gem5 / testing / jenkins-gem5-prod / d94e5b5d91c1a4f29264bee9c13edbdb70d0417e / . / ext / mcpat / cacti / const.h

/***************************************************************************** | |

* McPAT/CACTI | |

* SOFTWARE LICENSE AGREEMENT | |

* Copyright 2012 Hewlett-Packard Development Company, L.P. | |

* Copyright (c) 2010-2013 Advanced Micro Devices, Inc. | |

* All Rights Reserved | |

* | |

* Redistribution and use in source and binary forms, with or without | |

* modification, are permitted provided that the following conditions are | |

* met: redistributions of source code must retain the above copyright | |

* notice, this list of conditions and the following disclaimer; | |

* redistributions in binary form must reproduce the above copyright | |

* notice, this list of conditions and the following disclaimer in the | |

* documentation and/or other materials provided with the distribution; | |

* neither the name of the copyright holders nor the names of its | |

* contributors may be used to endorse or promote products derived from | |

* this software without specific prior written permission. | |

* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |

* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |

* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |

* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |

* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |

* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |

* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |

* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |

* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |

* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |

* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |

* | |

***************************************************************************/ | |

#ifndef __CONST_H__ | |

#define __CONST_H__ | |

#include <math.h> | |

#include <stdint.h> | |

#include <stdio.h> | |

#include <stdlib.h> | |

#include <string.h> | |

/* The following are things you might want to change | |

* when compiling | |

*/ | |

/* | |

* Address bits in a word, and number of output bits from the cache | |

*/ | |

/* | |

was: #define ADDRESS_BITS 32 | |

now: I'm using 42 bits as in the Power4, | |

since that's bigger then the 36 bits on the Pentium 4 | |

and 40 bits on the Opteron | |

*/ | |

const int ADDRESS_BITS = 42; | |

/*dt: In addition to the tag bits, the tags also include 1 valid bit, 1 dirty bit, 2 bits for a 4-state | |

cache coherency protocoll (MESI), 1 bit for MRU (change this to log(ways) for full LRU). | |

So in total we have 1 + 1 + 2 + 1 = 5 */ | |

const int EXTRA_TAG_BITS = 5; | |

/* limits on the various N parameters */ | |

const unsigned int MAXDATAN = 512; // maximum for Ndwl and Ndbl | |

const unsigned int MAXSUBARRAYS = 1048576; // maximum subarrays for data and tag arrays | |

const unsigned int MAXDATASPD = 256; // maximum for Nspd | |

const unsigned int MAX_COL_MUX = 256; | |

#define ROUTER_TYPES 3 | |

#define WIRE_TYPES 6 | |

const double Cpolywire = 0; | |

/* Threshold voltages (as a proportion of Vdd) | |

If you don't know them, set all values to 0.5 */ | |

#define VTHFA1 0.452 | |

#define VTHFA2 0.304 | |

#define VTHFA3 0.420 | |

#define VTHFA4 0.413 | |

#define VTHFA5 0.405 | |

#define VTHFA6 0.452 | |

#define VSINV 0.452 | |

#define VTHCOMPINV 0.437 | |

#define VTHMUXNAND 0.548 // TODO : this constant must be revisited | |

#define VTHEVALINV 0.452 | |

#define VTHSENSEEXTDRV 0.438 | |

//WmuxdrvNANDn and WmuxdrvNANDp are no longer being used but it's part of the old | |

//delay_comparator function which we are using exactly as it used to be, so just setting these to 0 | |

const double WmuxdrvNANDn = 0; | |

const double WmuxdrvNANDp = 0; | |

/*===================================================================*/ | |

/* | |

* The following are things you probably wouldn't want to change. | |

*/ | |

#define BIGNUM 1e30 | |

#define INF 9999999 | |

#define MAX(a,b) (((a)>(b))?(a):(b)) | |

#define MIN(a,b) (((a)<(b))?(a):(b)) | |

/* Used to communicate with the horowitz model */ | |

#define RISE 1 | |

#define FALL 0 | |

#define NCH 1 | |

#define PCH 0 | |

#define EPSILON 0.5 //v4.1: This constant is being used in order to fix floating point -> integer | |

//conversion problems that were occuring within CACTI. Typical problem that was occuring was | |

//that with different compilers a floating point number like 3.0 would get represented as either | |

//2.9999....or 3.00000001 and then the integer part of the floating point number (3.0) would | |

//be computed differently depending on the compiler. What we are doing now is to replace | |

//int (x) with (int) (x+EPSILON) where EPSILON is 0.5. This would fix such problems. Note that | |

//this works only when x is an integer >= 0. | |

/* | |

* Sheng thinks this is more a solution to solve the simple truncate problem | |

* (http://www.cs.tut.fi/~jkorpela/round.html) rather than the problem mentioned above. | |

* Unfortunately, this solution causes nasty bugs (different results when using O0 and O3). | |

* Moreover, round is not correct in CACTI since when an extra fraction of bit/line is needed, | |

* we need to provide a complete bit/line even the fraction is just 0.01. | |

* So, in later version than 6.5 we use (int)ceil() to get double to int conversion. | |

*/ | |

#define EPSILON2 0.1 | |

#define EPSILON3 0.6 | |

#define MINSUBARRAYROWS 16 //For simplicity in modeling, for the row decoding structure, we assume | |

//that each row predecode block is composed of at least one 2-4 decoder. When the outputs from the | |

//row predecode blocks are combined this means that there are at least 4*4=16 row decode outputs | |

#define MAXSUBARRAYROWS 262144 //Each row predecode block produces a max of 2^9 outputs. So | |

