy for active power-down per rank (pJ) |
| system.mem_ctrl_1.prePowerDownEnergy 493920 # Energy for precharge power-down per rank (pJ) |
| system.mem_ctrl_1.selfRefreshEnergy 0 # Energy for self refresh per rank (pJ) |
| system.mem_ctrl_1.totalEnergy 273562635 # Total energy per rank (pJ) |
| system.mem_ctrl_1.averagePower 646.525303 # Core power per rank (mW) |
| system.mem_ctrl_1.totalIdleTime 250424500 # Total Idle time Per DRAM Rank |
| system.mem_ctrl_1.memoryStateTime::IDLE 900000 # Time in different power states |
| system.mem_ctrl_1.memoryStateTime::REF 14040000 # Time in different power states |
| system.mem_ctrl_1.memoryStateTime::SREF 0 # Time in different power states |
| system.mem_ctrl_1.memoryStateTime::PRE_PDN 1291250 # Time in different power states |
| system.mem_ctrl_1.memoryStateTime::ACT 157762500 # Time in different power states |
| system.mem_ctrl_1.memoryStateTime::ACT_PDN 249133250 # Time in different power states |
| system.pwrStateResidencyTicks::UNDEFINED 423127000 # Cumulative time (in ticks) in various power states |
| system.cpu.dtb.read_hits 0 # DTB read hits |
| system.cpu.dtb.read_misses 0 # DTB read misses |
| system.cpu.dtb.read_accesses 0 # DTB read accesses |
| system.cpu.dtb.write_hits 0 # DTB write hits |
| system.cpu.dtb.write_misses 0 # DTB write misses |
| system.cpu.dtb.write_accesses 0 # DTB write accesses |
| system.cpu.dtb.hits 0 # DTB hits |
| system.cpu.dtb.misses 0 # DTB misses |
| system.cpu.dtb.accesses 0 # DTB accesses |
| system.cpu.itb.read_hits 0 # DTB read hits |
| system.cpu.itb.read_misses 0 # DTB read misses |
| system.cpu.itb.read_accesses 0 # DTB read accesses |
| system.cpu.itb.write_hits 0 # DTB write hits |
| system.cpu.itb.write_misses 0 # DTB write misses |
| system.cpu.itb.write_accesses 0 # DTB write accesses |
| system.cpu.itb.hits 0 # DTB hits |
| system.cpu.itb.misses 0 # DTB misses |
| system.cpu.itb.accesses 0 # DTB accesses |
| system.cpu.workload.numSyscalls 7 # Number of system calls |
| system.cpu.pwrStateResidencyTicks::ON 423127000 # Cumulative time (in ticks) in various power states |
| system.cpu.numCycles 423127 # number of cpu cycles simulated |
| system.cpu.numWorkItemsStarted 0 # number of work items this cpu started |
| system.cpu.numWorkItemsCompleted 0 # number of work items this cpu completed |
| system.cpu.committedInsts 5641 # Number of instructions committed |
| system.cpu.committedOps 5641 # Number of ops (including micro ops) committed |
| system.cpu.num_int_alu_accesses 4957 # Number of integer alu accesses |
| system.cpu.num_fp_alu_accesses 2 # Number of float alu accesses |
| system.cpu.num_func_calls 191 # number of times a function call or return occured |
| system.cpu.num_conditional_control_insts 651 # number of instructions that are conditional controls |
| system.cpu.num_int_insts 4957 # number of integer instructions |
| system.cpu.num_fp_insts 2 # number of float instructions |
| system.cpu.num_int_register_reads 7072 # number of times the integer registers were read |
| system.cpu.num_int_register_writes 3291 # number of times the integer registers were written |
| system.cpu.num_fp_register_reads 3 # number of times the floating registers were read |
| system.cpu.num_fp_register_writes 1 # number of times the floating registers were written |
| system.cpu.num_mem_refs 2037 # number of memory refs |
| system.cpu.num_load_insts 1135 # Number of load instructions |
| system.cpu.num_store_insts 902 # Number of store instructions |
| system.cpu.num_idle_cycles 0 # Number of idle cycles |
| system.cpu.num_busy_cycles 423127 # Number of busy cycles |
| system.cpu.not_idle_fraction 1 # Percentage of non-idle cycles |
| system.cpu.idle_fraction 0 # Percentage of idle cycles |
| system.cpu.Branches 886 # Number of branches fetched |
| system.cpu.op_class::No_OpClass 641 11.36% 11.36% # Class of executed instruction |
| system.cpu.op_class::IntAlu 2960 52.46% 63.82% # Class of executed instruction |
| system.cpu.op_class::IntMult 2 0.04% 63.86% # Class of executed instruction |
| system.cpu.op_class::IntDiv 0 0.00% 63.86% # Class of executed instruction |
| system.cpu.op_class::FloatAdd 2 0.04% 63.90% # Class of executed instruction |
