| # Copyright (c) 2010 Advanced Micro Devices, Inc. | |
| # All rights reserved. | |
| # | |
| # Redistribution and use in source and binary forms, with or without | |
| # modification, are permitted provided that the following conditions are | |
| # met: redistributions of source code must retain the above copyright | |
| # notice, this list of conditions and the following disclaimer; | |
| # redistributions in binary form must reproduce the above copyright | |
| # notice, this list of conditions and the following disclaimer in the | |
| # documentation and/or other materials provided with the distribution; | |
| # neither the name of the copyright holders nor the names of its | |
| # contributors may be used to endorse or promote products derived from | |
| # this software without specific prior written permission. | |
| # | |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| # | |
| # Authors: Brad Beckmann | |
| from m5.params import * | |
| from m5.objects import * | |
| from BaseTopology import SimpleTopology | |
| # Creates a Mesh topology with 4 directories, one at each corner. | |
| # One L1 (and L2, depending on the protocol) are connected to each router. | |
| # XY routing is enforced (using link weights) to guarantee deadlock freedom. | |
| class MeshDirCorners_XY(SimpleTopology): | |
| description='MeshDirCorners_XY' | |
| def __init__(self, controllers): | |
| self.nodes = controllers | |
| def makeTopology(self, options, network, IntLink, ExtLink, Router): | |
| nodes = self.nodes | |
| num_routers = options.num_cpus | |
| num_rows = options.mesh_rows | |
| # default values for link latency and router latency. | |
| # Can be over-ridden on a per link/router basis | |
| link_latency = options.link_latency # used by simple and garnet | |
| router_latency = options.router_latency # only used by garnet | |
| # First determine which nodes are cache cntrls vs. dirs vs. dma | |
| cache_nodes = [] | |
| dir_nodes = [] | |
| dma_nodes = [] | |
| for node in nodes: | |
| if node.type == 'L1Cache_Controller' or \ | |
| node.type == 'L2Cache_Controller': | |
| cache_nodes.append(node) | |
| elif node.type == 'Directory_Controller': | |
| dir_nodes.append(node) | |
| elif node.type == 'DMA_Controller': | |
| dma_nodes.append(node) | |
| # Obviously the number or rows must be <= the number of routers | |
| # and evenly divisible. Also the number of caches must be a | |
| # multiple of the number of routers and the number of directories | |
| # must be four. | |
| assert(num_rows > 0 and num_rows <= num_routers) | |
| num_columns = int(num_routers / num_rows) | |
| assert(num_columns * num_rows == num_routers) | |
| caches_per_router, remainder = divmod(len(cache_nodes), num_routers) | |
| assert(remainder == 0) | |
| assert(len(dir_nodes) == 4) | |
| # Create the routers in the mesh | |
| routers = [Router(router_id=i, latency = router_latency) \ | |
| for i in range(num_routers)] | |
| network.routers = routers | |
| # link counter to set unique link ids | |
| link_count = 0 | |
| # Connect each cache controller to the appropriate router | |
| ext_links = [] | |
| for (i, n) in enumerate(cache_nodes): | |
| cntrl_level, router_id = divmod(i, num_routers) | |
| assert(cntrl_level < caches_per_router) | |
| ext_links.append(ExtLink(link_id=link_count, ext_node=n, | |
| int_node=routers[router_id], | |
| latency = link_latency)) | |
| link_count += 1 | |
| # Connect the dir nodes to the corners. | |
| ext_links.append(ExtLink(link_id=link_count, ext_node=dir_nodes[0], | |
| int_node=routers[0], | |
| latency = link_latency)) | |
| link_count += 1 | |
| ext_links.append(ExtLink(link_id=link_count, ext_node=dir_nodes[1], | |
| int_node=routers[num_columns - 1], | |
| latency = link_latency)) | |
| link_count += 1 | |
| ext_links.append(ExtLink(link_id=link_count, ext_node=dir_nodes[2], | |
| int_node=routers[num_routers - num_columns], | |
| latency = link_latency)) | |
| link_count += 1 | |
| ext_links.append(ExtLink(link_id=link_count, ext_node=dir_nodes[3], | |
| int_node=routers[num_routers - 1], | |
| latency = link_latency)) | |
| link_count += 1 | |
| # Connect the dma nodes to router 0. These should only be DMA nodes. | |
| for (i, node) in enumerate(dma_nodes): | |
| assert(node.type == 'DMA_Controller') | |
| ext_links.append(ExtLink(link_id=link_count, ext_node=node, | |
| int_node=routers[0], | |
| latency = link_latency)) | |
| network.ext_links = ext_links | |
| # Create the mesh links. | |
| int_links = [] | |
| # East output to West input links (weight = 1) | |
| for row in range(num_rows): | |
| for col in range(num_columns): | |
| if (col + 1 < num_columns): | |
| east_out = col + (row * num_columns) | |
| west_in = (col + 1) + (row * num_columns) | |
| int_links.append(IntLink(link_id=link_count, | |
| src_node=routers[east_out], | |
| dst_node=routers[west_in], | |
| src_outport="East", | |
| dst_inport="West", | |
| latency = link_latency, | |
| weight=1)) | |
| link_count += 1 | |
| # West output to East input links (weight = 1) | |
| for row in range(num_rows): | |
| for col in range(num_columns): | |
| if (col + 1 < num_columns): | |
| east_in = col + (row * num_columns) | |
| west_out = (col + 1) + (row * num_columns) | |
| int_links.append(IntLink(link_id=link_count, | |
| src_node=routers[west_out], | |
| dst_node=routers[east_in], | |
| src_outport="West", | |
| dst_inport="East", | |
| latency = link_latency, | |
| weight=1)) | |
| link_count += 1 | |
| # North output to South input links (weight = 2) | |
| for col in range(num_columns): | |
| for row in range(num_rows): | |
| if (row + 1 < num_rows): | |
| north_out = col + (row * num_columns) | |
| south_in = col + ((row + 1) * num_columns) | |
| int_links.append(IntLink(link_id=link_count, | |
| src_node=routers[north_out], | |
| dst_node=routers[south_in], | |
| src_outport="North", | |
| dst_inport="South", | |
| latency = link_latency, | |
| weight=2)) | |
| link_count += 1 | |
| # South output to North input links (weight = 2) | |
| for col in range(num_columns): | |
| for row in range(num_rows): | |
| if (row + 1 < num_rows): | |
| north_in = col + (row * num_columns) | |
| south_out = col + ((row + 1) * num_columns) | |
| int_links.append(IntLink(link_id=link_count, | |
| src_node=routers[south_out], | |
| dst_node=routers[north_in], | |
| src_outport="South", | |
| dst_inport="North", | |
| latency = link_latency, | |
| weight=2)) | |
| link_count += 1 | |
| network.int_links = int_links |