| # Name of model to be built and evaluated | |
| ModelName = PhotonicClos | |
| # Query string to choose what to evaluate (use '\' to enable multiline config) | |
| QueryString = \ | |
| Energy>>PhotonicClos:AvgUnicast@1 \ | |
| NddPower>>PhotonicClos:RingTuning@0 \ | |
| NddPower>>PhotonicClos:Laser@0 \ | |
| NddPower>>PhotonicClos:Leakage@0 \ | |
| Area>>PhotonicClos:Active@0 \ | |
| Area>>PhotonicClos:GlobalWire@0 \ | |
| Area>>PhotonicClos:Photonic@0 \ | |
| # Injection rate (# flits per cycle per site), assuming that the network is not | |
| # saturated and uniform random traffic | |
| InjectionRate = 0.1 | |
| # Evaluation string | |
| EvaluateString = \ | |
| dynamic = $(InjectionRate) * $(NumberInputSites) * $(Frequency) * $(Energy>>PhotonicClos:AvgUnicast); \ | |
| leakage = $(NddPower>>PhotonicClos:Leakage); \ | |
| ring_heating = $(NddPower>>PhotonicClos:RingTuning); \ | |
| laser = $(NddPower>>PhotonicClos:Laser); \ | |
| total = dynamic + leakage + ring_heating + laser; \ | |
| energy_per_bit = total / ($(InjectionRate) * $(Frequency) * $(NumberInputSites) * $(NumberBitsPerFlit)); \ | |
| active_area = $(Area>>PhotonicClos:Active); \ | |
| global_area = $(Area>>PhotonicClos:GlobalWire); \ | |
| photonic_area = $(Area>>PhotonicClos:Photonic); \ | |
| print "Photonic Clos Network:"; \ | |
| print " Dynamic power: " dynamic; \ | |
| print " Leakage power: " leakage; \ | |
| print " Laser power: " laser; \ | |
| print " Ring Heater Power: " ring_heating; \ | |
| print " Total power: " total; \ | |
| print " Energy per bit: " energy_per_bit; \ | |
| print " Active Area: " active_area; \ | |
| print " Global Wire Area: " global_area; \ | |
| print " Photonic Area: " photonic_area; \ | |
| # Technology file (see other models in tech/models) | |
| ElectricalTechModelFilename = tech/tech_models/Bulk45LVT.model | |
| PhotonicTechModelFilename = tech/tech_models/Photonics.model | |
| ############################################################################### | |
| # Timing optimization | |
| ############################################################################### | |
| # Individual network components already optimize for timing, no need to do it | |
| # at the top-level | |
| # Operating frequency (Hz) | |
| Frequency = 4e9 | |
| # NOTE: If you adjust Frequency, make sure you adjust SWSR->LinkDataRate | |
| # to make sure it is >= Frequency, since the model doesn't support serialization | |
| # ratios < 1. | |
| # Report timing | |
| IsReportTiming = true | |
| # Report timing | |
| ReportTiming->StartNetNames = [CK] | |
| ############################################################################### | |
| # Model specifications | |
| ############################################################################### | |
| # Clos Parameters | |
| # Number of sites that can send | |
| NumberInputSites = 64 | |
| # Number of sites that can receive | |
| NumberOutputSites = 64 | |
| # Bits per flit | |
| NumberBitsPerFlit = 64 | |
| # Number of routers at each stage | |
| NumberIngressRouters = 8 | |
| NumberMiddleRouters = 8 | |
| NumberEgressRouters = 8 | |
| # Router-specific parameters (see dsent.cfg.router for descriptions) | |
| Router->NumberVirtualNetworks = 3 | |
| Router->NumberVirtualChannelsPerVirtualNetwork = [1,1,1] | |
| Router->NumberBuffersPerVirtualChannel = [4,1,1] | |
| Router->InputPort->BufferModel = DFFRAM | |
| Router->CrossbarModel = MultiplexerCrossbar | |
| Router->SwitchAllocator->ArbiterModel = MatrixArbiter | |
| Router->ClockTreeModel = BroadcastHTree | |
| Router->ClockTree->NumberLevels = 6 | |
| Router->ClockTree->WireLayer = Intermediate | |
| Router->ClockTree->WireWidthMultiplier = 1.0 | |
| # Electrical Link-specific parameters | |
| Link->WireLayer = Global | |
| Link->WireWidthMultiplier = 1.0 | |
| Link->WireSpacingMultiplier = 1.0 | |
| # Photonic link-specfic parameters | |
| # Link data rate (Hz), must be >= Frequency of the network | |
| SWSR->LinkDataRate = 4e9 | |
| # Optimize the laser/modulator power balance for the given utilization | |
| SWSR->OptUtil = 0.5 | |
| # Type of the laser. Current valid choices are: (Standard, Throttled) | |
| # Note, if you change this to throttled, the laser gets lumped into dynamic | |
| # power, so change the Ndd power query for laser appropriately | |
| SWSR->LaserType = Standard | |
| # Ring tuning method. Current valid choices are: | |
| # (FullThermal, AthermalWithTrim, ThermalWithBitReshuffle, ElectricalAssistWithBitReshuffle) | |
| SWSR->RingTuningMethod = ThermalWithBitReshuffle | |
| # Physical organization properties | |
| # Note: This model assumes a square network layout | |
| InputSitePitch = 1e-3 | |
| OutputSitePitch = 1e-3 | |