//the maximum number of row decode outputs will be 2^9*2^9 | |

#define MINSUBARRAYCOLS 2 | |

#define MAXSUBARRAYCOLS 262144 | |

#define INV 0 | |

#define NOR 1 | |

#define NAND 2 | |

#define NUMBER_TECH_FLAVORS 4 | |

#define NUMBER_INTERCONNECT_PROJECTION_TYPES 2 //aggressive and conservative | |

//0 = Aggressive projections, 1 = Conservative projections | |

#define NUMBER_WIRE_TYPES 4 //local, semi-global and global | |

//1 = 'Semi-global' wire type, 2 = 'Global' wire type | |

const int dram_cell_tech_flavor = 3; | |

#define VBITSENSEMIN 0.08 //minimum bitline sense voltage is fixed to be 80 mV. | |

#define fopt 4.0 | |

#define INPUT_WIRE_TO_INPUT_GATE_CAP_RATIO 0 | |

#define BUFFER_SEPARATION_LENGTH_MULTIPLIER 1 | |

#define NUMBER_MATS_PER_REDUNDANT_MAT 8 | |

#define NUMBER_STACKED_DIE_LAYERS 1 | |

// this variable can be set to carry out solution optimization for | |

// a maximum area allocation. | |

#define STACKED_DIE_LAYER_ALLOTED_AREA_mm2 0 //6.24 //6.21//71.5 | |

// this variable can also be employed when solution optimization | |

// with maximum area allocation is carried out. | |

#define MAX_PERCENT_AWAY_FROM_ALLOTED_AREA 50 | |

// this variable can also be employed when solution optimization | |

// with maximum area allocation is carried out. | |

#define MIN_AREA_EFFICIENCY 20 | |

// this variable can be employed when solution with a desired | |

// aspect ratio is required. | |

#define STACKED_DIE_LAYER_ASPECT_RATIO 1 | |

// this variable can be employed when solution with a desired | |

// aspect ratio is required. | |

#define MAX_PERCENT_AWAY_FROM_ASPECT_RATIO 101 | |

// this variable can be employed to carry out solution optimization | |

// for a certain target random cycle time. | |

#define TARGET_CYCLE_TIME_ns 1000000000 | |

#define NUMBER_PIPELINE_STAGES 4 | |

// this can be used to model the length of interconnect | |

// between a bank and a crossbar | |

#define LENGTH_INTERCONNECT_FROM_BANK_TO_CROSSBAR 0 //3791 // 2880//micron | |

#define IS_CROSSBAR 0 | |

#define NUMBER_INPUT_PORTS_CROSSBAR 8 | |

#define NUMBER_OUTPUT_PORTS_CROSSBAR 8 | |

#define NUMBER_SIGNALS_PER_PORT_CROSSBAR 256 | |

#define MAT_LEAKAGE_REDUCTION_DUE_TO_SLEEP_TRANSISTORS_FACTOR 1 | |

#define LEAKAGE_REDUCTION_DUE_TO_LONG_CHANNEL_HP_TRANSISTORS_FACTOR 1 | |

#define PAGE_MODE 0 | |

#define MAIN_MEM_PER_CHIP_STANDBY_CURRENT_mA 60 | |

// We are actually not using this variable in the CACTI code. We just want to acknowledge that | |

// this current should be multiplied by the DDR(n) system VDD value to compute the standby power | |

// consumed during precharge. | |

const double VDD_STORAGE_LOSS_FRACTION_WORST = 0.125; | |

const double CU_RESISTIVITY = 0.022; //ohm-micron | |

const double BULK_CU_RESISTIVITY = 0.018; //ohm-micron | |

const double PERMITTIVITY_FREE_SPACE = 8.854e-18; //F/micron | |

const static uint32_t sram_num_cells_wl_stitching_ = 16; | |

const static uint32_t dram_num_cells_wl_stitching_ = 64; | |

const static uint32_t comm_dram_num_cells_wl_stitching_ = 256; | |

const static double num_bits_per_ecc_b_ = 8.0; | |

const double bit_to_byte = 8.0; | |

#define MAX_NUMBER_GATES_STAGE 20 | |

#define MAX_NUMBER_HTREE_NODES 20 | |

#define NAND2_LEAK_STACK_FACTOR 0.2 | |

#define NAND3_LEAK_STACK_FACTOR 0.2 | |

#define NOR2_LEAK_STACK_FACTOR 0.2 | |

#define INV_LEAK_STACK_FACTOR 0.5 | |

#define MAX_NUMBER_ARRAY_PARTITIONS 1000000 | |

// abbreviations used in this project | |

// ---------------------------------- | |

// | |

// num : number | |

// rw : read/write | |

// rd : read | |

// wr : write | |

// se : single-ended | |

// sz : size | |

// F : feature | |

// w : width | |

// h : height or horizontal | |

// v : vertical or velocity | |

enum ram_cell_tech_type_num { | |

itrs_hp = 0, | |

itrs_lstp = 1, | |

itrs_lop = 2, | |

lp_dram = 3, | |

comm_dram = 4 | |

}; | |

const double pppm[4] = {1, 1, 1, 1}; | |

const double pppm_lkg[4] = {0, 1, 1, 0}; | |

const double pppm_dyn[4] = {1, 0, 0, 0}; | |

const double pppm_Isub[4] = {0, 1, 0, 0}; | |

const double pppm_Ig[4] = {0, 0, 1, 0}; | |

const double pppm_sc[4] = {0, 0, 0, 1}; | |

#endif |