| /* | |
| * Copyright (c) 2004-2005 The Regents of The University of Michigan | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are | |
| * met: redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer; | |
| * redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution; | |
| * neither the name of the copyright holders nor the names of its | |
| * contributors may be used to endorse or promote products derived from | |
| * this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| * Authors: Ali Saidi | |
| * Andrew Schultz | |
| * Miguel Serrano | |
| */ | |
| /** @file | |
| * Tsunami I/O including PIC, PIT, RTC, DMA | |
| */ | |
| #include "dev/alpha/tsunami_io.hh" | |
| #include <sys/time.h> | |
| #include <deque> | |
| #include <string> | |
| #include <vector> | |
| #include "base/time.hh" | |
| #include "base/trace.hh" | |
| #include "config/the_isa.hh" | |
| #include "debug/Tsunami.hh" | |
| #include "dev/alpha/tsunami.hh" | |
| #include "dev/alpha/tsunami_cchip.hh" | |
| #include "dev/alpha/tsunamireg.h" | |
| #include "dev/rtcreg.h" | |
| #include "mem/packet.hh" | |
| #include "mem/packet_access.hh" | |
| #include "mem/port.hh" | |
| #include "sim/system.hh" | |
| // clang complains about std::set being overloaded with Packet::set if | |
| // we open up the entire namespace std | |
| using std::string; | |
| using std::ostream; | |
| //Should this be AlphaISA? | |
| using namespace TheISA; | |
| TsunamiIO::RTC::RTC(const string &n, const TsunamiIOParams *p) | |
| : MC146818(p->tsunami, n, p->time, p->year_is_bcd, p->frequency), | |
| tsunami(p->tsunami) | |
| { | |
| } | |
| TsunamiIO::TsunamiIO(const Params *p) | |
| : BasicPioDevice(p, 0x100), tsunami(p->tsunami), | |
| pitimer(this, p->name + "pitimer"), rtc(p->name + ".rtc", p) | |
| { | |
| // set the back pointer from tsunami to myself | |
| tsunami->io = this; | |
| timerData = 0; | |
| picr = 0; | |
| picInterrupting = false; | |
| } | |
| Tick | |
| TsunamiIO::frequency() const | |
| { | |
| return SimClock::Frequency / params()->frequency; | |
| } | |
| Tick | |
| TsunamiIO::read(PacketPtr pkt) | |
| { | |
| assert(pkt->getAddr() >= pioAddr && pkt->getAddr() < pioAddr + pioSize); | |
| Addr daddr = pkt->getAddr() - pioAddr; | |
| DPRINTF(Tsunami, "io read va=%#x size=%d IOPorrt=%#x\n", pkt->getAddr(), | |
| pkt->getSize(), daddr); | |
| if (pkt->getSize() == sizeof(uint8_t)) { | |
| switch(daddr) { | |
| // PIC1 mask read | |
| case TSDEV_PIC1_MASK: | |
| pkt->setLE(~mask1); | |
| break; | |
| case TSDEV_PIC2_MASK: | |
| pkt->setLE(~mask2); | |
| break; | |
| case TSDEV_PIC1_ISR: | |
| // !!! If this is modified 64bit case needs to be too | |
| // Pal code has to do a 64 bit physical read because there is | |
| // no load physical byte instruction | |
| pkt->setLE(picr); | |
| break; | |
| case TSDEV_PIC2_ISR: | |
| // PIC2 not implemnted... just return 0 | |
| pkt->setLE(0x00); | |
| break; | |
| case TSDEV_TMR0_DATA: | |
| pkt->setLE(pitimer.readCounter(0)); | |
| break; | |
| case TSDEV_TMR1_DATA: | |
| pkt->setLE(pitimer.readCounter(1)); | |
| break; | |
| case TSDEV_TMR2_DATA: | |
| pkt->setLE(pitimer.readCounter(2)); | |
| break; | |
| case TSDEV_RTC_DATA: | |
| pkt->setLE(rtc.readData(rtcAddr)); | |
| break; | |
| case TSDEV_CTRL_PORTB: | |
| if (pitimer.outputHigh(2)) | |
| pkt->setLE(PORTB_SPKR_HIGH); | |
| else | |
| pkt->setLE(0x00); | |
| break; | |
| default: | |
| panic("I/O Read - va%#x size %d\n", pkt->getAddr(), pkt->getSize()); | |
| } | |
| } else if (pkt->getSize() == sizeof(uint64_t)) { | |
| if (daddr == TSDEV_PIC1_ISR) | |
| pkt->setLE<uint64_t>(picr); | |
| else | |
| panic("I/O Read - invalid addr - va %#x size %d\n", | |
| pkt->getAddr(), pkt->getSize()); | |
| } else { | |
| panic("I/O Read - invalid size - va %#x size %d\n", pkt->getAddr(), pkt->getSize()); | |
| } | |
| pkt->makeAtomicResponse(); | |
| return pioDelay; | |
| } | |
| Tick | |
| TsunamiIO::write(PacketPtr pkt) | |
| { | |
| assert(pkt->getAddr() >= pioAddr && pkt->getAddr() < pioAddr + pioSize); | |
