| /* |
| * Copyright (c) 1999-2005 Mark D. Hill and David A. Wood |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| // CoherenceRequestType |
| enumeration(CoherenceRequestType, desc="...") { |
| GETX, desc="Get eXclusive"; |
| GETS, desc="Get Shared"; |
| PUTX, desc="Put eXclusive"; |
| WB_ACK, desc="Writeback ack"; |
| WB_NACK, desc="Writeback neg. ack"; |
| INV, desc="Invalidation"; |
| } |
| |
| // CoherenceResponseType |
| enumeration(CoherenceResponseType, desc="...") { |
| ACK, desc="ACKnowledgment, responder doesn't have a copy"; |
| DATA, desc="Data"; |
| DATA_EXCLUSIVE_CLEAN, desc="Data, no other processor has a copy, data is clean"; |
| DATA_EXCLUSIVE_DIRTY, desc="Data, no other processor has a copy, data is dirty"; |
| UNBLOCK, desc="Unblock"; |
| UNBLOCK_EXCLUSIVE, desc="Unblock, we're in E/M"; |
| WRITEBACK_CLEAN, desc="Clean writeback (no data)"; |
| WRITEBACK_DIRTY, desc="Dirty writeback (contains data)"; |
| WRITEBACK, desc="Generic writeback (contains data)"; |
| } |
| |
| // RequestMsg (and also forwarded requests) |
| structure(RequestMsg, desc="...", interface="Message") { |
| Addr addr, desc="Physical address for this request"; |
| CoherenceRequestType Type, desc="Type of request (GetS, GetX, PutX, etc)"; |
| MachineID Requestor, desc="Node who initiated the request"; |
| NetDest Destination, desc="Multicast destination mask"; |
| DataBlock DataBlk, desc="data for the cache line"; |
| MessageSizeType MessageSize, desc="size category of the message"; |
| |
| bool functionalRead(Packet *pkt) { |
| // Valid data block is only present in PUTX messages |
| if (Type == CoherenceRequestType:PUTX) { |
| return testAndRead(addr, DataBlk, pkt); |
| } |
| return false; |
| } |
| |
| bool functionalWrite(Packet *pkt) { |
| // No check on message type required since the protocol should read |
| // data block from only those messages that contain valid data |
| return testAndWrite(addr, DataBlk, pkt); |
| } |
| } |
| |
| // ResponseMsg (and also unblock requests) |
| structure(ResponseMsg, desc="...", interface="Message") { |
| Addr addr, desc="Physical address for this request"; |
| CoherenceResponseType Type, desc="Type of response (Ack, Data, etc)"; |
| MachineID Sender, desc="Node who sent the data"; |
| NetDest Destination, desc="Node to whom the data is sent"; |
| DataBlock DataBlk, desc="data for the cache line"; |
| bool Dirty, desc="Is the data dirty (different than memory)?"; |
| MessageSizeType MessageSize, desc="size category of the message"; |
| |
| bool functionalRead(Packet *pkt) { |
| // A check on message type should appear here so that only those |
| // messages that contain data |
| return testAndRead(addr, DataBlk, pkt); |
| } |
| |
| bool functionalWrite(Packet *pkt) { |
| // No check on message type required since the protocol should read |
| // data block from only those messages that contain valid data |
| return testAndWrite(addr, DataBlk, pkt); |
| } |
| } |
| |
| enumeration(DMARequestType, desc="...", default="DMARequestType_NULL") { |
| READ, desc="Memory Read"; |
| WRITE, desc="Memory Write"; |
| NULL, desc="Invalid"; |
| } |
| |
| enumeration(DMAResponseType, desc="...", default="DMAResponseType_NULL") { |
| DATA, desc="DATA read"; |
| ACK, desc="ACK write"; |
| NULL, desc="Invalid"; |
| } |
| |
| structure(DMARequestMsg, desc="...", interface="Message") { |
| DMARequestType Type, desc="Request type (read/write)"; |
| Addr PhysicalAddress, desc="Physical address for this request"; |
| Addr LineAddress, desc="Line address for this request"; |
| MachineID Requestor, desc="Node who initiated the request"; |
| NetDest Destination, desc="Destination"; |
| DataBlock DataBlk, desc="DataBlk attached to this request"; |
| int Len, desc="The length of the request"; |
| MessageSizeType MessageSize, desc="size category of the message"; |
| |
| bool functionalRead(Packet *pkt) { |
| return testAndRead(LineAddress, DataBlk, pkt); |
| } |
| |
| bool functionalWrite(Packet *pkt) { |
| return testAndWrite(LineAddress, DataBlk, pkt); |
| } |
| } |
| |
| structure(DMAResponseMsg, desc="...", interface="Message") { |
| DMAResponseType Type, desc="Response type (DATA/ACK)"; |
| Addr PhysicalAddress, desc="Physical address for this request"; |
| Addr LineAddress, desc="Line address for this request"; |
| NetDest Destination, desc="Destination"; |
| DataBlock DataBlk, desc="DataBlk attached to this request"; |
| MessageSizeType MessageSize, desc="size category of the message"; |
| |
| bool functionalRead(Packet *pkt) { |
| return testAndRead(LineAddress, DataBlk, pkt); |
| } |
| |
| bool functionalWrite(Packet *pkt) { |
| return testAndWrite(LineAddress, DataBlk, pkt); |
| } |
| } |