| system.cpu.op_class::FloatCmp 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::FloatCvt 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::FloatMult 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::FloatMultAcc 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::FloatDiv 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::FloatMisc 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::FloatSqrt 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdAdd 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdAddAcc 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdAlu 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdCmp 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdCvt 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdMisc 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdMult 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdMultAcc 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdShift 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdShiftAcc 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdSqrt 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdFloatAdd 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdFloatAlu 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdFloatCmp 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdFloatCvt 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdFloatDiv 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdFloatMisc 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdFloatMult 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdFloatMultAcc 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::SimdFloatSqrt 0 0.00% 63.90% # Class of executed instruction |
| system.cpu.op_class::MemRead 1135 20.12% 84.01% # Class of executed instruction |
| system.cpu.op_class::MemWrite 902 15.99% 100.00% # Class of executed instruction |
| system.cpu.op_class::FloatMemRead 0 0.00% 100.00% # Class of executed instruction |
| system.cpu.op_class::FloatMemWrite 0 0.00% 100.00% # Class of executed instruction |
| system.cpu.op_class::IprAccess 0 0.00% 100.00% # Class of executed instruction |
| system.cpu.op_class::InstPrefetch 0 0.00% 100.00% # Class of executed instruction |
| system.cpu.op_class::total 5642 # Class of executed instruction |
| system.membus.snoop_filter.tot_requests 0 # Total number of requests made to the snoop filter. |
| system.membus.snoop_filter.hit_single_requests 0 # Number of requests hitting in the snoop filter with a single holder of the requested data. |
| system.membus.snoop_filter.hit_multi_requests 0 # Number of requests hitting in the snoop filter with multiple (>1) holders of the requested data. |
| system.membus.snoop_filter.tot_snoops 0 # Total number of snoops made to the snoop filter. |
| system.membus.snoop_filter.hit_single_snoops 0 # Number of snoops hitting in the snoop filter with a single holder of the requested data. |
| system.membus.snoop_filter.hit_multi_snoops 0 # Number of snoops hitting in the snoop filter with multiple (>1) holders of the requested data. |
| system.membus.pwrStateResidencyTicks::UNDEFINED 423127000 # Cumulative time (in ticks) in various power states |
| system.membus.trans_dist::ReadReq 6778 # Transaction distribution |
| system.membus.trans_dist::ReadResp 6777 # Transaction distribution |
| system.membus.trans_dist::WriteReq 901 # Transaction distribution |
| system.membus.trans_dist::WriteResp 901 # Transaction distribution |
| system.membus.pkt_count_system.cpu.icache_port::system.mem_ctrl.port 11285 # Packet count per connected master and slave (bytes) |
| system.membus.pkt_count_system.cpu.dcache_port::system.mem_ctrl.port 4072 # Packet count per connected master and slave (bytes) |
| system.membus.pkt_count::total 15357 # Packet count per connected master and slave (bytes) |
| system.membus.pkt_size_system.cpu.icache_port::system.mem_ctrl.port 22568 # Cumulative packet size per connected master and slave (bytes) |
| system.membus.pkt_size_system.cpu.dcache_port::system.mem_ctrl.port 7902 # Cumulative packet size per connected master and slave (bytes) |
| system.membus.pkt_size::total 30470 # Cumulative packet size per connected master and slave (bytes) |
| system.membus.snoops 0 # Total snoops (count) |
| system.membus.snoopTraffic 0 # Total snoop traffic (bytes) |
| system.membus.snoop_fanout::samples 7679 # Request fanout histogram |
| system.membus.snoop_fanout::mean 0 # Request fanout histogram |
| system.membus.snoop_fanout::stdev 0 # Request fanout histogram |
| system.membus.snoop_fanout::underflows 0 0.00% 0.00% # Request fanout histogram |
| system.membus.snoop_fanout::0 7679 100.00% 100.00% # Request fanout histogram |
| system.membus.snoop_fanout::1 0 0.00% 100.00% # Request fanout histogram |
| system.membus.snoop_fanout::overflows 0 0.00% 100.00% # Request fanout histogram |
| system.membus.snoop_fanout::min_value 0 # Request fanout histogram |
| system.membus.snoop_fanout::max_value 0 # Request fanout histogram |
| system.membus.snoop_fanout::total 7679 # Request fanout histogram |
| system.membus.reqLayer0.occupancy 8580000 # Layer occupancy (ticks) |
| system.membus.reqLayer0.utilization 2.0 # Layer utilization (%) |
| system.membus.respLayer0.occupancy 12855500 # Layer occupancy (ticks) |
| system.membus.respLayer0.utilization 3.0 # Layer utilization (%) |
| system.membus.respLayer1.occupancy 3550250 # Layer occupancy (ticks) |
| system.membus.respLayer1.utilization 0.8 # Layer utilization (%) |
| |
| ---------- End Simulation Statistics ---------- |