| Addr daddr = pkt->getAddr() - pioAddr; | |
| DPRINTF(Tsunami, "io write - va=%#x size=%d IOPort=%#x Data=%#x\n", | |
| pkt->getAddr(), pkt->getSize(), pkt->getAddr() & 0xfff, | |
| (uint32_t)pkt->getLE<uint8_t>()); | |
| assert(pkt->getSize() == sizeof(uint8_t)); | |
| switch(daddr) { | |
| case TSDEV_PIC1_MASK: | |
| mask1 = ~(pkt->getLE<uint8_t>()); | |
| if ((picr & mask1) && !picInterrupting) { | |
| picInterrupting = true; | |
| tsunami->cchip->postDRIR(55); | |
| DPRINTF(Tsunami, "posting pic interrupt to cchip\n"); | |
| } | |
| if ((!(picr & mask1)) && picInterrupting) { | |
| picInterrupting = false; | |
| tsunami->cchip->clearDRIR(55); | |
| DPRINTF(Tsunami, "clearing pic interrupt\n"); | |
| } | |
| break; | |
| case TSDEV_PIC2_MASK: | |
| mask2 = pkt->getLE<uint8_t>(); | |
| //PIC2 Not implemented to interrupt | |
| break; | |
| case TSDEV_PIC1_ACK: | |
| // clear the interrupt on the PIC | |
| picr &= ~(1 << (pkt->getLE<uint8_t>() & 0xF)); | |
| if (!(picr & mask1)) | |
| tsunami->cchip->clearDRIR(55); | |
| break; | |
| case TSDEV_DMA1_MODE: | |
| mode1 = pkt->getLE<uint8_t>(); | |
| break; | |
| case TSDEV_DMA2_MODE: | |
| mode2 = pkt->getLE<uint8_t>(); | |
| break; | |
| case TSDEV_TMR0_DATA: | |
| pitimer.writeCounter(0, pkt->getLE<uint8_t>()); | |
| break; | |
| case TSDEV_TMR1_DATA: | |
| pitimer.writeCounter(1, pkt->getLE<uint8_t>()); | |
| break; | |
| case TSDEV_TMR2_DATA: | |
| pitimer.writeCounter(2, pkt->getLE<uint8_t>()); | |
| break; | |
| case TSDEV_TMR_CTRL: | |
| pitimer.writeControl(pkt->getLE<uint8_t>()); | |
| break; | |
| case TSDEV_RTC_ADDR: | |
| rtcAddr = pkt->getLE<uint8_t>(); | |
| break; | |
| case TSDEV_RTC_DATA: | |
| rtc.writeData(rtcAddr, pkt->getLE<uint8_t>()); | |
| break; | |
| case TSDEV_KBD: | |
| case TSDEV_DMA1_CMND: | |
| case TSDEV_DMA2_CMND: | |
| case TSDEV_DMA1_MMASK: | |
| case TSDEV_DMA2_MMASK: | |
| case TSDEV_PIC2_ACK: | |
| case TSDEV_DMA1_RESET: | |
| case TSDEV_DMA2_RESET: | |
| case TSDEV_DMA1_MASK: | |
| case TSDEV_DMA2_MASK: | |
| case TSDEV_CTRL_PORTB: | |
| break; | |
| default: | |
| panic("I/O Write - va%#x size %d data %#x\n", | |
| pkt->getAddr(), pkt->getSize(), pkt->getLE<uint8_t>()); | |
| } | |
| pkt->makeAtomicResponse(); | |
| return pioDelay; | |
| } | |
| void | |
| TsunamiIO::postPIC(uint8_t bitvector) | |
| { | |
| //PIC2 Is not implemented, because nothing of interest there | |
| picr |= bitvector; | |
| if (picr & mask1) { | |
| tsunami->cchip->postDRIR(55); | |
| DPRINTF(Tsunami, "posting pic interrupt to cchip\n"); | |
| } | |
| } | |
| void | |
| TsunamiIO::clearPIC(uint8_t bitvector) | |
| { | |
| //PIC2 Is not implemented, because nothing of interest there | |
| picr &= ~bitvector; | |
| if (!(picr & mask1)) { | |
| tsunami->cchip->clearDRIR(55); | |
| DPRINTF(Tsunami, "clearing pic interrupt to cchip\n"); | |
| } | |
| } | |
| void | |
| TsunamiIO::serialize(CheckpointOut &cp) const | |
| { | |
| SERIALIZE_SCALAR(rtcAddr); | |
| SERIALIZE_SCALAR(timerData); | |
| SERIALIZE_SCALAR(mask1); | |
| SERIALIZE_SCALAR(mask2); | |
| SERIALIZE_SCALAR(mode1); | |
| SERIALIZE_SCALAR(mode2); | |
| SERIALIZE_SCALAR(picr); | |
| SERIALIZE_SCALAR(picInterrupting); | |
| // Serialize the timers | |
| pitimer.serialize("pitimer", cp); | |
| rtc.serialize("rtc", cp); | |
| } | |
| void | |
| TsunamiIO::unserialize(CheckpointIn &cp) | |
| { | |
| UNSERIALIZE_SCALAR(rtcAddr); | |
| UNSERIALIZE_SCALAR(timerData); | |
| UNSERIALIZE_SCALAR(mask1); | |
| UNSERIALIZE_SCALAR(mask2); | |
| UNSERIALIZE_SCALAR(mode1); | |
| UNSERIALIZE_SCALAR(mode2); | |
| UNSERIALIZE_SCALAR(picr); | |
| UNSERIALIZE_SCALAR(picInterrupting); | |
| // Unserialize the timers | |
| pitimer.unserialize("pitimer", cp); | |
| rtc.unserialize("rtc", cp); | |
| } | |
| void | |
| TsunamiIO::startup() | |
| { | |
| rtc.startup(); | |
| pitimer.startup(); | |
| } | |
| TsunamiIO * | |
| TsunamiIOParams::create() | |
| { | |
| return new TsunamiIO(this); | |
| } |